need to separate instances/profiles WITHOUT manual profile selection

Similar Questions

• tell me if I need net framework client profile 4 I have nothing from what I've read I don't need.

  could smeone please tell me if I need net framework client profile 4, there is a computer at home, and from what I can tell I don't need her. I downloaded at the same time me, misunderstanding of what it was, I tried to date to remove it but it says I must first of all remove the readme?  I windoiws xp, 86 seems to me it is a position that would use it.    How do we uninstall it because updates are not takeing a reason either. . have you noticed that windows update keeps, at least my's for some reason any. I noticed elsewhere on this forum about updates r repeating themselves.  I appreciate all the help. Thank you

  The other post:

  OK now I have these updates already on my computer, kb2604092, added on 10/05/12, kb2686828, added on 14/06/12 and kb2656369 v2 that they keep appears for me to download them even on microsoft update web page. So what's left to do about it?  In addition, does not update kb2600217 for xp netframework 4. Download but it does not update so it does all the time if you put your computer in the usual way, then what to do? also, what I do an update for card smart base kb909520. I do not have any suppliers or what it is for?

  I have updates to appear that I kb2686828 serv.pk 2 2 installled framework 6/14 and kb26546369v2 Framework 2 ser.pk 2. He always tells me that I've updated, but they are not installed. and here is one that is used to install on the 4 customer profile. I'll tell u more when I only if there is more to say. I see a lot of people r having the same problem.thanks

  Hi cindysanborn,

  To avoid confusion, I closed your other new posts and took note of them here.  Please give us the updates or any other matter in this original thread. :)

  With regard to your question, please take a peek in here with a troubleshooting section.

  I hope this helps!

• How can I select all instances of a component in the timeline at once without manually shift clicking on each instance?

  Title says it all!

  How can I select all instances of a component in the timeline at once without manually shift + click each instance?

  The reason why I want to do this is because I have a video clip with MANY quick cuts. So the clips are cut out and splattered everywhere. I'm color correction now and so I want to be able to select a clip around wherever it exists in the timeline so I can drag the effect on all the at once, without having to search each occurrence of the item in the timeline panel. This lot "select" would make it so I don't miss not all instances of the clip and saving a ton of time going through the timeline and Shift clicking whenever the clip is also up.

  I hope that the PP is smart enough to do this

  Thanks in advance!

  -Tim

  Choose a single instance of the element, perhaps even the first bit... and use the new Master Clip feature... Firstly here is a written explanation and a video tutorial on this operation... This is a great feature.

  Adobe Premiere Pro help. Master Clip effects

  How to apply effects to all instances of a clip. Adobe first Pro CC tutorials

  Neil

• Could not get the user at startup profile selection screen

  Default title: original Desktop

  We use Windows 7 Home premium and we have 3 user profiles (excluding the guest profile that is locked): me, my wife and my daughter. If the computer is off, when I start, need me directly on my desk without invites me to select a user profile or by entering a password. How can I take me to the profile selection screen after starting upwards rather than default to my desktop computer?
  Thank you

  Someone set up your computer so that it goes straight to the office. Here's how you can cancel this:

  1. press Windows + R key on your keyboard.

  2. Enter the following command and press ENTER:

     netplwiz

  3. check the box that requires users to enter a password.

  4. click on OK.

  5. make a note of this for future reference method.

• Is it possible under the EULA to have several virtual machines on a single physical hard disk while using the same OS license or do I need a separate license for each virtual computer?

  I have several programs that are not compatible with my 64 bit Windows 7 operating system.  I would like to run each different software under another virtual machine of VMWare (5 packs of different software programs and 5 different virtual machines of Windows XP).  These would all be installed on your laptop.  I can use the same license of Windows XP for each virtual machine, or do I need a separate XP license for each (different XP in case 5 licenses)?

  It is lifted directly from my EULA:

  1. GRANT OF LICENSE.

  The manufacturer that you grant the following rights, provided that

  comply you with all terms and conditions of this EULA:

  1.1 installation and use.  You may install, use, access,

  display and run one copy of the SOFTWARE on

  THE COMPUTER.  The SOFTWARE may not be used

  by more than two 2-processor both on the

  COMPUTER, unless a greater number is

  indicated on the certificate of authenticity.
  Then...
  This means that as long as you are running two or more instances of XP at the same TIME, you agree? Or does this mean that, after you install once, you have reached your limit?
  I imagine that most people (including those who are running Microsoft!) will say that the second interpretation is correct.
  However...
  If this is the case, anyone their hard drive as a backup to clone strategy would violate the EULA!

• After Firefox update, my gmails opens in separate instances of minimized windows of Firefox. Any suggestions?

  After an automatic update of Firefox, my gmails began to open in separate instances of minimized windows of Firefox. The old way was that any email that I clicked would open full screen in the same instance of Firefox and the same enlarged window. Any suggestions on how to get back to the old way?

  First of all, try updating to the recently released 15 Firefox, see if that solves your problem. Update Firefox to the latest version.

  If it doesn't, try resetting Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• How to close a pop-up open running in the new thread in Teststand without manual intervention?

  Hello

  I'm keycycle in infinite while loop. There are two ways to break out of the loop

  1. click on the 'OK' button on the pop-up that says "complete the event. The pop up is running in a new thread.

  2 increase the value of the parameter "Reset_Count".

  If I choose the first way the sequence runs completely, but if I choose the second way then execution gets stuck in cleaning and waiting for me to click on the button 'OK' Popup.

  So my question is, is there any way by which I can close the popup without manual intervention?

  I have attached the seq, in case you want to see exactly what is happening.

  Thank you

  Hello.

  Yes, replace the TestStand popup a dialog box with custom of LabVIEW.  Here are my first thoughts on a simple method...

  a.) replace the TS popup with a LabVIEW dialog box.  The LabVIEW dialog box contains an OK button and a loop waiting for an LV notifier.  Simply wait for the notifier of LV (with a timeout of 100 ms) as well as the OK.button.

  Then when you get your external reset to end the test, create an another VI to SET the alert (with data as a Boolean value) system to stop the dialog box.

  Let me know if this can work.  I could put something togther for example, if any.

  Thank you
  PH

• We need a separate servlet class to open a report of jasper for each button in report or not?

  Mr President.

  We need a separate servlet class to open a report of jasper for each button in report or not?

  My code for the servlet is as under which works very well for a single report.

  package ash.view;
  
  
  import ash.model.SchoolAppModuleImpl;
  
  
  import java.io.IOException;
  import java.io.InputStream;
  import java.io.PrintWriter;
  
  
  import java.sql.Connection;
  import java.sql.PreparedStatement;
  import java.sql.SQLException;
  
  
  import java.util.HashMap;
  import java.util.Locale;
  import java.util.Map;
  
  
  import javax.servlet.ServletConfig;
  import javax.servlet.ServletException;
  import javax.servlet.annotation.WebServlet;
  import javax.servlet.http.HttpServlet;
  import javax.servlet.http.HttpServletRequest;
  import javax.servlet.http.HttpServletResponse;
  
  
  import net.sf.jasperreports.engine.JasperCompileManager;
  import net.sf.jasperreports.engine.JasperExportManager;
  import net.sf.jasperreports.engine.JasperFillManager;
  import net.sf.jasperreports.engine.JasperPrint;
  import net.sf.jasperreports.engine.JasperReport;
  import net.sf.jasperreports.engine.design.JasperDesign;
  import net.sf.jasperreports.engine.xml.JRXmlLoader;
  
  
  import oracle.jbo.client.Configuration;
  
  
  @WebServlet(name = "ReportServlet", urlPatterns = { "/reportservlet" })
  public class ReportServlet extends HttpServlet {
      private static final String CONTENT_TYPE = "text/html; charset=UTF-8";
  
  
      public void init(ServletConfig config) throws ServletException {
          super.init(config);
      }
      
      protected Connection getConnection() {
          
          PreparedStatement st = null;
          String amDef = "ash.model.SchoolAppModule";
          String config = "SchoolAppModuleLocal";
          SchoolAppModuleImpl am = (SchoolAppModuleImpl ) Configuration.createRootApplicationModule(amDef, config);
          
          st = am.getDBTransaction().createPreparedStatement("select 1 from dual", 0);
          Connection conn = null;    
      
          try {
              conn = st.getConnection();
              return conn;
          } catch (SQLException e) {
          }   
      
          return null;
      }
  
  
      public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          String var0 = "";
          try {
              var0 = request.getParameter("classId");
          } catch (Exception e) {
              e.printStackTrace();
          }
          response.setContentType(CONTENT_TYPE);
          Map parameters = new HashMap();
                 parameters.put("format", "pdf");
                 parameters.put("WEBDIR", getServletContext().getRealPath("/"));
                 parameters.put("REPORT_LOCALE", new Locale("ar"));
          
          
                 parameters.put("classId", new String(var0));
                 Connection conn = null;
                 InputStream is = null;
                 try
                 {
                   conn = getConnection();
                   is = getServletContext().getResourceAsStream("/WEB-INF/reports/ClassDataReport.jrxml");
          
          
                   response.setContentType("application/pdf");
                   response.addHeader("Content-Disposition", "attachment; filename=ClassDataReport.pdf");
                    
                   JasperDesign jasperDesign = JRXmlLoader.load(is);
                   JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
                   JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport, parameters, conn);                    
                   JasperExportManager.exportReportToPdfStream(jasperPrint, response.getOutputStream());
                            
                   conn.close();
                 }
                 catch (Exception e) {
                   e.printStackTrace();
                 } finally {
                   closeConnection(conn);
                   try {
                       if(is !=null){
                           is.close();
                       }                   
                      
                   } catch (Exception localException1)
                   {
                   }
                 }
          
          PrintWriter out = response.getWriter();
          out.println("<html>");
          out.println("<head><title>ReportServlet</title></head>");
          out.println("<body>");
          out.println("<p>The servlet has received a GET. This is the reply.</p>");
          out.println("</body></html>");
          out.close();
      }
      
      protected static void closeConnection(Connection conn) {
          try {
              if(conn !=null){
                  conn.close();
              }           
          } catch (Exception ex) {
              //  System.out.println("Developer Msg : Exception in printReport1Servlet.closeConnection()");
          }
      }
  }
  

  Concerning

  It will be something like this:

    public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
            String var0 = "";
            String reportName = "";
            try {
                reportName = request.getParameter("reportName");
            } catch (Exception e) {
                e.printStackTrace();
            }
            response.setContentType(CONTENT_TYPE);
            Map parameters = new HashMap();
                   parameters.put("format", "pdf");
                   parameters.put("WEBDIR", getServletContext().getRealPath("/"));
                   parameters.put("REPORT_LOCALE", new Locale("ar"));
  
                   if(reportName.equals("report1"))
                   {
                     var0 = request.getParameter("classId");
                     parameters.put("classId", new String(var0));
                   }
  
                   if(reportName.equals("report2"))
                   {
                     Object value1 = request.getParameter("value1");
                     Object value2= request.getParameter("value2");
                     parameters.put("p1", value1);
                     parameters.put("p2", value2);
                   }
  
                   Connection conn = null;
                   InputStream is = null;
                   try
                   {
                     conn = getConnection();
                     is = getServletContext().getResourceAsStream("/WEB-INF/reports/"+reportName+".jrxml");
  
                     response.setContentType("application/pdf");
                     response.addHeader("Content-Disposition", "attachment; filename="+reportName+".pdf");
  
                     JasperDesign jasperDesign = JRXmlLoader.load(is);
                     JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
                     JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport, parameters, conn);
                     JasperExportManager.exportReportToPdfStream(jasperPrint, response.getOutputStream());
  
                     conn.close();
                   }
                   catch (Exception e) {
                     e.printStackTrace();
                   } finally {
                     closeConnection(conn);
                     try {
                         if(is !=null){
                             is.close();
                         }                   
  
                     } catch (Exception localException1)
                     {
                     }
                   }
  
            PrintWriter out = response.getWriter();
            out.println("");
            out.println("");
            out.println("");
            out.println("
  The servlet has received a GET. This is the reply.
  ");
            out.println("");
            out.close();
        }
  

  And the button that will call the report should be something like this;

• Need to separate the query

  Hi all

  I have the below where all the WITH clause needs to separate query and SELECT article queries must be separated. Any help is very appreciated. Try SUBSTR and INSTR.

  SQL query:

  ######################################################################

  WITH

  test_does1 like)

  Select 'Y' in double

  )

  Select *.

  of test_does1

  UNION ALL

  SELECT 'X' FROM double

  UNION ALL

  SELECT 'A' FROM dual

  UNION ALL

  WITH

  test_does2 like)

  Select 'Y' in double

  )

  Select *.

  of test_does2

  ######################################################################

  OK... Then try the below (LISTAGG will not work in oracle 10g)

  -Separate with clause

  SELECT DBMS_XMLGEN. CONVERT (RTRIM (XMLAGG (XMLELEMENT (E, str |)))) "UNION ALL"). " (Extract ('//Text ()')), 'UNION ALL'), 1) lsval

  FROM (SELECT LEVEL, LTRIM (REPLACE (REGEXP_SUBSTR(str1,'[^,]+',1,LEVEL), CHR (10))) str)

  FROM (SELECT REPLACE (' WITH test_does1 AS))

  (SELECT "Y" FROM dual)

  )

  SELECT * from test_does1

  UNION ALL

  SELECT "X" FROM dual

  UNION ALL

  SELECT "A" dual FROM

  UNION ALL

  WITH test_does2 AS

  (SELECT "Y" FROM dual)

  )

  SELECT * FROM test_does2 ',' UNION ALL ',',') str1

  THE DOUBLE)

  CONNECT BY LEVEL<= length(regexp_replace(str1,="" '[^,]+'))="">

  WHERE the str AS "WITH % ';

  -Select to separate

  SELECT DBMS_XMLGEN. CONVERT (RTRIM (XMLAGG (XMLELEMENT (E, str |)))) "UNION ALL"). " (Extract ('//Text ()')), 'UNION ALL'), 1) lsval

  FROM (SELECT LEVEL, LTRIM (REPLACE (REGEXP_SUBSTR(str1,'[^,]+',1,LEVEL), CHR (10))) str)

  FROM (SELECT REPLACE (' WITH test_does1 AS))

  (SELECT "Y" FROM dual)

  )

  SELECT * from test_does1

  UNION ALL

  SELECT "X" FROM dual

  UNION ALL

  SELECT "A" dual FROM

  UNION ALL

  WITH test_does2 AS

  (SELECT "Y" FROM dual)

  )

  SELECT * FROM test_does2 ',' UNION ALL ',',') str1

  THE DOUBLE)

  CONNECT BY LEVEL<= length(regexp_replace(str1,="" '[^,]+'))="">

  WHERE str AS 'CHOOSE % ';

  -Unit tests

  SQL > SELECT DBMS_XMLGEN. CONVERT (RTRIM (XMLAGG (XMLELEMENT (E, str |)))) "UNION ALL"). " (Extract ('//Text ()')), 'UNION ALL'), 1) lsval

  2 FROM (SELECT LEVEL, LTRIM (REPLACE (REGEXP_SUBSTR(str1,'[^,]+',1,LEVEL), CHR (10))) str)

  3 (SELECT REPLACE (' WITH test_does1 AS))

  4 (SELECT "Y" FROM dual)

  5    )

  6. SELECT * FROM test_does1

  7 UNION ALL

  8 "X" SELECT FROM dual

  9 UNION ALL

  10. SELECT "A" dual FROM

  11 UNION ALL

  12 test_does2 WITH AS

  13 (SELECT "Y" FROM dual)

  14)

  15 SELECT * FROM test_does2 ',' UNION ALL ',',') str1

  16 DOUBLE)

  17 CONNECT BY LEVEL<= length(regexp_replace(str1,="" '[^,]+'))="">

  18. WHERE LIKE str "WITH % ';

  LSVAL

  --------------------------------------------------------------------------------

  WITH test_does1 AS (SELECT FROM dual 'Y') SELECT * FROM test_does1 UNION ALL

  WITH test_does2 AS (SELECT FROM dual 'Y') SELECT * FROM test_does2

  SQL > SELECT DBMS_XMLGEN. CONVERT (RTRIM (XMLAGG (XMLELEMENT (E, str |)))) "UNION ALL"). " (Extract ('//Text ()')), 'UNION ALL'), 1) lsval

  2 FROM (SELECT LEVEL, LTRIM (REPLACE (REGEXP_SUBSTR(str1,'[^,]+',1,LEVEL), CHR (10))) str)

  3 (SELECT REPLACE (' WITH test_does1 AS))

  4 (SELECT "Y" FROM dual)

  5    )

  6. SELECT * FROM test_does1

  7 UNION ALL

  8 "X" SELECT FROM dual

  9 UNION ALL

  10. SELECT "A" dual FROM

  11 UNION ALL

  12 test_does2 WITH AS

  13 (SELECT "Y" FROM dual)

  14)

  15 SELECT * FROM test_does2 ',' UNION ALL ',',') str1

  16 DOUBLE)

  17 CONNECT BY LEVEL<= length(regexp_replace(str1,="" '[^,]+'))="">

  18. WHERE str LIKE "SELECT % ';

  LSVAL

  --------------------------------------------------------------------------------

  SELECT 'X' FROM dual UNION ALL SELECT 'A' double

• Therefore, cancel a separate instance properties sepaete?

  Hello
  
  IM new to oracle rac, we use the oracle 11.2.0.2.0 on AIX 6
  
  We have installed the RAC configuration. I have a doubt,
  
  Therefore, cancel a separate instance properties sepaete?
  
  & why single tablespace temp for all instances. ?
  
  Thank you

  Hi user10745179,

  You have a very genuine question and to be honest, technically Oracle designer were two options

  (1) separate for each Instance undo tablespace
  (2) a big Undo tablespace for all RAC instances

  and they chose option 1. It sound to me that I see after quick right about single tablespace.
  (1) makes sense because it helps to avoid conflicts (I/O for each Exchange Instance goes to different domain) and
  (2) may be locking problems.
  (3) this also avoid fusion of high cache blocks undo (transfer block between the nodes).
  (4) etc.

  Be aware that undo tablespace have few rollback segments in this isn't a single segment. They (Oracle) could always implement these feature with only tablespace but lets not go there.
  Thank you
  Krishan

• BlackBerry Smartphones blackberry curve 9300 manual network selection

  When I updated my curve 9300 manual network selection, and I select my networ, if I go to an underground place or something and I lose the signal, the phone doesn't pick up the signal automatically when I'm back in a coverage area. Instead, I find a warning window that says "cannot find the home network and asked me to choose if I waast to: set it to automatic, go to the settings or cancel" and I have to either go into settings and select again or just the Auto value and it will find. in other smart phones, it gives generally than an alert, but as soon as I'm in a coverage area, it captures the network on its own without having to go into the settings. so is this normal behavior?

  mira_ishak wrote:

  When I updated my curve 9300 manual network selection, and I select my networ, if I go to an underground place or something and I lose the signal, the phone doesn't pick up the signal automatically when I'm back in a coverage area.

  Correct, because you have set the network to HAND selection feature.

• Run a clientListener of type without the (AID) selection selection

  Hey everyboy, today I brought a difficult question and interesting for you. (I use JDeveloper 12.1.2.0.0 and the database given by oracle-> HR)

  Imagine the following scenario:

  -You have a table read-only adf with the service id and the name of the Department

  -You have a table read-only adf with information from all 3 tables (join in the department table, table employee and jobs table), I'll call table HUB

  -You have a table read-only adf with the employee id and the name of the employee

  -You can select one or several departments and the HUB table displays only the rows that are related to the service you have chosen

  -You click on any item in the table of hub and it highlights the rows in the employee table that correspond to lines in the table HUB

  My question is: How can I do the last part (click on the picture of hub) without clicking it?

  I have this on my table of HUB:

  < af:clientListener method = "rowSelected" type = "selection" / >

  < af:serverListener type = "invokeMatcher" method = "#{BeanControloTotal.matchEmFACTS}" / >

  It's the rowSelected method:

  < af:resource type = "javascript" >

  function rowSelected (evt) {}

  var table = evt.getSource ();

  AdfCustomEvent.queue (table, "invokeMatcher", (), true);

  evt. Cancel();

  }

  < / af:resource >

  If I try to move my clientListener and ServerListener, it says that I don't have the attributes that I need for the method in my bean (because I don't have the employeeID).

  I have the bean with links to everytable (so I can access them if I need) and my matchEmFACTS code is:

  {} public void matchEmFACTS (ClientEvent clientEvent)

  matchEmFromJavaScriptEmployee (clientEvent);

  matchEmFromJavaScriptJobs (clientEvent);

  matchEmFromJavaScriptDepartments (clientEvent);

  }

  {} public void matchEmFromJavaScriptEmployee (ClientEvent clientEvent)

  initialize and store the values previously selected

  oldSelCoMap.putAll (selCoMap);

  selCoMap.clear ();

  newSelection.clear ();

  Employee of the chain = "";

  RicheTableau factTable = (RichTable) clientEvent.getComponent ();

  rowkeys selected process

  RowKeySet rowKeySet = (RowKeySet) factTable.getSelectedRowKeys ();

  CollectionModel cm = (CollectionModel) factTable.getValue ();

  .....

  }

  Maybe there is a way I can run this clientListener automatically without having to select any element of my table of hub.

  Any ideas?

  My best regards,

  Frederico.

  I've managed to do this and to do that, I had to change my job so that they don't depend on the clientlister and click action.

  It's a little difficult but doable.

  So thanks for the answers and have a great day.

  Frederico

• Need help with PL/SQL so and then select

  Hello guys, I am new to the PL/SQl programming (only Java experience) and I'm pretty stuck to my task. It would be great if you could help me. I am in programming with Oracle SQL * Plus Version 10.2.0.3.0

  Whenever a user logs on to the server a database entry is created with information about the logged-on user. I need to create a PL/SQL command that selects all the information from last month. Unfortunately, the date_stamp column has a certain weird format: 1131210 for December 10, 2013

  
  

  My idea so far:
  

  
  

  DECLARE

  v_today NUMBER;

  BEGIN

  v_today: = TO_NUMBER (TO_CHAR (SYSDATE, 'MM'));       -Save the number of the month (e.g.12) in v_today

  IF v_today = 01 THEN

  SELECT * from audittrl

  WHERE the date_stamp between 1131201 AND the 1131231;

  ELSIF v_today = 02 THEN

  SELECT * from audittrl

  WHERE the date_stamp between the 1130131 AND 1130101;

  .......

  END IF;

  END;

  /

  Error code: "an INTO clause in this SELECT statement.

  I do not want to save the result to select a variable, hope you can help me. Thanks in advance.

  Hello

  6a4d1bcd-c00e-4dac-AB64-9b6bdb1652d1 wrote:

  Thanks, I'll try that, if still get caught once, I'll be back. Anway I'm not sure of the solution of Chris227, because I can't test it right now. From my point of view it gives you information the current month (e.g., December) and not the month previous (-online November), or have I missed something. ?

  You are right.  In addition, it does not for a given year.  If you have data from several years in the table, it will select lines for the month of December 2012, 2011, 2010,... but also of 2013.

  Here's a way to get around that:

  DECLARE

  prev_month_start PLS_INTEGER: = TO_NUMBER (TO_CHAR (ADD_MONTHS (SYSDATE-1)

  , "YYMM"1' "01"

  )

  );

  this_month_start PLS_INTEGER: = TO_NUMBER (TO_CHAR (SYSDATE

  , "YYMM"1' "01"

  )

  );

  BEGIN
  FOR (IN) rec
  SELECT *.
  Of audittrl
  WHERE the date_stamp > = prev_month_start
  AND date_stamp< >
  ORDER BY user_id, date_stamp - or other

  )
  LOOP
  dbms_output.put_line (rec.date_stamp);
  dbms_output.put_line (rec.event);
  dbms_output.put_line (rec.user_id)
  dbms_output.put_line (rec.host_name);
  END LOOP;
  END;

  This should also be more effective, because it will allow the optimizer to use an index on date_stamp.  Even if there is no index, it will be more effective because it avoids calling any function (for example, SUBSTR) on each line of the table.

  You needn't PL/SQL to get these results.  Just use SQL, you might say:

  SELECT event, host_name, user_id and date_stamp
  Of audittrl
  WHERE the date_stamp > = TO_NUMBER (TO_CHAR (ADD_MONTHS (SYSDATE-1)
  , "YYMM"1' "01"
  )
  )
  AND date_stamp<  to_number="" (="" to_char="" (="" sysdate="" to_number="" (="" to_char="" (="">

  
  , "YYMM"1' "01"
  )
  )

  ORDER BY user_id, date_stamp - or other

  ;

  Your front end will provide column headers and touch the data so that the columns line up.  It can also set the output to a file.  (For example, if your front-end is SQL * Plus, you can use the command of the COIL.)

  I guess date_stamp is a NUMBER.  If it is a string, the solutions above can be simplified a bit.

  This problem (and many other problems) would be so much simpler if date_stamp was a DATE column.  Using numbers or strings to store the date information is simply asking for trouble.

• Illustrator is snapping to the point without the option selected.

  Illustrator is snapping to the point without the option selected. Anyone else noticing this and what is the solution. Yes, I restarted illustrator.

  slange,

  Then, it may be time to see.

  The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must save curent work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• I need help to create profiles of Firefox directly from the command line (script) without having to use the Profile Manager window step by step

  is there a way to provide command line arguments when calling the Profile Manager so that I can perfectly create a profile of an invocation? By the way the profile name and the location of the profile. I need to bypass the user interaction with the Profile Manager window. Thank you.

  http://developer.Mozilla.org/en/docs/Command_Line_Options#User_Profile