Need to set up my D in Raid 0 drive after "Restore BIOS Defaults"

Similar Questions

• Rookie needs help setting up RAID-1

  Location:

  Hardware: HP A6528P (refurbished / new) with onboard RAID 0 and RAID 1 support for controllers. 6 GB DDR2.

  two (2) WD Caviar Black 750 GB HARD drive each (new) plugged into SATA port 0 and port SATA 1

  Software: RAID enabled in the BIOS.

  You press F4, then ctrl + I during the boot, set up RAID-1 (mirror) and restarted

  Restart to CDROM and installed clean Windows 7 Home first (64-bit)

  Question: Open the computer management / disk management and can see the 'simple' drive 0, but the fault tolerance said 'no '!

  Also, right-click on the 'unique' drive, the option ot 'Develop Drive' is grayed out. So I'm not ablr 'fill' set up as

  According to the instructions found on the internet.

  How do you know (I know) if I run a RAID or not? I really lost at this time - it's my first rodeo, so to speak.

  Any help is appreciated. I am a student in networks and hope to eventually replace Win7 with Windows Server 2008.

  Hello

  F5Loar wrote:

  Wow, that's a nice piece of software; I love almot as Linksys Network Magic. Thank you very MUCH for your advice!

  In any case, after the installation of the program from Intel, it shows a RAID array (Volume 0, I think), but still of Disk Management integrated Microsoft shows 'No' in the column of fault tolerance. It seems odd. Maybe another reboot would be useful.

  So bottom line is I feel better, but the contradictory information leaves me skeptical? !! #?

  Yet once again, I appreciate your response.

  Bob

  To use the Storage Manager, you must create the RAID 1 array after you select the two disks in the Storage Manager Assistant tool. You have already done that. Is there a user manual available for the version that you downloaded on the Intel site. Choose the size of block (typically 32 or 64 kb) and create the table.

  Kind regards

  ERICO

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• BlackBerry Smartphones Newbie needs help setting up email

  Hello world

  I've been the proud owner of a "BOLD" for about 48 hours now. This is my first Blackberry, so please bear with me.

  I need to set up my Yahoo email. I remember setting up front, but I deleted it as my allowance for the use of network (3 Australia) showed 2 MB roaming allowance, of which half was used in one day.

  I think that the e-mail message has been implemented via a browser page, but I can't go back to this page. The e-mail setup wizard seems to be to the establishment through BES which I did not. Does anyone know the address of the page?

  I also remember, when I chose the browser (not of Planet 3) I was taken in a BB page that showed several options of setting up various things. There were about 5 or 6 boxes grey listed above the other? Anyone also know the address of the page for this?

  Thanks for any help,

  Paul

  You also see a personal Email Setup on the device icon? If not try going into the Options | Advanced options | The host routing table. In this screen press press the button menu and choose to register now. See if you receive a message from check delivered to your device. Subsequently, reset the unit by removing the battery for 30 seconds. See if you have this icon now after restarting the device. If you still don't you can try setting up the account again on your carrier's Web site BIS to add return e-mail accounts?

  What options do you remember on this Web site? Try to go to mobile.blackberry.com on your browser and see if it's the page.

• I need to set up my computer at home to print from a working remote desktop connection - how to put in place

  I need step by hep instructions on how to install one in my home computer can print remote desktop connection works.  OS 7 Pro work and home OS is Windows 7 home preuiem.  I don't know how to set options in local resources.  I just need to set up my printer driver or printer on the remote computer.

  Thank you

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you want to know how to configure the printer to print from the remote desktop connection.

  I will surely you help with this.
  I suggest that you set these settings before you connect and check if it helps.

  (a) Open Remote Desktop connection by clicking the Start button, clicking all programs , clicking Accessories, and then clicking Remote Desktop connection.
  (b) click on Optionsand then click the local resources tab.
  (c) under local devices and resources, Select the check box Printers .
  (d) click Connect to start the session.

  If the problem persists, I suggest you send the request in TechNet community to improve assistance in this regard. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads
  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• you really need to set up a place to enter bugs.   When you select a page in the Panel of the browser, then select all, the program crashes.   Acrobat CC on el capitan mac.

  you really need to set up a place to enter bugs.   When you select a page in the Panel of the browser, then select all, the program crashes.   Acrobat CC on el capitan mac.

  Hi, Hello, Hello, Hello, bongiorno.

  ==> Feature request/Bug Report Form

  .

• What information do I need to set up a test server

  What information do I need to set up a test server

  After you have installed a local test server, go to the Site > manage sites & set your server to test local, as shown below.  In this example, I use WAMP server and my local site folder resides in the wamp\www folder.  On XAMPP or MAMP, the site folder is htdocs.

  

  Advanced tab

  

  Last screen

  

  Nancy O.

• Need help setting up related content in HCM 9.1 PeopleTools 8.51

  I need help setting up related content in HCM 9.1 PeopleTools 8.51.
  I created a new service id in 'Set Related Content Service'. Its simple, it basically goes to google.com.
  Then I assigned Related Content for the Application Pages on the page «Manage the Configuration content to related» I'm my scenario, I've added it to the careers under the main menu.
  Then I went to the careers page, but the 'related information' link does not appear. How can I get this link to related information to appear at the top of the page/component?
  
  Thank you
  -Cory

  In order to get it work, there are a few basic server configuration requirements that you need in order to make it work.

  (1) define the field of authentication on the Web server
  (2) set the authentication of domain on the web profile
  (3) enable Single Sign-On

  The next in "My Oracle Support" document provides details on configuring content services.

  E-PORTAL: how to set up content related services. [984855.1 ID]

  In addition, here is a link to the PeopleBooks online that deals with the configuration of related content services.

  http://download.Oracle.com/docs/CD/E18083_01/pt851pbr0/Eng/psbooks/tprt/book.htm?file=tprt/htm/tprt20.htm#H3002

  In addition, there are also some know the limitations to the use of related content are different depending on the version of the tools you use.

  I hope this helps.

• Portege M800 - point of exclamation on SCSI RAID Controller driver

  I had installed XP on my Portege M800. And it works properly.
  One thing that bothers me is the exclamation point on the SCSI and RAID controller in the Device Manager tab.
  XP says that no drivers have been installed.

  Need help to sweep the Exclamation marks or what driver should I install?
  Thank you

  RAID SCSI on a laptop? : eek:

  Try the Intel Matrix Storage Manager for the Toshiba Site.

• When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  Sorry Photoshop - problems resolved - I read the details - turns out you need to make changes not files opened for preferences apply to all files.

  Thank you, Al

• Qosmio F30-141 - how to change the RAID to IDA in the BIOS?

  Hello world! I own computer laptop Qosmio F30-141. The problem is that I don't like vassive RAID. Please, could you tell me step by step how to change the RAID to IDA in the BIOS. Thank you in advance.

  Why do you think that this can be changed?
  Maybe you can disable the RAID and be happy without him.

  Have you checked s manuals? It is described how RAID works on Qosmio F30.

• Need help from the Realtek ALC268 for Windows XP driver

  Hi all

  I bought a new laptop an it was Vista installed on it.
  So I installed Windows XP well. But the audio driver does not work.

  I downloaded the Realtek dfferent versions, but no one worked...

  I've got the Realtek ALC 268 with HD Audio chipset. Anyone an idea how to solve the problem, or where I can download a driver that solves the problem?

  THX, FleetAdmiral

  If you use Windows XP, you need to install * KB888111 * and * KB835221 hotfix * before install driver sound!
  This should help!

• I need to restore the default Favorites

  I deleted some of my default bookmark (like manage, recent...) tabs by mistake and the need to get back them. How do I do that?

  https://support.Mozilla.com/en-us/KB/restore+the+default+Smart+Bookmarks+folders

• need an exact model of the PCI communications controller driver

  Mr President.

  my model is G62 B39 SE

  WINDOWS 7

  64-BIT

  HARWARE ID IS

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  Please I need an accurate model of the PCI communications controller driver

  Hello

  It's a system driver wise called "Intel Management Engine Interface (MEI) ' as mentioned in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5040732 & sw_lang =

  Please download the exe on the link above and install on your machine.

  Kind regards.

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox