Similar Questions

• Change the duration of multiple clips "as one" clip together?

  Here's my situation:

  I have a song to 127 BPM. I have a music video (muted) to 125 BPM.

  I spent a long time cut out excerpts of the video channels and muliple clips to form a chronology (but with a lot of clips and channels lined up).

  I now want to change the total length of the video clip to match the TEMPO of the song (which I should have done in the first place), but the video is, as noted earlier, sliced upward in mulitple clips in multiple channels. How do I change the duration of all the clips at the same time, where the end and the beginning of the clips still line up to eachother?

  It would be incredibly easy if there was a function non-breeders. Where can I nest multiple clips, change the duration and the UN - nest clips from clips of an overall duration slices changed. (Which is not possible. Yes, I can drag out of the nested charger clips, but the clips will still have the initial term).

  TL; DR: How can I change duration of multiple clips "as one" clip together?

  Never mind. I found an alternative solution. I used an expandable calculator at http://mp3.deepsound.net/eng/samples_calculs.php and time stretched all the clips to match the TEMPO of the song. Now I just need to break all the clips, which can be done one by one, but I found this trick to snap all clips at once: http://vimeo.com/27428526.

  I'll just let this thread remain open for each other with the same problem can find it

• Move multiple clips

  Hey guys,.

  very basic question here.

  At one point in my calendar, all the following clips have an offset of Frame 2. I don't know how it happened, but I need to go right.

  How can I fix it without touching all of what follows, roughly 120 cuts?

  

  Hey,.

  You can move multiple clips using http://www.ircp-tools.com/

  Go to 'IRCP-beauty '. It is a timeline editor that allows you to touch several clips.

  See www.youtube.com/watch?v=taaHAggzJIc for a short video on this subject.

  I would like to know if it works for you.

  Valentine's day

• Change the saturation, contrast, Equalizer for multiple clips

  Hello

  I've already cut my project.

  Now, all that's left to do is to correct the saturation, contrast + audio equalizer.

  I can't believe the only way to achieve this is by the clip.

  Thank you very much.

  YYou can do multiple clips at once, or you can make one and copy and paste other attributes. It depends on the program, but usually video is rated in sequence by sequence, unless the shot is repeated.

• Trim by dragging multiple clips?

  Is there a way to select multiple clips, then extend/reduce size all together? I tried this with clicking and dragging the end of the clip, but it only extends / retracts the clip alone, I clicked on the spot all the selected items.

  Do not drag. You can extend to change individual items with a shortcut, which is very fast. Or you can define periods of several clips.

• Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  Dear Sir

  Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  I am in a field & I'll migrate with a domain name.

  EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.

  data servers are also migrating with the new domain.

  is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.

  Kind regards

  Chauvet J.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Share multiple photos via share framework

  Hello

  I'm trying to share multiple photos through the framework of the action, but the code below only allows me to create new tasks with them. How can I share multiple photos like the app native photo?

  InvokeRequest invokeRequest;
  invokeRequest.setAction("bb.action.SHARE");
  invokeRequest.setUri("list://");
  invokeRequest.setData(itemPathList.toUtf8());
  invokeRequest.setMimeType("filelist/image");
  invokeManager->invoke(invokeRequest);
  

  One more suggestion...  Try to use bb::cascades:Invocation, which behaves more like the InvokeActionItem (making an independent invoke) that use InvokeRequest directly.

  Here is an example:

  void MyClass::someFunction() {
      . . .
      InvokeQuery *query = InvokeQuery::create()
          .mimeType("filelist/media")
          .uri("list://")
          .data(data);
      Invocation *invocation = Invocation::create(query);
      query->setParent(invocation);
      connect(invocation, SIGNAL(armed()), this, SLOT(onInvocationArmed()));
      connect(invocation, SIGNAL(finished()), invocation, SLOT(deleteLater()));
  }
  
  void MyClass::onInvocationArmed()
  {
      Invocation *invocation = qobject_cast(sender());
      invocation->trigger("bb.action.SHARE");
  }
  

• Share multiple files via e-mail and Invocation vs InvokeManager

  Hello

  Sorry for the long post, in fact I can invoke multiple file sharing using method 2, but I don't know what the problem with method 1. I would like to here your suggestions/advice/explanation in this regard.

  Method 1: I use Invocation to share several files by e-mail by following the guide here:

  https://developer.BlackBerry.com/native/documentation/Cascades/device_platform/invocation/email.html

  However I can't make it work.

  My Page is:

  Page {
      id: mainPage
      attachedObjects: [
          Invocation {
              id: emailShare
              query {
                  invokeTargetId: "sys.pim.uib.email.hybridcomposer"
                  invokeActionId: "bb.action.SHARE"
                  uri: "list://"
                  data: "[{\"uri\": \"/accounts/1000/shared/downloads/test.txt\"},{\"uri\": \"/accounts/1000/shared/downloads/test.txt.1\"}]"
                  mimeType: "filelist/mixed"
              }
  
          }
      ]
  
      Container {
          Button {
              text: "Share"
              onClicked: {
                  emailShare.trigger(emailShare.query.invokeActionId);
              }
          }
      }
  }
  

  When I run the app, it output the error to the console, and then when I click the button nothing happens.

  InvocationWrapper::onQueryFinished: no matching result from Menu Service for query
     mimeType="filelist/mixed"
     uri=QUrl("list://")
     data= "[{"uri": "/accounts/1000/shared/downloads/test.txt"},{"uri": "/accounts/1000/shared/downloads/test.txt.1"}]"
     metadata= QMap()
     perimeter= 0
     action= "bb.action.SHARE"
     target= "sys.pim.uib.email.hybridcomposer"
     invokerIncluded= false
  InvocationPrivate::onQueryResolved: no result matching query, no armed signal sent.
  

  Method 2: If I change to use InvokeManager as shown here:

  http://supportforums.BlackBerry.com/T5/native-development/multiple-attachment-in-email/m-p/2349473#M...

  So it works, the app can call emails to share multiple files.

  Page {
      id: mainPage
      Container {
          Button {
              text: "Share"
              onClicked: {
                  _appUI.share();
              }
          }
      }
  }
  

  void ApplicationUI::share() {
  
      QString fileList = "[{\"uri\": \"/accounts/1000/shared/downloads/test.txt\"},{\"uri\": \"/accounts/1000/shared/downloads/test.txt.1\"}]";    InvokeRequest invokeRequest;    invokeRequest.setTarget("sys.pim.uib.email.hybridcomposer");    invokeRequest.setAction("bb.action.SHARE");    invokeRequest.setUri("list://");    invokeRequest.setData(fileList.toUtf8());    invokeRequest.setMimeType("filelist/mixed");    mInvokeManager->invoke(invokeRequest);}
  

  My questions are:

  1. What is different between the 2 methods?

  2. Why use Invocation gives error with Menu Service & InvocationWrapper? In this case I have to sign something up with the Menu Service to make it work?

  Best regards

  One last thing to try. Can remove you the ID of the target and let all remains unchanged?

  I just remembered that there is a known issue with envelope API call where if you specify the target ID, it does not work.

  Shadid

• How do disable you Lumetri color on multiple clips?

  When I applied LUTs and looks like my images, real-time playback really suffers. Everything works fine when I turn it off, but I don't know how to enable / disable Lumetri for the entire sequence or multiple clips.

  My sequence is huge, so I can't go just off individually, there must be a quicker way. What Miss me?

  Appreciate any help.

  You can cut the adjustment as any other element layer, each segment can have a different effect settings.

• duration of multiple clips frame

  I am sure that in a previous version of first, you can select several clips (when the calendar is configured to display the time in frames) and the info panel shows the duration combined in similar when frames you current select a single element. However in the latest version, when you select multiple clips, it doesn't show in the timecode format than ever.

  How can I display the duration of a selection of several clips in the form of frames?

  Hi Philippe,.

  In the menu file > project settings > general, choose display as a frames Format and then check.

  Vinay

• I have created a PDF file using Adobe DC and I need to share this amongst many pepole. They need to install adobe DC on their pc

  I have created a PDF file using Adobe DC and I need to share this amongst many pepole. Do need to install adobe DC in their pc.

  It depends on.

  1. most people with reasonably new equipment can read PDF files in any case using things that are built in. This includes

  -Windows 8 and later versions

  -Mac OS (all users)

  -iOS (iPhone, iPad)

  -Android (phones and tablets)

  2. many people Windows have a web browser that can read PDF files anyway. This includes

  -Chrome

  -FireFox

  3. This means there are many different types of software that can read PDF files. If you do a simple PDF, you should be fine. If you make shapes or portfolios or media, your end users must install Acrobat Reader, even if they otherwise can read a PDF file.

• Application of effects master to multiple clips

  Adobe Premiere Pro help. Master Clip effects we are told:

  • To apply an effect to multiple master clips, select the items in the project Panel, and then drag the effect to apply to the selected items.
  • Adjust the effect parameters using the effect controls Panel.
    

  But only the first stage works. I select them in the project Panel, and then drag the Lumetri color effect to one of the clips. it applies to all of the clips as a master effect . Nothing changes, because I have not yet defined all the parameters of the effect. Now, I go to settings in the color Lumetri effect controls panel and change the settings, for example by selecting a LUT entry. The LUT applies only to the element in the Source window . I want to emphasize: focus is not in the Source window, it's always on the project, with the same clips still selected Panel.

  1. is it me, or is this insane behavior?

  2. How can I apply a master effect to multiple clips? Is the only way first create a preset? Copy and paste the attributes of an effect may not be possible on the main elements.

  Thanks for your suggestions.

  You can only set one effect at a time.  So yes, add the effect to a clip, creating a preset and then apply to all the rest.

• Is there a better way to rename multiple clips on ingest?

  I am new to the prelude and the journal entry and transfer in FCP7.

  I want to be able to put / output and the name of all my clips individually, each with a unique name, for example: WS_tilt_man walks down the street. With that name appear in my BONES is essential when it comes to my clips to archive and reuse of shots in several projects. I tried the function "Rename the file", but it is quite slow because I have to re - open the window of acquisition after each clip is ingested. It's laborious, when I have clips 50 or more that I want to log/transfer.

  Is there a better way to rename multiple clips on ingest?

  Hi Caleb,

  You can rename all of the files at the time of ingestion of only.

  Select Rename and add a preset. Also check the transfer of Clips to Destination and select any main destination path where all the clips with their new names/rename would be transferred.

  Check the following picture. I hope it helps.

  

  Thanks for mentioning if there is no confusion.

  Thank you

  MILIN

• Look for multiple clips at once

  Hey there,

  
  So, I would like to get this right. If I use the direct link from first to Speedgrade, there is no way to easily apply a glance to multiple clips other than the use of adjustment layers?
  I have pictures of different places all over my calendar, it would be a pain to create layers of adjustment for all the clips.
  Back when I was using apple color, I just select them and drag a look at the selection and the bam, done.
  Is it really not possible with Speedgrade?

  In short, no... you can not select multiple clips in Sg to the class at the same time or drop a glance on. There are ways to copy grades but they are all by the clip, with the exception of using adjustment layers. And Yes, the creation of adjustment on a bunch of clips spread layers is a royal pain. Feel free to fill a feature request of the possibility to select several clips... and discontiguous multiple clips... for the ranking in some sort of batch.

  /Feature bug report form requires Adobe...

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  I would like no end if it appeared within the programs.

  Currently, the two ways to do what you want is as above dummergold... Place the head on the clip you want to change, rest the mouse over the clip you want to copy from and click on 'C', or use the keypad 1-9 for copy/paste a grade.

  The other takes a little more ' splaining. The default guess of origin before the current clip (with head of reading about it). Count however many clips to the left that you want to use for your settings (up to 9) and using the keypad, click this number. So... If it's just the previous clip, you would click on the 1 on the numeric keypad. ALL the current standings will be replaced by what is on the clip you selected by entering your number and once again 1-9 clips before your currently selected clip.

  To reverse the process and choose a quality according to the item currently selected, you hold ALT first and then click on the sign '+' keypad to reverse the "default"... and then any number from 1 to 9, you hit on the pad will capture the rank of this clip, 1-9 after the currently displayed item, and drop this clip to replace all the existing settings. In order to work immediately after this clip for the shade desired put the playback head on a clip, hit the number 1-9...

  Back to grabbing the clip settings to before the item that is currently displayed, it's... ALT and the minus sign ' - '. Here again, the settings from that much before clips the clip ongoing hit 1a9 seizes.

  Once you get used to it, you can move along at a decent pace. Like you, I prefer to be able to skip the long however.

  Neil

• I want to get multiple clips horizontally through the frame, how can I control the speed at which the move?

  I want to get multiple clips horizontally through the frame, how can I control the speed at which the move?

  And the second