need to understand the administration of the database on the local computer at home

Similar Questions

• Need to understand the basics of Oracle RAC and grid technology, for training

  I need to understand the infrastructure Oracle RAC and grid, a manager / training perspective.

  I see links here and here , so a few questions:

  -What is the fundamental difference from the layman's point of view (for example, a Manager)?

  -What training options are available for a generic 11g DBA to learn this new technology? I've seen this course from a partner of Oracle ("" courses: Oracle 11 g: RAC and Grid Infrastructure Administration accelerated Release 2 ""), to a boat load of money, during 5 days I think. So we are looking for something a bit more reasonable (and accessible), for example, books, online, etc.

  WM Peck 1958 wrote:

  I need to understand the infrastructure Oracle RAC and grid, a manager / training perspective.

  I see the links here and here, so a few questions:

  -What is the fundamental difference from the layman's point of view (for example, a Manager)?

  -What training options are available for a generic 11g DBA to learn this new technology? I've seen this course from a partner of Oracle ("" courses: Oracle 11 g: RAC and Grid Infrastructure Administration accelerated Release 2 ""), to a boat load of money, during 5 days I think. So we are looking for something a bit more reasonable (and accessible), for example, books, online, etc.

  For a very basic definition, ACR is technology that is used by the database and IM is the infrastructure that makes the CAR work. In a response to the forum, this is probably all that can be said about the two. For a very long answer, you should read the links you cited.

  # 2, the course you are looking at is called accelerated because it combines two courses in one week training-RAC (4) and GI (3). So it's a day 7 curriculum that we would do in a 5 day course and who must justify its cost. But let me say, it's a really very good. But on the other side, it can be pretty intimidating to someone who does not already know these technologies. So I suggest that you send your team to each course individually and no doubt after doing some research. They can start to read the following books

  Pro Oracle Database 11g RAC on Linux

  https://www.mheducation.co.in/HTML/9781259004063.html

  And this link to doc,

  Online Oracle Database Documentation 11g Release 2 (11.2)

  Aman...

• I need to copy the towel on my home network from my Office Windows 7 on my Windows 7 laptop.

  I need to copy the towel on my home network from my Office Windows 7 on my Windows 7 laptop.  I have no idea. Could someone help?  Thank you.

  For some reason any, that I can't understand, I can't see the files of each computer through the network.  Any computer, I click on I see the desktop computer files and not the laptop files.  I decided to use the Briefcase with a USB stick rather than make me crazy.

• Copy the packages to the database on the local computer

  Hi all
  
  Y at - it Anyway to copy all the packages in the oracle database on the local computer? I have a lot of packages I need to take a backup every time, but I don't want to spend a lot of time to open each package and save on my computer.
  
  Please advice.
  
  Thank you
  
  KK

  allround automations product?

  There is an export of the objects option in the Tools menu.

• Windows Anytime Upgrade, you may need to change the locale

  I'm trying to upgrade Windows 7 Home Premium to Windows 7 Professional.

  I type "Windows Anytime Upgrade" in the search field and go to the Express upgrade window.  I click "go online to choose the best product...". "and then it shows a window saying that I"might need to change the locale.  The computer is in the United States, whose English is the default location.  It will not progress beyond this screen.

  Windows Anytime Upgrade is no longer functional as it is a product of the retail, Microsoft sells more retail licenses.

  Your best option is to an Express Upgrade card for any inventory or Professional upgrade Windows 7 use the retail purchase with Anytime Upgrade from Windows 7 Home Premium product key.

  Where can I still get Windows 7?

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Windows could not start the windows on the Local computer firewall

  Original title: I don't have the first response says.then the following error code came.
  Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

  Hello

  Thanks for posting the request in the Microsoft community forums.
  The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

  1. what anti-virus software is installed on the computer?
  2. do you have a third party security/firewall on the computer?

  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

  Try the troubleshooting suggestions provided to start the Windows Firewall.

  Method 1:

  Run the fix it from the link to the problems of the Windows Firewall Service and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:
  You can check the service for the Service of Windows Firewall if it is started or not.

  a. Click Start.

  b. in the start search box, type Services.

  c. click right on - run as admin.

  Check if the below mentioned services has mentioned State and type start.

  Firewall Windows started Automatic\Manual.

  base filtering engine Automatic\Manual has begun.

  driver authorization Windows Firewall started Automatic\Manual.

  Also check the dependency services that are required for the execution of the Service Windows Firewall.

  Method 3:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  If the problem persists then, try the steps from the link.
  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.

• "windows has no start windows on the local computer search... code error 2147218141".

  I had to fix it several times and now does not yet: "windows does not have start windows on the local computer search... code error 2147218141".» I ran sfc/scannow, not received any error.

  Microsoft FixIt couldn't help.

  How can I do this time?

  I tried method 2, but things have just gotten worse.

  I see now 3 new errors:
  1: TL - bootstrap.exe has encountered a problem. I believe that it's associated with my smartphone.
  2: exception processing message c0000013 parameters 75b65f7c 75b65f7c 4 75b65f7c
  3: DrWatson Postmortem Debugger has encountered a problem and needs to close.

  Ugh!

  ------------------------------------------------------------------------------------------------------------------------
  Looks like I found a solution. I found that I still had
  WindowsSearch-KB940157-XP - x 86 - enu.exe in my file of download of one of the (now how many) times past, I had to solve this problem. I did a re-install and it seems that the Outlook and the Office up and running again.

  Phew!

• I get the error code that microsoft.jet.oledb.4.0 provider is not registered on the local computer

  I get the error code that microsoft.jet.oledb.4.0 provider is not registered on the local computer

  I have the 64 bit vista edition and can't find a way to get this program to run. Can someone help me please. I need this program for school

  http://social.msdn.Microsoft.com/forums/en/SQLDataAccess/thread/ded16d08-b98c-4130-a6af-d3df4061494c

  Read the information on the link above; and the link to the answer.

  See you soon. Mick Murphy - Microsoft partner

• Windows search Windows failed to start the service on the Local computer

  OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

  I'm on Windows 7 Professional 64 bit
  UAC is set to the lowest level 2

  The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

  Windows cannot find ': search query = cmd'
  
  I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

  Windows search Windows failed to start the service on the Local computer
  Error 161: the specified path is not valid

  The event log showed me this Application error:

  Cannot initialize the Gatherer service.

  Details:

  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
  

  Help!

  Thanks Samhrutha.
  Your proposed solution of editing the registry is the only solution I found to this day and still work.
  The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

  I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

  Only recently, however, discovered one other cause possible/fix to this problem.
  Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

  To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

  After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

  Hope this helps!

  :)

  ~ rx

• Error message: the 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local computer.

  Hello

  I've successfully installed the NCLEX - RN 4000 on Microsoft Windows 7 Home Premium edition. However, I get the error message "the"Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer"whenever I try to open the program.» The package says that the software is compatible with versions of Microsoft Windows Vista and XP. I tried to open the program using program compatibility issues resolution which did not work. I also do a right-click on the icon and choose Properties/compatibility and then selected the most recent Microsoft Windows OS program is compatible with and apply the settings. To my dismay, it was also a no go. I did some research and reading that Microsoft Windows 7 Home Premium 64-bit is not compatible with the programs .msi. So, I checked and found out that the file ends by .msi.

  With all that said, these are the questions that I find myself with:

  What can I do to fix this so that I can use my 4000 NCLEX-RN program?

  Why Microsoft Windows 7 is not backward compatible?

  Any help with this problem would be greatly appreciated!

  Thank you very much!

  UPDATED: Wednesday, April 21, 2010

  If someone else has the same problem when you try to run the NCLEX-RN 4000 program on the Windows 7 operating system, you will need to contact Wolters Kluwer Health (the manufacturer of the NCLEX-RN 4000 Review program). The customer service number is 1-800-638-3030. Once you reach a customer service representative explain why you call and they will send you by e-mail an update that will allow the NCLEX-RN 4000 to run on the Windows 7 operating system. Please do not hesitate to ask if you have any questions! And thanks to all who have responded to this topic! I enjoyed all your comments!

• Windows could not start the Microsoft Office Service on the local computer

  The whole error is

  "Windows could not start the Microsoft Office Service on the local computer error 1053; Service has failed to demand launch or timely control.
  It seems that this instance of office 2013 has stopped working.
  Win7 64 bit machine with all sorts service packs, etc. was in a field, we moved to a new domain, and it worked well for one day, now it has this problem. Any advice or suggestions would be helpful.

  Hello

  Since you are faced with the question after changing to the new domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Forums TechNet Windows 7

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• How can I choose the local computer lan ip in forms6i?

  How can I choose the local computer lan ip in forms6i?

  This:
  Re: identifier must be declared.

  is a complete solution. It only will be not all then more detailed which. Surely you know how to create a stored procedure not you? Connect to SQL * more to your database and paste the displayed code from Paul. Then call this procedure of forms.

  see you soon

• 'MSDAORA' provider is not registered on the local computer

  Hello
  
  I have an asp.net application that connects to a database of oracle with an oledbconnection
  
  Dim m As New OleDb.OleDbConnection ("Data Source =...; Persist Security Info = True; User ID =...; Password =...; Unicode = True; Provider = MSDAORA")
  
  I developed with visual studio on a 32-bit windows xp and when I debug my app everything works fine.
  
  Now I've moved my application on a 64-bit windows server 2008 and version implementation of my application with iis 7.0
  
  
  Now the problem is, every time I start the application in my browser, I get the following error:
  
  System.InvalidOperationException: The 'MSDAORA' provider is not registered on the local computer
  
  Connecting to oracle may not be the fault. I can connect to oracle with sqlplus.
  
  What is the error? What I am doing wrong?
  
  Thanks for the help
  
  Concerning
  
  Edited by: user8846585 the 29.01.2010 03:30

  MSDAORA is not a 64-bit version. You will have to either switch to 32-bit application and use of Oracle 32-bit client, or use a client provider and oledb 64-bit instead (IE, provider of Oracle - ORAOLEDB. ORACLE)

  It will be useful,
  Greg

• Global variables are accessible from the local computer

  While he was trying to use RT project, I can deploy the file to the RT target and communicate with the host using a shared variable.

  But the host VI file returns an error stating that the shared in the pattern-block VI host variable is illegal.

  (RT.lvib\Link reqd\ 'shared variable' node is illegal)

  It also gives a description mentioning that global variables are accessible only to local machines.

  What is the cure?

  Hi Shan21,

  I think your problem with communication between the aim of RT and the host PC might be caused by how your deployment of your variables. Please take a look at the following and let me know what you think,

  Kind regards

  ******************************************************************************************************************************************

  When you make the executable of a project using shared variables, you must have a local copy of the variables on the deployment computer that are then linked to the 'real' shared variables stored on the target - cRIO, in this case.

  This means that the display of your project should look like this:

  

  Note: Two libraries, which can have variables with the same name because they aren't both on the local computer.

  The steps required are:

  1. create variables shared in the normal Manor on the cRIO:

  

  a. right click on the target
  b. new > Variable
  c. properties of the variables enter the name (stop); Data type (Boolean) and the Variable type (always in network-published).

  2. create variables shared on the host PC:
  a. follow the steps 1 a - c
  b. right click on the box to enable anti-aliasing

  

  c. linking to the URL of the PSP, click on Browse - and select variable on the target:

  

  d. click Ok.

  Note: Remember also to deploy the shared manually variable llb. See the related links for more information.

  It's from a base of knowledge to write soon.

  Note:3UCBHM8T knowledge base: how to deploy network Variables shared a compiled executable