Need to understand what this command is

Similar Questions

• Help me understand what this experimental analysis trying to tell me

  

  We have several tables, some SATA and some SAS. SAS one look fine when using this tool but the SATA (above) we always say that the picture is up. This could be a problem, except that the OPS are / s reading and writing to climb several times higher than the level where it first shows 100% usage. Similarly the OPS are / s estimated max is well below the level of the IOPS / real s on many occasions.

  I understand that it is generated by an algorithm to be used as a guide and so not perfect but in the case of this picture, it is not even close. It's never.

  (A) I read wrong or b) some profile for the algo to sata array is not correct.

  Anyone can shed some light on this?

  Thank you

  Delay of the acknowledgement of receipt must be disabled on the ESX servers.

  The KB explains how.

  KB.VMware.com/.../Search.do

  Also turning off LRO can also improve performance.

  In VMware, the following command queries the current value of LRO.

  # esxcfg - advcfg - g/Net/TcpipDefLROEnabled

  To set to zero (disabled) LRO value:

  # esxcfg - advcfg - s 0/Net/TcpipDefLROEnabled

  NOTE: a server restart is required.

  Info on LRO change in the feedback network.

  docwiki.cisco.com/.../Disable_LRO

  ESXI v5.0 should also have passes the connection timeout to 60 seconds.  (default is 5).  However, it must be version 514841 or higher.

  See KB 2007680 VMware kb.vmware.com/.../2007680

  If you do not run MEM, which requires a business license or business +, then make sure that data warehouses are set to Round Robin and the IOs through pass 1000-3.

  This thread earlier has more on these.

  en.Community.Dell.com/.../20008239.aspx

  Kind regards

• How can I understand what this feature in robohelp html 10

  How can I create what's this feature in robohelp html 10 project.

  Try to use the tool Help What's this composer in the Tools tab, if you use the HR for the Word application. If you use the HR HTML, depends on your type of output.

• I used the function where Firefox would automatically remember my password for a site. But now I forgot what this password and I need to understand this. How can I do this?

  I need to know what the actual password is for a site that I log on regularly.

  See

  • https://support.Mozilla.com/en-us/KB/make-Firefox-remember-usernames-and-passwords#w_viewing-and-deleting-passwords

• Someone help me please understand what is this block? -Call Subvi

  Hi all
  During playback of a sample project a block stopped me. I could not understand what it is... once I click it (offline), it opens a Subvi, while runing the labview, it is clear that he will automatically call the Subvi. My Info is the one to call a Subvi VI main, you must use a static reference of Vi. Can someone help me understand what about this block?
  I am attaching the picture of her and a container VI she also well... Simply open the block diagram of the file: "Caller.vi"... The Subvi associated with this block is fixed as well: "Config.."

  I would like to know what is this block name, how it is related to the Subvi and how the Labview call it automatically. .. I really appriciate any suggestions.

  Thanks in advance

  Concerning

  
  

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• This product key for Vista Ultimate is for 2 users; the computer tells me that it is already in use, and it is the second computer. Then I don't understand what the problem is.

  product activation key

  This product key for Vista Ultimate is for 2 users; the computer tells me that it is already in use, and it is the second computer. Then I don't understand what the problem is.

  There is no such thing as a ' 2 License User"for Windows.

  It * may * be for 2 processors. These 2 processors MUST be on the same physical motherboard.

  You use WIndows out-of-contract of license and will have to purchase a new license to the second machine.

• Only need to print a small section of a page? Use this command!

  So, you need to print an image and text below, but you don't want to waste the ink for the entire page?

  Use the command: command + shift + 4

  
  This command will allow you to make a selection on a page to print. It will then export an image on your desktop of the selection.
  

   

  Here's a great video on how it works.
  

   

  I hope this helps some users out there who often need to select parts of a document to print, such as images and information on a web page.

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• I can not install Lightroom 6 on my laptop using 8.1 to WIN.  The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart.  This prevents the work online help.  What can I do?

  I can not install Lightroom 6 on my laptop using 8.1 to WIN.  The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart.  This prevents the work online help.  What can I do?

  Settle in the right forum.

• whenever I open the installer from Adobe, it always say that "trying to connect to the server...". ». Please help me. I don't know what is happening, but my WI - Fi works very well. Adobe needs to know that this facility is very important for me

  whenever I open the installer from Adobe, it always say that "trying to connect to the server...". ». Please help me. I don't know what is happening, but my WI - Fi works very well. Adobe needs to know that this facility is very important for me!

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

• No idea what this area of research and how to eliminate it?

  When I do a search using Google search, a tan window appears above the search results and in the text window and search options/tools.
  How to eliminate it from appearing in my browser search result, when you use Google search?

  The links within this tan window redirect me to sites such as:
  http://www.ideasgames.com/search/?q=search & Submit.x = 1238 & Submit.y =-68
  or
  Google - co.com

  Source code for the above link:

  < title > connection... < /title >
  < content meta = text/html"; charset = utf-8 "http-equiv ="Content-Type">"
  < script language = "Javascript" type = "text/javascript" >
  function zzzz() {}
  document. CCBC. Submit();
  }
  < /script >

  < do action = "" / adv/go / ' method = 'get' name = "cccc" > "

  < / make >

  check in SafeMode fireefox

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

• What this block diagram?

  What this block diagram?

  Match a VI Modbus Library. But I have because if the block is configured to write multiple coils in the coils because reading is set to 1?

  All this work?

  Sorry if the question is a beginner.

  

  In this block diagram, 'Coils Read' and 'Write multiple coils' are enumerated values (or possibly ringtones of appeal, which is not serious for the purpose of this explanation). Enumerations assign names to numbers, to make them easier to read. The coils Read command is set to 1, the command to write multiple coils has a value of 15. You don't need to worry about this number, however, because the enumeration takes care of it for you.

  The constant cluster containing coils of reading is there just to provide the correct data type (a cluster with the right items). Almost all the elements of the latter shall be replaced by the values of wired in the Bundle to node Name. For example, the value of reading coils is there as a placeholder for any function Code. the actual Code of the function is defined by plugging write multiple coils in Bundle by name.

• Is - this command D2CurveSpecOffs working for a graphic bar in DIAdem 11.0?

  Hello

  I have a difficulty to get the command D2CurveSpecOffs works for my custom vertical bar graph (histogram).  I'm opening and closing of the objectnames very well, since I can adjust other aspects of the graph.  As I understand it, D2CurveSpecOffs allows me to compensate for the vertical bar on the left to the right relative to the value it represents on the x-axis?  Right now, it seems that the bar is centered on the value of x.  But because each bar in my bar chart represents a different range, i.e. of the counts of 0.25 to 0.5 = 1000, I would that the right edge of the bar to align with 0.5 (0.5 aligns with 1000 as the x-axis channels & y axis), to my knowledge, maybe I should put the D2CurveSpecOffs = 100 or - 100, etc..

  Example of 2 channels:

  (Ch1) Counts, values (Ch2)

  0.25, 1200

  0.5, 1000

  1, 125

  2: 13

  etc.

  Maybe I'm not completely understand what D2CurveSpecOffs allows me to do.  I'd appreciate your comments.

  -GvG

  GvG,

  D2CurveSpecOffs does not allow to specify the offset of percentage on the x-axis for bar charts. You can see the photos, I enclose below before and after. I would recommend that you change the offset manually in the report and then with the parameters of the curves window, press Ctrl + A, this will copy your settings, and you can then go into your script file and press Ctrl + V to paste the settings changed by your name of graph and the curve already filled. It seems that the value that you specify with Offset is used in conjunction with the bar width to calculate its final position, so, even if you leave the shift even change the width, your bars will move.

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.