Negative values showing with parentheses
Hi allWith the help of JDEVADF_11.1.1.5.0
I view the results on the user interface based on calculations, if calculated value is in the negative list on UI with parentheses like (400 dollars), but I want show - $ 400. I don't know what could be the problem, here I use type = currency to af:convertNumber.
Thanks in advance.
Kind regards
Dinesh
If the locale is US - it would make the show negative number with bracket. You must use a different locale, where the currency format doesn't use parenthesis.
Tags: Java
Similar Questions
-
Negative records show in parentheses)
Hello
I want to show negative values in parentheses)
then use the syntax below
It works fine, but the field type is normal text, I want to display values with 3 decimal places.<?if: UNITSCONFIRMED < 0?> <?concat('(',-1*UNITSCONFIRMED,')')?><?end if?> <?if: UNITSCONFIRMED > 0?> <?UNITSCONFIRMED?><?end if?>
For example, if the units confirmed the value is 20000 then it should be displayed as 20000.000
How to achieve this goal, please help me to do.
Thank you
MohanChoose the type of form in the 'Number' form field and provide the format "#, # 0.000;(#,##0.000) ' have just your xml element in the form field.
-
Replace negative values in multiple channels with "0'.
Hello
I'm calculating and then by creating a cumulative channel, multiple channels. Negative values in these channels aren't necessary, and I need a nice way to replace each negative value in these channels with a value of '0'.
My current code is:
Do
Do
If Data.Root.ChannelGroups (2). Channels (i). Values (II)< 0="" then="" data.root.channelgroups(2).channels(i).values(ii)="0 ">
II = ii + 1
Loop until the second > Data.Root.ChannelGroups (2). Channels (i). Properties ("length"). Value
II = 1
i = i + 1
Loop until I > Data.Root.ChannelGroups (2). Channels.CountIt works, but I don't like. He adds a few seconds when running my script, which was almost instantly. Is there a better way to do it?
Thank you.
Hello Kevin,
The fastest way to go through a channel and check the values less than or equal to 0 is through the canal's calculator. The code below takes all the channel first channel group (with the exception of the first string that is be the weather channel in my example data set) and replaces the values<0 with="" 0="" through="" the="" iif="">0>
Set Group = Data.Root.ChannelGroups (1)
iMax = Group.Channels.Count
FOR i = 2 to iMax
Adjust the strings = Group.Channels (i)
Formula = "= IIF (y '.<0, 0,="">0,>
Call to calculate (formula, Array("y"), Array (Channel))
NEXT ' IIn this example we overwrite the existing values of data channel with 0, but you can also copy the channels to make sure that your raw data is available.
The calculator of channel is extremely fast for this type of operation because it does not create a loop to go if each line separately and check the values he...
I hope this is useful,
Otmar
-
negative value with sign minus
Hello
I have requirment if table.column has a negative value, then it should display - first else no sign
For example, 500 points should be '0000000500', but - 500 points should be '-000000500'.»
Thank you
SandySQL> select case when to_char(a.point,'0999999999') < 0 then 2 trim(to_char(a.point,'099999999')) 3 else 4 trim(to_char(a.point,'0999999999')) 5 end point 6 from (select 500 point from dual union all 7 select -500 point from dual union all 8 select 100 point from dual union all 9 select 200 point from dual union all 10 select -100 point from dual) a; POINT ----------- 0000000500 -000000500 0000000100 0000000200 -000000100 SQL>
-
Tension running from negative to positive to a negative value again using a structure case
Hello
I a VI that takes place (not shown) DAQ hardware and want to do the following with it:
By feeding the starting value (the maximum negative value of voltage), increase (positive) and the end value (maximum positive) voltage for the DAQ hardware TRADERS (should be
shown in the digital display) should go to gradually change from negative to positive maxima and do the reverse process of return to the starting value
which is the maximum negative value.
for example
If I put - 3V to the starting value, 0.5 as increment, + 3 V to the end value, I should get the following:
-3, -2,5, 2,...,.0,..., 2.5, 3 and then 2.5, 2..., 0,...,-2, 2.5-3, then stops.
I managed to get the first which is negative to positive Maxima but he never do otherwise. Can anyone help with this.
Thank you very much
Alain
Study the attached example. Instead of having just a graph showing each DC voltage at each iteration, I made a graph that will update to show all the steps as they occur. The waveform that is the scale of things is to properly size the chart so you can see each stage without having the graph resize with each iteration of the loop. You can pass values to your DAQ hardware to get the real exit.
I used a second shift for such direction suggested by Altenbach register. It is to go to the best (maybe the only way).
-
remove the negative values in table
I have a table 1 d of data depending on the positive and negative values. I'm trying to search for negative values and remove them from the table. This corresponds to the data in the column in the second table 2D that should also be deleted. A minor problem is that there are an additional column in the 2D array that must be skipped. I have the code that should do it. The problem is that if I have two negative numbers in a row the code doesn't thow on the other.
This first picture is the answer I get when alternate positive and negative values. It shows the correct answer.
When I change the first1 of the positive a-1 value as shown below...
... I get the following response.
FYI, some other things such as conversion are here because I'm trying to manipulate the actual data set is enormous. I test everything I do with the numbers that I can actually follow before I apply in my real program. That's why I do extra things.
Thanks for the help!
Here is the solution, that increase the index when you do not remove an element. In addition, whether you use the "less then or equal" when you use the "lower to."
-
10g BEEP format-number for negative values does not
Hi all
I tried the following methods to get the negative number locked up with symbols ().
1 update the mask of BI Publisher properties of field format to
"#, # 0.00;(#,##0.00).
2 tried the Oracle formatting options
<? format - number:A.INVOICE_AMOUNT; "PT999G999G999G999G999G999G999D00? >
What gives me the result as below,
Output value
23.45 23.45 - print correctly
-12.90 (12.90 - closing paren "")' does not print
Please help me get the parenthesis when generating the PDF file.
Thank you
I had the question.
This is the format that was used in your model
###,###,###,###,###,###,###,##0.00;(#)
The first half before; does the mask so no problem.
But after; which is for negative values and that is not the correct format.
Please use this format on the properties of form field that gives you good number format
#, ##0.00;(#,##0.00)
-
TLF - main negative values TextFormat text
TLF does not support negative values for 'leader' (like classical text)?
Copy the following code:
var tf: TextFormat = new TextFormat();
TF. Leading = - 50;
myText.setTextFormat (tf);
works very well in "Classic text" but not of TLF.
TRACE is the same in both cases (Classic, TLF) result operating system:
trace (myText.getTextFormat (.leading)); // -50
But actually LESS the VALUES have no effect, and it's exactly the same when spacing is 0.
Any solution for this please?
Thank you very much.
(Actual design when I apply different amounts of foreground based on a function of the horizontal line of the BOTTOM part)
Moreover, I also checked the same thing with 'Arial' & 'Tahoma', is not a unicode question (Asian fonts).
After much playing with the code, I could solve it with a funny code!
When I put leading to a number, it fails to show the GOOD LINE SPACING:
TF. Leading = - 50; or ZERO or ANY OTHER NUMBER.
When I just didn't attack (!) value or the value 'null' (as it is by default), then line spacing becomes as it should!
TF. Leading = null;
Hope this might help others
-
'Variance PtByPt.vi' generates values of negative values for some input
With certain sequences of input values the Gap PtByPt.vi can generate negative values. It is because of the precision in calculations.
Because it is very common to calculate the gap by taking the square root of the variance, this behavior can take you by surprise because the result will be Nan and not almost 0 you expect. According to the data, this may be frequent or very frequent. In general, a nuisance to debug.
The remedy is simple: take the Abs() before the square root value. A vi that demonstrates the case is attached.
I would suggest to include this correction (or similar) in the "Variance PtByPt.vi' because it gives rise to unexpected and hard to find errors.
By definition - variance cannot be negative.
CAR 446514 discussed in this thread has been corrected in LabVIEW 2014. For a more complete list of bugs fixed in LabVIEW 2014, see 2014 LabVIEW bugfixes. You can download a copy of LabVIEW 2014 evaluation at http://www.ni.com/trylabview/ or if you have a previous version of LabVIEW installed and an active subscription to SSP, you will be able to download the latest version of LabVIEW through NI Update Service.
Kind regards
Jeff Peacock
Product Support Engineer | LabVIEW R & D | National Instruments | Certified LabVIEW Architect
-
Cannot write negative values on server modbus on cRIO 9068
Hello everyone,
I'm moving a project from a platform of 9114 cRIO a cRIO9068, the reason for a difference of heavy in terms of power CPU, memory, performance FPGA etc...
Real time I deploy a modbus TCP server, and I publish just I16 data.
The problem comes when the program tries to write a negative value to a binded on modbus variable. This variable is in the same format (I16), the program could write negative values, between 0 and -32768, but whenever the modbus force set to zero.
I tested the modbus also with the 'system of distributed OR 2014 Manager' but always impossible to write negative values on I16, but I can if I consider the data as I32!
(see files)
Furthermore, I deployed a modbus server on my PC and in this case, everything is fine.
More information:
I work with labView 14.0f1.
The cRIO are installed 'Labview RealTIme 14.0.0' and 'server Modbus I/O 14.0.0.
I tested the feature on three different cRIO 9068 with the same result.
I think it's something wrong with cRIO 9068, can anyone help me?
Thank you
MZ
Hi, Marcello,.
I was able to reproduce the problem cRIO 9068 and it look like a CAR (corrective action request). I've opened a request for Corrective Action (AUTO ID 511039) to report the issue OR R & D.
Have you tried to implement MODBUS slave on ana MODBUS master PC on cRIO? I tried and it works even with I16 data types.
I hope this will help you.
Kind regards.
Claudio Cupini
OR ITALY
Technical support
-
Replace negative values of table 2d
Hi all
I have a large dataset I want for post processing... My data are in the form of a 2D array of typically 1e5 + lines by 100 + models! I want to replace all the negative values in the table with zeros.
My initial was however to use two indexed for loops with a structure of matter inside looking for > 0 condition. However, this way I'm practically rebuild the table from scratch and it takes forever (had to give up after about 5 minutes of Calc, while I was still less than 10% of fact). I've attached a snapshot of my sample vi for your review.
Is there a more efficient and faster way to do this?
Thanks a lot for your time,.
Harry
There are many ways to do this, but in your case I would just wire table 2D to a primitive range and Coerce (from the palette of comparison) with the range of 0 to + infinity.
-
I use LR 6/CC 2015.
Whenever I type in a negative fashion develop it is reset to zero after entry or tab.
I type in positive values remain and are not reset to zero.
In older versions of Lightroom, I had no such problems.
I have an iMac 27 with Yosemite 10.10.3.
Hope someone knows how to fix this annoying problem.
Your LR is configured in one language other than English? If so, this is a known bug. See the remark made by Simon Chen employee under this post (you need to click on see more reviews to actually see): 6 Lightroom: Bug of negative values (in German). The comment includes a workaround solution that is to edit a text TranslatedStrings.txt.
-
Can move us the session values to with ExecuteParms
Hi experts jdev,.
With the help of 11.1.1.5.0 - adfbc jdev
but my only requirement same thing is added.normally what we do in execute with params. manullay write query something like ah: select * from employees where empolyeeid= :eid here eid is bindvariable. drag and drop in the type of execute with params into jspx page it will works fine.
is it possible. ?i will explain in details from start to end. i had employee login page. Username:100 // this username holds in session password:100 login button enters into index page welcome "100" when hits search page search page opens search page means i write vo as : empsearchvo select * from employees where empolyeeid= :eid and salary = :sid bindvariable eid: (default value) adf.context.current.sessionScope.get('eid') in expersion sid: this vo exposed as execute with params with af:table my search page: eid: 100 -output text // by default no need enter the session value showing here. sid : 10000 -inputtext //user has to enter this details search (excutewithprams) af:table details employeeid | salry | address | and so on details.
Why am posting the thread means session value is ui not come. so I can't get my result in af:table.
can someone help me? outside.You must assign the session for the parameter variable to the link of your page layer.
Select the link of your JSF page, look for the execute with params - look for setting set the NDValue to point to the value of your session.
Similar to this:
https://blogs.Oracle.com/Shay/entry/passing_parameters_to_adf_appl -
negative value to redo the size in Sp report
Hi all
I have 4 node RAC, HACMP & Oracle 9.2.0.8 on AIX 5.3.
Here is the example of Stats Pack report. I find the values of ve - to redo size per second.
What it means?
Pls take a look. Pls suggest.
ConcerningSTATSPACK report for DB Name DB Id Instance Inst Num Release Cluster Host ------------ ----------- ------------ -------- ----------- ------- ------------ XXXXXXX XXXXXXXXX XXXXXXXXX 1 9.2.0.8.0 YES XXXXXXXX Snap Id Snap Time Sessions Curs/Sess Comment --------- ------------------ -------- --------- ------------------- Begin Snap: 82369 04-Jan-12 05:00:03 405 ######### End Snap: 82370 04-Jan-12 06:00:41 406 ######### Elapsed: 60.63 (mins) Cache Sizes (end) ~~~~~~~~~~~~~~~~~ Buffer Cache: 12,288M Std Block Size: 16K Shared Pool Size: 3,312M Log Buffer: 4,096K Load Profile ~~~~~~~~~~~~ Per Second Per Transaction --------------- --------------- *Redo size: -890,917.38 -447,550.05* Logical reads: 29,698.77 14,919.10 Block changes: 1,056.20 530.58 Physical reads: 2,332.90 1,171.93 Physical writes: 39.46 19.82 User calls: 5,313.03 2,668.98 Parses: 406.04 203.97 Hard parses: 0.02 0.01 Sorts: 395.07 198.46 Logons: 0.28 0.14 Executes: 609.08 305.97 Transactions: 1.99 % Blocks changed per Read: 3.56 Recursive Call %: 0.57 Rollback per transaction %: 10.66 Rows per Sort: 20.69 Instance Efficiency Percentages (Target 100%) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Buffer Nowait %: 100.00 Redo NoWait %: 100.00 Buffer Hit %: 92.15 In-memory Sort %: 100.00 Library Hit %: 99.98 Soft Parse %: 100.00 Execute to Parse %: 33.33 Latch Hit %: 99.92 Parse CPU to Parse Elapsd %: 1.88 % Non-Parse CPU: 99.92 Shared Pool Statistics Begin End ------ ------ Memory Usage %: 34.71 34.94 % SQL with executions>1: 82.41 82.46 % Memory for SQL w/exec>1: 81.30 81.79 Top 5 Timed Events ~~~~~~~~~~~~~~~~~~ % Total Event Waits Time (s) Ela Time -------------------------------------------- ------------ ----------- -------- db file sequential read 7,824,742 10,471 53.48 global cache cr request 6,522,122 7,749 39.58 CPU time 1,037 5.30 db file scattered read 87,420 157 .80 inactive transaction branch 60 57 .29 -------------------------------------------------------------
MASIn the link below a forum member has also been confronted with this situation and has said something like he needs to apply a patch if it is the version 9i:
STATSPACK redo size negative value?Concerning
Girish SharmaPublished by: Girish Sharma on June 25, 2012 15:12
And answer below MOS note ID 308414.1 it why it is negative in 9.2.0.8. -
BUG? (%) Dial and dial gauges return odd if negative values of numbers
Using AnyChart 5 and Apex 4.0
When using a Dial gauge (percent), I'm trying to measure quarter percentage growth during the quarter.
Tell me Yes we have sales of $100 in the 2nd quarter of 2009 and the sale of $80 in the 2nd quarter of 2010.
We should see a percentage of 20% growth.
My query returns a single line as for the gauge. However the gauge indicates 1%. Positive rather than negative.
When I run my query in TOAD and APEX SQL WORKSHOP I get the OK - 20%.
So I pull the XMLfile URL on the < embed > tag and drop it in my browser. The XML returned with a positive 1 as the value of the gauge pointer. Because the XML generated by the apex_util.flash procedure, I'm guessing that there is a bug?
XMLfile = "http://apex.server.com:PORT/pls/apex/apex_util.flash?p=108:5:3130601357809295:FLOW_FLASH_CHART5_R5524931725885645_en."
generated:
... < type pointer = "needle" value = "1" color = "0xF1683C" >...
I even tried to make the series ' SELECT-20, max_val 100, low_val-100, 100 hi_val OF THE DOUBLE ' and then got a positive 1% on the dipstick?
---------
Published by: WannaRock on August 3, 2010 14:16
---------
Tried to switch to a regular dial as opposed to dial (percent). But then, any value should be returned, the dial has returned a value of-99. I need to try a few things and update this post...
-----
Published by: WannaRock on August 3, 2010 14:26
-----
Seems to be a problem when there is a negative value, AND you specify a up/down column in your query. IF I delete the columns high and low of the query, I get the right numbers when they are positive values. But the negatives do not return (for example, I had a 1% where I should have gotten a-84%). Strange behavior.Hi Walter,
You hit a limitation where gauge cards currently do support the display of positive values. However, this restriction has been removed for Flash 5 graphics and support for the display of negative values on the gauge cards will be included in our next release. This issue is followed by bug 10024437.
In the meantime, you will have to customize your chart XML in order display negative values. This would require that you replace the chains of substitution #SCALE_DATA # and #DATA # in the custom with your own
and area of XML information. Kind regards
Hilary
Maybe you are looking for
-
Siri on iPad 2 Air after updating IOS 10
Hello on my Ipad 2 Air after upgrade IOS 10.0.1 I have no option to change the voice of Siri in the male. The voice is that of the IOS 9.3.5. I did a complete reset, but nothing has changed. Is this normal?
-
ICloud synchronization with Outlook calendar
I'm trying to sync my calendar with my calendar in Outlook Windows 7 iCloud. When I try to enter a server account in my iPhone it it gets rejected. Help, please. Thank you.
-
To remove a separator in bookmarks
I can't find a way to remove a separator that I created in the bookmarks. I tried right mouse click below of the separator, since I couldn't place the cursor on the separator and liquidation just delete the bookmark below the separator. I also do not
-
Scan Tenable conclusion critical against WSUS Windows Internal Database on Server 2008 R2
I get weekly analyses of customer who uses a valid scanner (Nessus) and conclusion this week included a conclusion CRITICAL against Windows Internal Database of the WSUS that is installed on a 2008 R2 Datacenter server. The conclusion is the followi
-
MSNBC vidio freezes