NEITHER 9265 has an external 24 volt input but only output 7 volts
Hello
I have a cRIO 9076 with two modules NI 9265, NI 9207 module and NI 9482 module. I'm having is with the NI 9265 modules. I use an external power supply to provide 24 volts to the module, but each of the channels output reads either 7 or 13.2 volts. I need the modules to measure 24 volts for each channel so that the system works properly. Anyone know what is the problem or what I need to change to fix this? Thanks for your help.
Hello Leroy_Jenkins
You experience this behavior because the 9265 compliance voltage is 12 VDC maximum (Specifications Page 13).
Sometimes, the term 'Compliance voltage' in the specifications of the NI 9265 is confused. This specification might be explained to something like "voltage admissible Maximum."
There is a forum of discussion here that will clarify this point.
Concerning
Frank R.
Tags: NI Products
Similar Questions
-
ASUS N73S-64-bit laptop USB3 poort works niet! iemand een Holland has? External USB3 hardeschijf herkent hij niet!
Sorry, maar deze forums bieden support alleen in het Engels. Kies uw land yesterday: http://support.microsoft.com/common/international.aspx> en klik op voor support in uw taal pijl.
The time and date of this moment in California, the United States is
07:54Monday, July 22, 2013
The time Pacific daylight time (PDT)-0700 UTCUTC/GMT is 14:54 Monday, July 22, 2013
Current weather conditions in Los AngelesCloudy67 ° F / 19 ° C -
When installing acrobat 10 on Surface Pro 3, had Error 1006 "the volume for a file has been externally altered', how to fix?
Hi rickyf36983392,
Try to install Acrobat X using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.
Kind regards
Nicos
-
Why my ipod has several copies of the same album on my ipod, but only one on my list of itunes
My ipod has several copies of both albums, but I only have everyone on my list of itune. Synced the ipod, but it remains the sam (several copies of both albums)
For general advice, see grouping of tracks in albums . Older IPod such as classic to do not apply artist album so an album that looks OK in iTunes can break upward on the device. I recommend using a consistent value for the artist and the artist comments/featured information moving in the track names.
TT2
-
My Itunes has synchronized and made a backup but iphotos does not always open
My Itunes has synchronized and made a backup but iphotos still does not open when I connect my phone
< re-titled by host >
My Itunes has synchronized and made a backup but iphotos still does not open when I connect my phone
have you tried to launch iPhoto manually by clicking the iPhoto from the Dock icon?
When the lance of iPhoto, import Panel open and show your iPhone?
-
My USB to ethernet adapter works only if plugged into my MacBook Pro.
I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!
Any suggestions?
Juice what 'expander' did you use?
What model of MacBook Pro?
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessage, but when I click in the conversation, no text box for me to write as he does with everyone. It's driving me crazy. How should I do? The two contacts are in my address book and identified on my computer but I can't their message from my computer and have to keep spending on my phone to text their return. Their new messages are always also highlighted on my computer. In the photo I've included, you can see there is no text box for the text of the group with "Franny, dad."
Thanks for any help!
What happens if you start a new conversation with Franny & Dad from the IOW computer do not try to "catch" the conversation
Click on new message and put their names in there
If this does not work - remove the wire from the Mac and try again
-
External Toshiba HARD drive not recognized on USB 2.0 ports, but only on USB 3.0
Hello
I have a Toshiba drive external HARD 750 GB USB2.0/USB3.0
Now, this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port.I have try on port USB2.0 computers different (desktop, laptop) but it doesn't work. The LED is the lightning, but the drive does not appear in the file Explorer.
You have any ideas?
Thank you
> Now this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port
USB 3.0 port 900mA feeds. The USB 2.0 port common provides 500mA.
I think that the HARD drive needs more 500mA power in order to work properly.So if you want to use the HARD drive on USB 2.0 ports, I recommend you to use a USB Y cable which allows to connect the HARD drive to two USB 2.0 ports
-
I have a Macbook air running OS X El Capitan. I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices. I don't know if I need to restart the time Capsule or change the wireless setting, etc. ?
Please advise...
The TC appears in airport utility? If not then it is probably not part of your network or is lost... upgrade installed you El Capo because there a lot of questions.
What is the TC plugged into the network by ethernet? And configured properly? Are you to internet via the TC... but can not see his drive... that would be typical?
Have you set Finder preferences to display the network drives? Apple keeps making it difficult for some unknown reason.
You actually have to mount the drive TC if it appears under shared... it still may not appear if you double click on it. Under the search box on the top of the right hand you see Connect (As) box, type the name or IP address of the TC in there... Make sure that you save the password from your keychain.
I try to use my Time Capsule as external hard drive
For the storage of the files it is fine.
For the execution of direct files for an application in the Mac, you are very likely to damage or corrupt the file at some point.
And how do you do backups? Time Machine can't help you... it won't work.
Backup is crucial, especially if you do things apple say not to do... That is to say move your photos or the iphoto library to the TC and try to use direct from there... expect any day to need a resumption of the library.
-
I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.
You can run the latest version of iTunes for your version of Windows, but you are not running the latest version of iTunes is available and it's iTunes 12.3. You must run Windows 7 at least. I'm not a Windows user, but I think 7 is newer than XP.
Check this.
-
The z570 has not a regular Express card slot (only a mini one)?
The z570 has not a regular Express card slot (only a mini one)?
Hi KiteEye and welcome to the community,
It doesn't have an Express card slot.
The small slot located is a memory card reader.
Dave
-
My Facebook account has been disabled on my computer, but not my iPhone.
My facebook account has been disabled on my computer, but not my iphone
Original title: neta archer facebook
Hello
Use the following website links to Facebook help.
Facebook Help Center | Facebook:
Facebook Support Forums:
http://www.thefacebookforum.NET/forum
Concerning
-
Hello
I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:ID from step 1
Server NIBKSQLCLUST
Job name LSBackup_DRIB
Newspaper log shipping backup job step name.
Time 00:00:02
SQL severity 0
SQL Message ID 0
Operator by e-mail
Operator Net sent
Operator paged
Retries attempted 0
Message
2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.
2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.
2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.
2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-
The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.
Thank you
Boonlep coulibaly
Hello
I suggest you to send your request from the link and check.
-
The message says that it has a paper jam or paper but there is paper in it.
My printer has a paper jam that I corrected, but it will not print even though even he sends paper thru with nothing on it. The message says that it has a paper jam or paper but there is paper in it. Sent several things to print but quere said there is nothing to print. Help!
Contact the manufacturer of the printer. It is not a Windows problem.
Good luck.
-
I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.All the 4 sticks of RAM are the same brand and compatible with my motherboard.I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.I got a few BSOD - 0 x 00000109 - errors that I work.I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.These memtest errors concern the bars invisible RAM or the work those?Any ideas as to what should I do next?See you soon!Data sheet:
Windows 7 Home Premium 64-bit
Intel Core i7-3820 @ 3.6 GHz
ASUS P9X79
GeForce GTX 650
Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4Thanks Joel,
I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.So that's one mystery solved at least.I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.Thanks again.Nick
Maybe you are looking for
-
HP Pavilion ELITE HPE-510 t CTO: OPTICAL DRIVE SUDDENLY NOT AVAILABLE
HI -. Hope Paul reads this message and has time to answer... Well, from 1 day to the other Tower HP NICE (under Window 7 PRO - factory installed) has decided for this don't want to deal in ANY WAY with the factory installed PLAYER PERSPECTIVE. Specif
-
pre installed calendar app works not
Hi all My pre installed calendar app does not work. In addition, I tried to install other calendar applications, but they do not work too as they crash right after they start. My mobile is Sony Xperia Z3 with Kitkat 4.4.4 Your help on this matter w
-
Hey, I have hp 2346ee g6 that is come with win8 I downgraded it to win7 but I upgarde even win8. I have the product key for win8 but I tried win8 versions 64 bits of retail and oem and product key did not work, he said the product key does not work o
-
Windows vista pack 1 Setup error service: 0x800F0823
Ive been trying to get the .net framework 4 to work to be able to run a program and expert assistance for d... they said that I need to get SP2 first... but when I installed SP2, it says I need SP1, so here, I am now. It will install and then after a
-
Cannot use the Bluetooth Dongle with Windows 7
Hello I recently bought a Bluetooth USB Dongle (Esperanza BLUETOOTH v2.1. EA101) (not a best buy, but defiantly a cheep one). I can confirm that it is 100% functional and working. As I tested it on the other PC with Windows 7 (x 64) and my Linux mach