Nested ESXi 5.5 crashes with a misconfiguration EPT

Similar Questions

• Nested ESXi 5.5 lab for the SRM demo with iSCSI

  Hi all

  I was wondering if it is possible to install ESXi in ESXi 5.5 5.5 make recovery of the Server Tier - 1 Microsoft with Site Recovery manager?

  So level 1 server applications are: Exchange Server, SQL Server, SharePoint Server and AD DC servers with 5 x test Win 7 desktop.

  The external data store to the VMFS will take place by iSCSI NAS connected to the physical server.

  Any suggestion and input would be greatly appreciated.

  Thank you

  One thing you'll want to do is to make sure that use you VSphere switches distributed on your cluster nested to ESXi hosts so that you can use the network i/o control (NIOC). For me, I put iSCSI to high priority traffic and everything to normal priority.

  With the help of the NIOC will allow your cluster nested in order to operate more fluidly than without it.

  My SRM 5.x laboratory is fully nested - probably not supported in a production environment where supported VMware should however.

  Here's a blog post of Ather Beg on its results by using the nested NIOC and ESXi hosts - it is the reduction of the spikes that Ather blog article shows that made work nested ESXi hosts networks so much better:

  http://atherbeg.com/2014/02/04/why-enabling-NIOC-network-IO-control-in-a-home-lab-is-a-good-idea/

  Datto

• nested ESXi vHost, networking, the nested virtual machines cannot access outside the world.

  
  My Datacenter configured as follows:

  1. physical switch connected to 3 physical server.

  vCenter Server IP: 192.168.10.10

  two physical hosts ESXi: IP: 192.168.10.11/12.

  2. my laptop connected to the physical network, IP: 192.168,10.100.

  3. my two physical hosts configured with a Standard vSwitcher0, VMNIC0, portgroup MYLAN uplink vLan ID = 162, vmk0 vLan ID = 162.

  4. I created two nested ESXi vHost on the two physical host, assigned 192.168.10,101/102 IP, gateway 192.168.10.1

  5 standard vSwitch0 on two vHost, only NETWORK VM portgroup with ID vLan by default = 0.

  6. I have create computer virtual the virtual server nested and assigned to the VM using VM NETWORK, also assigned the IP address: 192.168.10.201, gateway 192.168.10.1

  But my VM, I cannot ping 192.168.10.1, also I can not ping the virtual machine (x.x.x.201) from my laptop.

  I can ping my vHost nested two of my laptop, can also connect to the console of the virtual computer through my vHost nest.

  my virtual world, my network is configured as it IS (external swith marking).

  my world physical host, my network is configured as a VST (virtual switch tagging).

  My Setup must in principle be correct, but it does not work.

  I am a newcomer to the world of VMWare nested.   I'm appreciated for any suggestions and help.

  The vSwitch on the physical host must be configured to allow the promiscuous mode and forged passes.

• Nested ESXi 5.5 laboratory

  I was pulling my hair out with this now. Trying to nest ESXi 5.5 within ESXi 5.1 on a HP DL380 G5, but I get the error: hardware virtualization is not enabled in the BIOS, when I try to install 5.5

  I already did:

  -Edited the file/etc/vmware/config for vhv.allow = 'true '.

  -Updated the VM to support v9

  -Changed the OS to ESXi 5.x (experimental)

  -Tried to edit the virtual machine's .vmx file, putting in vmkernel5 instead of 64 others in the field of guestOS

  None of this worked, always get the message about hardware virtualization is not enabled in the BIOS of the virtual machine. Anyone nestled ESXi 5.5 yet? If Yes, how did you you do and are there are instructions there. I tried following some blogs out there on the Internet, but nothing has worked.

  In addition, the BIOS of the physical machine is up to this day and ESXi 5.0 (nested or otherwise) ran flawlessly on the G5.

  Help is appreciated. TIA!

  If it were possible to use virtualized virtualization assisted by material on systems without EPT (Intel) or IVR (AMD) under ESX 5.0, this configuration was not taken in charge. EPT or IVR is now required for virtualization to support virtualized under ESXi 5.1 (and other VMware products that virtualized hardware-assisted virtualization support).

  Unfortunately, your CPU does not support the EFA.

• 5.1 nested ESXi

  Hello world

  I am configuring a nested ESXi 5.1 training lab on my production 5.1 esxi environment.

  The problem I have is that, once the installation disc starts, it does not detect the vmdk file in local storage.

  I created the guest computer using the web client so that it is hardware version 9, added the vhv.allow = true for the comments and also permit EPT Intel VT - x on the client.

  I thought that maybe it's because my local data store where I was hosting for the nested esx vmdk file was VMFS version 3 so I've updated that and it did not solve.

  Am I missing a step somewhere? Any help would be appreciated.

  Karl

  Maybe that's the problem with the controller. try and change the bus to the VMDK controller?

• Nested ESXi 5.0 Workstation 9 Networking question

  I use standalone desktop with 16 GB memory with windows 7 and installed workstation 9.  I created my configuration of base, DC, ESXi-host1, host2 ESXI, ESXI-host3 and host4 ESXI.  I also installed vcenter as a virtual machine within the workstation and I can access all the hosts and vm (DC, vcenter) by name and IP.  Also DC and vcenter, I can connect to internet using vnet0 (workstation).  My management is vnet3 and my storage is vnet4.  I created a new virtual machine called vcenter in ESXi-host1.  I then installed vcenter server and vsphere client.  Everything works well.  I went to install web client and adobe flash player, to internet access.  For switch 0 I vmnic0 active and vmnic1 in mode standby.  The ports VM group vm network which has vcenter vm and vmkernel port with network management.  I went into properties and accepting promiscuous mode network times vswitch and vm.  I can not even access the internet.  This is where I don't know what to do then.  Suggestions?  If you are in need of more data, let me know and I'll give it to you.

  Given that I have not found it necessary to connect to the external network, I have not deployed router. To test, I have now deployed a virtual router to connect external network and my VM on nested ESXi can connect to the external network and was able to ping the DC VC etc...

  (1) deploy a Virtual Router download by http://freesco.sourceforge.net/

  (2) connect two network to the router as a display in the snap-in and configure the router

  

  (3) configure the default gateway of all VM (that is to say DC VC and ESXi host) to use the IP of the router.

  (4) Finally the VM on nested ESXi can connect external network and ping to other virtual machines too.

• Unable to start x 64 VMs on nested ESXi host

  Hi gurus,

  I would ask your expertise on the question with my ESXi nested 5.1 checking. I managed to install the nested ESXi host, but I can't start a x 64 VMs. I continue to ask me what follows:

  
  Intel Core i7-3770 CPU @ 3.40 GHz
  DH77EB
  EBH7710H.86A.0100.2013.0312.1351
  Virtualization / VT - x is already enabled in the BIOS.
  Turn off the Bit is also activated.
  verified the host physical and NestedHVSupported set to TRUE
  added vhv.enable = "true" on the physics of the host \etc\vmware\config
  created nested ESXi VM
  original operating system is any other 64 bit
  Once the virtual machine is created, I changed the OS to VMware ESXi 5.x (experimental)
  NX/XD flag is already set to expose
  added - H - mask CPU; ECX
  Adds the following on the nested ESXi vmx file:
  Monitor.virtual_mmu = "hardware".
  Monitor.virtual_exec = "hardware".
  VHV. Enable = "true".
  monitor_control.restrict_backdoor = 'true '.
  Thanks in advance!

  According to the journal of the ESXi VM file, its configuration (.vmx) file does not contain the vhv.enable = "true" entry. Only the configuration file contains, that was how it should be done in ESXi 5.0, but not in ESXi 5.1.

  Try to add the entry to the ESXi VM and make sure you reload the configuration (see http://kb.vmware.com/kb/1026043) before turn VM ESXi.

  André

• VCenter Server Appliance fails without VT in nested ESXi 5.1 support

  I am trying to run vCenter Server Appliance in a nested ESXi 5.1 64-bit environment.

  At the start of the vCenter Server Appliance, it fails with:

  This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.

  This host does not support VT for more information, see http://VMware.com/info?id=152 .

  My configuration is:

  Hardware Intel Serverboard S1200BTS

  Intel Xeon E3-1230 V2 3.30 GHZ CPU

  (This processor supports VT + EPT)

  BIOS Intel VT is enabled

  Intel VT for directed IO is enabled

  Latest version of the BIOS

  HW-ESXI 5.1 vhv.allow = "TRUE" is defined

  VM-ESXi 5.1 CPU/MMU virtualization - Intel VT + EPT active

  vCenter Server Appliance has been installed with the VMware-vCenter-Server-Appliance-5.1.0.5200-880472_OVF10.ova file.

  What I'm missing here?

  MNGZ wrote:

  Set vhv.enable = 'TRUE' in my nested ESXi 5.1 makes no difference.

  Did you put this in the .vmx file for your ESXi 5.1 VM?

• Hi everyone, whenever I'm hot - migrate (Live vMotion) my VM nested under my ESXi nested in another nested ESXi VM VM, I get an error. Please find below the text. Please help me. Thank you!

  It's the error every time I migrate nested virtual machine while it is running: "the virtual machine could not resume on the destination during the early feeding the.»
  You are running VMware ESX through a hypervisor incompatible.  You cannot power on a Windows virtual machine until this hypervisor is disabled. »

  I already have the connections on my nested ESXi instances. Like, material = monitor.virtual_exec and monitor_control.restrict_backdoor. I also configured and I ran the echo "vhv.allow ="TRUE"' > >/etc/vmware/config order on my PuTTY that I connect to physics ESXi hosting ESXi nested VM instances." I also configured the VMs ESXi to activate MMU/CPU AMD Virtualization etc - V on the Options tab of change VM settings.

  I'm talking about vSphere 5.0 here people. Thank you so much everyone. What can I do or what I missed? I need to migrate my VMs nested under my ESXi nested successfully.

  Thanks again nested VM experts!

  ESXi does not support on your processor hardware-assisted virtualization.  If your processor is AMD - V, there was a design flaw with the first generation of AMD - V parts that we have chosen to not to bypass.  You will not be able to run virtual machines nested on this material.

  ESXi 5.0 supports AMD - V only on later processors and family 10H.

• Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes.

  Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes. It always sends Apple incident reporting, so I am surprised that they have not yet set. This is a brand new Apple iMac computer, I went for the best to have a trouble-free operation (I hate LAGS). But the computer hangs out sometimes which is disappointing. No one knows what to do to keep my computer running efficiently? In addition, someone at - it a solution to the issue with Notes crashing?

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Download and install the update of OS X El Capitan 10.11.6 Combo.
  6. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

• Google Chrome crashing with update.

  Google Chrome continues to crash with the new update for El Capitan on a Mac book pro.  How can this be corrected?

  Is Google Chrome, the latest version?

• Help please my iPad crashing with lines to the bottom of the screen can only help me

  Please help my iPad keeps crashing with lines running down the screen.

  Restore factory settings: use iTunes to restore your device iOS to factory settings

  If it does not help there is material damage

• PC crashes with DBO when downloading a file using Firefox to my iPad

  PC crashes with DBO when downloading a large file via WiFi to my iPad and using AVPlayerHD player on the iPad. There is no report of error in Firefox, just the crash dump Windows 7 due to the accident. Only the combination of Firefox on PC and player AVPlayerHD on iPad causes this crash. Any other combination of PC and iPad works.
  Examples:
  Firefox on PC and iFile on iPad works well.
  Google Chrome on PC works with all programs on iPad.
  Firefoc on PC and player AVPlayerHD on iPad crashes.

  So you get a Blue Screen of Death on your Windows Machine? You have the exact error codes that appear when you get this blue screen?

  Blue screens mean that you have a problem with a driver, hardware or virus on your PC, not with Firefox. I try to launch a program of analysis such as http://www.resplendence.com/whocrashedand see if she can tell you what triggered the accident. Also, make sure that all your drivers are up to date on your computer (especially the graphics driver: update your drivers graphics to use hardware acceleration and WebGL) and check the virus (Troubleshooting Firefox problems caused by malware).

  After that, if you still get the blue screen and crashed does not help, I would say to try to test your RAM with a utility such as http://www.memtest.org/

• Satellite Pro M10 freeze and crash with some programs

  Hello

  I have a M10 Pro Satellite...
  A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
  Already I have formatted several times, but the problem persists.

  Any idea what this may be?

  Thank you

  Hello

  For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

• iTunes, sync to Crash with Seven Pro 64-bit

  Hello

  iTunes Crash with this error message when I try to sync my iPhone 6 on my PC with 7 Pro 64-bit

  Problem event name: APPCRASH

  Application name: iTunes.exe

  Application version: 12.3.2.35

  Application timestamp: 56689eb6

  The default module name: CoreFoundation.dll

  Version of the default module: 1.750.32.0

  The default module timestamp: 55dd4433

  Exception code: c0000005

  Exception offset: 0009f63a

  The system version: 6.1.7601.2.1.0.256.1

  Locale identifier: 1036

  Information extra No. 1: 0a9e

  Information extra No. 2: 0a9e372d3b4ad19135b953a78882e789

  Information extra No. 3: 0a9e

  Information extra No. 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0x040c

  If the online privacy statement is not available, connection out of the version:

  C:\Windows\system32\fr-FR\erofflps.txt

  Can you help me solve this problem?

  Thank you

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Error sharing a trend similar to that in the third box, so a similar approach should work. Looking for CoreFoundation.dll in:

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  Delete if found, then repair Apple Application Support.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review the other boxes and the list of documents to support more far down page in case one of them applies.

  Your library must be affected by these measures but there are backup and restore advice elsewhere in the tip of the user.

  TT2