Network adapter driver does not work with the recovery discs provided by hp
Hello
My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.
Here is the hardware ID. Please provide a link to the drivers:
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_0280
Thank you
You are the very welcome.
It does not sound like a heat problem.
I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.
I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.
To do this, disconnect the laptop from the AC adapter and remove the battery.
Insert a rod through the air fan to keep the blades turning when you spray air.
Spray through the air intake fan and watch to see the dust out of the exhaust.
Repeat once or twice and blow air from the other direction of the drain line to the fan.
The other driver, you need is the driver of protection Protectsmart hard.
See if it works.
Tags: Notebooks
Similar Questions
-
Portege R700 - Windows 7 32-bit - NETWORK adapter driver does not work.
Hi all
I rebuilt a Portege R700 with Windows 7 32-bit o/s. I downloaded the drivers from the Toshiba site but could not get the only rider listed working card. It seems to install ok but will not work. If I try to 'put to date pilot' with Device Manager and point to the files expanded, he said that the required software is not found.
Is there a driver that works and can someone tell me where it is please?
Concerning
Dave
> No idea what driver NETWORK card works and also which driver, I need for the controller PCI of communication Simple?
This seems to be the controller of Intel AMT.
You can download the driver form Intel page.
Search for Intel AMT or check this link to the page of the Toshiba driver:[Intel Management Engine Interface | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 5379 & selSh ortMod = 1019 & language = 13 & selOS = 29 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 75561 & OSI D = 29 & driverLanguage = 42]
-
HP laserjet p1102w: wireless printer does not work with the new wireless network
My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you
Hi Shlomi,
Thanks a lot for the info. I'll give it a try today... -
I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
I have an acerDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - XY9X3 - JDXYP-6CJ97
The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
Windows product ID: 89583-OEM-7332157-00211
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0 x 00000009
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F20B4B72-1308-45BE-8F90-95E91A3F0AAF} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 64 *-*-*-*-6CJ97 89583-OEM-7332157-00211 2 S-1-5-21-923204104-223683984-168055983 Acer Extensa 5630 Phoenix Technologies LTD. V1.30 20090319000000.000000 + 00070333507018400FA 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
Installation ID: 004511331255365043724851364501374781338933223323713385
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: 6CJ97
License status: Notification
Notification reason: 0xC004F063.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTAh! -in this case, it is not necessary.
I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033
Open the Windows Update - click the link view updates installed on the left of the page
in the list, find the WAT update KB971033, and then uninstall it.
Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033
redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?
-
I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10. Is it possible to download Lightroom? I have the DVD with the serial number.
Download and install the trial version of Lightdroom CC.
Then enter your serial number, follow these steps
-
Network (NIC) card does not work with DHCP or static IP
Hi, I have a ThinkCentre M70e (0809-C6S) with a problem in the network card. The link led is on and Windows detects that a cable has been connected. But the network can not aquire a DHCP lease and does not work with the static IP address. I uninstalled the antivirus and tested nothing helps network booting. The same connecting cable to another PC, works great. If the NIC has been "burned"? Thanks Oliver
Thanks will check the power settings too. But I solved this problem by: - antivirus uninstall - uninstall the card NETWORK Marvell driver - reboot - disable NETWORK card in the BIOS - turn off PC - turn on the NETWORK adapter in the BIOS - install the downloaded in another PC Marvell NIC driver - antivirus install now the NETWORK card works again! Best regards, Oliver
-
External Combo CD-RW/DVD-ROM drive does not work with USB 1.1
Hello world
I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...
Thank you very much in advance.
Kind regards
Steffen RiegerHello
AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.
-
my hybrid HDD/SSD drive does not work with my new Y50
my hybrid HDD/SSD drive does not work with my new Y50
Help!
Hi YouMaCry,
You have any records? or a USB recovery?
If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).
To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!
See you soon
-
Sansa Fuze does not work with the Xbox 360?
I know that the console is capable of playing a MP3 player through it, I could do my job as Creative Zen. I don't understan why it does not work with the "rocket", the interface looks more simple on the surface of things. And I'm sure it doesn't because I don't have a HARD drive for my Xbox, it was working fine before.
The reson I am, I wanted to know because I wanted to know the other ways of playing my rocket while listening. the kool on my expirimentation thing is I found that the Xbox will charge my rocket when it is off and I can listen at the same time. I also found that my Playstaion 2 will work also in this copacity all-in-on.
Basically the Auto setting works well with the XBox. Select settings > USBMode > MTP or MSC.
With PSG, you can even play content protected by DRM rockets (IE Rhapsody) on Xbox.
-
Toshiba canvio 1 TB portable hard drive does not work with windows 8
The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?
Hi Michael,
Welcome to Microsoft Community and we are happy to help you on this question.
According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.
I ask you to answer some question in the context of this question:
Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?
I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.
You can check the link to verify this compatibility with Windows Compatibility Center:
Please answer us with the required information on this issue in order to help you.
Let us know if you have other Windows related issues.
-
Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm. 2015.0.1 20150722.r.168
What are your settings of GPU acceleration? As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity. You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.
Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right. It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.
Does this fit with what you see, or you are not able to change things at all? If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity. That's what I see after direction the lens above with a big brush continuously for 10 seconds. Note This is on a fairly quick NLE System.
-
SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?
Update Firefox 23.0 which published yesterday afternoon.
-
Portege M200 - pen does not work with the screen
So I bought a pen for M200 and reinstalled the operating system.
Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:
HID compatible mouse (I use the random DELL mouse)
Mouse PS/2 Cimpatible (?)
--------I think there must be something else...
Please tell me, forum, what drivers should I download to get the pen to work?Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?
-
my photo does not work with the screen saver
Photos has never worked on Apple TV 4 until today with the 032116 update, but my pictures does not work with the screen saver.
I dare you to try to tell me how to make it work. Please have a solution, someone.
Given that Apple isn't really care or help on these forums, it would be great if someone mentioned the steps.
Thank you
Can you elaborate on the question?
These are user forums and this is why you will not see the participation of Apple here
-
I updated my Apple ID, but only old man always appears when I try to update my password does not work with the old id. Can anyone help?
You can try to log in to your old account and then sign in with the ID again. Your applications will be always related to the original account - you must use the old account to update.
Maybe you are looking for
-
How to change the size of the protection GPT Partition
I have a MacBook Pro (mid-2012) with 250 GB SSD. Next to OSX, I used BootCamp to install Windows 8 and then improved to 8.1 Windows and Windows 10. Everything worked well to 8.1 Windows but when I upgraded to Windows 10, she could not make backups of
-
My son 6 IPhone lights. When he goes to school must turn off his phone and store it safely so that it doesn't have access to it all day. When he returns he turns and low on battery. This has happened for the last week. We tried to remove the last app
-
I'm paying my Netflix account expired with an Itunes card that I bought and it won't let me?
I started my account Netflix but my Apple Tv and my free trial version at the end I had no billing information. I bought an itunes card and bought it, and I know not it wont let me pay with my own money from itunes and I contacted Netflix and they sa
-
Delteing user account problems
I am trying to remove a user account from my main administrative account and will not delete. After clicking on the button Delete, it becomes inadmissible and I must continue to send error reports. Have I been hacked and not able to do anything whats
-
repeated on the 7.6.7600.256, error 800704 D update failures
Update 7.6.7600.256Details of the error Code 800704D I tried to do the update more than 12 times. After trying to update when I reboot to see if it took. Closing screen will freeze. I'm no computer wiz and would not care to make changes to registry