Network fusion in Windows Vista

Similar Questions

• home network to my windows Vista to my windows XP outboard HARD drive error (office of \\Tabletop\bu (k))

  Help me with the following, please - * address email is removed from the privacy *.

  This is the error I get when you go on my home network to my windows Vista to my windows XP with Service Pack 3 XP machine to look into his drive HARD outside (office of \\Tabletop\bu (k)). It was shared to the network as the other readers? KB/922120 has been installed and restarted XP.

  Office \\Tabletop\bu (k) is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions.

  Not enough server storage is available to process this command.

  Hello, JWpaynej,

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  http://support.Microsoft.com/kb/913628

  Another problem resolution

  http://forums.techguy.org/networking/289768-solved-you-might-not-have.html

  Error message: "insufficient server memory is available to process this command."

  http://support.Microsoft.com/kb/106167

  http://support.Microsoft.com/kb/225782

• Need network drivers for windows vista for hp dv6 3017 you notebook pc

  Hello

  My name is sachin, I bought computers multimedia hp-dv6 notebook 3017tu of delhi.

  I can't find the network drivers for windows vista operating system. Please guide, for this reason, I am unable to connect to the internet.

  

  Hi, Sachin:

  The device details reveal that it is a Realtek ethernet controller. I think it's the RTL8168 series:

  Try these drivers for 32 or 64 bit versions of Vista (they must be grouped in the driver installation file).

  Download and install the 4th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Paul

• Error read-only during the Windows XP networking with a Windows Vista-based computer

  Help, please.  We have set up a working group, the destop with Windows XP behaves as the server and laptop with Windows Vista is the other computer.

  We can share and open all files.

  The problem is with a mortgage loan software. (Chalice)  On the Vista computer, when you try to open a file, we get the error "the file is used by someone else.  You want to open the file in read-only Mode? "We have worked with their Tech Support who insists on the fact that it's a Microsoft set up the problem with the server computer.  In their diagnosis, they say that the cause may be "the server has locked files or you don't have full access to the records.  Their Technical Support remotely connected to our two computers and verified that we have the network set in place correctly-"everyone" has full control of the files.  Both computers have disabled the Windows Firewall.  How can I check if the file is locked by the server?  And why would he block specifically for mortgage loan software?  Any other troubleshooting help would be most appreciated.  They have guaranteed that this software can run on both Windows XP Vista computers & a set.

  Another question - when I right click on the folder that this error message, and then click Properties, on the general tab, attributes, the 'Read only' box is populated with a solid green box.  It can also be a check mark or a cache.  I deleted the solid green box and tick, apply settings, but still no luck.  What is the difference between the solid green box and the checkbox for that?

  Thank you to those who can help - we are really at a loss!

  Edit:

  Additional info - The Windows XP computer using IE 8, 32-bit, Windows XP, Media, 2002 Edition, SP3.

  The Windows Vista-based computer uses Vista Home Premium SP2, IE 8, 32-bit Edition.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Unable to connect to the ad hoc network created in windows vista

  Hello

  I created an ad hoc network on the laptop to my sister that is running windows Vista Home Basic Edition x 86.
  I installed ubuntu 11.04 alongside windows 7 on my laptop. I can find the network under ubuntu, but I can't connect to it.
  Can someone help me with this please?

  Hello

  Method 1:
  You can networks troubleshooting wireless with Ubuntu and check:
  https://help.Ubuntu.com/community/WifiDocs/WirelessTroubleShootingGuide

  Method 2:
  If you have problems with Windows networks and then check out the link
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Error 1606 could not access network location in Windows Vista

  I have a Windows Vista Home Premium laptop and receive an Error 1606. Could access the location %APPDATA%\ network  Can someone help me with this problem?  I downloaded fixit and that has not worked. Nothing seems to work.  I do not understand the thread on this issue from the past.

  > I downloaded fixit and who did not

  You use this difficulty?
  http://support.Microsoft.com/kb/886549

  In addition there a "difficulty It for me" request, it also has an instructions "I'll fix it myself.

• accidentally not uninstalled the network driver no internet network card. Windows Vista, suggest how to fix it?

  I accidentally uninstalled my network driver and now my computer says I don't have a network card and it does not connect to the internet. I currently use a windows vista, can anyone please suggest how to fix it?

  I accidentally uninstalled my network driver and now my computer says I don't have a network card and it does not connect to the internet. I currently use a windows vista, can anyone please suggest how to fix it?

  Hey Femi92

  I suggest that you use a friends computer to go to your computer manufacturers website and search for your model number for the network vista drivers

  Download and save to drive flash and then reinstall them using your computer

  Voila

  Walter, the time zone traveller

• Access Windows 7 PC on the home network from your Windows Vista PC

  I have 2 computers on my home network, a running Windows 7 and the other with Vista. I can access files on the Vista computer on the Windows 7 computer, but when I try to access the files on the Windows 7 computer from the Vista computer that I am prompted to enter a user name and password. I can never remember these setting up and try everything that I have said that they are incorrect. Help! How can I find what I need to get, or how do I reset the username & password to allow me to access the Windows 7 computer?

  Either create a user account on the machine name of Windows 7 user and password vista
  OR
  If you are not concerned with security, change the settings for sharing on the Windows 7 machine
  Center network and sharing Center/change advanced sharing settings / turn off password protected sharing

• How to map network drive on windows Vista windows 8.1

  I have shared a folder on my desktop windows 8.1 new and need to map to it from a computer runing vista laptop. He asked me a username/password. How and where can I configure this? on both machines? before having the machine 8.1 (former was XP) I've just mapped the network drive and everything was good.

  Type the name of user and password of a user on the computer Windows 8.1.

• Network Printer Setup Windows Vista 32 (Canon IP5200R).

  I followed the message and the answer to 'Network Printor Setup for Windows 64'.  I'm not there.  Maybe I should connect as a "local administrator also, but do not know how to do this."  which may or may not solve my problems but worth the try. Help, please.

  Thank you

  Jim

  Hello

  • Are what post you referring?
  • What happen when you try to start the installer of network printer?
  • You receive an error message?
  • Your computer is in the domain?
  You can check this link:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network
  Response with more information.

• How to upgrade the wireless network card in Windows Vista

  Hello

  Please how can I update the wireless network card?

  Thanks for the help

  Hello

  I suggest you try the steps from the following link to update the wireless network card drivers.

  a. right click on the Start button and click on Device Manager.
  b. display all devices on one.
  c. right-click on the WLAN driver and click on Update.

  Display us the results, once you try the steps above.

• HP Pavilion p6510y desktop network control for Windows vista x 64

  Title says it all.

  Hello:

  Download and install the driver 6th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

• I need help setting up my home network - windows vista.

  I need help to configure my network, I ave a laptop & hubby the computer w / dsl wireless rouuter. If I can get trhis to work, maybe we can work on the printer.

  Original title: help w / home network

  Hi Luvy,

  Thanks for posting your query in the Microsoft Community Forums!

  Looks like you need information to set up home networking on the windows vista computer.

  We're here to help and guide you in the right direction.

  -What is the number of brand and model of the computer?

  I suggest you to return the items online help and check if it helps.

  Setting up a network home

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-home-network

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  To install the printer on the network see Help below articles.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-in/Windows-Vista/install-a-printer-on-a-home-network

   

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows-Vista/share-a-printer

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

  before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

  I have checked the firewall and they took two computers, but still no luck.

  Hello

  Did you change your computer?

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

  Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

  I suggest you to install the update on windows XP.

  http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

  This reference so

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• Windows Vista, the network latency got bad

  Yesterday, I changed the network router on my Windows Vista (edition Home premium) and this led me to run some of the internet speed test sites.  I see high network latency on the network speed available test sites.  The download speed is very good, but my network on my Windows Vista system latency time increased from 19 ms to about 500 ms.  It is quite a big change (X 25), so I'm a little worried about it.  I don't think that it is a router problem because I also have a Windows XP system that is connected to the router, and he still sees about 19 ms network latency.  Just to be sure, I changed the system of Windows Vista and Windows XP system router ports, and the latency of each system has not changed, so I don't think that it is a router problem.

  I think so the network on Window Vista system stack has been damaged in some way, and I'm looking for help to repair.  My first thought was the restoration of the system, but I can't go far enough to make it useful.  The only system restore point that I currently have (for some reason any) yesterday, and it shows the same 500 ms of latency of the network on the Windows Vista system.
  Can someone help me to troubleshoot or fix this problem?
  Thank you very much.
  -Roger

  Well, one of those moments of "Doh!" ... found another article on the internet, this time, it gives an idea for my system... I was using Chrome 3.0 as my browser when I ran network speed sites that gave me the time of high latency, with that I was worried.  I found that my time of network latency on Vista, as measured by Firefox 3.5.3 is about 19 million, and for IE8 is about 10 MS, which both are very good.  My conclusion therefore is that Chrome 3.0 marked the beginning of a new era of the network latency that is bad for me.  Or maybe it's Eset Nod32, antivirus, it does not matter (when I turned Nod32 which made no difference to the number of Chrome, well off)...

  I had no idea that Chrome 3.0 was this badly inconsistent with everything that he fights with on my computer Vista, but I don't need because I have a couple of other browsers which are very good.

  Interesting, even when...

  -Roger