New construction various errors usually ntoskrnl.exe - please help

Similar Questions

• Black screen of death - NETIO. SYS and ntoskrnl.exe please help

  (I don't know if this is the right topic)

  Hello community,

  So I bought a new game PC 3 days and I have problems with BSOD I get + 3 times per day and I have no idea systems and things.

  Tell me everything you know aslong it's fixable.

  I checked BlueScreenView and those are addresses in stock:

  NETIO. SYS + 39d3e network subsystem i/o

  Ntoskrnl.exe + 75169 & NT Kernel System

  I have no idea on minidumps, nor how to open them and these things, please explain the problem to him and ask me what to know first.

  Thank you.

  FRozXY

  I would contact the two just to be sure but I think I understand the ram should be replaced and replacement ram shouldn't cancel you guarantee

• error message ntoskrnl.exe

  Hello, I am running Windows Vista. To restart pc after updating I got an error message saying the ntoskrnl.exe is missing or damaged and should be replaced. Status: 0xc0000098 I tried to re install with disk but cannot get past the splash screen. Help!

  Thank you

  See thread below the link for additional troubleshooting tips by jcgriff2.

  http://www.techsupportforum.com/forums/F217/solved-error-0xc0000098-Ntoskrnl-exe-missing-after-Vista-SP1-install-293580.html

• ERROR 0 X 80240009 PLEASE HELP

  error 0 x 80240009 Please HELP

  Hey,.

  I am running VISTA HOME PREMIUM 32-bit (SP 1 is installed) and I always had problems with windows update. I wanted to install service

  Pack 2 a long time ago, but it has not been successful - by saying that the system was not ready for it, and as he told me I went to the UPDATE of the SYSTEM

  PREPARATION TOOL (KB947821)... and I ran, and it showed: press OK TO INSTALL HOTFIX for WINDOWS KB947821, when ok is

  clicked, after about 5 seconds, an error saying: ERROR 0 x 80240009! now, I'm desperate to install SP2 that some applications require! PLEASE

   

  Help!

  Véronique, INDIA (16 yrs) (I swear I want to join microsoft one day!)

  Hi SakethS,

  Step 1:

  Try to solve this problem with boot.

  See the following Microsoft KB article:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Restart your computer and let any other window update of full operation.

  Step 2:

  This see below article provided Windows Help and search for the question.

  How to reset the Windows Update components?
  http://support.Microsoft.com/default.aspx/KB/971058

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• I can't convert pdf to word... always get error... Please help

  I can't convert pdf to word... always get error... Please help

  Hi jamiec78954247,

  Try to use the https://cloud.acrobat.com/exportpdf online service

  Let me know how it goes.

  Kind regards
  Nicos

• Several BSOD with error different ntoskrnl.exe + 75c00 involving most of the messages

  I am running Windows 7 64 bit on a homemade pc with the Asus motherboard, 8 GB of ram and a quad-core processor amd; If you need more specific information please ask. Most of the Bluescreens have different error messages, but all except one have been
  Ntoskrnl.exe "caused by the driver" and "caused by the address. Most occurred when playing computer games. in the middle of the test I have updated my graphics card drivers and a few various other and I checked the ram to find errors although I should probably give him a half-dozen more going on.

  I will try to download a few zippers of depressed on skydrive. bear with me, I never did this before. NOPE, I can't. I can't even * find * skydrive. Someone please care to direct me to how it works yet? * edit *-it won't let me zip minidumps anyway. I give up. I'm about to perform technical support on this thing with his sledgehammer.

  I tried to analyze the accident using windbg, but it fails to load the symbols for ntoskrnl. Here are some summaries of crash as recovered by the blue screen:

  062713-13478 - 01.dmp 27/06/2013-21:31

  KMODE_EXCEPTION_NOT_HANDLED

  0x0000001E

  FFFFFFFF "c0000005

  fffff800'02e86d9c

  00000000 00000000'

  FFFFFFFF'ffffffff

  Ntoskrnl.exe ntoskrnl.exe + 75c00 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7601.18113 (win7sp1_gdr.130318 - 1533) x 64 ntoskrnl.exe + 75c00 C:\Windows\Minidump\062713-13478-01.dmp 4 15 7601 276 080 6/27/2013 21:31:51

  062913-14024 - 01.dmp 29/06/2013-07:34:23

  KMODE_EXCEPTION_NOT_HANDLED

  0x0000001E

  FFFFFFFF "c0000005

  fffff800'03159 cd 0

  00000000 00000000'

  FFFFFFFF'ffffffff

  CLASSPNP. CLASSPNP SYS. SYS + 1901 x 64 ntoskrnl.exe + 75c00 C:\Windows\Minidump\062913-14024-01.dmp 4 15 7601 276 080 29/6/2013 07:35:21

  062913-13384 - 01.dmp 29/06/2013 18:54:47

  IRQL_NOT_LESS_OR_EQUAL

  0x0000000A ffffba80'09f27a60

  00000000'00000002

  00000000 00000000'

  fffff800'02f31c5f

  Ntoskrnl.exe ntoskrnl.exe + 75c00

  NT kernel & system Microsoft® Windows® operating system Microsoft Corporation

  6.1.7601.18113 (win7sp1_gdr.130318 - 1533) x 64 ntoskrnl.exe + 75c00 C:\Windows\Minidump\062913-13384-01.dmp 4 15 7601 276 080 29/6/2013 18:55:47

  062913-13962 - 01.dmp 29/06/2013-01:30:16

  PM MEMORY_MANAGEMENT

  0x0000001A

  00000000'00041284

  fffff680'0012 d 001

  00000000'00000250

  fffff700'01080000

  Ntoskrnl.exe ntoskrnl.exe + 75c00 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7601.18113 (win7sp1_gdr.130318 - 1533) x 64 ntoskrnl.exe + 75c00 C:\Windows\Minidump\062913-13962-01.dmp 4 15 7601 276 080 29/6/2013 13:31:17

  No specific information but if you look at the history of BIOS updated between your BIOS Setup and the last BIOS available you would appreciate that a number of improvements have been made.

  You cannot count any error report when you have detected a faulty RAM. RAM corrupt system files, making it unreliable reports. When you installed the replacement RAM you run the System File Checker.
  http://support.Microsoft.com/kb/929833

  I won't say there is no risk of update the BIOS, but if the instructions are followed carefully you shouldn't encounter any problem. The caveat is that you should not threatened the data files which can easily be saved on an external. You can't replace family photos and others.

• c:\\windows\system32\rundll.exe please help error message clueless me and computor's not workin right at all

  I have an error message on my desktop saying c:\\windows\system32\rundll.exe ive tried to download a tool to repair, but pc asking what program I want to open again theres none that can run it please help what I do

  Hello

  1. When you receive this error message exactly?

  Method 1:

  This problem occurs because of a missing or corrupted Rundll32.exe file.

  To resolve this issue, follow these steps:

  (a) put the CD ROM of Windows XP disc into the CD-ROM drive.

  (b) click Start and then click Run.

  (c) type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.

  (d) restart the computer

  Method 2:

  This problem can also be caused by a virus.

  You can download and run a full scan of the system using the Microsoft Safety Scanner and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• New to oracle database. Can you please help?

  I click on Start > > sqlplus
  I enter username System
  Password then *.
  * I leave the empty host string.
  
  I hit connect system / *.
  can * connect Alexandre / *.
  then I Pat grant connect, resource of Alexander;
  
  Then I type host and a command prompt window opens.
  
  He has the command line C:\oracle\product\10.2.0\db_1\BIN >
  
  All is well so far. I get connected and is also granted to connect.
  
  Before this line I type edit xyz.sql
  
  But I get a message that says * "Edit" is not recognized as internal or external command, an executable program or batch fichier.*
  
  I AM NOT ABLE TO WRITE A PROCEDURE, BECAUSE I GET THE ABOVE MESSAGE.
  
  I use Windows Vista Home Premium. I installed Oracle 10 g Exprees Edition for Vista (10.2.0.3)
  
  Please help me.
  Thank you.

  sqlplus is what you want. Alternatively, the SQL Developer may be more intuitive if you're used to a GUI IDE, (that's another topic).

  host is a sqlplus command that opens a command shell - you can get the world BACK on the Oracle database, where PL/SQL does not exist. It is used to temporarily leave the database and do something else at the system level without losing the current state of your sqlplus session.

  Short answer: you need not order host for what you are trying to do. It is only adding to the confusion.

  Example step by step (it's on Windows Vista Enterprise... Vista Home is the same)

  I open a windows command shell

  C:\Users\Brian>dir c:\
   Volume in drive C has no label.
   Volume Serial Number is 74D4-C846
  
   Directory of c:\
  
  05/05/2009  10:31 PM              Autodesk
  09/18/2006  04:43 PM                24 autoexec.bat
  09/18/2006  04:43 PM                10 config.sys
  10/05/2010  10:04 PM              inetpub
  03/08/2009  04:47 PM              PerfLogs
  10/11/2010  08:52 PM              Program Files
  09/13/2010  06:55 PM              Users
  10/05/2010  10:05 PM              Windows
                 2 File(s)             34 bytes
                 6 Dir(s)   3,747,790,848 bytes free
  

  Clearly, I'm in the BACK at this point. Connect to the database using sqlplus

  C:\Users\Brian>sqlplus
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Sat Feb 12 08:55:41 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Enter user-name: bbontrag
  Enter password:
  
  Connected to:
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  SQL> select * from global_name;
  
  GLOBAL_NAME
  --------------------------------------------------------------------------
  
  XE
  
  SQL>
  

  Clearly I am now in the database

  SQL> host
  Microsoft Windows [Version 6.0.6001]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
  
  C:\Users\Brian>dir c:\
   Volume in drive C has no label.
   Volume Serial Number is 74D4-C846
  
   Directory of c:\
  
  05/05/2009  10:31 PM              Autodesk
  09/18/2006  04:43 PM                24 autoexec.bat
  09/18/2006  04:43 PM                10 config.sys
  10/05/2010  10:04 PM              inetpub
  03/08/2009  04:47 PM              PerfLogs
  10/11/2010  08:52 PM              Program Files
  09/13/2010  06:55 PM              Users
  10/05/2010  10:05 PM              Windows
                 2 File(s)             34 bytes
                 6 Dir(s)   3,745,767,424 bytes free
  

  The host of sqlplus command opens a new command shell and drops me it. I do order things (file system) Shell instead of being able to issue sqlplus commands until I have to leave the session host.

  If you try to change xyz.sql NOW you are looking for a command on a computer named edit.exe or edit.cmd or something. My machine happens to have one - it is an old BACK (not Notepad) text editor

  If you do not have edit.exe on your machine you get the DOS error ' 'Edit' is not recognized as internal or external command an executable program or batch file. "

  C:\Users\Brian>exit
  
  SQL>
  

  I leave the shell and return to sqlplus. Here, I run the SQLPLUS to change the command, which opens your default text editor (usually Notepad)

  SQL > edit xyz.sql
  

  Notepad opens and I enter the following command:

  create or replace procedure foo as
  begin
   dbms_output.put_line('Hello, World');
  end;
  /
  

  I save the file and exit in Notepad. I'm in sqlplus.

  SQL> set serveroutput on size 1000000
  SQL> @xyz.sql
  
  Procedure created.
  
  SQL> exec foo
  Hello, World
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

• Download error in CC. Please help me!

  Why is the error?

  

  They operate all the functions except Apps

  I have a license for a single product - Adobe Muse

  I tried to uninstall all Adobe via AdobeCreativeCloudCleanerTool

  It does not work

  Please, help me!

  1. close the session for creative cloud application

  2 kill all processes through Adobe in the Task Manager

  3. WIN + R - %LocalAppData% - enter records - Adobe - REMOVE AAMUpdater and OOBE

  4 C: Program Files (x 86) / Adobe - delete or rename the folder Adobe Creative Cloud

  5 C: Common Files / Adobe - delete or rename a folder AdobeApplicationManager

  6. download and install Adobe Application Manager

  7 run the creative cloud and log in again

  Good luck to everyone!

• Date field (not not mandatory) causing an error... Please help!

  Hello, I'm a beginner when it comes to ColdFusion could someone please help with this question?

  I have a field date in my application which is not necessary, I want that the users have the choice to leave this field blank.

  Here's a breakdown of what I have in progress:

  On the add/edit page:

  < component cfinvoke = 'test '.

  method = 'get '.

  ReferenceNumber = '#URL. "RefIDNum #

  returnvariable = "record" >

  < cfset ThisIsTheDateField = DateFormat (record. ThisIsTheDateField, ' MM/DD/YYYY') >

  < cfform action = "process.cfm" >

  < cfinput type = "Text".

  name = "ThisIsTheDateField".

  value = "" #ThisIsTheDateField # ""

  message = "ThisIsTheDateField must be a valid date."

  required = "no".

  validate = 'date '.

  validateAt = 'onSubmit '.

  size = "50".

  MaxLength = "10" >

  On process.cfm:

  < name cfinvokeargument = "ThisIsTheDateField."

  value = "#DateFormat (FORM." ThisIsTheDateField) #">"

  On the SWC's Page:

  <!--> method arguments

  < cfargument = "ThisIsTheDateField" name

  Type = "date".

  required = "no".

  Hint = 'Field ThisIsTheDateField' >

  The value for this field of application:

  #CreateODBCDate (ARGUMENTS. ThisIsTheDateField) #.

  The error I get is:

  Error occurred while processing request

  The THISISTHEDATEFIELD argument passed to the add function is not of type date.

  If the component name is specified as a type of this argument, it is possible that a file of the component definition is not found or is not accessible.

  The error occurred in E:/site/test.cfc: line 56

  54:

  55: <! - add a record - >

  56: < cffunction = name 'Add '.

  57: returntype = "boolean".

  58: index = 'add record' >

  I need a way to make this field accepts empty input... when I leave the field blank, I get the error above.

  Thank you!
  

  
  

  ear,

  If you want to use an optional argument in your function, you must be able to check whether or not a value for the argument had passed.  Use IsDefined ("arguments. ThisIsTheDataField') for its determination:

  Looks like you can also consult the documentation on Coldfusion functions here (http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24-7ff3.html).

• New in vmware, error cannot open parent vmdk.help, edit vmdk.file, please

  Please I have the error message on: cannot open parent vmdk.

  Please can someone help me? the virtual disk file name I wan Edit is = "fr_windows_7_ultimate_x64_dvd_X15-65928-000026 - s001.vmdk.

  Here is the file descriptor:

  criptorFile

  version = 1

  Encoding = "windows-1252".

  CID = aad2e91e

  parentCID = 14e7cc00

  isNativeSnapshot = 'no '.

  createType = "monolithicSparse.

  parentFileNameHint = "fr_windows_7_ultimate_x64_dvd_X15-65928 - 000025.vmdk.

  # Description of the measure

  RW 125829120 CLAIRSEMES ' fr_windows_7_ultimate_x64_dvd_X15-65928-000026 - s001.vmdk.

  # The database disk

  #DDB

  ddb.toolsVersion = "9282.

  ddb.longContentID = "5c0253c37a15c8025a7240daaad2e91e".

  DDB. UUID.image = "d9cf437f-ce5a-44c5-a2fc-ae827d943fbd".

  DDB. UUID.modification = "08a3938b-5104-48d7-a7c2-3ae24c927d05".

  DDB. UUID.parent = "00000000-0000-0000-0000-000000000000".

  DDB. UUID.parentmodification = "00000000-0000-0000-0000-000000000000".

  DDB. Geometry.Cylinders = "0"

  DDB. Geometry.Heads = "16"

  DDB. Geometry.sectors = "63"

  Do you do the thing that is supposed to be the name of the parent file:

  parentFileNameHint = "fr_windows_7_ultimate_x64_dvd_X15-65928 - 000025.vmdk.

  or

  parentFileNameHint = "fr_windows_7_ultimate_x64_dvd_X15-65928 - 000026.vmdk.

  And do you something that is supposed to be the description of the measure:

  RW 125829120 SPARSE "fr_windows_7_ultimate_x64_dvd_X15-65928 - 000026.vmdk.

  Or

  RW 125829120 CLAIRSEMES ' fr_windows_7_ultimate_x64_dvd_X15-65928-000026 - s001.vmdk.

  Do you things that my vmdk.files is corrupted?

  Thank you.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1007969

  try this link to verify and re-create the file discriptor above...

• Cannot install the updates, error #0 x 80244004, please help

  Message bed site has encountered a problem, cannot display the page you are trying to view.  This happened after I installed the window update agent 7.4.7600.226 on June 21,2012. No updates since then.

  Please note that the version of WUA 7. 4. 7600. 226 is the old version that was supposed to be automatically updated on June 21 at the new and current WUA version 7. 6. 7600. 256

  The problem that you see now may occur when there is a version mismatch of the file with the Windows Update Agent files, which is a mixture of old files with the new files. This is due to an installation "or damaged."

  We would be able to help you better if you provided the windowsupdate.log file. Look for error codes or entries that are similar to the. -.

  Setup FATAL: error 0 x 80070005 when you try to open the file C:\WINDOWS\system32\wuapi.dll
  Installation FATAL: ProcessDelayedCopies failed: 0x80070005
  The FATAL service: failure difficulty starting the service registration: 0x80070005

  OR

  FATAL: update required for C:\WINDOWS\system32\wuweb.dll: target version = 7.4.7600. 226, required version = 7.6.7600. Installation of 256 * IsUpdateRequired = Yes

  Especially the wuweb.dll c:\windows\system32\wups.dll wups2.dll, c:\windows\system32\wuapi.dll files.

  You can try to re - register the WU files > http://support.microsoft.com/kb/958053

  Good luck and please let me know if problem solved.

• Canon MG5450 cannot be set as the default printer, error 0 x 00000709, please help!

  Hello MS community.

  I'm lost, I tried several things to solve this problem, but could not succeed.
  My system is:
  Windows 7 Home Premium SP1, stable and works well with a score of 5.9
  My printer has been installed and deleted 3 times already and I tried both set up as a network printer or a USB connected. At the moment I installed it as a USB, but this will not let me install the default printer.
  First the printer is accessible and print successfully from Word, ACDSee and some other applications but is not recognized by Adobe such as Photoshop & Acrobat products and does not Excel print. I know that this error has been discussed in several other threads, but yet I could not find a solution that worked.
  I tried to repair the registry as following the instructions here about something else:

  (a) click Start.
  (b) type regedit in start search and press enter.
  (c) access the site mentioned below.

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
  
  (d) in the right column, you will find key device, change the value of your printer name.
  (e) it is for example in the format: "HP LaserJet 4250 PCL6, winspool, Ne03:

  (f) right click on the value and click Rename, replace with the name of your printer.

  When I try to change the key it doesn't let me, even if I ran regedit as an administrator. It is said:

  Cannot change the device: error writing to the new content value. I wanted to put: series of Canon MG5450 printer, winspool, draw:

  even if in the example, she said winspool, Ne03. I thought I could leave I had in default.

  i also see another key which is:

  Load REG_SZ C:\Users\-(my user name here)-\LOCALS~1\Temp\mshikra.bat

  This also I do not know what because if I go to this folder this .bat file is not present.

  I also tried this tool:

  http://support.Microsoft.com/mats/printing_problems/

  and when he said will analyze it: series of Canon MG5400 printer is not the default printer, and then I clicked on fix it and id not said, not successful.

  Now I don't know what else to do.

  The only true left to try perhaps would be to reset all the settings of the printer (the printer connects to the home network with the wifi password) may disable the wifi wireless option, if possible. Switch it off and remove all the entries of the printer and try again to install it, but then perhaps on the administrator account.

  ideas? suggestions?

  Hello

  If I understand correctly you are facing problems with the configuration of the default printer. Do not worry, I'm here to help you with this question.

  I would like to know how you're trying to it set the default printer, so that we can help you better.

  Let us try the following methods and check if it works for you.

  Method 1:

  Run the printer troubleshooter.

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Try the steps in the Microsoft Help article and check if it works for you.

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:

  Turn on the Windows Firewall temporarily turned off and then try to print.

  Enable or disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  WARNING: Disable Antivirus\Firewall temporarily, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  For more information, see the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  Please answer if the steps not help, so that we can better help you.

• Sync blackBerry Smartphones DTM 6.0 error 2753 and errors of windows install, please help

  I tried to install and uninstall more than 5 times with the same mistakes

  This is what happens when I install it

  When I start to install on Win7 64 bit 6 DTM, first message said.
  Windows install, waiting for Microsoft Visual C++ 2008 Redistributable, it says failed to install even if its already installed tried to install it, but then, that's why I cancel this port on the installation ending.
  Now when I run the application and click on save, I get a box saying the error message said: "the component you are trying to use is on a network unavailable resource."   It looks for the file Apploader.msi in the directory C:\Documents and Settings\user\Application is in Motion\BlackBerry\... I tried searching Apploader.msi, but there isn't, so I have to cancel, if I continue to by pressing cancel what he finally back up. but I can't sync I get an error message whenever I try to configure the synchronization configuration parameter. error 2753 than Nokia MsOutlookApiProxy64.exe D9D285E5_C9F0_4101_A12C_555AE1C1593F is not marked for installation

  I tried searching the Web, but no one can help you, as you say it if I can't sync.
  Please if anyone can help with this problem, I would consider their genius

  I've manged to remove BB 6 and the mistake of silverlight went, but when I try to install bb 601_b021

  I always get the error message.

  "error 2753 than Nokia MsOutlookApiProxy64.exe D9D285E5_C9F0_4101_A12C_555AE1C1593F is not marked for installation"

  and the application installs any ideas how to remove this error please.

• Blue Screen errors and random crashes, please help!

  Hello, I built a computer about a month back, and now, whenever I try to play games and talk on Skype/teamspeak all crashes saying that nothing does, and when I try to open another program it crashes instantly and now I get random blue screens. Here's the code for the blue screen: STOP: 0X0000007E (0XFFFFFFFFC0000005, 0XFFFFF80002E9CBFI, 0XFFFFF880009A99D8, 0XFFFFF880009A9230) I look at the time and make sure that nothing is overheating, but it sews blue screen randomly, I tried to install windows debugging tool, so I can see the dump file, but whenever I try to install it, it says installation failed, it's my only computer, and I need it for school help Please.    Also, when I got this computer ready to go, I took the hard drive from my old computer and transferred the files and some games.

  System Specs:
  NZXT Guardian 921 RB black, blue LED
  Two Green Logisys sound active Cold Cathodes
  AMD Phenom II 970 x 4 3.5 Ghz
  Zalman CNPS9700 LED blue 110mm 2Ball CPU Cooler
  HIS Radeon HD 5670 Itceq
  OCZ ZS 750w ATX POWER supply
  ASUS M5A97
  8 gb Corsair Vengeance 240 pin 1600 mhz
  1 TB Seagate Barracuda 7200 RPM
  Windows 7 home 64-bit

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.