New drive HARD &; OS errors->; HP 8000 Elite Small Form Factor PC
New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC
Can not install Win XP on another hard drive
I work with a...
HP Compaq 8000 Elite Small Form Factor PC
Original SATA HDD is loaded with Windows 7 Pro.
In order to install a program using this PC as a digital video recorder
I installed the video capture PCI card and related software. I had problems
associated with software and Windows 7.
I know that the software works with Windows XP.
Do not want to remove the original HDD, I tried my win7
to replace the HARD drive and do a clean install of XP.
I get the same error during the installation of the OS. I tried different
SATA and different XP install disks.
The error I get is shown in this photo.
Original HP HARD drive is a Hitachi 160 GB
I tried 2 known to be good SATA drives.
Seagate 500GB
WD 80 GB
I checked the bios settings and even revenue tio rear BIOS
default settings.
I get this error even with everything I tried to do.
This happens during the OS install just after or during the process of the installation of temporary files are current
written to the HD.
When I re - install the original HD loaded with Win7, everything works as it
expected.
Any ideas on what] s going on here?
Hello:
The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.
Has Windows 7 and XP is too old an operating system to make them.
Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.
The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.
The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller. If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.
Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.
Tags: HP Desktops
Similar Questions
-
8200 elite Small Form Factor: can I add a graphics card in my computer?
So I have a HP Compaq 8200 Elite Small Form Factor and I was wondering if you can add a dedicated graphics card. If so, what are compatible?
Video cards that will be compatible must be discreet and very low power 16 x PCIe video cards. Low power generally assimilated to the discreet with less than 1 GB of video memory video card. Use these criteria when searching for candidate upgrade video cards.
The following video cards have been listed as optional and is compatible with your HP SFF PC desktop computer.
graphics card nVidia Quadro NVS295 PCIe x 16, 256 MB 641462-001
graphics card from nVidia Quadro NVS300 PCIe x 16, 512 MB 632486-001
Graphics ATI Radeon HD6350 PCIe x 16 512 MB 637995-001
Graphics ATI Radeon HD6450 PCIe x 16 512 MB 637996-001
AMD over-pants 2270 PCIe x 16 graphics card, 512 MB
Upgrading the PSU to what would be needed for a video game level card is not sustainable for a Mini PC like yours.
-
PCI errors - Compaq 6200 Pro small form factor
I had a major breakdown of the system OP, the new hard drive, the new installation of Win 7 Ultimate... everything works fine, except PCI Serial Port & Simple communications controller PCI in the... Device Manager showing the error
I went to download drivers page and downloaded and executed every driver available but still have PCI errors...
Help please & thanks in advance.
JWalters
Hello:
You need this driver... install the driver manually if you need to.
There are records of pilot for both devices.
-
I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory? Its not partitioned to another eather drive
original title: hard drive problems(1) what does your BIOS the drive size?
============================================================
2) disk hard test - find your make and model:
Speccy - computer/system information in detail
(More detailed look at your memory and CPU)
OS, CPU, RAM, card, graphics, hard drive, optical drive
Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - CD Bootable:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic================================================================
(3) HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
http://www.almico.com/SpeedFan.php-Partition management utilities-
Partition Wizard Home Edition:
http://www.partitionwizard.com/free-partition-manager.html
Note: There is also a CD bootable or versions of the bootable Flash drive:
CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
Among the features and functions: create partition, Delete partition, format partition,.
A partition resize, move partitions, Partition recovery after an accidental deletion,
Convert the partition, partition Explore, Hide partition,
Change the drive letter, a partition active Set, Explorer (content display) of the partition.
Note: To complete any task use the "Pending Operations" box at the bottom left.Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
EASEUS Partition Master Home Edition (free):
http://www.partition-tool.com/
Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.J W Stuart: http://www.pagestart.com
-
Guys,
I wonder if someone can help me.
I need to add additional hard disks to several virtual machines and use the vSphere PowerCLI v5.1 against a vCenter Server running 5.1.0b. When I try to add the disc using the cmdlet new-hard drive, I get the following error:
New-harddisk: all parameters can be solved using the specified named parameters.
On line: 1 char: 13
+ new hard drive < < < < - vm WinXpMstr - capacityGB 100 - diskpath "[MV] WinXPMstr/1234.vmdk".
+ CategoryInfo: InvalidArgument: (:)) [new-harddisk], ParameterBindingException)
The full syntax of the command to run is:
new drive hard vm - WinXPMstr - capacityGB 100 - diskpath "[MV] WinXPMstr/1234.vmdk".
Thank you
PaulYou mix the different parametersets of the cmdlet New - hard drive settings.
In your case CapacityGB and DiskPath cannot be used together.
-
I don't have a 2nd computer. Is it possible to migrate an external backup, and then on a new drive hard mac?
Use Time Machine or a clone to copy to the outside.
Clone - Carbon Copy clone (Often recommended because it has more features than others)
Clone - 6 tested Applications Software
-
How to replace a new drive hard satellite 1670cds
How to replace a new drive hard satellite 1670cds
do I have to remove the keyboard?
wath is the GB limitHi Theo,.
HARD drive is mounted on your machine fest, and it is not easy to change. First you have to remove the keyboard, then view and top of page coverage too. If you want to do it yourself, be careful. If you do something wrong, it can be very expensive.
It is not easy to say which is the limit of the HARD drive, but I'm sure you can use 10 GB with no problems. Try to contact the after-sales Service of Toshiba partner. Perhaps, they can give you specific information.
Good bye
-
HP compac 8000 elite sff: need Driver Pack for hp compac 8000 elite sff - Win7 32 bit
Need Driver Pack for hp compac 8000 elite sff ASAP!
The 8000 is not registered here http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x86.html
Is it archived somewhere?
I think I found my answer... While they do not appear as a download with the rest of the driver packs, you can go to the regular pilot and under software download page - management system, you can download drivers for Windows 7. It gives you sp46096.exe.
This seems to be the original version... 1.0 Rev is May 21, 2010... If anyone knows an updated version, let me know.
HP Compaq 8000 Elite Professional PC integrated drivers for Microsoft Windows 7
-
Why my expoler does not see my new drive hard when it is in the device as o.k. Manager.
Look for the drive in computer management, it may need to assign a drive letter.
Change, add, or remove a drive letter
http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter -
I have announced a new drive hard into my laptop but I lost my pictures is possible that I can recover by logging into the windows photo gallery
When you replaced the hard drive, everything that was in the old man disappeared. Of course, because he's gone.
Reinstall your photos from the backup that you made before you replaced the hard drive. Oh, you save all of your date? Oops!
-
Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13. Today a mesg says: "Windows did not find antivirus software on this computer.
What should do?
Download another copy of McAfee and activate it with your existing license.
Ask for advice here: http://service.mcafee.com/Default.aspx
-
HELP-Compaq Presario CQ70 - new drive hard = Nothing
Hi all, computer dummy here and I need help.
the Seagate Momentus 250 gb 5,400 RPM hard drive failed completely on my Compaq Presario CQ70.
I bought a new Seagate Momentus 500 gb 7,200 RPM.
I had Windows Vista installed on my laptop.
but when I'm the new hard drive, I tried to install Windows XP (that I don't have a Vista disc).
in any case, I inserted the new drive hard and drive XP OS then - NOTHING.
just black screen and after a while, blue screen saying windows has been closed.
When I go into the BIOS I do not see the hard drive and everything, but I can run a hard drive test and it passes.
I have removed and reinserted the hard drive and run the XP OS several times but still the same.
did anyone can help this old man so I can get my laptop up and working again.
Recognizing.
Andrew
Hello again, Paul and once again thank you.
I have a Windows Home Premium OEM installation disc.
I wanted to wait get your response re Home Premium before I considered a set of recovery discs using the info you provided :-)
I'll try to install Home Premium if that does not work then I get a set of recovery disks.
Kind regards
Andrew
-
'HP Compaq dc7900 small form Factor PC' - 4 TB HARD drive
The "HP Compaq dc7900 Small Form Factor PC' sees a 4 TB HARD drive?
I plan to buy a bigger hard drive for my desktop and I would like to know if the "HP Compaq dc7900 Small Form Factor PC" can take a size of 4 TB HDD.
Maybe you can, but I can't say for sure.
You will be able to format the disk to the GPT so that windows to 'see' a large partition.
Read this white paper for more information - page 4 in particular.
-
PC HP Compaq 8000 Elite: Hard drive of PC HP Compaq 8000 Elite
I want to spend the hard drive in my 8000 Elite. It seems that all are 6 GB/s (SATA 3) these days. Seagate said I'm looking at that will work if my computer is not 6 G/s if the controller supports the SATA speed autonegotiation.
question 1: what is the speed of the controller, I spent the last two hours looking unsuccessfully.
2nd question: is this the controllers SATA speed autonegotiation support?
Thank you!
Vince.
Hello:
I'm running a Sandisk 240 GB SATA III (6.0 GB/S) SSD in my 8000 Elite CMT and it works fine.
I used to have a 1 TB SATA III hard disk in it. It worked very well also.
It will only work in the SATA II (3.0 GB/S) of speed, because it is so fast that the Intel 4 series chipset will run to.
The first 8xxx Elite business desktop PC that could run at a hard drive SATA III 6.0 GB/S pace, is the Elite 8200 series with the Intel 6 Series chipsets.
Do not exceed a HDD 2 TB in your PC if you intend to use it as a boot drive. The BIOS does not support the readers from over 2 TB to be used as boot disks.
-
Drive hard new Compaq 100 getting b Small Form Factor PC Windows 7 Pro error too small
I have a Compaq 100 b compact PC running Windows 7 Pro and I am trying to replace the traditional hard drive with a Solid State hard drive due to an imminent disk failure error I get. After installing the new drive, I put the system restore disc in the drive and when it gave me the option to restore the drive to factory settings, I clicked 'Yes' I then get an error that says "the hard is smaller that the original disk in the computer, cannot continue.", or something very similar. Anyway, it gives me no options, only to leave the restaurant. What can I do about it?
Hello:
Recovery discs do not work on a smaller hard drive.
This works...
If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.
Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.
Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.
http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
Use 25 characters on the PC product key to activate the installation.
The key will activate a 32 or 64 bit installation.
Then go to the support of the PC and driver page to install the drivers you need.
Link to downloads ISO of W7 is below.
http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/
Paul
Maybe you are looking for
-
Hello. I find a strange behavior of Firefox v21. If the 'windows' path used *.htm file slashes to the java scripts (on Unix, hosting with apache). Firefox says 404, but other browsers (such as Opera, Chrome, IE10) works properly with this.
-
Viao boot repair is what I need, but it says to contact the manufacturer. Everything worked before going to bed last night. I have not added the "new features" or programs
-
delete the activation of the software Assistant
I want to remove the Activation Assistant provided with MS Office 2010 on my new 64-bit 6727c. I know that this is not a site of MS, but I hope someone can point me in the right direction. I tried, without success, which suggests a site Ms. I used th
-
Problem: WEP key 13-digit
I am trying to get my (wpc54g v3) Wireless PCMCIA card I use in my old laptop working on another. Both are running Windows 2000 SP4, both set up correctly and that you can see their networks. The problem is that, on this new machine, I connect to a
-
CSK/signature of rejected password - server problem? CRITICISM
Hello I am unable to get Momentics to accept my password of KSB when you download a debugging token for the device. I did not change the password. It worked fine for months. Password has not changed. Device is properly connected to Momentics. Is the