New hard drive for errors

I have a new 750 GB Western Digital hard drive that has suddenly stopped working correctly and could not be seen by windows. I ran as a dell diagnostic on it and it came back with the following error codes:

0F00:013E

0F00:023E

0F00:043E

0F00:123E

0F00:1A3E

They all say "MSG: IDE device failed." A possible failure is predicted by the SMART State of the reader. It is advisable to immediately back up your data.

Could you tell me exactly what do these codes mean? Also it means that if I reformat the drive it will be very good or do, I have to go back as a bad disc?

Thanks for your help


Tags: Dell Drives

Similar Questions

  • new hard drive for laptop computer tried to install windows XP

    Just fitted new hard drive for laptop computer tried to install windows XP, continues by saying can not find any hard disk. any help would be appreciated

    Hi JohnJelf,

    ·         What is the brand and model of the laptop?

    ·         What is the full error message?

    ·         The new hard drive detected in BIOS?

    I suggest you to contact the manufacturer of the laptop computer for more help and information.

  • I would buy a new hard drive for my Compac SR5450F

    I was wondering if I bought a new hard drive for my Compac SR5450F will be work from my original restore on anybrand disk or do I have the original hard drive that accompany it.  If I have the same need could you show me where to order on HP.

    The Compaq SR5450F comes with a 500 GB Sata hard drive.  You must replace it with a disk of size equal to or greater.

    The Spec is 3.5 "SataII / 3GB / s 32 MB cache. Seagate and WD Black are very popular.

  • I can install Windows 7 on a new hard drive for HP Envy m6 1205dx

    My HP Envy m6-1205dx son is a notebook of 2013. The screen was broken and I replaced one. Now he says that there is not a BONE, I tried to install a full version of Windows 7 Professional, and he said that he there was not a boot device. I've reconfigured the BIOS to boot with the CD/DVD ROM and it started installing. When he arrives at the point of asking where to put the installation there is no option. I checked the connection to the hard drive and it is not a problem here. I think to buy a new hard drive to install the Windows 7 operating system, I am afraid that it will not work or he will say that I need to install the drivers. This laptop originally supplied with Windows 8. Can I install this version of Windows on this laptop? If I need to install the drivers how can I get them? It cannot be a website to download the drivers on your computer. I can't do without the computer having an operating system. I downloaded some drivers from a link, I saw on You Tube and put it on a flash drive, but none was consistent, one of them did read on a different/more older computer I tried to install this OS on and it says that the driver was out of date. It seems to me that a (FULL VERSION) drivers and everything else you might need. I'm not computer savvy, so I do not know! I'm just trying to save my investment of $600 on this computer without spending $300. I can get a new hard drive for $80 and it was on that I would go; However, I will buy a new Windows 8 operating system if it is the only option.

    There is no device driver Windows 7 for your model, only Windows 8:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5359748&cc=us&DLC=en&LC=en

    If there is no driver, your PC may not work correctly (No. LAN or WiFi, Audio, USB, etc.) after the installation of Windows 7.

    Check your hard drive, if the laptop has been abandoned the drive may be defective and must be replaced.

    You can order a support of HP recovery:

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07143&cc=us&DLC=en&LC=en&product=5359748

    J W Stuart: http://www.pagestart.com

  • I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

    I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

    Using the Dell recovery disks to reinstall?

    The origonal drive failed?

    If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

  • New hard drive for HP6930 - BSOD when installing the OS

    I recently bought a new hard drive for my HP6930 so I can switch between my work and home demands (they cannot reside on the same hardware).

    Both drives are Fujitsu SATA 160 GB.

    After swapping the drives and boot from CD to install the operating system - I get a BSOD, hardware failure - "the system was arrested to prevent damage...". "with a comment about the check of the hard drive.

    Can anyone provide insight into what I'm doing wrong?

    Thank you

    Dave

    You can integrate the drivers Sata (ICH9M-E/M SATA AHCI) and burn a new cd XP with nLite .

     

    Here is a guide showing how to integrate and here drivers Sata. 7-ZIP or Universal Extractor are good at unpacking the installer.

  • New hard drive for HP Pavilion dv6 drive because of error messages 303 and 305

    Hello

    My laptop was getting slower and slower, so I did a restore default via the recovery partition, and when it restarts to start reformat and reinstall back to factory condition, I got a message on the screen telling me to run the hard drive test. Did it and got error 303 and 305 messages. Restore to preset works however, after doing research in the error codes I go account, I'm for a new hard drive.

    My laptop is a HP Pavilion dvd6-3203TU with WIndows 7 Home Premium installed. It currently has a disk 320 GB TOSHIBA MK3265GSXX HDD in it.

    After reading the forums, I am pleased to see that my recovery disks will be reinstalling everything on a new hard drive and partition a C: drive and also the recovery partition. The main issue I have is my new drive hard must it be 320 GB in size as the original or to buy something like a disk 500 GB + for the laptop. If I have to replace the hard drive that I can as will increase size while, if possible i.e..

    It must also be a Toshiba or I can buy another brand?

    Eager to help regarding this I thank you in advance as

    Hello

    Your laptop is listed as coming with a 320 GB hard drive, but you can install just as easily a 500 GB or 750 GB HARD drive if you want more space - readers at the following links are examples that would be perfect for your laptop - you are in no way limited to a particular manufacturer.

    Hard drive 500 GB

    750 GB hard drive.

    The procedure to replace the hard drive begins on Page 65 of your & Maintenance Guide.

    Kind regards

    DP - K

  • Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

    I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

    All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

    Click Start, right click computer

    Click on properties

    Scroll down to the Windows Activation

    Click on the link change product key

    Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

    COA certificate of authenticity:

    http://www.Microsoft.com/howtotell/content.aspx?PG=COA

    ??

    What is the certificate of authenticity for Windows?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  • Windows 7 Home Premium loading of a new hard drive. Error 0 x 80070017, driver manager couldn't do.

    Windows 7 Home Premium loading of a new hard drive. Get error 0 x 80070017. Can not find the driver manager. How can I solve this problem and get Win 7 responsible?

    This is a new generation, the motherboard Intel DZ68DB Media Series for processor LGA1155 albums, office.

    I am a bit stuck!

    Check out this link

    http://search.Microsoft.com/en-us/results.aspx?q=0x80070017&x=11&y=8

    Good luck.

  • new hard drive for laptop

    I have a laptop dv7-3140el and HD samsung HM641JI 640GB 2.5 "SATA 5400 RPM (to replace car failure). To buy a new hard drive I have to take the same or I can take 7200 RPM instead of 5400? What technical specifications should I look for when buying a hard drive for computer laptop dv7-3140el? I wouldn't make a bad purchase!

    Sorry for my bad English

    Hello

    Here are a few points to note when replacing your HARD drive:

    You are not limited to any particular drive manufacturer.

    The speed of rotation of the disc can be 5400 RPM or 7200 RPM

    The new drive HARD should be at least the same capacity (or slightly more is okay) as the original drive - mounting a drive smaller than the original often causes risks with recovery media.

    The player at the link below is an example of one that would be perfect for your laptop.

    750 GB hard drive for laptop.

    If necessary, the procedure to replace the hard drive begins on Page 47 of your maintenance & Service Guide.

    Kind regards

    DP - K

  • HP TouchSmart 420 - 1000 t CTO: need help with the installation of windows on a new hard drive for HP TouchSmart 420-1000 t CTO (bought in 2012)

    My hard drive is failng in my computer I get the message that "the failure of hard drive" is imminent for several months now.  I did just recovery disks after I bought my computer and that you have ordered a new hard drive.

    I thought that the part of the setup of windows on a portion of the current hard disk that I need to replace.

    I want to just make sure that if I can restore the windows completely and that all programmes provided with the computer are on the recovery discs I want to do it myself - so I need to know I'm doing it correctly!

    Thank you very much.

    Kimberly

    PS I found this web page below and I want to just make sure that it applies to me:

    http://support.HP.com/us-en/product/HP-TouchSmart-420-1000-desktop-PC-series/5146292/model/5155758/d...

    This link in the post seems to apply to the situation.  If you have already completed the defined recovery disc then it should just be a matter of running the recovery disc after the new hard drive is installed.  The recovery disk set will be "restoring windows completely and all programs included with the computer".  Be aware that all other items that were installed or personal data will not be restored.  When replacing the hard drive, do not buy a disc exceeds the limit of 2 TB, such as published in the SPECS for TouchSmart 420-1000 t CTO.

  • 0xe0f00013 (new hard drive) retrieving error code

    Laptop model: HP envy 14 beats 1260se, windows 7 64 bit.

    OK, here's the story. A couple of weeks ago, I did a test drive and this error 'problem of intelligent control' came, and after spending some time on the internet, I discovered that I need to change my hard drive. I created a post as well, here is the link:http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/Smart-check-issue/m-p/2337229

    So now, I bought a new hard drive and the model is: 750Go momentus XT (link:http://www.amazon.co.uk/Seagate-750GB-Momentus-Serial-Hybrid/dp/B0068QO82G/ref=sr_1_1?ie=UTF8&qid=13... )

    I replaced my HD and so my recovery disks to reinstall windows and basically copy all the original files in the new HD. However, at the end of the restore process (7 discs), I received this error: "Recovery Manager could not restore your computer by using the original image. Please contact HP support. "Error code: 0xe0f00013.

    And then after I pressed 'Finish', he went on the screen of my laptop which basically a HP logo appears and it stops right there!

    I have no idea what to do now and it becomes really annoying!

    Thank you, Aria.

    Hi Aria,

    It seems that you bought a hybrid car and this is probably what causes the error when you try to use your initial recovery disks.

    Here is another solution, you can try which should allow you to load Windows 7 on your new HARD drive.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version that originally came with your laptop - IE Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is Here. These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • New hard drive for compaq presario c500 running vista. I want to switch to windows 7

    I'm fixing my laptop aunts. He a presario c500 compaq running windows vista. I bought a new hard drive. I would like to install windows 7. She could get windows 7 discs for free when she got off the computer, windows 7 was not yet. They have offered free windows 7 for people who bought the PC just before its release. Is it too late? I guess it's too late. Is there anyway I can get windows 7 for free? Or is there any discount for the upgrade to vista. I can't afford windows 7 discs.

    In my opinion, it's too late to get a free version or price reduced from Windows 7. This offer was available about two or three years, if my memory is good.

    You can Contact HP and ask.

    Best regards

    ERICO

  • HP Pavilion Dv7 - is anyway I could get new keys or new hard drive for her!

    Hi, I have a lot of problems with my old laptop as getting a new hard drive to it and new keys for her! If this isn't the case, I could throw! so please help me and get this resolved!

    Natalie

    Hello

    New HARD drive should not be a problem, but new keys for the software can be a headache. Depending on the software, you can always try to contact suppliers to get new keys and we HOPE they will help you.

    Kind regards.

  • New hard drive for XPS 15 (L501X)

    I need to replace my hard drive failed and did a little research for a new.

    I currently have a Seagate ST9500420AS which has a height of 9.5 mm and I think about him replacing a portable Seagate SSHD (ST500LM000) with a height of 7 mm. It is suitable for my computer and it is compatible? This is my first time looking for a new hard drive, so any advice is welcome.

    Thanks for reading!

    It must be installed.  You will have just a small gap at the top.  The holes should register where they need brackets etc.

Maybe you are looking for