new help file

Similar Questions

• How to upgrade the help files

  Hi team,

  I am trying to create a custom help file.

  In the tab Projects all under the Help Menu can I go and replace existing pdf documents downloads by custom help files? If so, then please let me know the steps.

  
  Kind regards

  Avinash

  This in the Setup of BP to BP in question.  So, if this BP lives in the shell of all projects, you can navigate to this shell and switch to Admin mode.  If it's in a project under this shell, you can navigate to that project and switch to administrator mode.  Then, go to settings > business process.  Open the desired BP and open the General configuration of BP. You should see a field help file on the general tab, delete the existing file and add a new file, as desired.

  This will add the file for this particular instance shell only, so if you want this to be the new help file for all instances of this shell, you can follow the procedure above for a shell model of that type, then update the shells.

  Sean

• Can I use WebHelp to export my complete help files?

  I completed my new help files using roboHelp 7.0.  They are export-ready.

  I have looked through the files of RoboHelp, but I'm not clear what I need to do to export.  There is a file called WebHelp, but it contains all the help files I've created?  Or should I put here?  If so, how?

  Thank you!

  Hello

  See if this video helps...

  Click here to see

  See you soon... Rick

• I have Lightroom 1.4.1 and I just started shooting the Nikon D700.  I can't Lightroom to read my new raw files, help...

  I have Lightroom 1.4.1 and I just started shooting the Nikon D700.  I can't Lightroom to read my new raw files, help...  Y at - it a plug-in or update I can get?  I can't afford new software after new camera and lens new!

  Lightroom 1.4.1 does not support native (NEF) files from the D700 because the camera didn't even exist when it was released. To get help, you have two options: upgrade to Lr 2.x (paid for the upgrade) or convert your NEF files to DNG.

  DNG 5.4 converter can be downloaded from http://www.adobe.com/downloads/ (see the right-hand side of the page)

• New save file every day

  Hi all

  It has been a bit since I posted something here, but here we are, back at it with LabVIEW. I have a (attached) VI that takes a few different continuous data sets of different modules, but I found that when the program is left running for long periods of an hour, say 2 weeks, the backup of files can become a little hectic. Under the "Update UI" State of the block diagram is a section called the "VAT data producer" who reads both given different values each second "temperature" and "flow". These two are then written to the same TDMS file as well as the date and time, where to save file is also noted by the hour and the date of this registration was launched. The question I have is that I wish I could change the record sequence for these data sets create a new backup file for each time that a new day begins while the program is running, opposed to just create one on the day it is started and then continuously adding to this, until the program is stopped potentially a few days or weeks later. Hoping for any help I can get because I was counting on the fight against this solution at some point this week * screaming inwardly *.

  Thank you in advance because I know you are all very helpful people! for newbies like me!

  Stephen.

  P.S. I added some images to hopefully better explain the issue with the source of series data comms and how the data are saved in the current date.

  I have a function that generates a name of file based on the date. Then use a shift register to hold the current result file, if they are different (new day) you close the current and open the new file and write in that one.

  /Y

• Not able to see the images in the Windows Vista Help file

  I use a Windows Vista operating system and I'm not able to view the images in the Windows Vista Help file... ! Here are the troubleshooting steps I tried to solve the problem:-

  1. I tried sfc/scannow and chkdski/f/r.
  2. Tried to clean boot.
  3. Tried to create a new user account.
  4. Tried in safe mode.
  5. Downloaded and installed the WinHlp32.exe file from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143
  6. Tried running the http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx SubinACL tool
  7. I tried Startup Repair tool.

  Could you please temme then what to do? I look forward to hearing from you soon.

  Hello
  Try this for this issue:
  Equip your Windows recovery disk, then select "Reinstall partial '.»
  Check the "Winhelp" since the consolidation of program.
  Next
  Finishing
  Then restart.
  Which solves the problem?
  hope this helps,
  b Eddie

• My hosts file has been corrupted, while I can't access certain sites like youtube or google etc, how do I replace a new hosts file?

  My hosts file has been corrupted, while I can't access certain sites like youtube or google etc, how do I replace a new hosts file?

  Hello

  The Hosts file and that it can do for you
  http://www.bleepingcomputer.com/tutorials/Tutorial51.html

  How to reset the default hosts file? -Mr Fixit methods and manual
  http://support.Microsoft.com/default.aspx/KB/972034

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When a right click to create a new folder, I can't see the new option 'file' in the menu. Why?

  I'm running Win 7 Ultimate and it happened on my system for the first time: when a right click to create a new folder, I can not see new option 'file' in the menu.
  I remember that I did not create new records from the last 5 days, so I can't say when the problem came. But I remember that yesterday I uninstalled 'free. '
  antivirus application which disappointed me a little. And it was the only action I suspect to have effect on my system.
  So I can't create folders in the usual way. And I need help to solve the problem. Moreover, the cmd command line works and when I type:
  MD x:\AA,
  The result is a folder named AA at the root of drive x:

  Again, I ask for help.
  Thank you
  Chris

  Hello

  Go to the following site.

  File Association fixes for Windows 7 - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/

  In the blue box, click on the item in folder and download the file to your desktop.

  Unzip the file.

  Double-click the folder_fix_w7.reg file to add the information in the registry.

  In the meantime, you can also use the keyboard shortcut to create a new folder.

  Just press Ctrl + Shift + N.

  Concerning

• Update for new Raw files? [How will support for the Canon 5 d Mark IV be available?]

  HY everybody

  a question - I just bought the new camera canon 5 d mark 4. the latest version of lightroom/photoshop is not able to read these files again. When will it be delivered an update to read the 'new' raw files normally after a release of the camera? within a cuple of days? weeks? month?

  concerning

  Fabian

  Hello world

  6.7 Lightroom and Lightroom CC (2015.7) are now available and it includes support for Canon EOS 5 d Mark IV.

  Please upgrade to the latest version of Lightroom to help > updates menu.

  Release notes:-Lightroom CC now available 2015.7

  Kind regards

  Assani

• Failed to create or open the new (existing) file

  I can't create or open the new (existing) file or new model is just do ' t do anything. I have to stop using the Task Manager.

  Microwoft WIndows 10 x 64 Insider Preview Build 14361, 6 GB RAM, Intel Core i3.

  I tried to restart my laptop, reinstall Illustrator, run as administrator, that it helped me. Adobe Illustrator CC 2015 19.0.0 (64-bit). I don't know what's happened, he worked several times before, but now... Help, please!

  Disable the GPU performance helped me, now I can open or create new files, but now my computer is incredibly slow opening Illustrator.

  P.S. Oh my... I just activate Windows Defender and now everything works normally

• Collect files vs just make a new ASP file

  I'm poking around for some advice. I'm a bit new to AE and trying to figure out the best workflow.

  I'm working on a series of short videos (I think there are 25 total) and trying to figure out how best to streamline the process.

  When I create a new video for the series, should I be collecting files and create in its own folder, or should I just create the new ASP file in the same root folder? I ask this question because there are many similar elements (effects, images, etc.) for each video.

  Thought through it, it seems to me, to keep you organized, I should be collecting the files and make each video its own entity. Because there is nothing cooler that rummage in 100 + PS or HAVE layers to find the titles/content that I need.

  I could have just answered my own question. Is there a reason to do something other than my course of action (collect, then do it again)? I imagine people putting together a TV series want to separate each project.

  Looks like you should use the command collect the files a lot.  Any chance of getting all the files needed in the same place or two before starting your AE work?  It helps a lot in the long run.

  If it is a series, there is a VERY good chance that you will use some files on & repeatedly: logos, animated graphics, you have.  I have these files myself, so all going in a folder named 'common Footage. "  As I find that I need additional files that will be used in the future, they will in this matter, too.  Then, for each new project, I do a folder containing the project file, a folder "Images" of the files used only in this project and a "Completed" folder to go return it.

  You might be able to get away with four folders: 'Commune Footage', 'Images' for things that are unique to each episode, 'Done' and a "Projects" folder that will contain the project files: "Episode 1", "Episode 2", etc.»»

• I just want to know how it happened to one of our producer/Editor. It is his story. "She hung the three hard drives to 9 from FCP, has opened the program from Premiere Pro and created a new project file. Then she dragged by season by show .mxf files in th

  I just want to know how it happened to one of our producer/Editor. It is his story. "She hung the three hard drives to 9 from FCP, has opened the program from Premiere Pro and created a new project file. Then she dragged the files, .mxf per season per show in the Premiere Pro project file. To organize additional files in labels and others per show per season, she decided to redo the project file. She highlighted the files on the window of Premiere Pro and click on delete. She then tried to repeat the move but this time, the program could not read the file type extension. One of our Publisher checked raw materials of the external hds but unfortunately the files is no longer there. Our question is how it happened because according to her, there is no prompt that it will be deleted in the external source files. Please help so that we can avoid it in the future. Hoipng for your immediate response. Thank you

  First does not remove the files. The option to delete files from the hard drive only appears when you perform offline files in the first project window.

  The editor is sure that she has deleted the files in the window of Premiere project and not on the hard drive itself?

  >>

  Better is not not to drag but to import or to ingest via Media Browser in the first.

  I'm guessing she files deleted from the hard drive.

• SQLEXEC on each new track file or simply on replicat begin to capture current FILESEQNO?

  Dear community,

  I need to capture fileseqno Treaty of the trail than replicate file. But I need to capture him once without overhead of adding column fileseqno to the target tables.

  I clearly understand that the use of colmap (usedefaults, FILESEQNO = @GETENV ('RECORD', 'FILESEQNO')) inserts the value of fileseqno for all records captured in newspapers, but what I want to accomplish is to react to the change number of fileseqno event while replicat is running.

  Logical extension of the application I have in fact just to capture the first trail, which is treated by replicat fileseqno.

  What I've tried so far is to use the following settings to replicate (given the two tables have to be replicated):

  table m.EventHead,
  sqlexec( id set_first_seq_no1, spname pk_replication_accounting.set_first_seq_no, params( a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@coltest( set_first_seq_no1.a_fileseqno, NULL ) or @coltest( set_first_seq_no1.a_fileseqno, MISSING ) or @coltest( set_first_seq_no1.a_fileseqno, INVALID ) ),
  eventactions( ignore record );
  table m.EventTail,
  sqlexec( id set_first_seq_no2, spname pk_replication_accounting.set_first_seq_no, params( a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@coltest( set_first_seq_no2.a_fileseqno, NULL ) or @coltest( set_first_seq_no2.a_fileseqno, MISSING ) or @coltest( set_first_seq_no2.a_fileseqno, INVALID ) ),
  eventactions( ignore record );
  
  

  pk_replication_accounting.set_first_seq_no is defined in the package as

  procedure set_first_seq_no( a_fileseqno in out pls_integer );
  
  

  With the filter clause, I tried to load GG for SQLEXEC only for the first record captured for each table, but without success. Stored procedure is shot several times on each record in the log file.

  As far I understand autonomous SQLEXEC is not able to get the value of @GETENV ("GGFILEHEADER", "FILESEQNO"), although I have not yet tried.

  Another way, what I see, is to instruct extract to add a record of false for each new track file and then to process within the card with SQLEXEC clause. For example, if SOURCEISTABLE had by effect of the table, then we could get our unique record for each trail using the double table:

  sourceistable
  table dual;
  
  

  I still don't know how to get the required behavior.

  Please help if you know workarounds.

  Has managed to capture the current fileseqno for each start to replicate with the following parameters:

  ignoreupdatebefores
  --
  map m.EventHead, target gg.tmp_gg_dummy, handlecollisions, colmap ( id = @GETENV ("RECORD", "FILERBA") )
  sqlexec( id set_first_seq_no1, spname pk_replication_accounting.set_first_seq_no, params(a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@getenv( "STATS", "TABLE", "GG.TMP_GG_DUMMY", "DML" ) = 0), insertallrecords;
  --
  map m.EventTail, target gg.tmp_gg_dummy, handlecollisions, colmap ( id = @GETENV ("RECORD", "FILERBA") )
  sqlexec( id set_first_seq_no2, spname pk_replication_accounting.set_first_seq_no, params(a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@getenv( "STATS", "TABLE", "GG.TMP_GG_DUMMY", "DML" ) = 0), insertallrecords;
  

  tmp_gg_dummy is defined as follows:

  create global temporary table gg.tmp_gg_dummy ( id number( 14, 0 ) ) on commit delete rows;
  
  alter table gg.tmp_gg_dummy add constraint tmp_gg_dummy_pk primary key ( id );
  /
  

  Procedure is triggered only once by each replicate early and report file displays the following text:

  From Table m.EventHead to GG.TMP_GG_DUMMY:
  
    Stored procedure set_first_seq_no1:
           attempts:         0
         successful:         0
  
  From Table m.EventTail to GG.TMP_GG_DUMMY:
         #                   inserts:         0
         #                   updates:         1
         #                   deletes:         0
         #                  discards:         0
  
    Stored procedure set_first_seq_no2:
           attempts:         1
         successful:         1
  

  Although mapping of origin of m.EventTail

  	#	Inserts:	69
  	#	updates:	21
  	#	before:	21
  	#	deletions:	0
  	#	Releases:	0

• DW help file is missing?

  When I click on 'Help' in DWCS6, it tells me that the aid system cannot be launched because the help file is missing. Then "Please install the help file or reinstall Dreamweaver. Before I could view the online help, now it disappeared. Is this another example of improvements CC, designed to make life as difficult as possible for all those who want not to subscribe to the new meal ticket to Adobe?

  Either way, I see that I'm done with a creative application of cloud on my desk W8, apparently installed at her backdoor when I checked for CS6 updated and a new version of Adobe Update Manager has been installed.

  Back to the question: is it still possible to download a copy of the help file, without going to the penalty to uninstall and reinstall DWCS6? This kind of thing can create more problems than it solves, based on past experience.

  Hello

  I don't know how it's happened, but in my help Manager Adobe, General settings-, it has been set to display the contents of local help only. So, it wouldn't let me view the content online . By changing the settings to allow content online, I was able to download a .pdf of the help manual. Further, I'll let Manager to help set up this way for future updates. It was the first time I used the help of the community - I am very grateful for your quick responses - thanks to you two.

  Concerning

• new unseen files on the shared disk (rise of 2 VM Debian)

  Hello community,

  I'm quite new to VMware ESXi 3.5 and I can't find a solution for my environment, although I already read a lot of threads here and looked for other sources of help.

  I run 2 VMS Linux Debian and want to share my MP3 disc. The shared_mp3.vmdk was created with the 'thick' option and can be fixed on two VMS with success.

  If Debian VM #1 creates new files to the disc MP3, they are not visible to VM Debian #2.

  The only solution inside the VM Debian #2 is to umount SCSI 1:0, wait a few seconds and then raise it again. Of course, stop VM Debian #2 of the VI client and it starts again, makes the visible files, but both solutions are not a solution for this problem.

  Can anyone provide assistance?

  Do I need to install the software of protocoll sharing SCSI-2?

  Thank you in advance for your help!

  Here's my detailed environment:

  VMware ESXi 3.5 U4 with 2 VM Debian on the same physical host:

  VM Debian #1:

  'big' server that processes for example the new MP3 files and converts them to lower bit rates (e.g. for my iPod)

  Located within a green network behind a firewall with a write access to the MP3 disc.

  LSI Logic SCSI controller 0 with root disk (SCSI Bus sharing: None, debian1.vmdk located on the local storage as SCSI 0:0)

  LSI Logic SCSI 1 controller with MP3 disc (shared SCSI Bus: virtual, shared_mp3.vmdk is independent/persistent and located on local)

  storage as SCSI 1:0)

  (shared_mp3.vmdk has been created with the "thick" option)

  SCSI1.sharedBus = "virtual".

  Disk.Locking = "false".

  VM Debian #2:

  UPnP streaming server

  Located inside a red network with read access only on the MP3 disc. Debian Linux get the MP3 drive read-only.

  LSI Logic SCSI controller 0 with root disk (SCSI Bus sharing: None, debian2.vmdk located on the local storage as SCSI 0:0)

  LSI Logic SCSI 1 controller with MP3 disc (shared SCSI Bus: virtual, shared_mp3.vmdk is independent/persistent and located on local)

  storage as SCSI 1:0)

  SCSI1.sharedBus = "virtual".

  Disk.Locking = "false".

  iSCSI would push you in the same boat that the shared disk.  Two are block-level and will need you to have some sort of awareness of the bunch to them.  If you have only an ESXi host, you can create an internal network only for the two to speak to GFS or OCFS2 vm.  If you have more than one ESXI host, then you can consider a cross-over for both servers, or even a hub/switch only for the private network. You can run GFS on the same network as the usual traffic, it is not "necessary" to have a private network, comes to recommend, and it's only for server coummunication between them.  You need to open ports so that it goes to your vm.

  -KjB

  VMware vExpert