New line number in text file in Notepad open

Similar Questions

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• Add data at the end of a specific line in the text file

  Hello

  I'm trying to add data at the end of the last 4 lines of the text file attached with the ' table to add.  4 rows (422.5800 entry), I would add the first entry of the 'Array to add' entry, on the 5th line to add the second entry of the 'Add picture' and so on.  How can I do this?

  Any help will be appreciated.

  Sincerely,.

  hiNi.

  After re-reading your post, I think that's what you really want to start adding after the first 4 rows.

• Speech to the new line number or paragraph text

  If I use my speech to text on Evernote function to type part of my notes from class. When I use commands like a new paragraph or new line happens. I don't have a say "What is new subsection of Psychology question mark" and this was the result.

  .

  This next picture has been with the same exact sentence but with 'new line' instead of 'new paragraph '.

  

  Any contributions to this number you would know I have a lot of notes to be inserted and id do not have to talk like one huge paragraph and cross and insert my spaces.

  * Update * I downloaded improved dictation and looks like it has solved the problem.

• Problem with end of line in the text file.

  Using LabVIEW 2010 on W7 64 bit in the USA.

  I have an application in which I write in a text file.  I use the function "Write to a text file" to write the text and "Reading a text file" function to read again.  My problem is with the end of line character.  The text that I write is a long chain, not an array of strings.  While building this chain, I insert the constant EOL of the palette of channels function to indicate that a new line is planned.  My tests showed this EOL constant values of consecutive bytes 13 and 10.  After writing all the text in a file, I can open the file with Notepad, or Word, or something else, and it is displayed correctly.  When I read he returned with the function of text file reading, I'm trying to parse the string by searching for the same constant EOL, but it does not work.  A closer examination of the extracted string from the file reveals that the value of end of LIFE has changed for only 10.  The location of the byte to 13 disappeared.  I know there is a note on the writing of the function of text file add/change the EOL characters, which are the default values of the system, but the note specific tables.  I manually put the value in the string.  Does anyone know why this happens and how to fix it?

  Thank you.

  The help of reading from text file function

  The function converts all characters in end of line break characters online platform, dependent unless you right-click the function and remove the check mark next to the menu item Convert EOL .

  Right-click your reading and uncheck the EOL conversion.  I recommend to do the same thing to your writing to text file feature.

• New line characters in the file writing

  I use the following function to write text in the file

  public void DebugLog (String strTxt)
  {
  System.Err.println (strTxt);
  System.Err.println("\r\n");
     
  Try
  {
  String iFileName = "file:///SDCard/BlackBerry/pictures/Debug.log";
  FileConnection fileConn = (FileConnection) Connector.open (iFileName, Connector.READ_WRITE);
  If (fileConn! = null)
  {
  If (! fileConn.Exists ())
  fileConn.create ();
                 
  OutputStream os = fileConn.openOutputStream (fileConn.fileSize ());
  DataOutputStream back = new DataOutputStream (os);
  dos.writeChars (strTxt);
  back. Close();
  fileConn.close ();
  }
  }
  catch (Exception ex)
  {
  }
  }

  The function above very well written text to file. But when the txt contains \r\n which is not reflected in the line break in the file. He appears just as \r\n in the file.

  What changes I need to make sure that the line break is refrlected correctly in the file. I need to convert any other sequence of bytes using a Unicode conversion, \r\n

  try to use

  dos.writeUTF

• Use the lines of a text file as input to an SQL command

  Hello

  I have a text file containing the lines...

  123

  1234

  I would like to use as input for a SQL command running in a script. ie

  Update flag set < table > = 'Y' where job = < the text file lines >;

  Any help much appreciated.

  See you soon

  External table will do.

  For reference...

  CREATE TABLE Hold'em (SEQ_NUM NUMBER (10));

  insertion in hold select SEQ_NUM in task where proc like '% PROC;

  update set hold_flag = task ' ' where in SEQ_NUM (select hold SEQ_NUM);

• How to open a text file with Notepad to labview vi?

  Hello

  How can I run a program of a vi?

  I want to open a text file with Windows7-block-notes after a file-path-control selelecting and pressing a button.

  Thx for the help

  Another option is the URL opened in VI of default browser located in the HUD assistance. If you use the path to the string function, you can feed the result as a URL, and the Windows shell knows the default program-oriented, which is Notepad.

  Edit-

  

• How to find the largest number of text file

  I use the "Read from the text file" block to read the data in my .txt file in labview.  It is now in the string format.  I have a lot of numbers in the file.

  For example:

  0.45

  0.35

  0.12

  1,354

  1.56

  2.89

  5.89

  0.56

  That's what might look like a text file.  I want to find out which of these numbers is larger and do calculations with this number.  I have problems with channels/number/berries formats, etc.  Thank you

  Try to read that the file with File.vi reading worksheet with transposes the True value. Then use the table Max & Min to get the biggest number in the table.

  Lynn

• BlackBerry Q5 RE: PRESSING ENTER the PASS KEY to a NEW LINE instead of TEXT SEND MESSAGE to Q5

  I would rather use the Enter key to move to a new line to send the message. I've used it on curve 9300 and I'm frustrated just now, I cannot understand how to move to the next line on the Q5. I thought that the Q5 will be an improvement over the curve. I'll be disappointed if it is not possible on this subject. Can anyone help please?

  Hi curio

  In Blackberry Hub, tap on three points at the bottom right > setting > text > use touch send > OFF. It will make a new line, if you press on enter key.

• Reading single line of the text file

  I use the following code to read a .txt file

  private String readTextFile (String fName) {}
  String result = null;
  FileConnection fconn = null;
  DataInputStream is = null;
  try {}
  fconn = (FileConnection) Connector.open (fName, Connector.READ);
  is = fconn.openDataInputStream ();
  Byte [] = IOUtilities.streamToBytes (is) data;
  result = new String (data);
  } catch (IOException e) {}
  System.out.println (e.getMessage ());
  } {Finally
  try {}
  If (null! = is)

  is. Close();
  If (null! = fconn)
  fconn. Close();
  } catch (IOException e) {}
  System.out.println (e.getMessage ());
  }
  }
  return the result;
  }

  I want to print a single line instead of the file around so I read that I need to store the contents of the file into an array and then get the index of the line. Problem is that I couldn't find any information on how to do it. Can someone give me a shot. Thanks in advance.

  This isn't a problem with encoding. You just need to do a little extra accounting and adjust start and end indices to remove these characters. To treat the "\r\n" of line termination style, you can maintain a flag (initially false) to indicate that the previous line ended with a \r; If a line begins with \n, it should be treated as the end of a line (empty) if the flag is true (in which case it should be ignored).

  If you want to extract all lines (not just the first), then it may be easier to do this accounting while avoiding a separate function. Something like this (untested):

  // read the file into a byte array 'data'; then:
  Vector lines = new Vector();
  boolean endCR = false;
  int start = 0;
  for (i = start; i < data.length; ++i) {
    if (data[i] = 0xD) {
      lines.addElement(new String(data, start, i - start));
      endCR = true;
      start = i + 1;
    } else if (data[i] = 0xA) {
      if (endCR && i == start) {
        start++;
        endCR = false;
      } else {
        lines.addElement(new String(data, start, i - start));
        start = i + 1;
      }
      endCR = false;
    }
  }
  String[] results = new String[lines.size()];
  lines.copyInto(results);
  

• How to put a new line in the text block using jsx?

  Hello guys,.

  I am concatenating the content of the text block using two JSX, but I want separator as a new line. I have tried \n but does not work please help how to do that.

  var  seperator = "\n" 
  frame1.textItem.contents + seperator + text;
  

  Hi UpendraSengarr,

  Try this:

  var frame1 = app.activeDocument.activeLayer;
  var  seperator = "\r";
  frame1.textItem.contents = frame1.textItem.contents + seperator + "text";
  

  Have fun

• New line with bug text tool

  So I opened my Photoshop recently and everything seems to work fine, but I went to add text to one of my pictures and when I hit enter to add a new line, it is just more polished himself.  I'll provide a gif I mean if you don't quite understand.  But I tried Googling my problem, and can't find anything at all to help so I thought that my last option is to ask the community.

  Gyazo - c9fccbd68c9321bf31b2a29b3b77f2cb.gif
  

  The gif ^ ^

  and it's not just at the time where I hit enter it occurs also when I go to the limit of the text box, it ceases to reset and I do not understand.

  Change automatic spacing or a reasonable value instead of zero.

• anchor in the property tags htmltext of a TextField causes of new lines in the text?

  Hi all

  I have a few HTML loaded from an XML document which includes web links (anchor tags).  I use a TextField to display the text and am connect the XML data in the htmlText of a TextField property and renders the text with HTML tags, links work etc.

  The problem I see, is that a new line is created before and after the link, so html like this:

  Hello World < a href = "#" > This is a < /a > link and all this must be on the same line.

  is made like this (with particular attention to the new lines):

  Hello world

  This is a link

  and all this must be on the same line.

  Does anyone know how to avoid these new lines appear when using HTML links in a TextField?  Any help is greatly appreciated.

  Your HTML tags are being analysed in XML format, and new formatting applied. To avoid this, place a CDATA tag around your HTML code. Previously your XML could be something like this:

  
       hello world this is a link
  
  

  Change this to look more like this:

  
       this is a link]]>
  
  

• Other new lines in SQL script file and problem with SQL * more

  Hi all
  
  
  I would like to ask a question on the characters of new line inside files SQL scripts. I have a very long SQL query, stored in a file txt (ANSI encoding). Because query instructions are very long (several table joins and WHERE conditions) tried to separate, WHERE and ORDER BY clauses by inserting several new characters of lines (just hit the entrance) among them in order to improve the clarity of the source code. Now the problem is, whenever these newline characters are inserted in the file, apparently SQL * Plus cannot parse the file properly and gives me the following error message:
  

  SP2-0042: unknown command "FROM" - rest of line ignored.
  SP2-0734: unknown command beginning "myenterpri..." - rest of line ignored.

  The problem is definitely related to these new line because characters that when I remove them, the scripts runs without any problem. I would appreciate that you could kindly guide me how should I deal with this problem. Is there any SQL * Plus command to run to correctly interpret the new line characters?
  
  
  Thanks in advance,
  
  
  Kind regards
  Dariyoosh

  Hello

  In [SQL * Plus 9 | http://download.oracle.com/docs/cd/B10501_01/server.920/a90842/ch13.htm#1013073] (and), you can tell

  SET     SQLBLANKLINES   ON
  

  allow to completely empty rows in an SQL statement.