anchor in the property tags htmltext of a TextField causes of new lines in the text?

Similar Questions

• BlackBerry Q5 RE: PRESSING ENTER the PASS KEY to a NEW LINE instead of TEXT SEND MESSAGE to Q5

  I would rather use the Enter key to move to a new line to send the message. I've used it on curve 9300 and I'm frustrated just now, I cannot understand how to move to the next line on the Q5. I thought that the Q5 will be an improvement over the curve. I'll be disappointed if it is not possible on this subject. Can anyone help please?

  Hi curio

  In Blackberry Hub, tap on three points at the bottom right > setting > text > use touch send > OFF. It will make a new line, if you press on enter key.

• How to copy/paste the text box anchor to its anchor text and remove all checkpoints empty?

  Hi all

  I have a document of a few pages, but a story. The right column is the area of main text and on many places, anchored text boxes are placed which appears on the left column, as shown below.

  I want the text of each text box anchor to cut of his place and sticking to its point of insertion/anchor and remove all of the empty boxes of anchored.

  I'm trying since this morning but I was able to get the anchor object reference. Any help on how to start with will be useful.

  Marie rosine

  

  OK, let's say you have a main text (not rooted) box and three text boxes that are anchored to the text it contains. One is anchored with text, the second is not anchored and the third argument is empty (I won't get into the anchor vs custom anchor line given that you mention in your message).

  Scroll us through the items on the page:

  function main(){
    var myDoc = app.activeDocument;
    var myPages = myDoc.pages.everyItem().getElements();
    for (var i = 0; i < myPages.length; i++){
    {
      var myPage = myPages[i];
      //Checks that the page is valid, and that it is not a master page. If either is true, skips to the next page.
      if (myPage.isValid == false) continue;
      if (myPage.parent instanceof MasterSpread) continue;
      var myItems = myPage.allPageItems;
      for (var j = 0; j < myItems.length; j++){
        //Current item.
        var myItem = myItems[j];
        //If myItem doesn't have a Character parent, it is not anchored.
        //The first and third text frames would fail this test.
        if (!(myItem.parent instanceof Character)) continue;
        //We only care about text frames.
        if (!(myItem instanceof TextFrame)) continue;
        //I think the only way this would happen would be if you had an image or
        //something else unexpected within the frame. I check for it so no content
        //is inadvertently lost.
        else if (myItem.texts.length > 1) continue;
        //If we're still in this iteration of the loop, all qualifications are met.
        //Flatten the text frame.
        //I don't use layers that often so, to me, flatten makes sense. You may want
        //to use a different term if there's a chance for confusion.
        flattenItem(myItem);
       }
     }
  }
  
  function flattenItem(funcItem)
  {
       //Hold onto the anchor character.
      var myParent = funcItem.parent;
       //Duplicate the text from within the frame so that it appears right after the anchor.
       //There may be other methods, but this works for me. I try to avoid copy/paste
       //so as not to deal with any clipboard mishaps. I added a check in case of empties.
       if (funcItem.texts.length > 0){funcItem.texts[0].duplicate(LocationOptions.AFTER, myParent.insertionPoints[0]);}
       //Replace the anchor character itself with a space (or whatever) which also
       //deletes the text frame it was anchoring.
      myParent.contents = " ";
  }
  

  I guess the takeaway is perhaps you aren't looking at the main text block and then check if anything it is anchored. You are watching each text block and find out if it is anchored. That's my approach, anyway.

• Y at - it no way to force the breeze line in the body of the text SystemDialog...

  According to the title

  No way to force line breaks in the text SystemDialog?

  I've tried \n in the text + the \n gets simply displayed.

  Which seem to be able to put break tags in the text - the destroyer of momnetics language file resources do not like tags.

  Thanks for the tip!

  What seems to happen is

  (i) If you pass the setBody() method a string literal - as in setBody ("line1 line2 \n"), everything's fine

  (II) from prev poster, if you set the text via a QML the \n file is processed properly (not verified, but think prev poster)

  HOWEVER

  If you load the text of a TS file, as in setBody (QApplication::translate ("", "string reference")); and the string in the TS file contains characters \n - the new line does not - the '-' and ' no characters are displayed instead. This is despite the procecssing of TS files

  To have line breaks in TS file using the
  coding (instead of the \n)

  Note. The TS file mangler will pronounce mangle your file TS containing the
  and replace with the new actual line in the xml text - then perhaps that is replacing soln - in other words a new line in your text. But relying on somewhat dubious text file formatting xml seems unreasonable...

  We opted for an approach of argNum % and used a QString.arg)

  For example

  LineOne % 1LineTwo

  and used a String str = tsFileString.arg (QString ("\n"));

  as we already use the QString.arg () on this particular string even when.

• White bands print in the text document?

  Photosmart 5514 - print (black) text has horizontal bands of empty regularly spaced (1/4 inch apart) in the text on an entire page - replaced the cartridges and realigned but still having the blank tapes anchored in the text

  There is a document to help resolve these types of issues print quality are here.

  I hope this helps.

• Go to the new line when you press shift + enter in the text box

  Hi, I would like to know how to go on a new line in a text box when you press a combination of keys SHIFT + ENTER. (Pressing himself enter causes the text to be erased and expelled for an ObservableList). Here is what I tried:
  

   text.setOnKeyReleased(new EventHandler<KeyEvent>() {
          final KeyCombination comb1 = new KeyCodeCombination(KeyCode.ENTER, KeyCombination.SHIFT_DOWN);
          final KeyCombination comb2 = new KeyCodeCombination(KeyCode.ENTER);
  
           public void handle(KeyEvent t) {
                  if (comb2.match(t) && !comb1.match(t)) {
                          obs.addAll(text.getText());
                          text.clear();
          }
      }
  }); 

  I'm not aware of any explicit function which allows the accent circumflex positions itself a new line.

  Hello. Please, try the following:

         final TextArea ta = new TextArea();
         ta.addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler() {
  
              public void handle(KeyEvent event) {
                  if (event.isShiftDown() & (event.getCode() == KeyCode.ENTER)) {
  
                          ta.setText(ta.getText() + "\n");
                          ta.end();
  
                      }
                  else event.consume(); 
  
              }
          });
  

• Anchor on the validation tag fails.

  Hello
  
  I have a request that I need to set the destination of the anchor when the validation fails. I tried an unconditional to URL as branch
  
  f? p = & APP_ID.: & APP_PAGE_ID.: & SESSION. : #& P2_ANCHOR_POS.
  
  I put the P2_ANCHOR_POS hidden in the validation iten. However branch points do not work unless validations pass then how can I order the screen to move to the desired position?
  
  Thank you
  
  Graham.

  Hello Graham,

  Page processing stops if a validation fails. You will need create your own validation process. What you need to do is:

  1 remove the Validation

  2. create a process Page that makes your validation and sets the value of P2_ANCHOR_POS if the validation fails. If the validation is successful, the value of P2_ANCHOR_POS with a NULL value.

  3. set the condition of your branch to be P2_ANCHOR_POS is NOT NULL

  Good luck
  Don.

  You can reward this answer by marking as being useful or correct :)

• Navto #anchors to the HTML Articles?

  It is possible to navigate to anchors in the articles based on an order of navto HTML?

  For example: in a given article, I can use

  < a href = "navto://introduction" > link < /a > Intro

  to navigate to the Article Introduction in my Mobile of the MEA project.

  However, if I want to skip a segment given in this article, you would think
  < a href = "navto://introduction#anchor" > Intro - anchor link < /a >

  jump successfully to the #anchor tag in the Article Intro. But this doesn't seem to work. Can someone clarify that FIS / #anchor links do not work in the navto command?

  Thank you

  Tommy Aquino

  Bates Creative

  I determined that the unsuccessful nature of the binding of #anchor was unique to article that I deal with. The binding as described in my previous post seems to work fine under normal circumstances. Thank you!

• Find the text and apply the format paragraph tag in Framemaker 11

  Help!

  I am trying to automate the search text in a file FM11 and CE marking with a specific paragraph tag. Once it is, I want to be able to search for the same string again and delete it. The research will include wildcard characters. I'm moving Word files on and bring with manual numbering of paragraphs. Thus, when they arrive, they "2.3.4.5" before paragraphs for example. I want to search all of the numbers at the beginning of paragraphs, tag all those with the appropriate para format (starting a catalog) and then remove the manual numbering.

  At this time do us it manually, using find/replace and by using wildcard search strings to find (such as '\P[1-9]*.*.*.*[0-9]', which will find all the para numbering at the beginning of a paragraph 4-digit), then using the change option to paste to paste in a paragraph of the catalog tag. Then we repeat the same search and delete the text, leaving only the tag para to the number format. It works very well, but errors can occur if the search string in set incorrectly or if the numbers are not deleted (in this case, it is found on the next search and re-labeled incorrectly). For example

  I work for the Air Force collection of entries from the field and creating publications out of them, so there is no mobile profit here, just trying to be efficient. Any help is greatly appreciated!

  Thanks in advance

  b

  Hi Brian,.

  I guess right here because I've never done this before, but... In my view, there is definitely something wrong with your mission to find the property values. The way you wrote, you are trying to assign two properties to a single table space. That's why you need to remove these two lines to make him find work, because they are replacing the FindText property apparently. Here is my proposal for how it should be:

  findParams = AllocatePropVals (2);

  findParams [0].propIdent.num = Constants.FS_FindText;

  findParams [0].propVal.valType = Constants.FT_String;

  findParams [0].propVal.sval = searchString.

  findParams [1].propIdent.num = Constants.FS_FindCustomizationFlags;

  findParams [1].propVal.valType = Constants.FT_Integer;

  findParams [1].propVal.ival = Constants.FF_FIND_USE_WILDCARDS;

  In any case, let me point out again once it is a hypothesis and I did not test this. I am sure, however, that the solution is somewhere along this path.

  Russ

• Drop-down menu used with anchor on the long table of data links

  Hello

  I have a page on our site where we used a drop shape with anchor tags to let the visitor easy access to specific locations within a long table of data on the same page. Recently, I noticed that the anchors are walking around is no longer the tags in the page but only the beginning of the table anyway. I don't know if over time a few additional codes may have been added to the page that is not in conflict with the form of drop down menu, or if it's something else. I've been agonizing about this for awhile now and unable to fix. I'm hoping a new set of eyes will revisit the issue. the url is http://www.vectron.com/products/saw/saw.htm

  Thank you

  Looks like there are a good number of errors html on this page, some of them have to do with using the code of the named anchor.

  Looks like you have placed the anchors between the openingand the child of the opening. Content cannot go there, move them in theTags and see if that helps.

  It could be something else however, html errors are one of the main causes of the problems of display/functionality. Visit the validator to http://validator.w3.org to clean up your errors. If you work with the code clean and correctly positioned anchors, after return and we can take a closer look.

• Cursor when you move the text with a tag of behavior: how to change?

  Hi people, I created a tag of behavior to open a new browser window when you click on a text link. I also created a css style and adds a property flight hover/hand I've read in this forum, but hovering over the text does not cause the mouse cursor change.

  This is the http://arrowmark.co.nz/clients.html page and the text in red is the question.

  By clicking on "our locations" opens the window of the browser. I applied to the class "linkless_link" to this text which, in turn, has the "stationary" attribute applied to it, but as you can see the cursor does not change by positioning the mouse on it.

  Is anyone able to help me code it correctly?

  As well as this question, each time I have create a new page template or edit a page on the site I have to re - attach the css file, so the style sheet than the menu bar css. I would be grateful if someone could tell me what I did wrong to cause this, as all the other models I use keeps its css files associated with them at all times.

  Thanks in advance for the advice,

  JO

  Your style rule looks like this:

  .linkless_link p: hover {}

  Cursor: hand;

  }

  There are at least two errors in there. The correct value for the slider is 'pointer' ('hand' is the old, incorrect version used by older versions of Internet Explorer). Also, there should be no space before the: hover pseudo-class. Another possible error is the use of a descendant selector. I can't find the class of linkless_link applied to any element on your page, but p .linkless_link looks for a child of a paragraph element, so that it would work if you apply to your or the element, but not to the paragraph. In fact, because you're using a class, you need not p initially.

  Change the rule for this:

  {.linkless_link:hover}

  cursor: pointer;

  }

  And apply the class to the text that you want to assign.

• Tag HTMLText FONT does not work

  Hi guys,.

  I'm shooting a question that does not have the tag ARE in my project. Let me describe what I need:

  1. I need to put the different font in a dynamic textfield unique style. For example, the text is: "Welcome, Fred" and I want Fred to be bold and use "Vernada" as his police while others are left in 'Arial '.

  2. I use htmltext and embeded fonts here, strings are loaded from external xml files

  3. I found in the doc help make the tag could do. So I put the embeded "Arial" for the dynamic textfield fonts and add < FONT FACE = "Vernada" > Fred < / DO > in the XML files, but it will not show "Fred" to all the

  4. of course, I added the two "Arial" and 'Vernada' in the library.

  5. the problem is when I change the embeded fonts in "Vernada" for the dynamic textfield and modify the XML as < FONT FACE = "Vernada" SIZE = "25" > Fred < / MAKE >, it works this time. I mean the size of the character changed to 25.

  6. my conclusion is that the police tag only works when its font family of his textfild is like that you want to set.

  Is this correct? I don't think Adobe will design it like that? I missed something?

  I can't say a large part of these screenshots, except that you do the right things.  but because you are using a font Chinese Flash and not in this forum I do not see that your face attribute is the name of the font family.

• Position fixed DIV strangeness and anchor in the HTML stack

  Hello

  Im hoping someone can help me here.

  In short - I've implemented a pile of HTML/CSS. On the page, I have a couple of position: fixed; < div > s. From iOS5, they are supposed to work in mobile Safari and actually work in DPS (I tested).

  Inside the fixed position div, I have a hypertext link to an anchor at the top of the page. When loading the page, the link works. If I scroll the page, the link no longer works. Here's the weird part. As mentioned, after I scroll the link does not work, but if I type where the link is on the loading of the page, it works.

  Any ideas?

  DW

  Position: fixed DIVs are supported in iOS5, they are a known DPS bug. They position and remain fixed, but interactive elements (hyperlinks, for example) do not work in these div tags

  DW.

  To clarify - this is the case in a pile of HTML. It seems to work well enough in a superposition of Web (with the exception of weird double - tap for its work.)

• Anchors in the message are forced to open in a web browser

  In Thunderbird 31, when I click on a link in a message that points to an anchor within the same message (e.g. imap://[email protected]:143/fetch%3EUID%3E.INBOX%3E55326#1), it appears open a Firefox window to open the message instead of scroll the message at anchor pane. It's used to work properly in previous versions.

  Am I missing a setting somewhere, it of a bug, or is this the new normal?

  Thank you
  -James

  It's probably the Bug 974857 - anchor of the links works not when reading HTML emails (involving IMAP)

• Update the text of the label on a XControl via a property

  Hi all

  I write various programs to help with the debugging of embedded systems. I often need to convert a value to byte into pieces and then show which of these bits are true/false. This is easily done by using the convert-bool-Bay VI. However, I would like to create a control that will allow me to display a name for each field of bits - a bit like the way records are described in the data sheets. The control must be a bunch of buttons, and then I can show the bits are true/false, and use the label of the button to hold the name of bit field.

  I went from one way to the creation of this feature in an XControl as this seemed the best. My group of updates to Boolean values correctly according to the value of byte brought into control. However, I use a property to set the Boolean control label text (names of bit fields). My debugging shows that the text is assigned to the label of the control, but the control panel never changes. I tried synchronous updates, and by forcing a new drawing of the Panel using DeferPanelUpdates does not.

  I would be grateful for any help on this - VI and XControl demonstrating the issue is attached.

  Thank you

  Ray

  Probably, because you try to change the text of the label.  Try to change the text of the legend...

  For each boolean, choose "visible elements of legends '...