new nvidia graphics card and monitor driver choice?

Similar Questions

• I can't find a compatible Nvidia graphics card and monitor system of the body/Neo3D 3D

  Adobe first Pro CS5.5 / specification tecniques (http://www.adobe.com/products/premiere/tech-specs.html) lists the graphics cards that can be used to accelerate video editing.  I want to set up a system similar to what Dave Helmly is described (http://www.youtube.com/watch?v=Aqi_qivG82c) with a computer 3D monitor and 3D TV secondary screen.  However, the 3D monitors that I saw as an Asus (http://usa.asus.com/Display/LCD_Monitors/VG236H/#overview) indicate graphics cards Nvidia that no overlap with those specified on the website of the organization.  Also, I found no towers locally that come with an appropriate Nvidia card.  I found some that have a free PCIe slot.  I need two cards in any case; However, the graphics card that comes with some of these machines specifies a maximum resolution of 2560 x 1600.

  Here are my questions:
  (1) what Nvidia graphics cards are both supported by the Organization and support of 3D monitors?  I'm looking on the bad feedback?  The Alienware site does not specify which graphics cards are compatible.
  (2) if the integrated video card has a maximum resolution of 2560 x 1600, does mean that if I want resolution 1920 x 1080 for each of the two eyes I need format (output HDMI to 3D TV) alternate-frame sequencing?

  I have not bought equipment yet, I am looking for options that work.  Thanks for your help.

  Hi Dennis, you need one of the Quadro graphics cards to do what you want (use the Nvidia 3D output). GTX cards will be released to a secondary 3D display, but only side by side and more to the title. I have a GTX 480 which I use with the body and Neo, main monitor is 2560 x 1600 (non - 3D), my secondary monitor is a Sony 32 "3D TV on which I discovered 3D since the timeline and FirstLight mode side by side. To be honest, I change and cut in 2d mode and really only use the monitor 3d for the color calibration (which is different for 3D 2D because of the need to reduce areas of contrast high which cause ghost images) and for the z depth of positioning for the composition and titles.

• HP pavilion p6 - in 2356: white screen on the modernization of new NVIDIA graphics card

  I have a hp pc model no p6 product - 2356 in no #ACJ H3W39AA with windows 8.1 update installed on the computer.

  There already is an entry level graphics card NVIDIA geforce 620 installed in the computer as part of the specifications. However, I wanted to update my graphics due to the requirements of game and move on to an advanced version of the nvidia gtx 650 zotak. on the change of the card in the slot of graphics card I have tried to install the same but there was only a blank screen in the monitor.

  Desperately, I wanted graphics card to run on the computer, but could not do the work despite repeated attempts.

  I would really appreciate if someone can provide me with a solution to this problem.

  Hello again @Sauber91,

  The card mother and graphics card seems to be compatible I don't see why it wouldn't work.

  Thanks for posting on the HP Forums. Have a great day!

• What is a NVIDIA graphics card and why my After Effects requires one?

  This is my first time to use After Effects and I don't know anything about. I opened it and something pops up saying 'Ray-tracing on GPUS requires a NVIDIA and CUDA 5.0 or later approved graphics card'. What it means? I'm worried create anything on after effects incase it cannot record because of this problem.

  Your graphics card can't do ray traced 3D, so (ray traced 3D) it will be not very usable with large 3D scenes. Not a problem really unless what you AE for. You can still use the program. It's just a warning your graphics card does not minimum requirements for "ray 3D" features drawn, although it will still work, the CPU can do it too, but the classic rendering engine is generally fine for 3D in AE

• Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the old dr

  I asked a question here before and got a response, so I'm back. Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the older driver

  I couldn't on the forum last night! And today too busy...

  I think that a reinstallation is the only solution for the preset errors prober TEA that has been reported. Activation etc problems can be problems, if you have a subscription to the CC, try all the options to sign out/in on the cloud first Office.

• This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  I tried to connect a new TV to my 8700 with HDMI and I get this message:

  This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  1. power off the computer
  2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
  3. turn on the computer

  I unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.

  I tried to find a solution to this already, but none really helped.

  Thank you.

  You need a video card, not the port on your computer HDMI connection:

  

• HP650 NEW GRAPHICS CARD, CANNOT FIND DRIVER

  Hello

  UNCLE HP650 HAD WHITE SCREEN AND HE TOOK IT TO A STORE TO GET FIXED. TOLD HER THAT IT WAS THE GRAPHICS CARD, AND THAT THEY HAD REPLACED. THEY ALSO SAID THAT HE NEEDED NEW HARD DRIVE.

  HE GAVE ME HP650 AND I REPLACED HARD DRIVE WITH ONE OF HIS OTHER LAPTOP ACER THAT WAS NOT WORKING.

  HIS ACER HAD WINDOWS 7 TOP SO IT IS WHAT CAME AT THE START. I MANAGED TO FIND A FEW PILOTS WHO HAD DISAPPEARED, EXCEPT FOR ONE.

  I CAN'T GET A DRIVER FOR GRAPHICS CARD. I TRIED THE DIVERS WE HP FOR HP 650 AND HE SAID "COMPUTER DOES NOT HAVE THE MINIMUM REQUIREMENTS FOR INSTALLING THE SOFTWARE. I ALSO HAD THE DEVICE MANAGER GRAPHICS CARDS HARDWARE ID AND USED THAT TO FIND ANOTHER DRIVER, AND GOT THE SAME MESSAGE WITH THAT.

  CAN ANYONE HELP

  This is probably the problem. There is a driver installed in the previous conflict. You should really do a clean install on HP laptop.

• I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

  I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  Mini092911 - 02.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 116
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

  AND:

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  WD-20110929-1029 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
  is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
  and ask in their forums known issues.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  ----------------

  BCCode: 117 0 x 00000117

  Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

  BCCode: 117 0 x 00000117<-- read="" this="">
  * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

  1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
  of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

  2 are looking for Virus/Malware.

  3 check the hard disk for errors - run Checkdisk (see below)

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• My graphics card has a driver that is 9 years old, I know there are newer drivers for it. How did microsoft update tells me it's up-to-date.

  My graphics card has a driver that is 9 years old, I know there are newer drivers for it. How did microsoft update tells me it's up-to-date.

  Your option is to buy a Windows 10 compatible graphics card, only very rarely a graphic map of the era XP would be appropriate/compatible with Windows 10.

  See you soon.

• Qosmio G30 - nVidia graphics card failure

  Hello

  as the title says my graphics card went kaput on Qosmio G30, who is 14 months old.

  I read in some places that could be the problem with the generation of nvidia graphics cards.
  Does anyone have any info on this subject because I have just quoted entre.6 and 1.8 k for what fixed it.
  This graphics card is separate from the motherboard or this prob will result in a new motherboard. If anyone has any info I would be very grateful, thank you, thomas

  PS for some reason that I could not connect with my username (yetchh) original so had to create a new account, have no idea why?

  Post edited by: yetchhh

  Hi Thomas

  That s a pity :(
  Especially the GPU (graphics chip) is attached to the motherboard. He welded s and replacement is not easy.

  There are several Lepidoptera, I called the ASP in my country because I needed some info on replacing the CPU on my old laptop and the guy said that the replacement of the CPU or GPU is not easy and is not possible.

  Well, what to say I think you should contact the authorized service provider in your country for replacement of equipment.

  But I wonder why you come in on costs?
  The laptop is about 14 months. If you have registered your laptop on the Toshiba page, you should get a 2 year warranty which should focus on the laptop.

  So all pieces of equipment should be replaced for free.

• NVIDIA graphics card does not work on T430S with Windows 8

  My T430S laptop running Windows 8 and has a NVIDIA graphics card. Somehow, I could never get into the control panel NVIDIA and received the error message below. I checked the setting in the BIOS and it seems that NIVDIA Optimus mode is not available on Windows 8. I've updated the latest driver published in February 2013 for Lenovo, but it does not solve the problem. I was wondering how I could use the NVIDIA card on my compueter.

  Link to image

  Moderator comment: images > 50 KB (or total of > 50 KB) converted into programming. Community rules.

  Hi, jumper1127

  Also there is a BIOS update available for your machine that came out at the same time as the pilot of the Optimus. Which can be found here and can help your problem.

  Good luck. Let me know how it goes

  Adam

• Upgrade graphics card and power supply

  I will apologize for my lack of knowledge, but what are the procedures to follow regarding changing the settings (i.e.BIOS) before unplugging my computer to install the new units; or on startup AFTER installation of the new equipment? I have a long history of building electronic for example, amps, Preamps etc... but another that understand the end mechanical (installation of equipment), I beg near complete ignorance about the computer upgrade. For general information, I install a ZOTAC GeForce GTS250 graphics card and an Antec Earthwatts 650 power supply (the apparent overkill is in a hurry to other possible mods). I will also add extra cooling for all electronic components, it is the killer #1.

  Thank you very much, David... The graphics card is simply an upgrade of a Nvidia GeForce 8500GT card, so I hope no problem!

• Satellite L300D - graphics card and CPU change

  Hi is possible to upgrade CPU speed and graphics card without having to buy the new phone, but just to buy a graphics card and a new processor and replace the one I have in my laptop? If it's possible there's guide on how to do it right? Thank you.

  Also my laptop overheats much faster, and I have even a portable cooler, what should I do? There is no dust and it's ran clean.

  Hello

  Regarding the hardware upgrades, you must check similar topics. It s is not possible you can also read here:
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

  If your laptop is overheating, you should try to clean using compressed air stream:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  As you can see, all your questions are already answered in other threads, so you should do a forum search before starting a new thread. ;)

• How do I change my inter (r) to nvidia graphics card?

  Original title: DISPLAY cards.

  Hello

  I have 2 graphics cards: (NVIDIA GEforce GT520M) and (inter (R) HD GRAPHICS FAMILY) and two of them are enabled

  My question is:

  1. really is that both are enabled because as my display name: Intel(r) HD

  2 - can I change my inter (r) to nvidia graphics card?

  Hello

  Contact Nvidia and see what they have to say about that.

  Here is the link:

  http://www.nvidia.com/content/forums/index.html