New on the generator of vision OR: computing the surface of a component
Hi all
I'm new on this generator of vision OR integer. I would like to know what are the steps that must be taken to calculate an area of a component.
Thank you
first of all, you need to calibrate your image and after that if you want to make your calculation should automatically use binary measures and a particle detection algorithm exist in morphology
Tags: NI Hardware
Similar Questions
-
I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...
Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.
Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.
You can find more details about it in this KB:
And to keep a copy, here's more information:
How to stop missing delivery Notification whenever I build an installer?
Best regards
-
As I said above, I'm new to the world of computing, and I'm currently enrolled in classes, well, my problem is that I got my frozen unconstitutional office. Could someone give me some advice on how to fix this error. Thank you very much for your company.
Hello
If the system is blocked, you may have to restart. If necessary, you can restart in Mode safe
by pressing repeatedly F8 as you boot/startup.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I try to recover my system using the xp pro installation disc get message that the version on the computer is newer tha the version on the cd
You have probably updated to SP-1 and SP - 2 maybe since then and the CD is without both.
You try to restore the system from the cd, or re - install the OS from it?
-
Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?
Did you use the recovery process HP plant or install using a different operating system disk? If the latter, you need to install the drivers for all your hardware, including drivers for wireless network cards. You will get only the pilot specific support for your laptop model HP Web site tech.
If by "wireless card" you mean that you have a 3G USB modem through your cell phone provider, contact the cell phone provider for help with that. MS - MVP - Elephant Boy computers - don't panic!
-
Hello!
I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all). I picked up my installation disc and everything, only to find out that someone stole completely he reapply. I am unsure weather or not it is enabled or whatever it is. I tried to call Microsoft technical support and they said to go to the retailer I bought since then, but the retailer in question no longer exists. I'm just screwed?
Thanks for your help!
You can retrieve the product key, and then use it to re-download a new copy:
Here are four utilities, which can display your product keys if they are still there:
Belarc Advisor: http://www.belarc.com/free_download.html
(He did a good job of providing a wealth of information.)Also: http://www.magicaljellybean.com/keyfinder.shtml
and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
and RockXP: http://www.majorgeeks.com/download4138.html which has additional featuresGo to the recovery of the software Page and then enter your key:
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
If you plan to upgrade to Windows 7, see:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
I want to buy the Photoshop now, but I'm pretending to change my computer very soon. If I buy the software now and install in my computer run, when I buy a new one, I can't install the new with the same license free of charge?
Did you want to say «which intends "instead of"pretend"?» Assuming you did, the short answer is Yes.
If you purchase a perpetual license for Photoshop CS6, you want to deactivate the software on your old system before installing it on your new system.
If your goal is to reach the creative cloud, all you have to do is disconnect on the old system and the newspaper in the new system during the new installation of creative cloud with your Adobe ID
I don't know where you intend to purchase your license, but I suggest on sources other than Adobe themselves. There are a lot of fakers / scammers out there.
-Christmas
-
I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?
Thanks, I have solved this problem, simply delete the old and manually I have brand new!
-
I'm new to the FORUMS of HP. I hope that when I get in a traffic jam, some you wonderful members are going to help me or I can help you out of a jam. I have a laptop HP15-g019wm and love. I still have my computer hand laptop ACER ASPIRE ONE, 11 INCH SCREEN. MLJBA
Welcome to the forum! I think you would find many here who are always willing to give a hand, when help is needed. It is a busy forum extra "helpers" always appreciated too.
-
New bios update (f.29) causes my computer overheating and close
New bios update (f.29) causes my computer to overheat and shut down. What should I do?
Reflash to the previous version. On your drivers page, next to the update of the BIOS to a link to "Previous Versions".
-
Just opened a new vista Windows upgrade disc and my computer does not recognize it? My computer always tells me to put a disc in when it is already. I can't my PID because I can not install the program. I can't get help from microsoft because I do not have my PID. Help please
Your optical disc drive must be able to read the DVD to install Vista.
See you soon. Mick Murphy - Microsoft partner
-
I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I have rebooted, restored (im doing this), ran chkdsk, sfc/scannow, malware, virus, uninstall/install etc and my machine wil always do not run for a long time without going through some sort of problem after an hour or two. Can anyone suggest what to do about this? I read a lot of information online on all the windows 8 and fixes bugs, etc, but anything Microsoft/Windows, which ensures its customers, a hotfix or compesating their customers with software that still works. This isn't a hardware problem, and I can't keep day and bad shooting and trying to fix the day things in?
Sincerely,A client who is a loss for words.Here are some problems in no particular order.1.) apps to not install it, and/or Windows saying they are when they are in fact not. The fix to install / uninstall, or get on the site of windows directly in general does not, and or does not at all.The change permissions 2.) does not work on files that you should be able to access in changing oxnership, permissions, etc.3.) Google chrome won't let me access my account of microsoft (or fact rarely) trying to access assistance. But internet Explorer doesn't?Randomly will increase from Internet 4.) a previous connection wired to wireless to a reboot.5.) my 8 'key' windows was only shown to me after that I have let Windows scan my machine online? Why? I paid for this... I restarted it and it says: service not available (it worked the third attempt which was 1-3 minutes after the initial analysis). Windows only showed my product ID not the key. I know that my victory. 8 was OEM when preinstalled I bought it new, but why didn't we files on it that had nothing to do with activation, appearing on dates for three weeks, or so before I bought it. What is the 'activation of the factory'?6 :) Windows Essentials does not hang for a long time, and the troubleshooterprogram of update simply does not work (I had to go to the website to try tp operate, the bluetooth functionality is not good that there is an error.7.) windows scan and repair gets stuck at 27% (Im not the only one with this problem).8.), avery MS Office 2013 Disappears so often and not easy to reload "we have encountered a problem.The computer manufacturer is responsible to see that it works properly with Windows 8. It says that it is a new computer I contact HP and make these problems their. If you don't get satisfactory results I turn and look elsewhere for a computer. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir
-
PowerCLI new snapshot-> New Snapshot, the method is disabled by "com.vmware.vcDr".
I am trying to get an error control when taking a 'new-snapshot' of a virtual computer (protected by SRM), see code below:
$VMname = < VMname >
$snapname = < nom_snapshot >
try {}
Get-VM-name $VMname | New-Snapshot - name $snapname - memory - suspend - ErrorAction Stop
"SNAPSHOT - OK | Tee-Object - FilePath $logPath - add
}
catch
{
$_ | Tee-Object - FilePath $logPath - add
'INSTANT mislukt along | Tee-Object - FilePath $logPath - add
Output 1
Break
}
The code is a failure for the VM that are protected with SRM and I get the error:
New Snapshot: 25/02/2015 11:47:28 New-Snapshot, the method is disabled by "com.vmware.vcDr".
To C:\Tools\Windows_Updates\CreateSnapVM - Copy.ps1:34 tank: 27
+ Get-VM-name $VMname | New-Snapshot - name $patchname - memory - suspend - ErrorA...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: NotSpecified: (:)) [new-screenshot], MethodDisabled)
+ FullyQualifiedErrorId: Client20_VMServiceImpl_CreateSnapshot_ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewSnapshot
Anyone any idea how the GET some errorcontrol custom "New-snapshot" for SRM protected VM?
Any help appreciated.
Are you sure that you are trying to perform this operation on the protected virtual machine and not the placeholder VM?
-
I just bought a new laptop how old and register CC down new (I have it on a desktop computer and laptop now)? Thank you
Hello
For deactivation and activation help please see the link below.
Enable and disable Adobe products
Please see the link below for the installation.
Download and install Adobe Creative Cloud apps
Hope this will help you.
Kind regards
Hervé Khare
-
ERROR: New-Snapshot (the operation is not valid due to the current state of the object)
Hello guys!
I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)
I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have
- Add snap-ins powercli and connect to virtualcenter servers
- ask the VC servers to virtual machines in a perticular folder
- Loop foreach on these servers to create a snapshot with the name $snapshotname
Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:
- Testmagne1 - normal operation
- Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
- testmagne3 - normal operation
Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.
The strange thing is:
The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)
In virtualcenter, the output is as follows
- Testmagne1 - snapshot is created successfully - as expected
- Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
- Testmagne3 - snapshot is created successfully - as expected
However, the exit in powercli is slightly different:
- Testmagne1 - snapshot is created successfully - as expected
- Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
- Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?
Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"
I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere
Here is some additional information:
1. the Script (abridged version of it. It generates the same error):
-STARTUP SCRIPT-
$ErrorActionPreference = "stop".
Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null
SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names
$servers = get-VM-location 'testfolder '.
$snapshotname = 'Testsnapshot '.
$verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.
If ($verifycreatesnapshot - eq 'y') {}
Write-Host "snapshots of creation...". »
{ForEach ($i in $servers)
Write-Host "instant Creation for $i."
Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}
Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}
}
Write-Host "command finished.
}
else {Write-Host "Operation canceled by user"}
Read-Host "end of the script. Press ENTER to close. "
------------------ END SCRIPT -------------------
2. the PowerCli error messages:
Error for Testmagne 2 (as expected):
File: [DATASTORE114] testmagne2/testmagne2.vmx
DynamicType:
DynamicPropertyInternal:
FaultCause:
FaultMessage:
ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O
perationFailed
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction:
SessionId:
ConnectionId: /VIServer = SENSORED: 443 /
Severity: error
Message: 31/10/2013-10:52:16 New-Snapshot the operat
ion for the entity 'testmagne2' failed with the follo
the wing's message: "file [DATASTORE114] testmagne2/testmagn".
E2.vmx was not found.
Data: {ParameterValues}
InnerException: VMware.Vim.VimException: exploitation of the entity
'testmagne2' failed with the following message: 'thread '.
testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy
ND ".
TargetSite:
StackTrace:
HelpLink:
Source:
Failed to create the snapshot for testmagne2
Error for testmagne3:
Creation of snapshot for testmagne3
ErrorId: Core_BaseCmdlet_UnknownError
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction: An error occurred when executing command: new-Snapshot. I have check
f exception for more details.
SessionId:
Login ID:
Severity: error
Message: 31/10/2013-10:52:17 instant New-capture operation is not
valid due to the current state of the object.
Data: {ParameterValues}
InnerException : System.InvalidOperationException: operation is not valid from
e to the current state of the object.
at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo
reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi
St)
at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService
Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p
rogressCallback)
at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl
and. EndProcessingErrorHandled()
at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC
mdlet. EndProcessingErrorHandled()
TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err
orRecord)
StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT
erminatingError (ErrorRecord errorRecord)
HelpLink:
Source: System.Management.Automation
Failed to create the snapshot for testmagne3
3 PowerCLI version
PowerCLI Version
----------------
VMware vSphere PowerCLI 5.5 Release 1 build 1295336
---------------
Versions of the snap
---------------
VMWare AutoDeploy PowerCLI component 5.5 build 1262826
VMWare ImageBuilder PowerCLI component 5.5 build 1262826
License of VMware PowerCLI component 5.5 build 1265954
VDS's VMware PowerCLI component 5.5 build 1295334
VMware vSphere PowerCLI component 5.5 build 1295334
4 VirtualCenter version
VMware vCenter Server Version 5.0.0 Build 913577
vSphere Client Version 5.0.0 Build 913577
Hosts: VMware ESXi 5.0.0 Build 914586
If you need additional information, let me know
Any help is greatly appreciated
Thank you!
-Loincloth
Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.
Maybe you are looking for
-
Which macbook model is good for daily stock trading?
Which macbook model is good for daily stock trading?
-
Help... I need a firmware for my Walkman MP3 Player NWZ-B172F... it does not turn because I accidentally formatted on PC...
-
Please can someone help with my touch screen! A few weeks ago, it was working fine, all are recognized OK of entry. Then one day it just stopped working. No touch input is recognized at all. I tried reinstalling the drivers HP and NextWindow, did a s
-
Why not rip Media Player or burning a CD?
I was burning CD regularly and then suddenly it stopped. I'll put in a blank CD, click on burn and it will appear to burn but then it says there was an error in the CD burning or a mistake in the engraving of the song and it ruins my CD. I don't know
-
I'm above message. 1. don't know why there are 2. Only turns off when I hit the power button / stop. Can some tell me what that means and how to fix?