300 - 1025uk: touch does not.

Similar Questions

• Qosmio X 300-pad touch does not work

  Hello, I opened and cleaned my toshiba qosmio X-300-130 and when I turned it on evrything worked fine except my touchpad that it did not work or the buttons, so I reinstalled the driver PAD SEMANTICS, but nothing changed so I reinstalled my WINDOWS 7 64-BIT but once again no change, pls pls help!

  I don't know how to help you. All we can say here is that you should check the connection of cables tochpad and be sure that all three touch pad flat cables are correctly plugged into the Council of touchpad.

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• iPod touch does not present as associated device

  My iPod 5th generation touch does not appear on my list of device associated with my Apple account.  How I "associate"?

  Just where are you looking?

  You use the same ID and the device uses one of these characteristics?

  On the devices associated with

  When you use some features of the iTunes Store on your iPhone, iPad, iPod touch, or computer, your computer or iOS device is automatically associated to your Apple ID in iTunes account settings. These features include:

  • Turn on iCloud music library.
  • Download after purchase , you did in the iTunes Store, App Store, iBooks Store or Mac App Store.
  • Enabling automatic downloads.
  • Turn on sharing of family.
  • Subscribe to iTunes game.

  View and delete devices in iTunes - Apple Support

• After updating my iPhone to ios 9.3 iPhone touch does not

  HI guys! I'm too frustrated by the question. I'm updating my iOS to 9.3 (Build 13E233) on my 6-64 GB iPhone (model A-1586) and now I can't even use 10% of my phone. My touch screen works not even taping 100 times but if I press the lock and unlock my phone, my touch screen works very well for a few seconds then freezes while on the other hand all other keys work well while the touch is blocked (for example, Home, Power, Volume buttons) and I know my phone is not stuck but only touch does not. I'm too worried because I can't use my phone even for one moment what to do any help? Any help will be appreciated sorry for my bad English. Following that I

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• iPod touch does not recognize my password 9.2.1 apple ios

  My Ipod Touch does not recognize my password for Apple.  IOS 9.2.1

  Password for what?

  What is the exact wording of any messages?

• iPod Touch does not have 6th gen.

  So my 6th generation iPod Touch decided to completely brick itself. It is quite insensitive, appearing by all measures to be extinct. It does not have to be plugged into a charger or computer. I tested with several threads to make sure that's not the problem. All the buttons do nothing, no matter how long they are kept pressed. I seem unable to force it to turn it on (or stop, if it's just particularly good at playing dead) and can't seem to do anything but keep papers.

  I did not anything out of the ordinary to cause damage, so I don't see why it would be brick suddenly like that. I am running the latest iOS with the updates so far. As far as I can tell, it's just death. Everyone knows a similar problem or have any ideas on how to fix it?

  I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

  Helio83 wrote:

  I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

  The Apple Store is a good idea. You have restored iPod from a backup of the previous iPod? See if any of these articles get the operation of the iPod. If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Supportand If your iPad, iPhone or iPod touch does not respond or won't turn on - Apple Support

  -AJ

• iPod touch does not work.

  I have an iPod touch that I got from a friend X years. So I don't know who it is. From last night, it will not work in my car. I can't turn it on, and my Mac isn't even recognize it either.
  My most recent iPod touch does not right in my car. So I gave to my current girlfriend. How can I fix these problems?

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

  What to do when not working do not directly in the car?

  Have you contacted the manufacturer of car system? Sometimes they are not compatible with the new version of the iOS.

• Software Bloggie Touch does not work because of the DEP - I can't turn off DEP for this program

  Original title: software Bloggie Touch does not work because of the DEP

  I downloaded the Bloggie Touch (Sony) software, but the function of prevention of execution of data in Windows Vista prevents me from using it. Any suggestions? I contacted Sony and they had me re-download the software on their site, but it did nothing. I tried to reset the DEP to allow the Bloggie software, but he says that the processer wouldn't let me do that. Message: I can not turn off DEP for this program.

  Any help would be appreciated.

  Hello
  the only other thing you can do is to do a Bing search for how to turn off dep.
  There are several options (not recommended by the way)
  b Eddie

• Portege M780 finger touch does not

  Hello

  I have a Portege M780 and Windows 7 x 64.

  My laptop recognizes the pen and a point of contact devices.

  Can I use the pen is fine, no problem with that. But finger touch screen doesn´t of work. I go to the control panel and finger touch is enabled.

  I have download Wacom touch dual drivers for W7x64 web technical support Toshiba´s, but I can´t install it because when I try it says '' unsupported '' platform.

  Could someone please help?

  I have download Wacom touch dual drivers for W7x64 support Toshiba´s web

  Where did you find this 64-bit driver?
  The Toshiba European driver page does not touch Dual driver for Win 7 64 bit, but only for Win 7 32 bit

  

• 3D touch does not work inside my Facebook app

  My tactile 3D work well in all that inside the Facebook will not work. In other applications are very well. Safari Facebook as thin. Only the Facebook application itself. Does not. Help I have already reset it. The problem remains the same. Screen protection normal too

  Probably, the Facebook app does not support 3D-Touch. These are individual applications up to support or does not support the feature.

• Hello to all I just upgraded for Iphone 6 seconds more and the 3D touch does not work on some things... What am I doing wrong?

  I just upgraded to the new Iphone 6 s more and tactile 3D on everything works expect applications on the home screen when I long press she made sure you

  can move the apps autour with x, but does not have the menu of dialogue that its supposed to come... what I do wrong... the 3D touch is enabled in settings so have no idea... anyone know thanks...

  What applications you try to press and hold on? To bring up the menu, you need to use more pressure. Simply hold down the icon with a light touch will make the icons wiggle with the X to remove the apps.

• 3D touch does not work

  Hello

  I have iphone 6s, tactile 3d does not work then please give a solution, how to solve this problem...

  I checked in touch 3d is activate sensitivity same test also does not work...

  Use the ID Touch on iPhone and iPad - Apple Support

• Re: Satellite L500D - Touchpad 'touch' does not

  Hello world
  tactile function of my touchpad (to emulate left-clik by tapping the touchpad) not working anymore. I can move the mouse with the pad.

  Also under the pad left button does not work - the right is.
  I have already tried:

  -Update the driver
  -Fn + F9
  -The parameters of the touchpad - the 'touch' function is enabled
  -The material Toshiba - successful test

  but without success.

  You don't know whether a software issue or a hardware one.
  Any suggestions?

  I thank you,

  Andres

  Hello

  As far as I know the option is called tap to click
  You should check if it is enabled in the settings of the touchpad.

  > Also the under pad left button does not work - the right is.
  Perhaps it has something to do with the fact that the left click by tape does not work

  It is difficult to say what might cause this
  As I have said; options have to be checked once more in Control Panel-> mouse-> device-> settings (or properties) settings

  If all the settings would be ok, then a touchpad hardware problem would be possible

• HP Pavilion 15-n241ca TouchSmart laptop touch does not

  I got this laptop a few months there are source in Alberta in the Canada. Worked well for a week or two and then the touchscreen began to stop working intermittently.

  Once or twice, it seemed that permits to clean the screen (not salty) but no more.

  It has just stopped working completely during the last month or so.

  I tried the cleanser to windows on a towel and a microfibre cloth... completely to edges and nothing.

  I ran all the troubleshooters, updates of pilot... everything is up to date and working correctly or what they say.

  Help?

  Thanks in advance

  Thanks for the help. Wish I had asked earlier.

  But... I went to the conversation in support of the site and spoke to a representative of HP service. It to distance a diagnosis and tried to get touchscreen operational mmy, but nothing would work. Finish by wiping off my machine and try from scratch. Still nothing.

  My computer will be picked up by UPS in a few days for a journey to the nearest service center. Obviously, I have hardware problems.

  So my computer is not working properly, BUT the HP customer service is safe.

  Everyone I spoke to there was just great and SO happy to help you. Looks like I'm being sarcastic, but I'm NOT. First day was Gio (sp?) and yesterday it was Cory I think was called the snowman.

  I'm in the Canada, they are in the Philippines.

  These guys were both so friendly and we chatted and laughed as we worked on my machine.

  They felt like old friends.

  Yesterday with Cory was hilarious.

  He asks a few questions... in his professional voice... I let him know that the system restore didn't help and after a few more questions, he asked my delivery address so that my laptop could be picked up.  I'm out to my mailing address and name of course... I tell him the city, then the province (Alberta) and dude BUSTS OUT a "CANADA!"  you're in CANADA! "YES! Yes, I'M in the Canada!

  You see, here at the Canada and especially in Alberta (80% of all NEW jobs in the Canada are created in ALBERTA) there is a SERIOUS labor shortage. We import many workers and MANY are Philipinos. Many are great friends of mine. I'm a musician and a BATCH of Philipinos (they are a bit like Mexican... somehow, MANY of them are GREAT singers. As I mean SCARY good singers... and I met and was good friends with a bunch of musicians Philipino back in the early/mid-90s called the boys of Manilla-Shout Out to Freddie and Oscar).  and so... I feel some sort of connection to the Philippines and it's people and of course, a lot of Philipinos like the Canada and Canadians.

  WHY the rave on the Philippines? Well Yes... I got a little roundabout, BUT... my POINT is that Westerners lament and complain of having to deal with Service Centers the company customer. Sometimes rightly so. You know, a lot of times you call to ask questions on an item and you talk to people in India (also have many Indian friends... This isn't a disparagement) or China or somewhere where they're TRYING to help, but the language barrier is hard to overcome. Warm up. On both ends of the line or the internet, people feel frustrated... you know how it goes.

  BUT... with HP and I talked to three different representatives of CS at LEAST, EVERYONE was VERY helpful. Everyone knew exactly what they were doing. We are patient. They were HAPPY. They spoke a PERFECT English.

  We were able to get my machine... my touch screen works again? Nope :-(

  My machine will work soon? I hope so. MAYBE... IF the service center, it goes to employs Philipino Tech lol.

  As I said Gio, it is the FIRST factory built, brand name of computer I bought in 10 years. My FIRST was an Emachines and it worked perfectly for YEARS. I just grew out of it. Since then, I've been buying little outfits or my own machines, I have pieced together.

  I'm SO happy that I chose an HP machine this time.

  I didn't even need to produce a receipt (I have and would have been able to). GIO remotely connected to my laptop and find all the information he needed.  There was a moment where I said something like... "oh no." Do you think maybe the Source a replacement policy or something? ' and Gio said... "Oh you don't have to worry about this. I see here that you have the complete warranty coverage (I did not purchase the extended warranty when I bought the laptop) until March of next year.

  Once again, my experience with the HP Customer Service has been phenomenal every time I called or chatted with them. GIO has made all diagnostic tests in the book. He uninstalled and reinstalled the drivers. There are troubleshooting performed. He has tried this and he tried. He gave me GREAT instructions. We did a full system restore.

  Once who has not fixed the problem they immediately sent me a box of UPS to take my computer back in. I didn't have to make a complaint or claim or ask or demand. Once the restore has failed THEIR next thing was to get my machine service.

  Between you and me I am hoping that there is something seriously wrong and maybe they'll send me a NEW notebook and maybe this will be the next model!  Yes Yes I know, wishful thinking. But hey... my sons iPod broke down a couple of years and Apple (which is CS was ALSO amazing... at least it was a few years ago) sent him a replacement. The NEXT generation of iPod!

  Samsung Note 2 my wife began to... Well do not receive calls. Samsung has it send to the nearest service center. It worked fine for one day and then started not to receive calls again. Samsung free (sort of) said... ok this time ONLY we'll send it to a center of service AGAIN.

  They did, and it dint work... again. Clearly, they were just a hard factory reset... which my wife had already tried a bunch of times. She has somewhat given up on Samsung and said... you know... I think I'll go back to Apple. Their CS was so much BETTER than Samsung.

  But the next day (like 2 weeks ago), she spoke at Telus, its supplier of cells and explained that his phone was not working and she was a loyal customer of Telus for decades. As his monthly bill (for 3 phones... mine, his and our son) are as close to $200 (Yes, we live in a remote location). She said that when its contracts are met it will be with another (cheaper) provider and another phone. BTW... all 3 of us currently have Samsung droid phones.

  Welllll... TELUS took the steering wheel and said... Don't worry me MAA.  There is no service in your town center so just return it to where you bought the note 2. We just called them and they are waiting for you. They are ready to replace your phone. Simply put the Note2 for a recovery.

  She goes to the store and they say... choose any phone again. It is on Telus.

  They did not have the S5 in stock, but she prefers larger notes, while she walked out with a brand new Samsung Note3 :-)

  The moral of this story which is nowadays that service most of the customer business is VERY GOOD. HP is NO exception.

  My HP hardware has a few problems, so I wouldn't be able to assess their products as EXCEPTIONAL, but their CS? It is MORE than EXCEPTIONAL.

  If YOU're in the market for a new computer, PLEASE if HP is in your line of sight. You are in GREAT hands with HP. I would recommend HP to EVERYONE.

  My computer does not work correctly. I'll be without even if he died (it would be NICE if they had a policy of loan but...) I hope that the turnaround time will be SHORT) but I hope that I will not be without TOO long and who knows... Perhaps they will have to replace my whole notebook and if they do, maybe they'll upgrade me for the next model. Wishful thinking again, I know, but anyway... I KNOW I'll have a good state of computer market again before too long.

  THANKS Hewlett Packard. And ESPECIALLY thank you Gio! And Cory too... AND others who's names I don't remember because our time was very short.

  I'm SO glad that I chose HP!

  :-)

  P.S. I don't think I've never been THIS happy to have a broken product. Laughing out loud.

  Thank you for your responses and suggestions. I think that this thread (without THIS long post) will be useful to many people who have problems with the touch screen in the future.  We'll just hope that "many people" will not be NEEDING help and usually HAVE problems with touch screen.