new user needs help to start

Similar Questions

• New user needs help with the creation of an animation :)

  Hello

  IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.

  I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do

  Would appreciate any help!

  There are several ways to do so.

  One way would be to create a title with the name and title with the password.  Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.

• New user needs help: pattern buffer!

  Hello. As I am a new user on cs6, I have a little problem. When I use the stamp tool to ground that each model is black and white that it even used to be colorful, so how can I change it back?

  By any chnce is your document in grayscale mode?

• new user needing help

  Hello world.

  IM new to this so please be gentle. I have a motorola milestone (1 week) on orange. I had to get orange to set the phone so I can get on the internet.since this is a screen of motorcycle car always comes when I press the home button. Any ideas that it is and how to stop the it.also I can't disconnect from the internet, unless I turn off the phone. I also have a htc phone and it simple to turn off the internet but cant seem to find anyway to do this on the milestone.

  any help that anyone can provide will be much appreciated

  The Milestone is intended to be a 'cloud' device and therefore will be always connected to the internet (if you have the settings configured properly) unless you use an application that disables voluntarily for you. In general, it just means that any application that needs to connect can, without asking, and e-mail can be collected - again without notice to you. If you are on a package data unlimited so this isn't usually a problem.

  If you really want to "disable internet" then something like APNDroidworks by activating / disabling your internet settings between known States, good and bad. For the user what that means is that you have a button that you can put on a home screen that will switch your internet enabled or disabled.

  I don't know what OrangeWorld is or is - that you just want to say that when you start your browser you end up on a page called OrangeWorld? If so, is it as simple Orange to configure your browser so that the homepage is OrangeWorld?

  As for your home main problem is weird. I assume you mean the key 'home' of material and not a button on one of your home screens? As someone has said, the only ways, you should see the car home are either by the presence of a magnet near the rear of the case or by running the application of the "motorola car home."

  If you use a carrying case for your phone, make sure it does not use a magnet for keeping it closed, and if it is use a magnet to take the phone out of the case and try again by pressing the home button.

• A2107A new user needs help with a new media player

  Hi please can anyone suggest a good player to install on my Ideapad A2107A as a built-in custom plays several popular formats such as MKV and some others.i have installed free VLC Player, but I use potplayer on my PC which is excellent and will play all formats, I need... only it is not listed in the application listed , but only "DAUM" is (responsible for the coding of potplayer) I need to use the player in the Portugal where access to broadband is not very good... I'm going on vacation that's why I bought my Lenovo... Thanks a lot for all the help on this topic

  Hi, adrian631330

  Welcome to Lenovo community Fourms!

  I think you can see this Post.

  http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/A1-the-best-video-players/m-p/648187/highl...

  You might just find the right App for you!

  Hope this helps,

• Former Nikon user needs help w / AF on a 5 d MK I

  I bought a used 5 d MK I and new EF 24-105mm f / 4L and I'm having problems with the autofocus. I shot a test subject to 16 feet of focal plane (used a tape measure), but moved Center AF point focal beyond the mark of 20 ft on the lens. I was shooting 50mm at f5.6 so sharpness was ok, but really sweet because the subject was on the near end of the focal length range. When I shoot wide open at distances more close photos are unusable. Any ideas on that? What I need to send to Canon for repair, or is this a known problem with this model of body? I shot Nikon for 20 years, so I'm totally out of my element here; I could not yet understand how to use the self-timer for family vacation photos. Any help for a beginner user of Canon is appreciated!

  Thanks for the reply! I pulled the manual on the web when I got the camera and think I have everything set up correctly.

  What I really need help, is if there is a known issue with AF on the 1 5 or if I use the wrong settings. I'm really just trying to determine if I need to send the body of the camera, lens or two to Canon for repair, or if I would be wasting my money doing so.

  My test subject was 16 feet more distance, but the camera and lens determined she was 20 feet away. The camera was tripod mounted with IS off, Av mode, ISO 800 set at f5.6, 50mm, I Focus mode AF and the central focus point square on the nose of subjects. I used flash ettl and unfortunately I can't remember what was the shutter speed, but I can remove it from the EXIF if it's important. Development was strong at about 5 feet behind the subject.

  The questions remain the same with or without UV filter on the lens. AF seems pretty good for macro up to about 10 feet away, then it seems to be far away. Is this a limitation of the AF system on this unit or could be improved spend the money to have the Canon watch? Or I'm better this unloading at KEH and get another camera?

• New user - need tips to improve the performance and graphics ability

  Hello

  I am a new user.  I loaded Windows 7 64-bit today, and it seems to work fine. (I used only Explorer.) I downloaded by Reallusion CrazyTalk and software is lagging terribly, and the image is blurry. The Forum of CrazyTalk, they recommend updating graphics drivers to fix blurry images. On the NVIDIA site, when I asked her to automatically detect the driver update, it says none is available for my computer (my Mac).

  Question: They have updates driver for Windows... When I am running Windows via Fusion, should I different graphics drivers than those on my Mac?  If so, means that I need another graphics card?  * Of course I'm not super technical. **

  I have attached a screenshot of my info/display of charts:

  

  In addition, molten, I increased the RAM to 3 GB (3000 MB), but it has not improved the situation.

  CrazyTalk allows the user to make a photo 'talk '... It is lively and contains the audio.  I usually save files as uncompressed reviews that are about 4 GB in size (when I worked directly on a PC) but today to test it's obviously "too much" for this system.  (It would have probably been about 2 GB). So I recorded a MP4 (3.7 MB), which has always been a time loooooooong to save - 30 minutes.

  Other info:

  Model name: iMac

  Model ID: iMac9, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 6 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: IM91.008D.B08

  Version of the SCM (System): 1.37f3

  I would appreciate advice and links to information that will help me.

  Thank you

  Dora

  TatianaTheDog wrote:

  I am a new user.  I loaded Windows 7 64-bit today, and it seems to work fine. (I used only Explorer.) I downloaded by Reallusion CrazyTalk and software is lagging terribly, and the image is blurry. The Forum of CrazyTalk, they recommend updating graphics drivers to fix blurry images. On the NVIDIA site, when I asked her to automatically detect the driver update, it says none is available for my computer (my Mac).

  Welcome to the Fusion community.

  Question: They have updates driver for Windows... When I am running Windows via Fusion, should I different graphics drivers than those on my Mac?  If so, means that I need another graphics card?

  Your don't need another graphics card.  By necessity, VMware can pass through native graphics of your iMac to any guest including Windows operating system.  VMware provides its own graphic adapter of substitute (WDDM 3D) or VMware SVA II, with its own pilots.  Apple takes care to provide you with the latest drivers for OS X, you will never have to download all the drivers directly from the graphics vendors.  Details about the virtual hardware and its differences of capacity are covered in the FAQs on VMware Fusion

  Regarding the VMware graphics drivers who are in the VMware tools and are supported if you have installed Windows 7 using Windows Easy install feature in the new computer Wizard.  If you do not use Windows Easy Install (or don't remember), the icon of blue squares of VMware in the system tray is a Visual indicator, they are installed.  But you can confirm the video adapter by using the Control Panel, search for display > change display settings > advanced settings to look at your graphics card.  For Win7, the default value is VMware SVGA 3D.

  Whenever you want to refresh the VMware drivers you can select Virtual Machine > install VMware Tools to install or run the option repair after the Welcome screen.

  In addition, molten, I increased the RAM to 3 GB (3000 MB), but it has not improved the situation.

  Based on the requirements of CrazyTalk6 system I could find, you do not need to allocate as much RAM (3 GB).  Depending on your other needs Windows 7, 1 GB to 2 GB would be better, based on your host, the RAM size.

  Pentium IV 2 GHz or higher recommended

  512 MB of RAM or more recommended

  1 GB space drive or higher recommended

  Duplex Sound Card/VGA Card/keyboard/mouse/Microphone/Speaker

  Display resolution: 1024 x 768 or higher

  Video memory: 128 MB RAM or higher recommended

  Windows 7 / Vista / XP SP2

  Internet Explorer 6 or higher, Firefox 2 or higher

  DirectX 9 and WMEncoder 9 are required to export WMV

  Recommended hardware:

  CPU dual core or higher recommended

  1 GB of RAM or more recommended

  Hard drive 2 GB or more recommended

  Video memory: 256 MB RAM or higher recommended

  Things to try:

  The 3D Aero interface may impose the virtual graphic adapter, then you could try to disable that by getting the properties of the desktop background, choose Customize and change the theme of Windows 7 Basic.

  More radically, you can stop the virtual machine and disable 3D graphics in the VM > settings > display > uncheck "Accelerate 3D graphics."  This will cause Windows 7 use the legacy VMware SVGA II adapter.  The oldest non - 3D adapter looks like it meets the system requirements but requiring DirectX 9 encoding for WMV exporting.   If you save without video compression, that may be OK.  If the non - 3D adapter does not meet requirements, I am sure that the program will display.

• WebServices - need help getting started...

  Hi all

  I am fairly new to Web services and Coldfusion I could use some help getting started. Creating the Web service has already been made, so I need to create a new one, so that the part is already done.  The existing webservice is written in .NET and I need to consume using Coldfusion. I think I have all the information I need from the creator (s) in the various XML files. There are a few examples of applications in the .xml file format in the information that was given, as well as a wsdl.xml file. Of my reading on Coldfusion and Web services is that they are consumed by the...

  < cfinvoke webservice = "yada.wsdl" method = "use" returnvariable = "returnedVal" > "

  and send arguments through

  < cfinvokeargument

  to the Web service that returns the data.

  But t that's where I'm wrong... It seems I should use the wsdl.xml file to connect to the Web service... is that correct? I have to place the wsdl.xml outside the Web root in IIS?

  Any suggestions are appreciated.

  If you try to refer to this wsdl file:

  Directory containing wsdl.xml

  .../wwwroot/mydir/WSDL.Xml

  Then, you must use a parameter like this:

  method http://localhost/mydir/WSDL.xml"="mywsdlmethod"returnvar ="data">

  « ? WSDL"is a ColdFusion function that uses the ability of ColdFusion to generate a wsdl file dynamically on the fly from a SWC file that is configured to be a web service.

• Need help getting started

  Hello

  I heard that Muse is very easy to make Web site. I downloaded the free version and I need help to get started.

  I want to do something like this: http://image.noelshack.com/fichiers/2013/50/1386717589-medal-of-honor-website-preview.png

  How to make tables?

  Blury will be made with paint.net as I did, or I have an option to do it automatically?

  How can I create animations? -> Language, connection and I want to add one thing to copyright at the bottom that you can open and is blury where it is.

  How to make a website, adapting to the different screen resolution and what I choose for the Web site resolution?

  Thanks for helping me.

  I tried alone, but I don't know how to add the link, I tried to make a table, but it wasn't like I wanted to...

  Hello

  Regarding the tables, check this suggestion

  http://forums.Adobe.com/message/5906843#5906843

  And regarding the resolution.

  http://forums.Adobe.com/message/5902453#5902453

  As I understand it, you try to create a sensitive site. It is already added to the feature request, and Muse development team is already working on it.

  I hope this helps.

• need help to start a book printed in

  Help

  Need help to put in place a printed book?

  Ask the person or the company that prints the book how they would like that he put in place. The answer will depend on how it will be printed and bound, and more whether or not it will serve. Based solely on the number of pages, I can guess that this will be a staple binding, and if so, the number of pages must be divisible by 4. A needle on horseback's what you usually see in a magazine. If you remove the clips and drag on a sheet, it will be two pages side-by-side with the fold in the middle and at the back will be more than two pages. That's why there are a number of pages divisible by 4. If your number of pages is only (for example) 30 pages, two of its 32 pages printed on the 8 sheets will be that either be empty, or you can add the content to fill the two blank pages.

• New cascade, I need help getting started to learn

  Hi all

  I'm new to Cascade, so confusing to start.  I have a question that needs your help to clarify:

  1. I create a control in QML Editor, because of the ease to make and listen to samples, give the id to it. So how do the handle in C++ code?

  2. are there any resource tutorial for some basic needs, such as: collect the text box data, display data, etc...

  There are a lot of samples, but I need an explanation of principle so that I can get contact with the sample easier.

  Enjoy your share!

  1. https://developer.blackberry.com/cascades/documentation/dev/integrating_cpp_qml/index.html

  2. https://developer.blackberry.com/cascades/documentation/dev/javascript/index.html

• BlackBerry smartphones new Torch 9800 user - need help with the Message 'Conversation' feature

  I just spent to an older Blackberry Curve to the torch. I'm used to standard text "and will answer' or 'create a new SMS' but T-9800 'Conversation' feature SMS is maddening - all SMS communications with a contact are transferred in a single conversation, regardless of the date or content. I am also unable to send separate replies to individual SMS - just one more in the conversation messages.

  When I checked the text Message Options, the option to display only that I could find was for the 'Bubble' or 'Line'. I also was not able to find all the features that allow the user to put an end to a conversation with a contact or start a new one.

  If someone has encountered this? If so, is there an option or feature I'm on just to correct these problems? And of course, how?

  Thanks in advance!

  Consulted several other forums and just had a face to face with Best Buy rep - looks like the term/phrase I was looking for was "SMS threading"... and there is currently no option on the current operating system of torch for clear thread of SMS functionality.

  Well - it is what it is. I'll have to take consolation that, apparently, I'm not the only one who had a problem with the thread SMS functionality, and a possible fix might be made available in the next software update.

• I forgot my admin password need to install the new program need help please.

  I forgot my admin password, have tried several times but don't remember. I need to install a new program as soon as possible and need assistance please.

  I forgot my admin password, have tried several times but don't remember. I need to install a new program as soon as possible and need assistance please.

  Sorry, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy about this:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• New user needs access to the old user profile files

  Windows 7 Pro on a W2008 domain, the latter leaves the company; User_B will take his place and needs access to all files (including e-mail - WindowsLiveMail);  There are currently three email accounts configured in the profile of the latter.  What is the best way to give User_B access to the data?  I tried to copy the data from the profile folder to the folder profile User_B, but when I try to open a document (Office 2002), I get "there was a problem sending the command to the program".

  When I tried to copy the profile via the control panel... Settings, user profiles, the option "copy to" was not available.

  There must be a relatively simple way to do this.  Help, please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• InDesign CC is great, but I still need help getting started

  Hello

  I started using Indesign CC and I am impressed by the functions it contains and which I use it some time.

  However, I find a few simple things difficult to do, most likely because I don't know enough (I read CS6 Indesign by S. Cohen) and this is the reason why I come here to help.

  (1) what should I do to make my permanent preferences (for example, units of measure, silver background, etc.), as it seems that when I do these choices they are only good for the paper I work with.

  (2) I'm having difficulties in creating, titles, headings and feet (I have to use tables for this?)

  (3) we know don't no how I can mark the entries to create a comprehensive index

  Thanks for your time, venerable Adobe users.

  Serge
  

  I will only talk about headers and footers from Salah has already said how to set your preferences for the new defaults and I do not indexing in my work.

  You asked if you use tables, and the answer is no, unless it makes sense to do it by the nature of the header or the footer. Headers and footers are normally set up on the master pages by adding blocks of appropriate text in positions them where you want these headers or footers appear. The master page objects appear on each page of your document is based on this basis. You can add text variables in executives who will find the style of text on the page in the document and insert it in the header or footer, as well as things like page number markers.

  Make sure what you do your frames large enough to accommodate the largest number or text string page you will encounter. Variables are a single character for purposes of formatting, and the text that they pick up will not break across lines, so you can wrap the text that accumulates on top of itself if the frame is too small. I'm not a fan of tables in general because I hate their formatting, so for a header or a footer, I'd probably use individual text blocks where you might think that multiple cells of a table of a line would be appropriate.