Receiver wireless XBOX 360 will not connect to the controller with Windows XP 32-bit

Similar Questions

• XBox 360 will not connect to the secure WRT54GS network.

  Have you tried the suggestions we found in the forums for the connection manually and we continue getting a connection error. We rebooted the modem and the router as well, and the XBox 360 do not always connect. Any ideas how to make so that it can connect to our secure network without messing up the network that we have already had to reset and set again only a couple of weeks and don't want to go there again.

  It turns out that the problem was with the Xbox360 not its wireless sensor and refusing to install the correct programming for it. Had well cleared.

• Xbox 360 will not connect to the Media Center after that PC has been asleep

  My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.

  Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.

  Hello

  (1) did you make any changes before the show?

  (2) is the specific question when the computer wakes from sleep?

  This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.

  Method 1: Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Method 2: Windows Media Center Extender: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Reference:

  Set up Windows Media Center on the Xbox 360 (Windows 7)

  http://support.Xbox.com/en-in/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Windows-7

  Let us know if that helps.

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• My laptop sees my Xbox 360, but the 360 will not connect to the top of the Tower

  I have a crossover ethernet cable

  I tried everything, but the 360 will not find the network,

  It saying that he "cannot obtain an IP address form the router or modem.

  Your router or modem can be automatically assigns an ip address, you can try a static IP address instead

  
  

  DHCP Server IP address form

  
  

  Help please

  
  

  
  

  Hey tons-of-pleasure-101.

  You can set a static IP address on the Xbox 360 by going to network settings and then manually enter an IP address.
   
  (1) type cmd in the start search field.

  (2) type ipconfig/all in this window, and then press the Enter key. This will display a lot of information.

  3) take down of the IP address, subnet mask, default gateway, and name servers. Be sure to note which is which.

  (4) type exit in this window, and then press the Enter key to close.

  (5) once more, open the start menu. This time, click on Control Panel.

  6) click view the status of network and tasks.

  (7) select the settings of map on the left side of your screen.

  (8) make a right click on your network adapter and choose Properties to open the properties of this internet connection window.

  9) click Protocol Internet Version 4 (TCP/IPv4), and then the properties button.

  Until you make changes, write down the settings you see on this page. If something is wrong you can always change the settings back to what they were! You should see a point in the obtain an IP address automatically box.

  (10) choose an IP address and type in the IP address box. The ip address that you choose should be very similar to the ip address of the router. Only the last number of the ip address must be different.

  (11) put the previously found in section mask subnet mask subnet. The default gateway should enter in the default gateway box. Enter the dns servers we prevoiusly found in the two zones on the DNS server. Completely out of this menu, click OK.

  That's all you should be done.

  Once done, you must assign a static ip address for your xbox as well.
  When you're done, between the two, the only parameter that must be different is the actual IP address. The gateway and subnet mask must be the same on your XBOX and PC LAN connection.

  Refer to this:

  Can not get an IP address from your router or modem
  http://support.Xbox.com/support/en/us/NXE/xboxlive/troubleshooting/NetworkHelp_dynip.aspx

  This should be it.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• XP internet security 2011 will not connect to the internet with the help of bs fake malware?

  It seems that this Web site is the only one that I can access.  Internet security XP 2011 don't let me around.  It seems that it will create fake malware programs just for me to buy, but I won't, I want to just surf the net and make the things I need to do. Please God, help me.  8133685546. I can't check email and hope ill be able to check it again, but there's my number in case I can't.  I tried to get the program to remove, but can't seem to locate it.  Don't know what else to do. I tried to scan for malicious programs, but nothing is ever found in your research, they are fake.

  Hello

  you are infected with malware

  Read this information

  Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer.  When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:

  Windows XP rogue names	Names of Windows Vista Rogue	Windows 7 fake names
  XP Antivirus	Vista anti-virus	Win 7 antivirus
  XP Antivirus 2011	Vista anti-virus 2011	Win 7 anti-virus 2011
  XP Anti-Spyware	Vista Anti-Spyware	Win 7 AntiSpyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 antispyware 2011
  XP Home Security	Vista Home Security	Win 7 Home Security
  XP Security 2011 Home	Vista Security 2011 Home	Win 7 Security 2011 Home
  XP Total Security	Vista Total Security	Win 7 Security Total
  XP Security 2011 Total	Vista Total Security 2011	Win 7 Security 2011 Total
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011

  Follow the EXACT below removal instructions

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

• Centro does not connect to the synchronization with Windows/Palm HotSync

  My Centro ceased to sync with my Windows XP computer.  It just does not connect.  Did the soft reset, restart windows, etc.  No problem in Device Manager.

  The value of sync with outlook on the exchange server data.

  Same Centro and sync cable fine on the Linux machine using gnome-pilot and lines of development to access the same data exchange.

  Assuming that you can navigate through your windows machine.

  1. open Device Manager
  2. when your device is connected, you will see palm os handheld
  3. click straight and say to uninstall the driver
  4 disconnect your device and soft reset it
  5. reconnect the appliance and leave it to reinstall the driver

  This will force reinstall the driver and also tell us if there are errors with the driver.

  Message relates to: Centro (Sprint)

• Activate Adobe on a will not connect to the computer with internet access

  How to activate Adobe on a standalone computer?

  This is the forum Adobe Reader that doesn't require activation. If you let us know what you are trying to activate, we can send you in the right direction.

• receiver wireless Xbox 360 for windows works do not at all

  Used the receiver wireless xbox 360 for windows for a long time, worked well. Unplugged to move the pc, when I have not reconnected no light on the receiver, windows not see or does not detect. Uninstalled the drivers, tried different usb port, nothing seems to work. What can I do? Thank you

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect settings of the Xbox controller. This can also happen because corrupt Xbox software.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Xbox 360 Wireless Gaming receiver for Windows
  http://support.Xbox.com/en-us/Xbox-on-Windows/Accessories/Xbox-360-Wireless-gaming-receiver-Windows#63a0adf333cf44a5b202fb55b8e3054e

  Please also day Xbox software from this link and check.
  Reference:
  https://www.Microsoft.com/hardware/en-us/d/Xbox-360-Wireless-Controller-for-Windows

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Why Vista will not connect to the internet wherever I'm connected with my XP machine?

  Why my computer won't get online wherever I like Xp only

  Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

  Hello

  1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

  2 have you tried all of the suggestions of Fahimulla K?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium

  WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium. It works continuously with a cycle detection, connection, loss of connection; detection, connection, loss of connection, etc... The router works through this cycle, basically acting as if I disconnected and then reconnected to the power to reset, it disrupts my Internet connection to my Wired iMac and wireless, another office to the floor. Paid for Linksys support today and through remote access, he put up a new network on my desktop (iMac). After finishing, the problem still exists. When I told him that the problem had not been corrected, he said just wait an hour or two and it should work itself. She, of course, did not himself. Any ideas out there?

  Nevermind - I seem to have solved the problem with a simple firmware. Funny how the Linksys technician support don't think to ask what version of the router I have or suggest that I should try to upgrade firmware first. However, he is quite good at trying to upsell me for a new router instead of trying to help me solve the problem I had. It makes me want to go buy Netgear next time, thanks a lot!

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.