Newbie? -Mode development

Similar Questions

• day 2 old Canon Rebel T5 90% of the time its stuck in mode development in AI .wont take picture

  even when I push down once pushing halfway it just don't stop development and take the picture.especially inside I found this frustrating.it very said as BUSY all the time.
  I tried the other setting, but it does the same thing,

  is this new camera broken? expected

  should I go back to Costco and get another. cannot take pictures at least externally

  Help my first DSLR and so far, I'm very discouraged

  prior was Panasonic LUMIX FZ70 no problem with it

  awilmot2003 wrote:

  even when I push down once pushing halfway it just don't stop development and take the picture.especially inside I found this frustrating.it very said as BUSY all the time.
  I tried the other setting, but it does the same thing,

  is this new camera broken? expected

  should I go back to Costco and get another. cannot take pictures at least externally

  Help my first DSLR and so far, I'm very discouraged

  prior was Panasonic LUMIX FZ70 no problem with it

  Busy is most often caused by a problem of SD card.

  AIservo is supposed to concentrate all the time.

  The mode that you use on the camera?

  What happens in green square mode?

• How can I activate mode "Developer" on xperia Tablet z?

  Hi all

  I own a Tablet new xperia z.

  One thing that I was like is that default Chrome to the display of the Desktop version of a web page by default (rather than the mobile version of a site).

  I found information online explaining how to proceed:

  http://www.guidingtech.com/16169/desktop-mode-websites-chrome-Android-permanently/

  I wanted to perform the steps described in the "for users without Root access", because I do not want at the root of my brand new camera.

  It comes to getting the work of adb command. I could get this tool via a "mini-sdk" provided on this site:

  http://androidforums.com/FAQs/443072-ADB-guide-updated-2013-05-21-a.html

  When I run the command adb suggested, he noted:

  * demon does not. from now on port 5037 *.
  * the daemon started successfully *.
  error: device not found

  I then read this page about the adb via the "usb debugging": setting Protocol

  http://eSupport.Sony.com/info/878/us/en/

  However, when I try to visit the "USB debugging" on my camera of xperia z equivalent setting, all settings in the 'Developer Options' section are disabled.

  I then read this web page describing how to enable "developer mode":

  http://www.droidviews.com/how-to-enable-developer-optionsusb-debugging-mode-on-devices-with-Android-...

  He suggested going to 'away'and clicking on the 'Number of Build' seven times to activate this setting...

  But when I try this, it doesn't work on my device.

  I've been Googling for awhile to see if the sony devices have an unique alternative to do, so far without success.

  Then you would be able to tell me how I can configure the developer mode on my sony xperia z Tablet?

  Thanks for any help.

  Gurce

  H RyanC,

  Thanks for the link. Unfortunately, the forums are currently read-only, so had the chance to ask the Q it. I tried the the form "contact us" a few days ago, no answer yet.

  But fortunately, I was able to fall on the answer by myself. Will write the answer here, for the benefit of third parties who need to understand this point and to throw off by all the dishes google obfuscation upward:

  • Come on in "settings > developer Options"
  • Notice in the upper right of the screen there is a switch small horizontal slider
    (it is in the 'Settings' title aligned to the right bar)
  • The slider is currently set to the left, then drag it to the correct position
  • A popup appears saying:

    "Authorize the parameters of development?
    These settings are only for development purposes. They can cause your device and applications on it to break or misbehave.

  • Click on 'OK'.
  • You can then enable options such as "USB debugging" in this menu

  I'm a happy chappy now

• Question: Hybrid Mode development

  Is it possible to develop an application in hybrid mode for playbook? For example, using html 5 on disc UI, but use C++ for the development of the lower layer? Creation of an extension of java script seems to be used for this purpose to some extent, but it is necessary to implement an interface in Java. I don't know if it applies to the platform of the playbook.

  Hello

  Currently, webworks on playbook is implemented on the AIR, which means that JS extensions expose AIR functionality. To get to native, you must then make an extension of AIR down to native.

  What you propose could be done in this way, or by using a third party library with C++ browser control.

  One sweet day, webworks forplaybook will be built on Aboriginal people and the process will be easier.

• Can't see the evidence/preview mode develop

  I selects the picture in library mode, then click on develop, but the evidence/preview is just a blue screen. I can't see the photo in the browser window. What should I do? I selected view Magnifier and tried various other things without success. Thank you!

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• Lightroom displays areas of gray in mode develop - fine thumbnails.

  Photoshop is no longer shows that my photos to develop fashion. Previous pictures in my catalog that was not displayed, and are new photos. This includes jpeg, png, cr2, and dng. The vignettes show very well, and my browser (preview) shows the filters applied to the pictures.

  I tried to reset the profiles of colors for my two monitors. I calibrated new profiles using the Windows standard.

  I also tried to change existing profiles (sRGB) – none of these changes had no effect.

  I've updated in lightroom without result. I restarted my PC several times. I realized that I was not signed in, but signing in and out and back in had no effect.

  

  

  Please let me know if you need more information. I was at this for hours.

  Has run a dxdiag:

  Time of this report: 13/05/2016, 22:17:36

  Operating system: Windows 8.1 Enterprise 64-bit (version 6.3, 9600) (9600.winblue_ltsb.150715 - 0840)

  Language: English (regional setting: English)

  System manufacturer: system manufacturer

  System model: System product name

  BIOS: BIOS Date: 07/08/12 19:41:51 worm: 12.04

  Processor: Intel Core i7 - 3770K CPU @ 3.50 GHz (8 CPUs), ~3.5GHz

  RAM: 32768MB RAM

  Available OS memory: 32718MB RAM

  Page file: 8609MB used, 28973 MB of available space

  Windows Dir: C:\Windows

  DirectX version: DirectX 11

  DX setup parameters: not found

  DPI setting: Using System DPI

  System DPI setting: 96 DPI (100%)

  DWM DPI Scaling: disabled

  ---------------

  Display devices

  ---------------

  Card name: AMD Radeon HD 6900 Series

  Manufacturer: Advanced Micro Devices, Inc.

  Track type: processor AMD Radeon Graphics (0 x 6719)

  DAC type: DAC (400 MHz) internal

  Device type: complete unit

  The device key: Enum\PCI\VEN_1002 & DEV_6719 & SUBSYS_31201682 & REV_00

  Memory display: 5872 MB

  Dedicated memory: 2032 MB

  Shared memory: 3840 MB

  Current mode: 1920 x 1080 (32 bit) (60 Hz)

  Name of the monitor: HP Pavilion 27bw LED backlit IPS display

  Monitor model: HP 27bw

  Monitor ID: HWP3052

  Native mode: 1920 x 1080 (p) (60,000 Hz)

  Output type: HDMI

  Driver name: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

  The driver file version: 8.17.0010.1404 (English)

  Driver version: 15.201.1151.1010

  DDI version: 11

  Levels: 11.0,10.1,10.0,9.3,9.2,9.1

  Model driver: Driver WDDM 1.3

  Pre-emption of graphics: DMA

  Calculate the pre-emption: DMA

  You can use the graphics processor that is checked in the preferences? If so uncheck it and try again, it seems to cause problems similar to those that see you.

• My photos are in mode develop they show the basic information in the image... How is it that I rud of which

  When my photos are in the mode to develop they show basic info in the image... How can I get rid of this? Thank you!

  You can the info tab. The i button once or twice.

• LR does not allow me to work in mode DEVELOP

  My LR is very slow and crashes when I move to DEVELOP mode.  I tried an older version of my catalog, but it did not help.

  Thank you all for responding.  I resolved all the issues through a "chat".   LR update solved the problems.   Once again, thank you for taking the time to answer.

• Lightroom CC 2015 won't show the picture mode develop

  Ladies and gentlemen,

  I just purchased Lightroom CC 2015 and it shows me mode images develop.

  The only thing I see is large blue window with rows of white crosses.

  At the same time, found on the upper left shows the normal image. Any idea what is - this? Thank you

  

  Disable GPU acceleration.

• Can't see a photo in mode develop

  I just put my Lightroom for Lightroom CC (PC version) and have a problem.

  In library mode, I can see all my pictures normally as usual. But after moving to develop - I see only blue screen, like this:

  http://take.Ms/25pT5

  But in this mode each instrument works correctly, so if I set exposure to + 5 (for example), i willl see the changes in the browser tab.

  Someone knows, what is it and how can I solve this problem?

  Thank you!

  Go to the performance tab in the Lightroom preferences and disable GPU acceleration.

• Issue mode develop to integrate google map

  Hello

  I am faced with an interesting problem to develop the integration of google map html code mode (screenshot attached)

  The rectangle of card display almost the same size box below filled with black, while in preview mode, it does not work properly. I couldn't find the reason, where I'm doing something wrong.

  Thank you very much.

  

  Hello

  Try custom size (520 x 600), he displayed no black box, as you said that it is controlled by Google Server codes.

  I lived it for years, if you increase the height more than 520 (or almost 550) it will show a black box (Iframe background) in design mode.

  A lot of people call a bug in Google map, even if use use Google map or a script.

  Try to work with 520 as height

  Enjoy working with MUSE!

  Thank you

  Prabhakar Kumar

  Update

• Image mode develop - Orange tint

  I have a problem with my images when I switch to develop mode.  There is an orange tint that appears in each image then I am her tweaking.  The hue is sometimes minor as the example that I have attached and other times it is very difficult to modify the image.  When I return to library mode or export the image it is normal.

  I have attached the same image in library mode and develop to illustrate the issue.  I highlighted the problems with yellow calls in the image that is open in design develop (note No changes have been made to the tint appears as soon as I turn to develop).

  My system uses two video drivers (they are current as of today ' hui):

  Intel HD Graphics 4000, version of the 10.18.10.3621 driver

  NVIDIA NVS 5200 M, 340.84 driver version

  Thanks in advance for any help.

  Jack

  

  

  Are you sure this is orange? Or it is red, and is the highest point in light of clipping?

• Create a dynamic Variable in LabView (newbie Java developer)

  Guys,

  That's my problem, I'm a java developer & c ++ and was interested in learning about LabView. But also simple as indicated by the site OR it is not as banal that I expect it to be perhaps because of my though process. So what I'm trying to get a simple sample to help me start my LabVIEW.

  Example in allows Java say I prompts a user to enter a value that the user enters the [value = 20] & I would be able to create [value = 20 new items], is the value regardless of the user enters. In LabView things do not seem to work that way. So I was hoping that someone provide a nontrivial simple example so that I can better understand how to apply it.

  Thanks for you comments

  Hi * E *.

  I come from a Java background too so might be able to help. I found that LabVIEW is less demanding on the programmer necessarily specify the capacity or the number of variables being created during development and it's a little more intuitively in the background.

  What types of data are you interested? From your post, I would be tempted to use a Subvi "Initialize the array" and wire just at the entrance to size dimension user input.

  In LabVIEW, it is considered advisable to use wires instead of variables wherever possible because they focus on the stream of data as part of the program.

  That help a little?

• Newbie BB development question

  Hello eveyone. I hope this is the right place to post this question, but I'm looking for advice. I'm new to the development for BB, but since 3 days I did a lot of reading. The only problem with this is that the more I read more confused I get. I have developed solutions ASP.NET, but never anything like that for mobile devices.

  Here are my thoughts on what I would do:

  -Create a Web page for the BB, which goes to a SQL Server, accessing a view and extracts the data in a data Repeater or a gridview for viewing.

  I have an IIS server running locally and can be viewed on BlackBerry now. I've set up and you can check out. WML and. Pages HTML to it very well.

  My question is this. I read about this plug-in for Visual Studio 2008. I downloaded and installed successfully.

  I do not know the following:

  -Can I do what I would do without BES?

  -What would be the best way to go about this? A few suggestions on what would be the best way to approach this project.

  Any guidance would be greatly appreciated.

  Thanks in advance,

  Bob

  psu99 wrote:

  So I can just use Visual Studio.net 2008 and create a sample page. I use the PlugIn which can be downloaded or can I just without programming?

  From what you say, you just need Notepad, vim, emacs, any other to design a Web page. The fact that You ' l browse this page with a Blackberry or an iPhone or a Samsung is on top of that.

  psu99 wrote:

  And what you say to me that I didn't need BES... my point of view on what it was only used for PUSH applications.

  You use a BES is required if the Web server is not reachable from outside your corporate network. In this case, you need BES just for its web proxy that will allow your browser to reach a machine inside the LAN. BES can also be used for automatic authentication issues based on the PIN code of your device and/or X.509 private keys that can be installed by the IT company.

• Guide for newbie blackberry developer

  Hi, I am a developer beginner blackberry.

  I would like to ask everyone may be giving me advice for me.

  It is a simple question, I just want to make a unique form like this.

  that I should use listfield or labelfield.

  If you don't mind, appreciated for give me the sample code just for the text current City New York until the RESTAURANT

  Thanks in advance

  

  Think that you will find what you want here:

  http://supportforums.BlackBerry.com/T5/Java-development/implement-advanced-buttons-fields-and-manage...