Newbie BB development question

Similar Questions

• newbie Y560P laptop questions

  Lenovo forums are very informative and I looked for answers to my questions and have found some but not all. I recently (St Patty's day) ordered an ideapad y560P. I should have asked these questions before buying but there was an e-coupon deal that ends the day of St patty, I had wanted a laptop pretty advanced for a while so I jumped. Life is not perfect!

  1. a clean install of windows is possible with recovery disks that Lenovo provides? If this is not the case, what is the best way to do it?

  2. the Y560P can fully utilyze the new SATA 3 SSD as boot drive? Void the warranty?

  3. wait for Lenovo to ship my laptop until the Sandy Bridge sata port questions/reminder are developed?

  4. someone here successfully using imaging software (like Acronis true image} on their laptops?)

  Sorry for the newbie questions. I built my own desktops for years, but this will be my first laptop. Time passes! Thanks in advance for any help.

  Hey, I'll do my best to respond to these:

  (1) actually, no discs are technically provided by Lenovo. Your system comes with a separate, partition that contains a recovery image. That being said, you can create a set of recovery disks by running their usefulness (comes pre-installed). When you use these disks, it basically as a duplication process. So yes, you can do a clean install, if you think it their image pre-built a clean installation

  (2) not sure about the 3 SATA drives, but drives does not cancel your comprehensive guarantee. I would always keep the original drive where the system needs to be sent, but I think that the RAM and CPU are considered as 'evolutionary customer options' and are therefore not guarantee-killers.

  (3) from what I've read, Lenovo has already stopped the lines with questions of Sandy Bridge. None of these units should be delivery to consumers. If I remember correctly, it only affected some of the i7 lines. If you have concerns, you can always call Lenovo with your serial number, and they can check if the unit is affected. However, Lenovo has been very quick to fix this, I just couldn't see their shipping defective units known to customers.

  (4) Acronis and Ghost work quite well, assuming it is a standard drive. I could not find any problems with people using either a product on the readers of the so-called "hybrid".

  Hope that helps a bit!

• Guide for newbie blackberry developer

  Hi, I am a developer beginner blackberry.

  I would like to ask everyone may be giving me advice for me.

  It is a simple question, I just want to make a unique form like this.

  that I should use listfield or labelfield.

  If you don't mind, appreciated for give me the sample code just for the text current City New York until the RESTAURANT

  Thanks in advance

  

  Think that you will find what you want here:

  http://supportforums.BlackBerry.com/T5/Java-development/implement-advanced-buttons-fields-and-manage...

• newbie triggered custom question

  Hi gurus of Labview:

  It could be a very simple question for you guys, please provide some tips.

  Here's my scenario measure: I need monitor output of the sensor which is a signal voltage (to AI0), I just need to get the voltage reading when I get a trigger signal to axis to another (PFI0). I would like to save to a file .txt with the news. on the value of the voltage and the time stamp of each measure. With a simple while loop and the DAQ assistant, I can get the measure to start when a trigger is detected on the PFI0, however, the measure will now continue to operate after that. Instead, I want the system to measure a voltage value, then wait for the next trigger signal. I'm pretty new to labview, so it will be very appreciated if someone can point me in the right direction.

  Thank you very much.

  Shao

  OK, after reading this link given above about 1 sample (timed HW) I think that what you really want is continuous samples with the sample on your external clock clock.

  Apparently there is no buffer with the 1SHWT (I'm short hand here).  If you miss one, you get the overflow error.  That tells me your loop is medium to slow or your pendulum goes faster than you think.  By going with continuous samples, you will not have to worry about this.  You can simply take as much data as you want and save the heap in the file.  This will make things work a little easier.

• Create a dynamic Variable in LabView (newbie Java developer)

  Guys,

  That's my problem, I'm a java developer & c ++ and was interested in learning about LabView. But also simple as indicated by the site OR it is not as banal that I expect it to be perhaps because of my though process. So what I'm trying to get a simple sample to help me start my LabVIEW.

  Example in allows Java say I prompts a user to enter a value that the user enters the [value = 20] & I would be able to create [value = 20 new items], is the value regardless of the user enters. In LabView things do not seem to work that way. So I was hoping that someone provide a nontrivial simple example so that I can better understand how to apply it.

  Thanks for you comments

  Hi * E *.

  I come from a Java background too so might be able to help. I found that LabVIEW is less demanding on the programmer necessarily specify the capacity or the number of variables being created during development and it's a little more intuitively in the background.

  What types of data are you interested? From your post, I would be tempted to use a Subvi "Initialize the array" and wire just at the entrance to size dimension user input.

  In LabVIEW, it is considered advisable to use wires instead of variables wherever possible because they focus on the stream of data as part of the program.

  That help a little?

• CVP newbie on routing questions

  Hello, newbie here in CVP. Got a deployment with UCCE/CVP 9 X and Conn CUCM/Unit 9 X. No Sip Proxy and the current context we have to route calls to CUCM prior routing to ICM/CVP. I know that's not the best Setup, but there is no budget to spend more managers to call for UnityC to CIM at this stage so all calls will be pretty closely from before CUCM hit ICM. That said, I'm getting conflicting information about how to configure routing. Probably more too read things. From my tests, I need 2 PIMS on every PG to cover both CVP servers which means I need 2 labels VRU to account for each customer routing of the CVP (ie. 121212 and 131313)? I have heard however I need one but my call routing will fail if it is not 2. Is this correct? If this is the case, how ICM knows what CVP VRU label to use when a call is initiated of CUCM to ICM? And how is that redundant PVC without proxy SIP or DNS Srv? Any recommendations would be greatly appreciated.

  No, you build the same label for all customers of routing CVP.

  Sent by Cisco Support technique iPhone App

• New developer - question field object

  Hello.

  I'm new to Java for Blackberry developer world and I'm playing with the RichTextField object. I have the following code which fails and I would like feedback as to what I'm doing wrong:

  import net.rim.device.api.ui.decor.Border;
  
  [...]
  
  RichTextField f = new RichTextField("This is a test !");
  f.setBorder(STYLE_TRANSPARENT);
  add(f);
  

  It gives me an error saying: can't find symbol putting highlight the STYLE_TRANSPARENT.

  What is the problem? What I'm missing here?

   

  Well, this time, that the error is not the same thing, is it?  There is no setBorder (int) in the field.  You must provide a border.  Like this:

  f.setBorder(Border.STYLE_TRANSPARENT, BorderFactory.createSimpleBorder(new XYEdges(1, 1, 1, 1)));
  

  Oh and welcome to the forums!

• Developer questions

  I am Brazilian and I understand much English.

  My questions are:

  I need to buy a BlackBerry Code signing keys for an application for BlackBerry, even using J2ME?

  Where can I find an example of a request for data collection with local storage (rowing) in the absence of connectivity?

  Someone in the forum is Brazilian?

  Tanks,
  What is the generic class of Java to access http?

• BlackBerry Smartphones Newbie with 2 questions, need help.

  Hi guys,.

  hope you can help. I recently bought a BB Curve and think it's great.

  However the LED stopped working. I turned off the unit and removed the battery. When I put it in the LED lights up red, so it must work. I checked my profile settings and all say that the LED must be on. I have changed this setting to disabled, backed up, and then put it back on and saved and still no action led.

  The second question is attachments on my emails. I can't open attachments, photos, documents spreadsheets nothing. I use desktop re-Director. Is it possible to have attachments that are sent using this unit or any other bits of software? I have the only BB at work so I'm not so sure, establishment of a BB server is viable.

  Your opinion would be greatly appreciated.

  There is not all the configuration parameters for the Service of the attachment. The following table describes the supported types of attachments on a BlackBerry

  http://www.BlackBerry.com/BTSC/KB03265

  By default the LED flashes green to indicate that you are in a wireless coverage area. I found it annoying and disabled. Check the setting under Options | Screen/keyboard and turn the LED coverage indicator inactive.

• LR 6 develop question mode option?

  I'm confused by what appears to be random differences when I use the mode to develop in LR 6. Sometimes, when I process an image a second identical image with the transformed icon appears in the bottom line of the images next to the original image. Sometimes the processed image back at the end of the images in the bottom row instead of staying where he started. Sometimes when I click on an image processed to copy the settings of the following image the processed image moves to a new location. In summary, I don't understand what I have to do to make the mode of development standard for my use. Any help will be appreciated.

  Use the menu command view-> sort

• Plugin SDK development, questions about the BasicPanel icon

  Hello

  I want to develop a plugin to Indeisgn SDK, use BasicPanel as window, but I can't find how to set an icon for the BasicPanel method.

  Please help me, how can I do.

  

  When you specify kMyIconRsrcID2, which is the place of your ID such plugin that declared in your ID.h file.

  For the colorized icon variant, use the same ID kMyIconRsrcID but a different resource PNGR instead of NFSP type.

• Newbie on MemoryStick question

  I am to evaluate vm workstation for our company and have no real experience with vm workstation.

  I'm hosting on windows 7. I created a machine virtual windows XP without any problem at all. Here is the question, when I'm on windows xp and I insert a USB / flash drive, virtual machine software allows me to connect to it and it displays in the status bar, but I can't see or access in the my computer window.  I really need to be able to copy files from the drive flash on windows xp machine... I read everything I could find, and it seems to me it should work... Sorry if this is a stupid question, but can someone tell me what I'm missing?  Thanks for your help!

  Welcome to the forums!  Do you have the VMware Tools installed in the virtual Windows XP machine?  You should be able to drag-and - drop between your Windows 7 host machine and the virtual machine.  You can disable the removable device (USB key) in the virtual machine to the host o/s.  You should then be able to open the drive, and then drag and drop the files / folders to your Windows XP VM.

  Please keep us informed.

  Good luck... Bruce

• Newbie on permission question

  Hello

  I have an operational 5.0.1 AMS. But I'm a newbie to AMS.

  I want to implement the authorization features for the AMS for streaming (vod) saved mp4 files.

  In a first time, for clients Flash using the RTMP protocol, subsequently for iOS/Android devices using HLS/HDS.

  My plan is that the client sends one identifier internal video to flow and a session id.

  These two parameters should be passed to AMS to another remote server with a PHP API or a SOAP web service. This remote server checks if the video might be listened to (Simplified) and returns true or false to the AMS.

  Now, my problem is that I have no idea where to connect to the communication between the client and the server.

  So far I got the normal way to proceed would be to listen to certain events in the main.asc.

  All the examples I found to date only show how to manage application.onConnect.

  But I would like the AMS to react on the command of NetStream.play (), sent by the Flash client.

  How is that possible?

  And, is it possible to do for HLS streaming that does not rely on Flash clients?

  Thank you very much in advance

  Hyper

  You pass additional arguments to the connect function:

  NC. Connect ("rtmp://myserver.com/test", "12345", "abcdefgh");

  On the media server, definition of the function onConnect to take as many arguments as you expect:

  application.onConnect = function (client, videoID, sessionID) {}

  your code to manage the client connection here, probably to check the values to the remote server

  }

  The customer is always present. You can add additional arguments after her.

  http://help.Adobe.com/en_US/flashmediaserver/ssaslr/WS5b3ccc516d4fbf351e63e3d11a11afc95e-7 edfSSASLR.html #WS5b3ccc516d4fbf351e63e3d11a11afc95e-7fe1SSASLR

  You need to pass arguments in the same order as the onConnect function.

• JavaScript / c# development question

  Hello

  I hope this is the right forum for the question, otherwise please give me the correct link.

  I read in a single page of the html documentation:

  Support JavaScript

  That acrobat provides a rich set of interfaces that are designed to be used from programming JavaScript environment Acrobat. It also provides a mechanism that allows external clients to access the features even from community such as VB .NET, Visual C++ .NET and C# .NET.

  I would like to know where the documentation is the mechanism to use Visual c# .net

  Thanks in advance

  You want the SDK forum. Communication between applications (IAC) is possible in a variety of languages, including c#.

  JavaScript is strictly in-house (you can't control Acrobat from outside of JSX files as you can Photoshop) and IAC is strictly external (you can't embed c# controls in a document). Plugins are written in C++ only.

• Newbie on antenna question

  Hi, I got a 2 x 4402 WLC and 25 x 1242AG TOWER to deploy. None of the ROUND came with the antenna. They are to be deployed in an office environment. The absence of antenna would prevent me from editing above the suspended ceiling, or must they go on the inner walls instead? I could not do a poll on the site but as it is still a construction site.

  Hi Brian,.

  You know, I don't think that there is no 1242 with antennas :(

  «The Cisco Aironet 1240AG series Access Point is a fixed configuration access point, dual band IEEE 802.11a/b/g. built in to the access point are two radio stations, each with * dual diversity antenna connectors.»

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps6521/product_data_sheet0900aecd8031c968.html

  You would need something like the series 1130 (with integrated antenna).

  http://www.Cisco.com/en/us/products/HW/wireless/products_category_buyers_guide.html#http :// www.cisco.com/en/US/products/hw/wireless/products_category_buyers_guide.html

  This does not mean you will need external antennas for use with the 1242.

  I hope this helps!

  Rob