Newbie - request for change of color developing module

Similar Questions

• I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?

  I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?

  The difference between the raw edition photo and editing a PSD is that the PSD has black points and white pinned to the visible pixel values, the raw photo has still "headroom" with values of pixel darker than black visible and brighter than white, so when you export the raw file , there may be details that have improved (or obscured if it was another type of image) of the perception and mapping of the Compensation of the black spot on the final color profile.

  This means not PS is better or LR is lower, it is enough for you to go to a different type of image.  If you don't have PS to do final Assembly, you can probably do the same thing by exporting the raw in a 16 bit ProPhotoRGB TIF file, re-import this TIF and then set it LR, possibly using the tone curve to make the pitch black dark areas.

• I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• Action for changing the color mode?

  Is it possible to create an action to change CMYK to RGB color mode in a batch of files? I've been deleting on the creation of this action.

  Thanks in advance.

  Toni

  Use the command for an item of Menu insertion through the menu in the Actions Panel to record this step.

• Request for change form problem

  Hello world
  
  I want to add an attribute in "edit resources put into service".
  According to my research, I have to modify the application data set * *.xml.
  But I don't know where these request data value file.
  In addition, I don't know what I have to do it after I found this set of query data file.
  
  If someone help me, I'll be happy.
  Thenks.

  Use weblogicExportMetadata.sh/cmd to export the dataset query. CreateUserDataSet.xml is located at * / / iam-features-requestactions/metadata-data model *.

  Ensure that the location in weblogic.properties is defined as

  metadata_from_loc = / metadata/iam-features-requestactions/model-data

  metadata_files = CreateUserDataSet.Xml

  You can also consult 1223763.1 in metalink to export all of the MDS data.

• Newbie request for assistance with several drag-and-drop & multiple targets

  I know that this question has been asked a million times, but I get always very well the solution.  I know that the solution called for me the use of tables in a part of my code, but I have problems understanding how to implement it.  I use Flash CS 5.5 with AS3.

  I have a flash drag-and-drop file which is divided into 4 distinct zones on the stage.  On each box, there are 7 places, for 7 different "puzzle pieces".  The first two spaces on each quadrant have very a very specific order for the correct puzzle pieces, while the 5 additional places on each quadrant also have specific parts, but the order is not important.  I have included my code below for reference (note that I have not all instances, finished yet).

  Basically, in code that's been created, the following bodies have specific targets with specific command:

  D1_1_mc, D1_2_mc, D1_1_mc, D2_2_mc, D3_1_mc, D3_2_mc, D4_1_mc and D4_2_mc.

  All other instances, such as D1_3_mc, D2_3_mc, D2_4_mc, etc. have specific quadrants on which they need to fall, but what about the last 5 'spaces' in each quadrant, the order does not matter.  I know that I can continue to do what I do, but I would have preferred that the last 5 pieces on each quandrant do not have to be in a specific order.

  You can provide any assistance is greatly appreciated!

  var startX:Number;

  var startY: number;

  var counter: Number = 0;

  D1_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D1_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D1_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D1_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D1_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D1_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D2_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D2_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D2_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D2_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D2_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D2_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D2_4_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D2_4_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D3_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D3_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D3_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D3_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D3_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D3_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D4_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D4_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D4_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D4_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D4_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D4_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D4_4_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D4_4_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  function pickUp(event:MouseEvent):void {}

  event.target.startDrag (true);

  reply_txt. Text = "";

  event.target.parent.addChild (event.target);

  startX = event.target.x;

  startY = event.target.y;

  }

  function dropIt(event:MouseEvent):void {}

  event.target.stopDrag ();

  var myTargetName:String = "target_" + event.target.name;

  var myTarget:DisplayObject = getChildByName (myTargetName);

  If (event.target.dropTarget! = null & & event.target.dropTarget.parent == myTarget) {}

  reply_txt. Text = "Good Job!"

  event.target.removeEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  event.target.removeEventListener (MouseEvent.MOUSE_UP, dropIt);

  event.target.buttonMode = false;

  Event.Target.x = myTarget.x;

  Event.Target.y = myTarget.y;

  counter ++;

  } else {}

  reply_txt. Text = "Try Again!";

  Event.Target.x = startX;

  Event.Target.y = startY;

  }

  if(Counter == 5) {}

  reply_txt. Text = "congratulations, you did!"

  }

  }

  D1_1_mc.buttonMode = true;

  D1_2_mc.buttonMode = true;

  D1_3_mc.buttonMode = true;

  D2_1_mc.buttonMode = true;

  D2_2_mc.buttonMode = true;

  D2_3_mc.buttonMode = true;

  D2_4_mc.buttonMode = true;

  D3_1_mc.buttonMode = true;

  D3_2_mc.buttonMode = true;

  D3_2_mc.buttonMode = true;

  D4_1_mc.buttonMode = true;

  D4_2_mc.buttonMode = true;

  D4_3_mc.buttonMode = true;

  D4_4_mc.buttonMode = true;

  Since it seems to afew possible gaps in the code you showed, and what I offer myself in response to your questions, I spent a little time get a working model of what I guess you just using the three targets and the fall of four objects.  If you want, I can make the file available for you, but for now, here's the code that works...

  var startX:Number;
  var startY: number;
  var counter: Number = 0;

  target_D2_1_mc.allowed = new Array (D2_1_mc);
  target_D2_2_mc.allowed = new Array (D2_2_mc);
  target_D2_3_mc.allowed = new Array (D2_3_mc, D2_4_mc);

  D2_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  D2_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);
  D2_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  D2_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);
  D2_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  D2_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);
  D2_4_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  D2_4_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  function pickUp(event:MouseEvent):void {}

  reply_txt. Text = "Good Luck."
  event.target.startDrag (true);
  event.target.parent.addChild (event.target);
  startX = event.target.x;
  startY = event.target.y;
  }

  function dropIt(event:MouseEvent):void {}

  event.target.stopDrag ();

  If (event.target.dropTarget! = null & MovieClip (event.target.dropTarget.parent).allowed.indexOf (event.target) >-1) {}
  reply_txt. Text = "Good Job!"
  event.target.removeEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  event.target.removeEventListener (MouseEvent.MOUSE_UP, dropIt);
  event.target.buttonMode = false;
  Event.Target.x = MovieClip (event.target.dropTarget.parent) .x;
  Event.Target.y = there MovieClip (event.target.dropTarget.parent);
  counter ++;
  } else {}
  reply_txt. Text = "Try Again!";
  Event.Target.x = startX;
  Event.Target.y = startY;
  }

  if(Counter == 5) {}
  reply_txt. Text = "congratulations, you did!"
  }
  }

  D2_1_mc.buttonMode = true;
  D2_2_mc.buttonMode = true;
  D2_3_mc.buttonMode = true;
  D2_4_mc.buttonMode = true;

• Request for change of version of vi

  HI, someone can convert the following vi and save it in an earlier version of labview. I have labview 2011 and unfortunately I can not open it. Someone please help. Thank you

  Please use the Council of the Conversion of the Version you see the link at the top of the page.

• Change is not correctly displayed in the develop Module

  When I make a change in the develop Module, changes are not correctly displayed in the main window and the browser window becomes gray. When I get back to the library Module, the changed image appears correctly. Then when I get back to the develop Module, the changes appear correctly. I followed the troubleshooting steps and a single point Adobe says that the permissions of the user is perhaps not good. I created a new user, and in the new user profile, LR works as it should. I use Windows 7. What should I change in the old "user permissions" to match the new "user permissions"? I prefer to delete the new user, rather than recreate my environment all over again.

  If you see gray windows to develop, it is almost generally a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you do not have a calibrator, try to go into the properties of your screen pane. Go to the color management tab and remove any profile associated with the parser.

• my picture does not show in the develop module?

  Downloaded the trail version creative Cloud and LR6, photos download in the library fine, but when I try to open a photo for editing in the develop module I get a blue screen with an x?  Displays in the browser?

  Any thoughts?

  Thank you!

  Hi michaela,

  This is either because of the incompatibility of graphics card or issue drivers.

  You have to go in the Lightroom preferences > performance > uncheck CPU chart use

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• Change the color of text for the hyperlink in the Blog module

  How to change the color of text for the hyperlink in the Blog module?  I tried to add the code:

  text-decoration: none;

  in the HTML code, but maybe I only am not inserted correctly.

  Any ideas?

  Thank you!

  Hi Casey,.

  Make sure also that you have nothing referring to the color attribute in your CSS.  For example on my test site screen.css control it is here an example of using Firebug to find this.

  

  If still stuck and specify the site and help further.

  Kind regards

  -Sidney

• How to change the color of red for areas outside of the gamut in preview soft proof?

  Hello

  I saw asked this question earlier and the response has been to not even bother with the test, but also to export as a JPEG file in RGB color space, and it is the event for you...  (Thanks for the great video, Digital Dog!) ...

  But...  Still, I was hoping to do a little test in the module development mainly in preview... However I am doing the test on a painting of a few tomatoes and the warning of the range and the tomatoes are all just a big block of red.

  I sure hope there is a way to change this color.

  Thank you!

  Anne

  Sorry, it does not exist.

• 5 Lightroom Develop module does not display the changes in real time - locks on original image

  After almost a year of using Lightroom 5 (Version 5.7.1) with no problem there now will not show changes/changes I do them in the main view of the magnifying glass.  The image on the film down changes.  The Navigator view darkens, once a change is made.  If I I have the active secondary monitor it will show the changes in real time (because of the quality of the secondary monior I do not use it for changes).  If I go back to the magnifying glass library display changes to develop module are shown.  I can also make do and discover tiem real changes in the Librrary module in the quick develop Panel. IF I come back to the develop Module updated (edited) image but more it is stuck on this image in the Loupe view.   I suspect strongly I accidentally made some key race in the error that created this situation, but I can't really pinpoint exactly when this problem occurred are contiguous 5 days ago.

  The problem persists with any image.  I tried several images - old and new.  The only software or any other change that I have introduced in the last 30 days was Piccure + 30 days ago.  I later have it removed as a precaution.  No change has resulted.  I took additional measures include 1) Reseting preferences (twice), 2) reinstall the software twice, the second time I deleted all the files of supported / presets except the current catalog and 3) I have used backup catalogs as well dating back to the period of time, well before the problem appeared.  I am running Windows 7 Professional with Service Pack 1, 64-bit OS

  Any suggestions greatly appreciated.  I feel like I'm under low on things to try.  Thanks - Jeff

  This could be caused by a defective monitor profile.

  As a diagnostic tool and possibly a temporary solution, try to set the monitor to sRGB profile.

  Go to control panel > color management and define the sRGB as the default profile.

  If this solves the problem, you should ideally calibrate your monitor with a standard material.

  

• Background color in the develop module is different than anywhere else

  I am under Lightroom 6.1.1 on Windows 7. If I switch back and forth between the magnifying glass and develop (alternating with pressure 'E' and has '), I can see the background color for the develop module is significantly different, even if it is set to medium gray in the two places. Moreover, if I press on '-' (backslash) in the develop module to compare the pictures before and after, I can see the background color changes back, which is incredibly distracting. The background color in the develop module does not match the color that is used in any other module either. I just installed Lightroom and haven't touched one of these settings, so the background color is always set to medium gray everywhere. What is going on?

  Loupe view (normal gray color):

  

  Develop the vision (bad brownish color):

  

  Develop 'before' view (gray color good once again):

  

  So maybe the brownish background, you see around the image is trying to tell you the calibration of the monitor is turned off.

  Also, try to turn off the processor feature graph using and see if that helps.

• change the colors, mix horizontally for strokes, fills not only?

  I have a set that is dissociated from contours,

  (a previous mix expanded, then separated, leaving the individual contours).

  I change the colors of the end and tried applying edit / change the colors / blend horizontally, nothing happened.

  can we mix the colors of racing in the colours of the edition? (mixture of horizontally, vertically)

  It seems to work for the fillings,

  This sample below, I tried 'expand' features by selecting all the and object / expand apprearance.

  This allowed me to apply colors to edit/change / blend horizontally.

  but, as is clear from the paths, that those on the left have been converted into fillings when I developed, some on the left features remained? weird.

  

  I would like to be able to apply color mixtures to shots, without having to convert them to fills,

  That's right, follow this link: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&promoid=EWQQL (feature request/Bug report form)

  Both going to the same team of Adobe Illustrator.