Action for changing the color mode?

Similar Questions

• How to permanently change the color of a button

  I use an action to change the color of a button.  It works but the color changes for only about a second and then back to the original color.  How can I make the color change permanently?

  Sigh, if a question was clear, that he would not take as long to get a response. I knew there was more than simply by changing the color of a button, where my questions.

  Personally, I would never trust effects for this particular case. They do not always work as expected and even less in 8.0.1 then 7. In addition, as this has always been the case, the application of effects by a step (or shared action) has a lot of limitations, because you cannot set the duration of effect, or specify the path, if it is a motion effect. The only solution that I found and explained a long time ago was to create a custom effect to apply. But the workflow is quite heavy: first he must create the effect based on time with the correct time and settings, then you can save it, but it won't be available immediately in the drop-down list in the dialog of AA. You must apply the effect custom time once, before it becomes available. BTW, the default duration of the tint to apply is 2secs, which cannot be changed in the AA dialog box.

  I don't see your response to Ajit, for some reason, maybe because it is personal and I am just a user. My approach would be to replace the original button with a touch of the color that you want, something as I used in the dashboard in this blog: Captivate 8 - first adventures - Captivate blog

  Forums act as strangely today as effects in Captivate, now the answer to Ajit popped up.

  Text buttons will always have the appearance of the system buttons, you can not change their color. It can be done with text buttons but once again, I never use them more because the form buttons appeared. Those are much easier to style and offer more choices. Furthermore they can be used on master slides and timed for the rest of the project, and you can even insert on Question slides.

• Change the color of the frame of the socket in parallel Mode

  Hello, good day everyone!

  I'm runnning my sequences in parallel Mode.

  When I run a sequence, its color of frame socket continue in blue.

  

  When I finish a sequence, its color of frame socket turns green momentarily.

  

  I would like to change that color by program from my TestStand sequence. I don't know if it is possible.

  Example: If the sequence is waiting for something, the color should change to Orange.

  ---

  When I wanted to change the text that appears in the large textbox of the socket, I had to add the code to my paralleluutdlg.c, the PostParallelUUTDialogStatusMessage function.

  http://forums.NI.com/T5/NI-TestStand/parallel-model/m-p/345847/highlight/true#M10401

  I think maybe I need to add something like this once again to change the color, but I've found nothing related.

  Thanks in advance!

  Hello

  I did recently added this feature to my system. I did it by modifying the example in this article in the knowledge base of NOR. I don't know if it's the best way to handle this, but it worked fine for me. I have modified the function as shown below. You simply pass your message and the hexadecimal color you want to use.

  Hope this helps, maybe someone more knowledgeable can ring in to see if my work practice seems ok.

  _stdcall DLLEXPORT int PostParallelUUTDialogStatusMessage (int dlgHandle, int testSocketIndex, int myColor, char * statusMsg)
  
  {     Int error = 0;}
  
        ERRORINFO errorInfo.
  
  int panelId = dlgHandle;
  
        int childPanel = - 1;
  PUUT_PanelData * panelData = NULL;
  
        TestSocketData * testSocketData = NULL;
  errChk (GetPanelAttribute (panelId, ATTR_FIRST_CHILD, & childPanel));
  
        errChk (GetPanelAttribute (panelId, ATTR_CALLBACK_DATA, & panelData));
  testSocketData = & (panelData-> testSocketDataArray [testSocketIndex]);
  
  	  SetCtrlAttribute (childPanel, testSocketData-> tonalite [kTSCtrl_Bg], ATTR_FRAME_COLOR, myColor);
  SetCtrlAttribute (childPanel, testSocketData-> tonalite [kTSCtrl_TestSocketIndex], ATTR_TEXT_BGCOLOR, myColor);
  errChk (ResetTextBox (childPanel, testSocketData-> [kTSCtrl_Status] tonalite, statusMsg));
  Error:
  error return;
  
  }
  
  

• Change the color of the text in several .psd with actions

  Is there a way to change the color of the text layers in several files in .psd (with a different text in each of them) with actions?

  All the files that I have to do that with are structured in the same way - background and above a layer of text.

  Here are the basics...

  #target photoshop;
  main();
  function main(){
  //select folder where PSDs are held
  var selectFolder = Folder.selectDialog( "Please select folder of PSDs");
  //if no folder selected quit.
  if(selectFolder == null) return;
  //get an array of all PSDs in the folder
  var fileList = selectFolder.getFiles("*.psd");
  //iterate through file list
  for(var a in fileList){
  var textColour = new SolidColor();
  textColour.rgb.hexValue = "00ff00"; //set colour to green
  open(fileList[a]);
  activeDocument.activeLayer = activeDocument.artLayers[0];  //Select top layer
  if(activeDocument.activeLayer.kind == LayerKind.TEXT){ //check if it is a text layer
  activeDocument.activeLayer.textItem.color = textColour; //set text to colour
  activeDocument.save(); //Save changes
  activeDocument.close(SaveOptions.DONOTSAVECHANGES); //Close document
  }else{//not a text layer so close document
   activeDocument.close(SaveOptions.DONOTSAVECHANGES); //Close document
   }
  }//end of filelist
  };
  

• Action to change the border color changes the color of full object instead

  Whenever I try to do an action in which I change the color of the border, the action is not the way that I save it. Instead to change the border color, as I did in the record, the action changes the color of the whole object (for the color that I have saved) and leaves the border to be black.

  Ok. I think that actions make a difference between the stroke and fill. If you have an action to apply a swatch/color, it will apply this color to everything you have 'face' (look at your tool palette: fill overlaps the race?).

  to get what you want, you may need to make a graphic with the fill color style, as you want and use the action to apply instead of the shade.

• Address field is red - a color that is difficult for me to see. Is it possible to use the configuration editor to change the color.

  Apparently a bug in Thunderbird is changing the "To" address to the Red even if the recipient is in my address book. The address is displayed when I start typing the first few letters of the recipient, but the text turns red which is difficult for me to see. I want to continue to enter addresses that I always (first letter type or two) would be the simplest solution to change the color from red to something easier for me to read. I looked in the configuration editor but can't seem to find a key that is appropriate for the address field. Can anyone provide assistance?

  Update to Thunderbird 38.0.1.

• How can I change the color to search for text in firefox?

  When you press CTRL + F in Firefox to make appear the text search and you search for a Word, the word is highlighted in this neon-green color. Is there a way to change the color of this? The green color is barely visible.

  As I mentioned in my first post, you can right-click and choose New > String to create the entry.

• Change the color setting for the monitor at a resolution of the screen

  Why have I not change the colors to true color (32 bit) to high color (16 bit) in order to have a clear view for some of the programs?

  Hello

  Your problem with clear display is not related in large part to the quality of the colors

  I guess you have Win 7. Let's check some settings of

  • Your resolution is set correctly? Go to display properties and check the resolution are set at the recommended.
  • Set your level of color quality 32 bit true color
  • Click on Start, and then click Control Panel option. Click view to open the options screen to change the size of screen text on Windows 7 operating system. Check if Smaller - 100% (default) is selected.
  • Check the ppp settings go to set custom text (PPP) size and check if the value is 100%, and use Windows XP style DPI is checked.

  What programs do not display correctly?

  Please publish results.

  Best regards

  Andrew

• need instructions for changing the ITB on hp color laserjet cp1518ni

  need instructions for changing the ITB on hp color laserjet cp1518ni

  Hello the circus,

  Unfortunately the ITB - transfer belt doesn't seem to be a replaceable piece by customer. You will need to call our technical support at the 800-474-6836, and they can help you get this problem is resolved. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://goo.GL/kQDB

  HP out of warranty of the Support Options for HP printers selection:
  http://goo.GL/WJ1Vb

• Change the color of the development of the action bar

  Hi all

  Please help me on how to change the color of the focus of the action bar, the default color of the action bar is blue I want to change it to yellow.

  Thanks in advance.

  Do not think, that can be done with the latest version of the SDK.

  See this http://supportforums.blackberry.com/t5/Cascades-Development/How-to-change-tabbed-pane-background-col...

  -Dishooom

• Is it possible for a Cascade application change the Notification Mode to vibrate at normal

  I am interested in creating a timer application that returns my phone in 'Vibrate only' notification 'Normal' after a period of time defined.  I knshow you need to set permissions, but I didn't know anything like that to give permission to do so.  I have a Z10 with 10.2.1 on it.

  Is this possible or not BB 10.2.1 avoid this?   It would be nice to be able to do.

  A snippet of code showing how to set up permissions for this would be useful.

  You can change the Notification Mode since 10.2, here's what you need to do.

  Add this line to the bottom of the file bar - descriptor.xml, under the tab "source":

  access_notify_settings_control
  

  Add this line to your .pro file:

  LIBS += -lbbplatform
  

  Add this to your file:

  #include 
  
  public: Q_INVOKABLE void switchMode();private:
      bb::platform::NotificationGlobalSettings* notificationGlobalSettings;
  

  Add this to your .cpp file:

  void YourClass::switchMode()
  {
      if (notificationGlobalSettings->mode() == bb::platform::NotificationMode::Normal) {
          notificationGlobalSettings->setMode(bb::platform::NotificationMode::Vibrate);
          break;
      } else if (notificationGlobalSettings->mode() == bb::platform::NotificationMode::Vibrate) {
          notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
          break;
      }
  }
  

  Simply call switchMode() function in c ++ or QML to switch between the Normal and the vibrator. Note that this code will do nothing if the mode is set to anything else than Normal or vibrate. If you prefer to scroll through all the available Notification mode, use this function:

  void YourClass::switchMode()
  {
      switch (notificationGlobalSettings->mode()) {
          case bb::platform::NotificationMode::Normal : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::PhoneOnly);
              break;
          }
          case bb::platform::NotificationMode::PhoneOnly : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Vibrate);
              break;
          }
          case bb::platform::NotificationMode::Vibrate : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Silent);
              break;
          }
          case bb::platform::NotificationMode::Silent : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::AlertsOff);
              break;
          }
          case bb::platform::NotificationMode::AlertsOff : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
              break;
          }
          default : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
              break;
          }
      }
  }
  

• Smartphones blackBerry how to change the connection mode for a BlackBerry Internet Service account on my 9700

  Got my first BB is the 9700 and I believe that my company doesn't have not BES, I must connect on my BIS via a computer to set up my work email (Microsoft Exchange Server). After having read about it and try, I get an error message on the Web site of my provider which basically means that I need to change the connection mode for a BlackBerry Internet Service account. I checked the site Web of Blackberry and the instructions do not work for my 9700. Can someone help me please?

  Thank you very much

  Buskroth

  the link provided should have addressed your question, if you "can't get there from here" - I would suggest that you contact your carrier because they need to move your account password enabled allowing connect you via a non - BB browser to set up your BIS email setting...

• For Adobe Reader for iPad: for the Write Anywhere feature, how can I change the color from red to black?

  For the Write Anywhere feature, how can I change the color from red to black?

  Hi Jason,

  Open the PDF in Acrobat Reader

  By the low toolset select comment > Freehand

  After doing the drawing freehand click on save at the top right

  Then tap & hold on this drawing freehand in the PDF file and will get a contextual menu just above in the black bar.

  The menu options are: delete, thickness, color, opacity

  From there, you can change the color.

  Thank you

  Abhishek

• My color, setting for LR and PS is ProPhoto RGB. If I want to export my photos and place them on OneDrive or watch on TV of the photo, can I change the color setting in sRGB?

  My color, setting for LR and PS is ProPhoto RGB. If I want to export my photos and place them on OneDrive or watch on TV of the photo, can I change the color setting in sRGB?

  In general, I would recommend sRGB, if images must be consulted on the screens of TV or PC monitors. sRGB is usually the universal profile for sharing photos on the web. If you want to share your images on a single disc, most of the people will see their best, without changes in color, with an sRGB profile.

  So it really depends on your goal. You use a player for sharing and viewing on backup and storage devices.

• Change the colors preferred for Dreamweaver CS6

  Hi people!

  Is it possible to change the theme color for Dreamweaver...

  I tried 'colors.xml' change and it does not work...!

  I know that can do via Edition > Preferences coloring Code but it's tedious...

  bookie56

  You can certainly change the XML file.  It's exactly what I did to change the colors of my code to a dark background theme.

  Save your old colors first of all, you can come back later.

  Make sure that hidden files/folders are displayed in your file manager.

  Mac:USERNAME/Library/Application Support/Adobe/Dreamweaver CS6/en-US/Configuration/CodeColoring/Colors.xml

  Win:C:\Users\USERNAME\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\CodeColoring\Colors.xml

  To see the changes, you must close and reopen DW.   See this link: Dreamweaver Color Theme Editor

  Nancy O.