Newbie user-NAT, PAT, the two PIX?

Hello

I'm test I set up my PIX 515e barriers make the lives of my users living hell, and I don't know I do NAT PAT or both.

I have an internet connection through a cable modem that is currently connected to a Linksys router. I'll say goodbye to Linksys and use only the PIX.

So my question is do I need to NAT or PAT from the outside to the inside and don't I need of NAT or PAT on the inside? To make that more complicated things that do, I do with my DMZ?

A side not I currently use the linksys to the port before MS Office an interior workstation remotely, can I still do?

Thanks for any help, somebody has.

Marc

Hi Marc,

The document you need is:

http://www.Cisco.com/warp/public/707/28.html

Hope this helps and let me know if you need further information/assistance and good luck with CCNA.

Thank you - Jay.

Tags: Cisco Security

Similar Questions

Need to align the two radio buttons in one line

Hi all

In my BlackBerry Application, I have a part of the user interface where I need to align two radio buttons in one line.

I used the code to design the user interface, but the two radio buttons below are overlapping.

SerializableAttribute public class BBSettingsScreen extends form {}

Rbg RadioButtonGroup = new RadioButtonGroup();

RadioButtonLayout raButtonLayout = new RadioButtonLayout();

raButtonLayout.add (new RadioButtonField ("ONE", rbg, true, RadioButtonField.FIELD_RIGHT));
raButtonLayout.add (new RadioButtonField ("TWO", rbg, false, RadioButtonField.FIELD_LEFT));

Add (raButtonLayout);

SerializableAttribute public class RadioButtonLayout extends Manager {}

public RadioButtonLayout() {}
Super(Manager.VERTICAL_SCROLL |) Manager.RIGHTMOST);
}

protected void sublayout (int width, int height) {}
Field field;
get the total number of areas falling under this Manager of
int numberOfFields = getFieldCount();
int x = 0;
int y = 0;
for (int i = 0; i)< numberoffields;i++)="">
field = getField (i); get the field
setPositionChild(field,x,y); set the position of the field

layoutChild (field, width, height); Spread the field
x += 30;
}

width = 70;
height = 20;

setExtent (width, height);
}

}

}

Please help on this...

Thank you & best regards

Chintada Ravikumar

Try this:
```
RadioButtonGroup rgb=new RadioButtonGroup();
HorizontalFieldManager hr1=new HorizontalFieldManager(FIELD_HCENTER);
RadioButtonField radioOne=new RadioButtonField(" RadioOne",rgb,true)
{
    protected void layout(int width, int height)
    {
        super.layout(75,30);//Width and height according to the button name;
        setExtent(75,30);//width and height according to the button name;
    }
};
hr1.add(radioOne);
RadioButtonField radioTwo=new RadioButtonField(" RadioTwo",rgb,false)
{
    protected void layout(int width, int height)
    {
        super.layout(75,30);//Width and height according to the button name;
        setExtent(75,30);//Width and height according to the button name;
    }
};
radioTwo.setPadding(0, 0, 0, 20);
hr1.add(other);
add(hr1);
```

VPN connection between two pix firewall problems

Hi, trying to create a VPN between the firewall two pix a 501 and a 506e.

currently on the 506th pdm shows 1 IKE tunnel in the stats, but it displays then return to zero. The two hosts of pix can access the web and ping each other gateways.

I posted the 506th config but the 501 config is the same.

outside IP for pix 506th = a.a.a.a

outside IP for pix 501 = b.b.b.b

Internet service provider ip of the gateway to 506th = x.x.x.x

Thank you

Alex

Hi Alex

See the configuration on the other side (PIX501) it will be difficult to solve, you'll need to be sure when it is a phase failure 1 or phase 2.

Please note between the two PIX IPSec negotiation fails if both of the phases SAs IKE do not match on the peers.

Cordially MJ

profile settings user lost to one of the two profiles

I have two user profiles, the two level admin on my computer (XP PRO SP3). the other day I walked into my profile and restored all my custom settings back to default IE. my wallpaper, bookmarks in firefox etc. even started with the tour of xp when I logged in. I check other profile and who has started up as usual with all custimzations. I tried the system restore, but none of the 4 previous points worked.

Hello booyah99

It seems that your profile has become corrupted and Windows created this new one for you.

Take a look for your Documents

C:\Documents and Settings\old user name\My Documents

And your Favorites

\Favoritesold usernameC:\Documents and Settings\

.

How to remove a user account on the HP 2000. I created two by mistake

How to remove a user account on the laptop HP 2000. I created two by mistake

Sure...

http://www.technoon.com/how-to-delete-user-account-in-Windows-8.html

With the help of PAT on two interfaces

Is it possible to do? I have an ASA5520 with 4 interfaces:

outside in-> dry, level 0

DMZ-> s level 50

store-> s level 90

Interior-> s level 100

I want to PAT for outgoing access to DMZ and outside, but I also need to PAT for originating traffic inside, going to store. Can't do the work. I'd appreciate any help.

Maryse

The instance of number 2 NAT is not valid:

global interface 2 (store)

Global 1 interface (outside)

NAT (management) 0 0.0.0.0 0.0.0.0

NAT (store) 2 10.2.195.0 255.255.255.0

NAT (inside) 1 172.0.0.0 255.0.0.0

You're matching the criteria of nat and initiate the process of nat on the same interface.

To meet your needs, I can understand them better, you can try:

NAT (dmz) 1 192.168.2.0 255.255.255.0

Global 1 interface (outside)

This meets the criteria that you said:

> I want to PAT for access to DMZ and > outside

Then, I would do this:

NAT (inside) 1 172.0.0.0 255.0.0.0

global interface (store) 1

This meets the criteria that you said:

> but I also needed PAT to originating traffic > inside, go to store.

Match criteria on the statements of nat and pat addresses on the global statement is presumptuous, but some adjustments are possible. This should achieve good goals.

The rate of HTH pls!

interesting question of the vpn site to site NAT/PAT traffic config

I have an ASA 8.4.2 running code and am just checking the Site to site configs before migration of tunnel. more precisely if the NAT/PAT and ACL is correct. Phase 1 is already defined and work, as well as cryptographic maps and tunnel groups.

When you set the traffic interesting in the ACL are you using NAT or the real IP? The order of the ACL is correct?

First of all:

The vedor network is a 192.168.1.10 and must be coordinated to 10.1.0.2
```
name 5.6.7.8 VendorName object-group network VendorName-R network-object host 192.168.1.10 object-group network VendorName-NAT-R network-object host 10.1.0.2 object-group network VendorName-L network-object host 10.1.1.3 access-list VendorName-crypto extended permit ip object-group VendorName-L object-group VendorName-NAT-R nat (inside,outside) 1 source static VendorName-L VendorName-NAT-R destination static VendorName-R VendorName-R
```
Second:

Sellers network is 192.168.1.0 to 192.168.2.0, these must be PATed 10.1.0.2 and 10.1.0.3

192.168.1.20 and 168.1.21 must be staticly using a NAT 10.1.0.4 and 10.1.0.5

Name the SupplierName 5.6.7.8

object-group network VendorName-R-1

network-object subnet 192.168.1.0 255.255.255.0

object-group network VendorName-R-2

network-object subnet 192.168.2.0 255.255.255.0

object-group network VendorName-R-3

network-object host 192.168.1.20

object-group network VendorName-R-4

network-object host 192.168.1.21

object-group network VendorName-NAT-R-1

network-object host 10.1.0.2

object-group network VendorName-NAT-R-2

network-object host 10.1.0.3

object-group network VendorName-NAT-R-3

network-object host 10.1.0.4

object-group network VendorName-NAT-R-4

network-object host 10.1.0.5

object-group network VendorName-R

network-object VendorName-NAT-R-1

network-object VendorName-NAT-R-2

network-object VendorName-NAT-R-3

network-object VendorName-NAT-R-4

object-group network VendorName-L

network-object host 10.1.1.3

the object-Network 10.1.1.6 host

VendorName-crypto allowed extended ip access-list object-VendorName-L Group VendorName-R

NAT (inside, outside) 1 dynamic source VendorName-l VendorName-NAT-R-1 static destination VendorName-R-1 VendorName-R-1

NAT (inside, outside) 1 dynamic source VendorName-l VendorName-NAT-R-2 static destination VendorName-R-2 VendorName-R-2

NAT (inside, outside) 1 static source VendorName-l VendorName-NAT-R-3 of destination VendorName-R-3 static VendorName-R-3

NAT (inside, outside) 1 static source VendorName-l VendorName-NAT-R-4 static destination VendorName-R-4 VendorName-R-4

Your valuable traffic acl MUST be the IP NAT address.

Problem with the VPN site to site for the two cisco asa 5505

Starting with cisco asa. I wanted to do a vpn site-to site of cisco. I need help. I can't ping from site A to site B and vice versa.

Cisco Config asa1

interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 172.xxx.xx.4 255.255.240.0
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.60.2 255.255.255.0
!
passive FTP mode
network of the Lan_Outside object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
Access extensive list ip 192.168.60.0 Outside_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_2 of object-group a
network of the Lan_Outside object
NAT (inside, outside) interface dynamic dns
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 172.110.xx.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.60.0 255.255.255.0 inside
http 96.xx.xx.222 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 96.88.75.222
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
inside access management

dhcpd address 192.168.60.50 - 192.168.60.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_96.xx.xx.222 group strategy
attributes of Group Policy GroupPolicy_96.xx.xx.222
VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 96.xx.xx.222 type ipsec-l2l
tunnel-group 96.xx.xx.222 General-attributes
Group - default policy - GroupPolicy_96.xx.xx.222
96.XX.XX.222 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Cisco ASA 2 config

interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 96.xx.xx.222 255.255.255.248
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.1.254 255.255.255.0
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the Lan_Outside object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_4
ip protocol object
icmp protocol object
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_2 of object-group 192.168.1.0 255.255.255.0 192.168.60.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_4 of object-group a
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.60.0_24 NETWORK_OBJ_192.168.60.0_24 non-proxy-arp-search of route static destination
!
network of the Lan_Outside object
dynamic NAT (all, outside) interface
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 96.xx.xx.217 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 172.xxx.xx.4 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 172.110.74.4
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0

dhcpd address 192.168.1.50 - 192.168.1.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_172.xxx.xx.4 group strategy
attributes of Group Policy GroupPolicy_172.xxx.xx.4
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 172.xxx.xx.4 type ipsec-l2l
tunnel-group 172.xxx.xx.4 General-attributes
Group - default policy - GroupPolicy_172.xxx.xx.4
172.xxx.XX.4 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
inspect the http

For IKEv2 configuration: (example config, you can change to encryption, group,...)

-You must add the declaration of exemption nat (see previous answer).

-set your encryption domain ACLs:

access-list-TRAFFIC IPSEC allowed extended LOCAL REMOTE - LAN LAN ip

-Set the Phase 1:

Crypto ikev2 allow outside
IKEv2 crypto policy 10
3des encryption
the sha md5 integrity
Group 5
FRP sha
second life 86400

-Set the Phase 2:

Crypto ipsec ikev2 ipsec IKEV2-PROPOSAL
Esp aes encryption protocol
Esp integrity sha-1 protocol

-set the Group of tunnel

tunnel-group REMOTE-PUBLIC-IP type ipsec-l2l
REMOTE-PUBLIC-IP tunnel-group ipsec-attributes
IKEv2 authentication remote pre-shared-key cisco123

IKEv2 authentication local pre-shared-key cisco123

-Define the encryption card

address for correspondence CRYPTOMAP 10 - TRAFFIC IPSEC crypto map
card crypto CRYPTOMAP 10 peer set REMOTE-PUBLIC-IP
card crypto CRYPTOMAP 10 set ipsec ikev2-IKEV2-PROPOSAL
CRYPTOMAP interface card crypto outside
crypto isakmp identity address

On your config, you have all these commands but on your VPN config, you mix ikev1 and ikev2. You have also defined political different ikev2. Just do a bit of cleaning and reached agreement on a 1 strategy for the two site (encryption, hash,...)

Thank you

PAT for two web servers

Hi all.

I want to change the MS ISA for Cisco ASA server, but I have problem with PAT.

The two addresses are published under the same internet address 1.1.1.1 MS ISA server configured static PAT for two web servers, example.web1.com inside the address 192.168.1.10 and example.web2.com inside the address 192.168.1.11.

When the user try to open the web page example.web1.com the internet ISA Server MS create translates an internal address 192.168.1.10

When the user try to open the web page example.web2.com the internet ISA Server MS create translates an internal address 192.168.1.11.

In the cisco example uses single address:

static (inside, outside) tcp 1.1.1.1 192.168.1.10 www www netmask 255.255.255.25

but I have two web servers uses the same port 80 and even outside of the address 1.1.1.1

SAA can create translation URL? For example:

static (inside, outside) tcp example.web1.com, www www 192.168.1.10 netmask 255.255.255.255

static (inside, outside) tcp example.web2.com 192.168.1.11 www www netmask 255.255.255.255

Hello

To my knowledge, this type of NAT is not possible in the SAA.

The ASA has nothing to differentiate the 2 translations to eachother other than the order of the NAT configurations. But I think that at the level of your software it doesn't accept even the second NAT configuration that it overlaps with the first. In the most recent software that it would accept the second configuration, but the traffic would still be hit only one of the NAT configurations.

There must be something on the ISA MS who, in addition to NAT overlapping, knows that static PAT choose based on the requested web page?

-Jouni

With PAT on Cisco PIX VPN client

Dear all,

I have a PIX 515 to the main site with the IPSec security is enabled. Homepage user using 3.x VPN client connects to the PIX for VPN access. When user Home use real IP, I can ping to the local network of the main site. However, when the Home user using a router with PAT, the VPN can be established.

Is there a setting I should put on PIX, VPN client or router?

Thank you.

Doug

And if you still have problems, upgrade your pix, 6.3 and usage:

ISAKMP nat-traversal

But the first thing would be to check the IPSEC passthrough as Ade suggested. If the device is a linksys check the version of the firmware as well.

Kind regards

Inside Source NAT from the remote host and VPN from Site to Site

Hi all

I was in charge of the construction of a vpn tunnel with a firewall PIX of our business partner company and ASA of the other company of the firewall. Traffic will be A partner business users will access my company Citrix server. I want to source-pat the user traffic partner company to PIX of my business within the interface to its entry in my LAN to access my company Citrix server. The partner company will be PAT'ing their traffic from users to a single ip address - Let's say for discussion end is 65.99.100.101. There is the site to site vpn configuration, and configure nat be performed to allow this traffic in accordance with the above provisions.

I'm more concerned about the accuracy of the configuration of the domain encryption because NAT is involved in this whole upward. My goal is to NAT (of the other company company a) ip address to a routable ip address in my company network.

The fundamental question here is should I include the ip address of real source (65.99.100.101) of the company the user or IP natted (10.200.11.9) in the field of encryption.

In other words should the encryption field looks like this

OPTION A.

permit ip host 10.200.11.103 65.99.100.101

OR

OPTION B

permit ip host 10.200.11.103 10.200.11.9

I'm inclined to think it should look like OPTION A. Here's the part of MY complete SOCIETY of the VPN configuration. I've also attached a diagram illustrating this topology.

Thanks in advance,

Adil

CONFIG BELOW

------------------------------------------------

#################################################

Object-group Config:

#################################################

the COMPANY_A_NETWORK object-group network

Description company network access my company A firm Citrix

host of the object-Network 65.99.100.101

the MYCOMPANY_CITRIX_FARM object-group network

Description farm Citrix accessible Takata by Genpact

host of the object-Network 10.200.11.103

################################################

Config of encryption:

################################################

crypto ISAKMP policy 20

preshared authentication

3des encryption

sha hash

Group 2

life 86400

********************************

CRYPTO MAP

********************************

crypto Outside_map 561 card matches the address Outside_561_cryptomap

card crypto Outside_map 561 set peer 55.5.245.21

Outside_map 561 transform-set ESP-3DES-SHA crypto card game

********************************

TUNNEL GROUP

********************************

tunnel-group 55.5.245.21 type ipsec-l2l

IPSec-attributes tunnel-group 55.5.245.21

pre-shared-key * 55.5.245.21

*******************************

FIELD OF CRYPTO

*******************************

Outside_561_cryptomap list extended access permitted ip object-group MYCOMPANY_CITRIX_FARM-group of objects COMPANY_A_NETWORK

###########################################

NAT'ing

###########################################

Global (inside) 9 10.200.11.9

NAT (9 genpact_source_nat list of outdoor outdoor access)

genpact_source_nat list extended access permit ip host 65.99.100.101 all

genpact_source_nat list extended access permit ip host 65.99.100.102 all

! For not natting ip address of the Citrix server

Inside_nat0 list extended access permitted ip object-group MYCOMPANY_CITRIX_FARM-group of objects COMPANY_A_NETWORK

You must include pre - nat ip 65.99.x.x in your crypto-card, like you did.

For me, config you provided here looks good and meets your needs.

One thing, I do not see here the nat rule real 0, but there is the ACL that NAT. probably, you just forgot this rule.

65.99.100.101 #sthash.mQm0FIOM.dpuf

Enabling users VPN to the DRC to UAT

ASA 5510. Outside of the NETWORK, connection with real internet card related IP addresses. Inside of the NETWORK adapter connected to the DMZ 172.17.193.0/24 with the address 172.17.193.100.

ISA 2006 SP1. External NIC connected to the DMZ 172.17.193.0/24 with address 172.17.193.1 within NETWORK adapter connected to the UAT 44.44.44.0/24 with the address 44.44.44.109.

After that a VPN user connects to the ASA (Gets an IP from 192.168.20.0/24), I want the VPN user for DRC in 2008 in the 44.44.44.0/24 network server.

I know that I need to enable DRC entering the ISA goal... not sure what I have to do on the SAA.

ciscoasa # sh run

: Saved

:

ASA Version 8.0 (4)

!

ciscoasa hostname

activate the password xxx

passwd xxx

names of

!

interface Ethernet0/0

Speed 100

full duplex

nameif outside

security-level 0

IP address outside_ip 255.255.255.240

!

interface Ethernet0/1

Speed 100

full duplex

nameif inside

security-level 100

IP address 172.17.x.x.255.255.0

!

interface Ethernet0/2

Shutdown

No nameif

no level of security

no ip address

!

interface Ethernet0/3

Shutdown

No nameif

no level of security

no ip address

!

interface Management0/0

nameif management

security-level 100

IP 192.168.1.1 255.255.255.0

management only

!

config to boot Disk0: / exit

passive FTP mode

clock timezone STD - 7

clock to summer time recurring mdt

standard access list split_tunnel_list allow 172.17.193.0 255.255.255.0

access extensive list ip 172.17.193.0 inside_nat0_outbound allow 255.255.255.0 192.168.20.0 255.255.255.0

inbound_on_outside list extended access permit icmp any one

inbound_on_outside list extended access permit tcp any host outside_ip eq 5555

pager lines 24

Enable logging

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

management of MTU 1500

IP local pool vpnuserspool 192.168.20.101 - 192.168.20.254 mask 255.255.255.0

no failover

ICMP unreachable rate-limit 1 burst-size 1

ICMP deny everything outside

ASDM image disk0: / asdm - 613.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 172.17.193.0 255.255.255.0

static (inside, outside) tcp outside_ip 172.17.193.96 5555 5555 netmask 255.255.255.255

Access-group inbound_on_outside in interface outside

Route outside 0.0.0.0 0.0.0.0 isp_gw 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

dynamic-access-policy-registration DfltAccessPolicy

the ssh LOCAL console AAA authentication

Enable http server

http 192.168.20.0 255.255.255.0 inside

http 172.17.193.0 255.255.255.0 inside

http 192.168.1.0 255.255.255.0 management

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-3des esp-md5-hmac firstset

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Crypto-map dynamic dyn1 1 set transform-set firstset

Crypto-map dynamic dyn1 1 lifetime of security association set seconds 28800

Crypto-map dynamic dyn1 kilobytes of life 1 set security-association 4608000

Crypto-map dynamic dyn1 1jeu reverse-road

dynamic mymap 1 dyn1 ipsec-isakmp crypto map

mymap outside crypto map interface

crypto ISAKMP allow outside

crypto ISAKMP policy 1

preshared authentication

3des encryption

sha hash

Group 2

life 43200

Crypto isakmp nat-traversal 3600

Telnet timeout 5

SSH 172.17.193.0 255.255.255.0 inside

SSH 192.168.20.0 255.255.255.0 inside

SSH timeout 60

Console timeout 0

management-access inside

You will also need to route VPN pool to UAT device next to these changes in access list.

ON ASA

Route inside 44.44.44.0 255.255.255.0 172.17.193.1

And the road to VPN pool 192.168.20.0/24 pointing to ASA on ISA device.

If you have no default route on device UAT rear rear peripheral ISA

then you must also define a route for VPN pool 192.168.20.0/24 pointing to ASA on device UAT.

HTH

Sangaré

Pls rate helpful messages

How to activate the two IPS on VCS starter pack express

I have the Starter of Cisco Express works with a single IP address using a NAT. This only works inside the LAN. To enable this machine on the internet, I bought the key option to double network interface. I enabled both interfaces, but I don't know how I should configure the two IPS by access from the internet. I tried to activate the static NAT, but it did not work.

There is only a single default gateway and this is where most of the traffic will be released and which should point to the internet router.

If you have addresses of internall more than 'LAN', you can simply add additional routes via the administration console.

As if LAN is connected to LAN2 192.168.150.0/24 and you 192.168.175.0/24 your home and where your laptops

router for tha is 192.168.150.1 you would add that, on the road to xcommand, add the command:
```
xcommand RouteAdd
*h 'xCommand RouteAdd'
"Adds and configures a new IP route (also known as a static route)."
Address(r): "Specifies an IP address used in conjunction with the prefix length to determine the network to which this route applies."
PrefixLength(r): <1..128> "Specifies the number of bits of the IP address which must match when determining the network to which this route applies. Default: 32"
Gateway(r): "Specifies the IP address of the gateway for this route."
Interface: "Specifies the LAN interface to use for this route. Auto: the VCS will select the most appropriate interface to use. Default: Auto"
```
for the example given, it would be (user admin via ssh):

xcommand road add an address: 192.168.175.0 LG: gateway interface 24 192.168.150.1: LAN2

But to be honest I'm not sure jabbervideo it works well with the highway espress in

a lan environment double anyway.

As with a vcs - c / e deployment you have the model of the internal and external with vcs

different hosts where he tries to get funding and then depending on who gets the data

for the record. It may be that in any case only get you external IP of the vcs-e.

I would therefore simply deploy a DMZ where the outside and inside can reach the starterpack with

the same address or even external ip using a NAT that is hosted in LAN1 put directly on a public ip address in a dmz...

Remove one of the two iTunes I not use in my computer

Windows Vista EDITION Home Premium: in my computer, I have two iTunes programs that the administrator user and the other in a normal users. We do not use the one in the title of the administrator. We only use one of the user. I already checked that all songs in iTunes of the user are located within this user. Can I delete the iTunes of the administrator user program without affecting the program iTunes to another user?

N °

On all versions of Windows, the programs are installed by the administrator and are then available for the rest of the users. If the administrator uninstalls, the program went for everyone.

Solve the two equations of polynomials.

Please visit the Hp - page 7-4 user guide. This shows how to simultaneously solve the two equations X ^ 2 + XY = o and X ^ 2 - Y ^ 2 = - 5 using the function, resolve

I've tried everything.

Thank you

johben

ALG:

[X ^ 2 + X * Y = 10, X ^ 2-Y ^ 2 = - 5]

RPN:

["X ^ 2 + X * Y = 10' ' X ^ 2-Y ^ 2 = - 5 '"]

Newbie user-NAT, PAT, the two PIX?

Similar Questions

Maybe you are looking for