News station using the batch process model

Similar Questions

• Get the context of the sequence of other connectors (active) in the batch processing model

  TestStand 2014 - model updated the batch

  LV2014

  System controls an environmental Chamber and doing trials on 4 of the UUT.  Room Enviromental is the shared resource and is controlled by the synchronization of thread only lot.  A UI TempMonitor of Labview (also synchronized lot) pops up, until you reach the target temperature and soaking time is over (so you can monitor returns to the House and see the amount of time remaining.  It all works fine in the system of warnings in.

  Now, there is a new requirement to take permanently UUT s to ensure that they remain in the State during the temperature ramp and soak period.  The simple answer is to integrate this track in TempMonitor UI because it has access to all relevant data pads.  However, I would need to do an end run around traditional return since it is only run by one of the four (up to).

  My thought is that if I had access to all active sockets sequence contexts, I could ask them their index and State, follow up and write the results to réécrirait a local variable before leaving the user interface.  The only thing that prevents me from going forward, it's that I don't know how to get the engine to give me the sequence for each Active socket contexts (0-3 which may be disabled via the setting ContinueTesting false instead of disable flag, it is a product of use pass 3rd batch of party model, so the executions of people with disabilities are marked as completed when running rather than wait).

  Or, Alternatively, how inspect all executions and to determine what decision he belongs (if necessary, because my data acquisition engine runs in its own, hidden, execution).

  Thanks for any help,

  Mike Webster

  Actually, I was looking for a way to get the SequenceContext for the other active sockets that launched the TempMonitor GUI, so I could put results in the other sockets directly.

  However, I gave it, and instead I am launch the GUI TempMonitor in its own thread and have each socket to monitor the status of USE on its own with a separate VI until what the ramp / soak temperature is how the GUI will highlight Boolean StationGlobal that triggers the individual to continue.  More complicated, but also in the spirit of TestStand to things, I think.

  MKE

• I want to move my hard drive from a computer with a motherboard dead to a newer machine. The activation process for Windows XP SP3 failed.

  I want to move my hard drive from a computer with a motherboard dead to a newer machine.  The activation process failed.  How can I get the operating system XP Professional sp3 reactive?  I have the code original and other info.

  original title: Moving the death machine drive

  Hello CarrolScott,

  The activation problem arose because the hardware on your current computer does not match that of the hardware on the machine whose mother is dead.

  The best option for the reactivation is to use the telephone line. This, unfortunately, is automated and may refuse to turn on your system; However, don't despair just rest on the line after the automated atcivation crossed its procedure and you will be transferred to a real person. Tell this person you've done, and it should be able to help activate.

  See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How can I register my product without using the online process?

  How can I register my product without using the online process?

  He scored finally got.

• Make a new file using the "Save as".

  Bit of feedback to the staff HERE...

  We use LabVIEW 8.6. and, at least in this implementation, trying to make a new VI using the command save as product a menu of choices, including none make sense to me. Sorry, but I can't say which of them will produce only makes a new file with a changed name to be refined. Trial and error product folders, but not files, replaces the original file (why would I do that, I chose save as no record) and about each result other than what I was trying to accomplish.

  May you fix this in a future release, but for 8.6, I feel that I must take a class just to save the new file.

  you're not alone...

  Have you tried "open extra copy?  This is probably what you want.  It will not copy the original and will keep the open source.

• How to upgrade a driver automatically in Windows NT by using the batch file

  I use the devcon tool to update a Windows XP driver, but unfortunately it does not support Windows NT. So I'm looking for a similar tool for Windows NT. Does anyone know any tool / or script that would update a driver via file/command line in Windows NT?

  Thank you for taking the time to read the question.

  Hello supportalcon,

  Thank you for the question!

  It is disheartening to know that have problems you with the Windows Driver. As I understand it, you need to update a driver automatically in Windows NT by using the batch file.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Why not be able to run MRT.exe using the batch file?

  When I run the following script using the batch file, MRT cannot be run.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  off @echo
  C:\WINDOWS\system32\Mrt.exe/q/f

  Hello

  ·         The computer is connected to a domain network?

  ·         What is the error you get when trying to execute the batch file?

  If the computer is connected to a domain network, I suggest you to report this issue in Windows XP IT Pro Forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro

  Thank you.

• How to adjust the volume to specific levels by using the batch file?

  I use Windows Media player and want to adjust the volume level automatically using planning.

  Anyone have any suggestions on how to set the volume level by using the batch file?

  such that 0 is mute and 10 max, I want to set the volume 4

  Thanks in advance for your suggestions

  Eric

  Hi Eric,.

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• How to put windows 7 pro on the new computer using the same key on the side of the other computer

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  Original title: Windows 7 pro

  Tuesday, October 14, 2014 20:31:20 + 0000, 4hammond wrote:

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  You can not, for at least one (and two possible) reasons.

  1. it isn't clean if you want to have two computers, or you
  you want to remove from the old computer and put it on the new. If
  you want once, you can't do that - the rule is very clear: there
  a copy (or a license) for each computer.

  There is nothing new here. This is exactly the same rule that has been in
  effect on all versions of Windows from at least with Windows 3.1.

  2. but even if you want it on a single and from uninstall
  the old computer, you can't do it. It is because if it came with the
  computer, it is an OEM version and the biggest drawback to he a
  OEM version, is that its license it permanently binds to the first
  It is installed on the computer. He can never legally be moved to another
  computer, sold or assigned (except with the original computer).

• I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog update saved on thehard d

  I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help

  He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer

• How can I uninstall a computer and reinstall to a new computer using the same account?

  How can I uninstall a computer and reinstall to a new computer using the same account?

  Hello

  For uninstallation, please use the uninstall program: CC help | Uninstall the creative desktop application Cloud

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• I want to download my old product to a new computer using the serial key

  I want to download my old product to a new computer using the serial key

  Hey randym91310518,

  To download and install the same software on the new machine, you will first need to disable the previous machine, and then turn on again with the same serial key.

  Please note: If you purchased a subscription Acrobat or a single user license, then you can install & activate on computers, for example, your desktop at the office and a laptop at home.

  To know more details about Acrobat & deactivation activation, you may need to go to the below mentioned link:

  Activation & deactivation help

  Hope that helps.

  Let me know.

  Kind regards

  Ana Maria

• I have problems activating dreamweaver on new pc using the original activation code

  I have a copy of StudioMX 2004 and had problems activating Dreamweaver on my new pc using the original code. It is said there is a network error, but it does not exist. When I try to activate by phone number they give is of insurance Lloyd's bank. I did a live chat with Support and they gave me a new code that has worked and enabled Dreamweaver but I didn't activate the fireworks at the same time. When I tried to use the new or the old code, I get the same error message and the same telephone number of Lloyds Bank. I tried the live chat, but they refuse to stop them from saying that they do not support Dreamweaver 2004... one of the ideas?

  Have you seen this page with a number of activation for the old (very old) products?

  http://helpx.Adobe.com/x-productkb/policy-pricing/Macromedia-legacy-activation-error.html

  Are you sure that MX2004 will work on your new operating system?

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• Test of parallelism by using batch processing model

  Hello!

  I am relatively new to TestStand and have a question that seems to have an easy solution, but I can't understand (looked like the examples, forums, etc.)

  We use the model batch (minor modifications for reporting) but all run sequentially and have the template option set to 1 socket. I have 2 tested EHR sharing a room of temporary and 2 4145 s PXI (one for each DUT, using 1 channel as the power supply and the other three channels for the measures). I manage all the instrument in a reminder of ProcessSetup initializationg and jump into the MainSequence once the test is done I'm going in the ProcessCleanup recall and to close all references (we use digital recorders for instruments).

  I want set the template option to have 2 Sockets. So if I put the VI call that sets the temperature at will TestStand "A thread only" two starting sequences and one of them would set the temp and the other would ignore but spend once executed step.  Is there a way to tell TestStand "for USE 0, use SMU1 and USE 1 use SMU2" and go to the next temperature?

  It's a weird situation because all the examples I could find have the problem "more DUT with Instruments" so in my case, it's a problem well have .

  Thanks in advance!

  You can use the expression RunState.TestSocket.Count 0 based.  Use this value to create your EMS chain.

  Pulido Technologies LLC