NFC allows to open my application?

Hello
I'm new on using NFC.
I have so much to read a label and to write to a tag (learned the post official supportforums.blackberry on NFC)
...

However this is question is "how to open my application when the NFC is triggered.
say that I write the following string in my tags "myAppName_ [id]: url = 1".
where "myAppName_ [id]" is unique.

So the problem is that after reading any tag, I have a DIALOGUE BOX WILL pop up that contains the data of the nfc.
is there a way to open my application instead of get this DIALOG box?

same question in terms (sorry because I am not knowing how to express myself as well):
Is it possible to open my app (or bring to foreground to background), after reading and verification (check via myfunction which will ensure that this tag is mine!) the tag (using NFC).

Hello

Yes, using a custom type is a good idea. Note that it is always "NDEF" If... the NDEF format allows you to define your own types. But since no other type will know what you invented, that your application is registered.

BlueTooth scenario is a little different. It's something called transfer of connection. It is triggered by the camera during certain types of message NDEF are produced automatically, and usually the NDEF message is forwarded using the so-called SNEP (Simple NDEF Exchange Protocol) instead of standard tag reading... the difference being that the SNEP is a protocol of peer-to-peer. I don't worry about this if I were you, because I don't think it's important for your goal.

Invent your own type. You need a value type and domain, and then specify when you sign up as a single separate string by a ': ', for example:

com Martin: special_type

If your code might look like this:

ReaderWriterManager nfcManager = ReaderWriterManager.getInstance ();
nfcManager.addNDEFMessageListener (listener,
NDEFRecord.TNF_EXTERNAL, 'com.martin:special_type');

Good luck

Martin

Tags: BlackBerry Developers

Similar Questions

  • Error 0xC000005 when opening an application (rosetta stone)

    Technical support, then the engineers of rosetta stone were stunned about my problem. I get error 0xC000005
    When I try to open the application. I've installed it several times, it ran as administrator and tried to do in compatibility modes.

    Thanks for any thoughts

    Hello

    First of all I suggest you access the link below to start the free online scan and check if the computer is infected with the virus and delete it:

    http://OneCare.live.com/site/en-us/default.html

    Check if you can open the application to the clean boot.

    Follow these steps:

    1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation,
    type the password, or click on continue.)

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7 log on to your account.  If the problem does not reappear when your computer is in clean boot mode, a background program is probably originally
    interference. You can try to determine which background program is causing the problem when the computer is in clean boot mode.

    To find the process or program to cause follow the steps from half of the points Services allow, in the following article:

    Check this link for more information:

    http://support.Microsoft.com/kb/331796

    To restore your Normal startup:

    1. click on Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation,
    type the password, or click continue.)

    2. on the general tab, click Normal startup.

    3. When you are prompted, click restart.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to open my application on another device

    My app should open on a 2nd machine as soon as I open my application on the 1st device and press the two devices together. I understand that there is need of NFC to participate. Any suggestions on how to achieve this? (the application will be to be already installed on both devices)

    Hello

    No need for all of the services without a head. The invocation of the NFC since 10.0 can do what you describe - assuming that the application is installed on both devices.

    In the handle bar, registerv for a specific tag / content type.

    When you type - open application should emulate a tag of the same type.

    Invocation will open the application on the second device to satisfy the request.

    Thank you.

  • Sorry, your subscription free story does not allow access to this application. Please update your subscription.

    I want to use the desktop Adobe Story version, but I can't. I downloaded, but when I open the software wants to connect adobe ID...

    Then, a window like this... Sorry, your subscription free story does not allow access to this application. Please update your subscription.

    I press the button upgrade that I have an error message in this link

    https://www.Adobe.com/cfusion/store/handlers/eLicensing/trialconversion.cfm?locale=EN_US & s ku = 10006855

    I don't know what I have to do... Is also that these must always be difficult!

    Hello

    It helps if you open this link in your browser's private browsing mode and then go further?

  • already have adobe CS6 downloaded on an old mac computer that is now dead, I can't open the application on this computer to turn it off, but I wand to download my CS6 even on my new mac laptop

    already have adobe CS6 downloaded on an old mac computer that is now dead, I can't open the application on this computer to turn it off, but I wand to download my CS6 even on my new mac laptop

    The license allows 2 activations, so you should be able to install on a 2nd computer

    If you receive a message that you have exceeded your activation, you must communicate directly with Adobe

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Serial number and activation support (non - CC)

    http://helpx.Adobe.com/x-productkb/global/Service1.html

  • Allow the opening of attachments not PDF - grey

    I'm trying to find a way to allow the opening of attachments not PDF with external applications of the XI Acrobat Trust Manager settings, but this option is not available to change.

    Is there a preference of group policy that can be set to change this or a registry key to allow opening files not PDF?

    I built the package myself with the Customization Wizard and deliberately do not disable the opening of files not PDF, so that's not all. I found that we had a setting in group policy in place prior to the deployment of Acrobat 11, however. She defined the key 'HKCU\Software\Adobe\Adobe Acrobat\11.0\Originals\bAllowOpenFile' and 'HKCU\Software\Adobe\Adobe Acrobat\11.0\Originals\bSecureOpenFile '. These 2 settings will be as well change the setting and also not allow users to change this setting.

  • Cannot open the application "Mail" because PowerPC applications are no longer supported

    I work on a MacBook Pro mid 2012

    Intel Core i5 2.5 GHz

    OS X El Capitan 10.11.6

    The Mail app suddenly quit and when I tried to resume, I got this message

    "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

    This also happens with the "Maps" app

    All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

    I am confused to say the least. Suggestions? Thank you!

    If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

    Try a reboot.

    Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

    Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

    Isolate a problem by using a different user account

    If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

    Safe mode - on El Capitan

    Start Mode without failure-El Capitan.

  • Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

    I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

    Try to install mode without failure. Hold the SHIFT key while rebooting.

  • I cannot download spotify, said "can't open the application because the PowerPC applications are no longer supported. What can I do?  I can't open spotify after it has been installed, said "could not open application because PowerPC applications are no l

    I cannot download spotify, said "can't open the application because the PowerPC applications are no longer supported. What can I do?

    I can't open spotify after it has been installed, said "can't open the application because the PowerPC applications are no longer supported. What can I do?

    Thank you!

    PowerPC applications have not been supported for many years now since, OS X 10.7.x, you need to look for an alternative to this app or contact the developers of Spotify to see if they have a version for El Capitan 10.11.x

  • Why is that every time I open an application that my phone disconnects from the wifi

    Everytime I open an application that my phone disconnects from the wifi.

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

    Council: https://discussions.apple.com/docs/DOC-9892

  • The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11

    The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11

    Ah, apparently it's reading I wanted as long as home pages; When I reset my homepage it started working right.

    Thank you

  • Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

    Question
    Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

    Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • I may have inadvertently downloaded Firefox 5 instead of 4 and cannot open the application because it is not supported. Can I still download Firefox 4, which I was planning to do?

    I tried to update to Firefox 3 Firefox 4. But, after completing the download and then tried to open the Firefox application, I got a message saying: "Cannot open the application"Firefox"because it is not supported on this architecture." Is it possible that I may have inadvertently downloaded Firefox 5? I do not think that my system support
    Firefox 5. I'm not a geek, so I really appreciated any help you can give me. Thank you.

    For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

    Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • There is a problem when I click on the tab '+' to 'open a new tab' nothing happens. It allows to open new tabs, and now it does nothing.

    There is a problem when I click on the tab '+' to 'open a new tab' nothing happens. It allows to open new tabs, and now it does nothing. Even when I go to 'File' and 'New tab' it still does nothing. The only time wherever I can get a new tab to open is if I go to 'Help' and click "Firefox Help" then opens a new tab with firefox help.

    Please disable or uninstall the extension "Ask Toolbar". He has a known compatibility issue with the latest update of Firefox.

  • I have an invalid jpeg file that appear on my screen. He got there when I moved the files to a new folder. I can't get rid of it and it remains visible even when I'm on the internet or have opened another application.

    I have an invalid jpeg file that appear on my screen. He got there when I moved the files to a new folder. I can't get rid of it and it remains visible even when I'm on the internet or have opened another application. It interferes with the applications and documents. I tried to click on (nothing happens). I have the version 10.9.5, processor speed 2.7 GHz Intel core 15, 8 GB 1600 MHz DDR3 memory.

    Have you tried a re-boot?

Maybe you are looking for