NFS storage and the link 'delete '.
In another thread, I realized that, in order to remove the 'link' between an ESXi host and a NFS server, I have to use "remove".
Above the list of data stores, there is a link called "Delete" (which is between "Refresh" and "add storage... »). What is the use of this link with NFS? Or it is not logical at all?
TIA
From what I see after a few tries, "Delete" with NFS storage does NOT remove the data store, nor its contents. 'delete' is equivalent to 'dismantle' for NFS.
So, IMO, the link is a misnomer: it should be 'unmount' instead of 'delete' when an NFS storage is selected. In other words, a display bug.
Tags: VMware
Similar Questions
-
How to stop opening two windows when I click on an e-mail link, the home page and the link that the two open. I want to just link to open
I deleted cookies and tried to stop this site to open, but it opens, however, how to stop it! I have young children in the House and we don't need that sort of thing...
-
Cannot add the NFS storage to the data device
Hello
I try to add the NFS storage unit of data.
I followed the documentation, and when I ran the script supposed to mount/add NFS storage to the device, an error message indicating that the export is read-only, which is actually not the case:
./Mount-NFS-Store.pl nfs--servername.domain.com:/hzn-data-01
NFS: servername.domain.com:/hzn-data-01
HOST: servername.domain.com
servername.domain.com is alive.
Mount.NFS: deadline set for Fri Mar 8 21:33:13 2013
Mount.NFS: try the options based on the text 'hard, rsize = 32768, wsize = 32768, intr, addr = 128.178.102.59'
Mount.NFS: prog 100003, try around = 3, prot = 6
Mount.NFS: try the port TCP XXX.XXX.XXX.XXX prog 100003 3 prot 2049
Mount.NFS: prog 100005, try around = 3, prot = 17
Mount.NFS: try XXX.XXX.XXX.XXX prog 100005 3 UDP port 1234 prot
ServerName.domain.com:/HZN-Data-01 on/opt/zimbra/store10 type nfs (rw, sync, noatime, hard, rsize is 32768, wsize = 32768, intr)
Error has occurred: directory does not exist or is not writable: / opt/zimbra/store10
zmvolume failed at ligne./mount-nfs-store.pl 49.
Of course, I tried to go to the mount point (in this case/opt/zimbra/store10) and quite capable of writing in it (touch, create the file + dir, etc...).
The data device has root access to the NFS export. I have no idea about the cause of this error.
Any clue?
Thank you very much
Eric
In my view, that ashish ask you to run the following command, so that the folder is owned by the user «zimbra»
chown-r zimbra:zimbra
-
I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?
Have you done something after their show.
-
Some how my email was requested to be removed and the link to verify that I DON'T want be removed takes me to some site randomly, please help.
Your post is a little vague, but I fear that you may have received a phishing e-mail. Please tell us all about this request but do not follow any links or give any information at this stage.
-
Original title: problem e mail
I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.
Suggestions;
1. make sure that your e-mail program is your default program.
2. make sure that your Internet Explorer, or your main browser has all its faults.
You can do both of the above by following these steps...
Start button > right column, click default programs > click Set Your Default programs...
1. click on your e-mail program > it doesn't say "this program has all its defaults"?
If not, click on choose by default for this program > check all boxes below the list > click on save when finished.2 do the same as above for your Internet Explorer, or your main browser.
-
Compilation of FDI: mismatched CPU target between the compiler and the linker
Hello
When I compile my project, it gives an error of link:
G:\bbndk\host_10_0_9_534\win32\x86\usr\bin\ntoarm-ld: src\main.o: relocation in generic ELF (EM: 3)
src\main.o: could not read symbols: file in wrong formatLooking at orders of compilation that I see the files objects created with - V4.6.3, gcc_ntox86_cpp and the linker, try using - V4.6.3, gcc_ntoarmv7le_cpp
If I click with the right button on the project and select Properties, is specifies the target as the ARM v7 and options to the compiler/assembler/linker including - V4.6.3, gcc_ntoarmv7le_cpp, that is correct. But if I right click on the 'src' dir and select properties is said - V4.6.3, gcc_ntox86_cpp, which gives the conflict. Where he does this from?
I tried "Restore default" and change options around, but it didn't fix the problem. Is this a bug? How can I fix the "-V4.6.3, gcc_ntox86_cpp" question? Is there something that I don't see? Do I have to manually edit the .project files to fix the problem?
The version of the IDE is
Version: 10.1.0
Build id: v201302012246Thank you!
Solved my problem. Is go to the cpp files individual and selected "resource Configurations"-> reset by default. Not sure why she chose x 86 front and the change of target does not spread.
-
Remove the link 'delete' on the content information
Someone knows who understand that I have to look to disable the link 'Delete' on the content information page. I want to delete this link for admins.What are your reasons to do as customization (of the web GUI) rather than Setup accordingly security model? You could just remove the permission to remove your non-admin roles: http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/c05_security.htm#BGBFABHE
The advantage of this approach is that it will work even not only Web GUI (but also of SAY, WebDAV, RIDC, WS, but also WebCenter workflows).
-
public network for virtual machines, private storage and the service console?
Hello
So far I had a pretty small facility with 2 servers with 4 physical network adapters each running ESX 3.5, a small box of EqualLogic SAN to shared storage and a few virtual machines on our network of regular reinforcement, routed, not on a private. The network config was really simple. I just put everything on real IP addresses on our network of building.
Now I want to move the SAN and the traffic on a private service console network, but I don't know how to do this.
Right now I use 2 NETWORK cards on each server:
vmnic0 is configured on vSwitch0 and has the network of the VM on it that all my use of VMS to talk to the outside world, and it also has the Service Console that uses Virtual Center and I use ssh to it.
vmnic1 is configured on vSwitch1 and a VMKernel Port and also a Service Console Port for iSCSI Software to talk to my SAN. (never been clear on why both are needed to talk to the SAN, but doctors say they are)
My plan is to set up a vSwitch2 and bind it to vmnic2 and implemented a VMKernel Port and the Service Console Port for software iSCSI on the 10.x.x.x network, set up my new (larger) SAN box on the 10.x.x.x network and simply use Storage vMotion to move virtual machines to the new storage space. As soon as I did this, I would like to not use the Service Console on vSwitch2 and not a Console Service at all on vSwitch0. Is it possible to delete the one on vSwitch0 and just use a new vSwitch2 for Virtual Center and ssh access?
So my proposed configuration would be:
vSwitch0: VM network only, used by the VM guests for oriented public access network, no construction of Network Service Console, linked to vmnic0
vSwitch1: superfluous once I do storage vMotion of everything on my old SAN, will eventually remove and pair vmnic 1 with vmnic0, linked to vmnic1
vSwitch2: VMKernel and Service Console on the network 10.x.x.x, used to access the new SAN, used by Virtual Center to access the ESX, used to SSH in to ESX on private network, associated vmnic2
If it works?
Thank you.
Hello
VMkernel ports cannot live on the same subnet. So if you have 3 vmkernel ports say: vMotion, iSCSI and NFS. You really need 3 subnets. 1 for each vmkernel port.
Otherwise how does he know all send properly?
Best regards
Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
"Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
[url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url] -
I tried to delete some unused programs of my had drive and cleared PC wlidcl.dll How can I get this program for the PC works as before? The PC works now as slow as a snail climbs. What do you suggest me? Thank you
Norman.--
E-mail address is removed from the privacy *.
original title: wlidcl.dll
Hello
I suggest to follow the steps below and check if the problem persists:
Not one:
Uninstall Windows Live essentials followed the procedure described in the link:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Step b:
Download and install Windows Live essential from the link:
-
Interesting question delegate froom:
When setting a storage DRS cluster, is possible to add a specific attribute data stores in a cluster?
Yes. I did a lot of time. VSA data warehouses are simply NFS volumes at the end of the day, & DTS fully supports both NFS & VMFS data stores.
However the licensing question. You need to make sure that you have a license that supports DTS functionality.
Since we are aiming the ASB in small and medium-sized businesses, many of these customers can buy a company more license for DTS.
http://www.VMware.com/products/vSphere/buy/editions_comparison.html
HTH
Cormac
-
How to set the NFS storage using the HA function
HI friends,
How to configure NFS storage to use the HA?
Do all esx hosts, see cluster the same lun, comfiguration files?
Thank you.
You need:
VMkernel for NFS ip Storage
Mount the NFS on each cluster host esx (as shared storage) group so that all ESX hosts see your virtual machines
How to:
Create new Cluster
Edit the Cluster and enable HA for the cluster
For the game from the beginning to 'use the cluster configuration' default virtual machine
Then you're ready to go
Others, I think, someone will add for you...
System engineer
Zen Systems Sdn Bhd
Malaysia
www.no-x.org
-
Preserve the default state and the link using cookies
Hello
I don't know where to post this with the re-design of this forum; It has been a while so please forgive me if this is in the wrong g spot.
I have a very basic link, wrapped in a UL tag.
I use JQuery to give links a color when they are clicked by performing a function Add/Remove class, the status of the connection is more preserved by cookies so if a user returns to a page; It shows which tab they were viewing.
The problem is; It is a single page and I want to set a default link or tab; say one. I don't know how to do this.
That's what I'm looking for to accomplished:
- A user accesses the page and the first link is red (default)
- If the user clicks another link that the link is active and the first link loses its default status
- When the user returns the first link is nolonger by default, that's all that bind the selected user on first visit; This is because this link was Micaela using cookies.
- The first link will ONLY maintain the State by default, if the user deletes his cookies or visits to the page for the first time.
Here's a piece of JQuery, I used to maintain the selected state:
{$(document) .ready (function ()}
var idActive = $.cookie ('cookieActive');
If {(idActive)
$('#'_+_idActive).addClass ('activeLink');
}
$('_ul_li_a').click (function () {}
ID var = $(this) .attr ('id');
$("ul_li_a").removeClass ("activeLink");
$(this) .addClass ("activeLink");
$('cookieActive', id) .cookie.
$.cookie('cookieactive', id, {expires: 10000});
});
});
I guess your jQuery works the way you want, and the only problem is how to define the default value.
In this case, give your default link an ID, such as "default". Then add an else clause of the conditional statement in your jQuery:
If {(idActive)
$('#'_+_idActive).addClass ('activeLink');
} else {}
$('#default').addClass ('activeLink');
}
-
Click on a transparent background on mouseover layer and the link doesn't work is not on
Hello
Here is the link to the page under construction: http://brandprint.businesscatalyst.com/products.html
The link on the square boxes don't work on Firefox, except when the upper part of the box is clicked in the square boxes. In other browsers, links work very well.
Any help is very appreciated.
Thank you.
Your bearing works... because the link, ime that leaves the layers themselves as an option. Add a new layer (above the base layer that everything is on) then place the bearing and test.
-
Confirm the name of the zip and the links to download the app and Server Developer-suite
Hello
I want to learn plsql, oracle forms and reports.
I installed Oracle database 10g (OracleXEUniv)
First of all I want to ask is oracle application server requires to run oracle reports?
and I need oracle developer suite and oracle application server.
I'll download it from the links below. Please confirm the name of zip and links below that is fine or I need another zip.
I have microsoft windows.
Please click the link to download Oracle Developer Suite 10 g:
link
Postal code: (10.1.2.0.2) for Microsoft Windows:
ds_windows_x86_101202_disk1.zip
ds_windows_x86_101202_disk2.zip
-What are the two necessary zip for Developer Suite?
and please also tell what is use of Oracle Business Intelligence tools.
It shows the zip: as_windows_x86_bi_tools_101202.zip
Please click the link to download Oracle application server:
link
Postal code: Oracle SOA Suite 10 g (10.1.3.x) > Microsoft windows: x 86: Disk1 (soa_windows_x86_101310_disk1.zip) and 10.1.3.5.0 (ias_windows_x86_101350.zip)
The two zip is required for the application server?
Thank you.Hello
There is a newer version of forms and reports.
http://www.Oracle.com/technetwork/developer-tools/forms/downloads/index.htmlIf you want 10g for some reason, you can go ahead with the link you provided, you need the 1 and 2. Once you have installed the following developer, its enough for you start with oracle forms and reports.
Concerning
SANAE
Maybe you are looking for
-
Thunderbird is waiting for the completion of the network of e/s
I have Thunderbird running on my computer Windows 10.There is no way I can go back to earlier versions of windows.And it has no option to know the version of Thunderbird for me because Thunderbird keeps by hanging, awaiting the completion of network
-
Check the version of the Flash plugin reports the wrong version
I used Firefox 3.6.3 9 Kubuntu without problem. Since the Kubuntu 10 update is having problems with Firefox. One is the falsh soms sites will hang Firefox after showing the video. I discovered that http://www.mozilla.com/en-US/plugincheck/ again repo
-
external 14.2 iMac SSD upgrade
I have an iMac of end of 2013 with a 1 TB HARD drive. I'm looking to upgrade to an SSD because I believe that the HARD drive is really slow. I will use an external SSD as the startup disk with the existing as disk HARD drive "data". I wrote a questio
-
LabVIEW application and tablet PC with touch screen
I was wondering if someone could help me out here... I'm a bit confused. If I wanted to develop an application in Labview (8.5) to a tablet pc that has a touchscreen either (1) Windows 7 Pro, (2) Windows Vista business edition or (3) Windows Xp Table
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! I can't get the table to load now unless I have change the display of the table and if little, when I do, can hardly see it. Off pop-up thought