Nice fade of substitution effect?

Similar Questions

• Fade in/out effect?

  Hello

  Is it possible to add fade in and out at the beginning / at the end a lot of clips, similar to the way in which I can select all the clips and apply an effect by sequence-> apply default transition to the selection? Yes I know I can use the pen to animate the opacity manually, but there must be a way to manually draw lines for each unique clip? Who's going to take forever. Is there an effect in the effect library that fades in entry/out by manipulating the opacity? I tried all the effects under video-> transitions dissolve, none of them is purely manipulating opacity, rather that they be gradually melted in a solid color (dip in black and white) or discoloration at the same time on a clip and fading in another, similar to cross dissolve them. I need the first clip to falter, then when it disappeared completely from the other fades. Is there a quick way to do it?

  Yes. Is to create a preset with opacity settings. Create a fade by using keyframes, then go to the effect options and right click on the opacity and save a preset for fade in. Go to your effects Panel now and do right click on the anchor of pre-selection and newly created custom selection to point. Then do the same for fade on him affecting anchor at the end of the clip. Then, you can highlight all the clips that you want to add these two presets to and then select both presets and drop them on the clips highlighted and they will apply to all the clips. Hope that makes sense.

• How can I set opacity points in order to achieve a fade on the effect?

  I know how to create a fade in opacity on effect using the "elastic" in the video clip.  I would like to be able to define multiple points of opacity for a clip using the effect controls panel.  This approach is possible?  Thank you.

  If you hold down the ctrl key, you can add keyframes of video.

  http://help.Adobe.com/en_US/PremierePro/CS/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7e74a .html

• cool substitution effect

  I'm trying to get the same effect of reversal of navigation which is shown here:
  
  http://www.savageconstruction.com/
  
  I got so far:
  
  http://accent-mg.com/index.swf
  
  So you see I State "more" to move the word up and the line out, but how do you have the line go and the word down when the mouse leaves the State "over"? And it seems their "rebounds" line slightly when it fully develops, how do I do this?
  
  Thanks in advance,
  b

  Brhaynes75 wrote:
  > I'm trying to get the same effect of reversal of navigation which is shown here:
  >
  > http://www.savageconstruction.com/
  >
  > I got so far:
  >
  > http://accent-mg.com/index.swf
  >
  > So you see I State 'more' up the word and line out.
  > but how you go the line and the word down when the mouse leaves
  > the State of 'more '? And it seems that their line "rebounds" slightly when it expands

  If you like the site you visit, you can not keep in button itself
  because button resets as soon as you move the pointer over the hotspot (area)
  of the button.
  It is the nature of the key, out of our control.

  You must place the animation in music video and just play on roll over.
  You could place the button inside the movie clip to set it off, or you can use the button
  Manager directly on the clip, so he goes to work as MC but behave like button.
  You can use a loop to ensure a good return of interpolation as soon as the user moves
  disable the button/clip.
  Let me explain you about the simple example.

  Make a music video and the Interior of this clip:
  frame 1 stop(); action to prevent it from running
  frame 2, the text animation going up and the line more.
  framework (example) 30 end of the animation
  NOTE! It's only a way animation. No interpolation of return to normal onrollout.
  Explain why in a moment.

  Now, get out of the movie clip timeline, select the clip and press CTRL F3 to open
  the properties panel. Give it the name of the instance "button1".
  We will use the button handler to control the clip and a loop of weft enter to do the interpolation
  to run the roll above and to the rear on the deployment. Using this method instead of making the animation
  in and out to keep smooth tween on a case where if the user quickly leave the button
  before the end of the animation. He will play opposite of the exact frame the user
  He left off the coast.

  Thus, after that you gave the name of the instance on the main timeline places the following measures:

  Button1.onEnterFrame = function() {}
  (fade)? Button1.nextFrame (): button1.prevFrame ();
  };
  Button1.onRollOver = Function () {_root.fade = true ;}
  Button1.onRollOut = Function () {_root.fade = false ;}

  I understand that this may seem easier to me in my head how exactly I would want
  go to this topic and not as easy to materialize, so I made a simple example for you to
  Date of arrival:
  http://flashfugitive.com/stuff/roll_over_out.swf

  d/l
  http://flashfugitive.com/stuff/roll_over_out.fla

  --
  Best regards

  Urami

  --

  !!!!!!! Merry Christmas!
  &
  Happy new year

  
  If you want to send me a message - DO NOT LAUGH at MY ADDRESS
  

• I want to use a custom button photoshop with my composition and have the substitution effect

  I'm trying to put a button in photoshop in a blank publication widget trigger. When I cut an paste the image into the trigger, he loses his robot and switches are no longer the colors during the reversal. It works very well in the composition of the lightbox, but the problem with lightbox composition, is there no working capital options to display click only target. How to work around this problem. I want to have my own custom button with the effect of composition within the cc muse.

  You should check the design layout and defined States for relaxation, if the State is set correctly then it should show the rollover State, but the container target corresponding to the relaxation is on the page, then it could show you the active State not the rollover State.

  Thank you

  Sanjit

• Substitution effect

  Como puedo making el efecto gradient al hacer como reversal is muestra in este sitio:

  I can do the color effect change in gradient as shown on this site:

  http://www.thomaslivigni.com/segmented-faces.html

  is the way to put between el estado tiempo y Normal el estado Rollover?
  Is there a way to set the time between the Normal State and the rollover State?

  Hi Christian,

  Yes, it is possible. You can add the rollover State to an image and a tweak of fill option to achieve the desired result. You can also use the ToolTip to achieve this.

  See you soon,.

  Aish

• How to add a wait or an interval in seconds for the fade in/out effects

  Hello

  I have the following actionscript code, which works fine, but I would wait for a few seconds each image once reached the alpha 100, if you see the example in the header (www.vmortiz.com/index2.htm) what it does, is that the image fades and when it is 100 begins gradual removal, and I want that when he's the alpha 100, keep it for us will say 5 seconds and then it will fade out. Or could you please help to do?

  Square._alpha = 0;
  whichPic = 0;

  _root.onEnterFrame = function() {}
  If (whichPic < 4 & &! fadeIn & &! fadeOut) {}
  fadeOut = true;
  whichPic ++;
  }
  ElseIf (whichPic > = 4) {}
  whichPic = 1;
  }
  If (square._alpha > 10 & & fadeOut) {}
  Square._alpha-= 2;
  }
  If (square._alpha < 10) {}
  loadMovie("..) ("/ images/banner/foto"+whichPic+".jpg", "square");
  fadeOut = false;
  fadeIn = true;
  }
  If (square._alpha < 100 & & is & &! fadeOut) {}
  Square._alpha += 5;
  } else {}
  fadeIn = false;

  }
  };

  Thank you

  Concerning

  I rewrote your code, mainly because having fadeIn and fadeOut that two of operation is not necessary.  It is either fading or it is not, when it is not, it can be considered as gradual expulsion.  Instead, I added a variable named discoloration that helps differentiate when new dependent or deal with the current picture...

  Square._alpha = 0;
  whichPic = 0;
  var fadeIn = true;
  discoloration of the var = false;

  _root.onEnterFrame = doFadingInOut;

  function doFadingInOut() {}
  If (fadeIn &! discoloration) {}
  If (whichPic<4)>
  whichPic ++;
  } else {}
  whichPic = 1;
  }
  loadMovie("..) ("/ images/banner/foto"+whichPic+".jpg", "square");
  discoloration = true;
  }

  {if (fading)}
  {if (FadeIn)}
  If (square._alpha<100 &&="" fadein="" &&="" fading)="">
  Square._alpha += 5;
  } else {}
  Remove _root.onEnterFrame;
  setTimeout (resetEnterFrame, 3000)
  }
  } else {}
  If (square._alpha > 0) {}
  Square._alpha-= 2;
  } else {}
  discoloration = false;
  fadeIn = true;
  }
  }
  }
  }

  function resetEnterFrame() {}
  fadeIn = false;
  _root.onEnterFrame = doFadingInOut;
  }

• How to apply the substitution effect to 1 Menu bar boxes?

  Hi people, I searched and found this issue but no real answer - can be done?

  Can I apply the rollover effect applied to the navigation bar on my site here: http://www.arrowmark.co.nz/web4/index.html for the buttons on a navigation bar on Spry? If so, anyone would be kind enough to tell me how?

  Alternatively, it is easy to add drop down menus to my existing navigation bar?

  Thanks in advance,

  JO

  BoppyW wrote:

  However, I notice that when clicking on or hovering over Feedback, it causes the first line of the page text to drop down. How can I treat it?

  You must include a border white background on the anchor tag (see below), as I said in my previous post. If its White, it's the same color as your page background so that you do not see. That will eliminate the jumping.

  UL. MenuBarHorizontal a
  {
  display: block;
  cursor: pointer;
  background-color: #FFC;
  Padding: 0.5em 0.75em;
  color: #865f36;
  text-decoration: none;
  border-bottom: 5px solid #fff;
  }

• How do you turn off default substitution effect?

  If you look at the example of the HorizontalList here:

  http://www.Adobe.com/LiveDocs/Flex/3/HTML/Help.HTML?content=dpcontrols_3.html

  You will notice that the background turns blue on a default rolling.  How do disable you this effect?

  Hello

  You can use the useRollOver = "false" property.

  http://blog.flexexamples.com/2008/02/01/Disabling-Item-roll-over-highlighting-in-the-Flex-/ datagrid control

• to the substitution effect rallent

  Hi people! Ther s a kind of rallent passage of foto one to two foto in turnaround? peace

  Hello

  Google search for: CSS sprites image

  (links):

  http://www.w3schools.com/CSS/css_image_sprites.asp

  https://CSS-tricks.com/CSS-sprites/

  Stone

• Adobe Muse substitution effect

  Hello, on muse I'm doing an overview of the image, which when turnover shows you the image text?
  Is it possible

  Help, please

  Thank you

  Adam

  Of course, it works. Look at this file:

  https://DL.dropboxusercontent.com/u/7046655/Fade_image_MOD.Muse

  A tip: you save all the 'helpers' a lot of time, if you say from the beginning, what you want to achieve.

  Drop more than peer-to-peer is quite inconvenient.

• Creating a substitution effect that is triggered in the same place but other effects...

  I am creating an interactive map on a Web site and have the image of the map on my page with several points, and a box at the top left where place names have shown. What I want to do is to create hot spots on the points on the card so that when you go over it with the cursor in the box, change the name of the place. Is this possible and how do I do it? Thank you

  The ToolTip Widget of Composition is exactly for purposes like this. Set triggers on your card and your targets can be anywhere. If you want everything in the same place you can stack them.

• expand the Image and set the substitution effect

  Hi all

  I have a couple of images which should do something about the rollOver event

  So, I thought I created my own class and extend the Image, here's what I can think

  package eu.mysite.utils

  {

  Import mx.controls.Image;

  Import mx.controls.Alert;

  public class RollOverImage extends Image

  {

  public Reversal of the var : String = "this._rollOver ()" ;

  public function RollOverImage()

  {

            super () ;

  }

  public function _rollOver():void {}

  mx.controls.Alert.show ("ROLLOVER");

  }

  }

  }

  And the mxml

  < utils:RollOverImage id = "img1" source = «...» » / >

  My RollOverImage does nothing (I want to see the alert) when the mouse passes over the image.

  Any suggestions?

  see you soon

  Hello

  Replace your code file with the below a then it will work fine...

  package eu.mysite.utils
  {
  import flash.events.MouseEvent;
    
  Import mx.controls.Alert;
  Import mx.controls.Image;
  SerializableAttribute public class RollOverImage extends Image
  {
  public void RollOverImage()
  {
  Super();
  this.addEventListener (MouseEvent.ROLL_OVER, onMouseRollOver);
  }
      
  public void onMouseRollOver(event:MouseEvent):void
  {
  mx.controls.Alert.show ("ROLLOVER");
  }

  }

  }

  Thank you

  Jean Claude

• what IE code is in the IMG of riding substitution effect

  Hello
  
  Don't know where to post this, it was the best I could find. Is there a CSS forum on adobe.com?
  
  My problem is very simple, I think. I want to picture boxes that link to larger image files have a black border that changes color when you place on it. I used:
  
  an img {}
  Color: #000000;
  }
  a: hover {img
  color: #DA0000;
  }
  
  to make it work in Firefox. What should I do to make it work in IE?
  
  Thanks for any help.
  

  an img {border: 1px solid black ;}}
  a: hover img {border: 1px solid #DA0000 ;}}

  works in all browsers.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "Thytar" wrote in message
  News:g9mec6$HV4$1@forums. Macromedia.com...
  > Hello,
  >
  > Do not know where to post this, it was the best I could find.
  > Is
  > there a CSS forum on adobe.com?
  >
  > My problem is very simple, I think. I want to picture boxes that
  > link to
  > larger image files have a black border that changes color when you place the cursor
  > on
  > it. I used:
  >
  > an img {}
  > color: #000000;
  > }
  > a: hover {img
  > color: #DA0000;
  > }
  >
  > to make it work in Firefox. What should I do to make it work in IE?
  >
  > Thanks for any help.
  >
  >

• Open a popup with fade effect

  Hello

  I have a scenario where I want to open a pop-up window title with a nice effect.

  Can you please how do I do this?

  I have a Repeater which repeats all text UI comps and I want to show a pop up window on MouseOver or click of the mouse to each of these compositions of text UI.

  Help, please.

  Thank you

  Amey

  If you want to open a window with a fade effect title gently there are several possible ways.

  1 declare the melted effect

  2. run the fade on openening effect

  2.1 the effect according to the PopUpManager.addPopUp start

  PopUpManager.addPopUp (_titleWindow, this);
  windowFade.play ();

  2.2 the effect of added event start

  protected function titlewindow1_addedHandler(event:Event):void
  {

  windowFade.play ();

  }

  3. make sure the effect is stopped before starting the animation with windowFade.stop)