Nikon Transfer

Similar Questions

• Nikon transfer program was working properly, now, the program closes as soon as I start the transfer

  A couple of days, this Nikon transfer program work properly. Today, as soon as I started the transfer, microsoft has closed the program with the message microsoft would let me know if he discovered the solution to the problem.  I went online for Nikon and downloaded a newer version. Exactly the same problem.   I tried the troubleshooting suggestions to change the compatibility settings, but have only made in the resolution of the problems...  I suspect an update can be installed on my computer which is now program inconsistent, but I don't have an idea what to do or where to start. Help.

  Hi Gary,.

  Could answer you the question:

  ·         The problem is specific to the only Nikon transfer?

  You can check the obtained updates installed on the computer by following the steps in the article.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows7/see-which-Windows-updates-are-installed

  If the question is limited to Nikon transfer then I suggest you to contact Nikon support for assistance.

  http://www.nikonusa.com/en/service-and-support/product-support.page

  Get back to us with the number of KB updates.

• Import files Nikon Transfer 1.0

  I'm evaluating 5.3 of Lightroom.  I want to import files from a Nikon D800.  I was able to import photos directly from camera memory card, but I was not able to import the photos I already transferred from the memory card to my hard drive using Nikon Transfer 1.0 program.  Is it possible to get these files to import into Lightroom?

  JimHess wrote:

  I think that Rob Cole has access to something that will correct your images. I hope that he will see this and follow up.

  Phil Harvey wrote a Fixer:

  http://www.SNO.PHY.queensu.ca/~Phil/ExifTool/

  (utility app at the top).

  ~ R.

• Older versions of Nikon Transfer will damage the D600 files

  As I have done for years I shoot in RAW and Nikon transfer allows to load the images from the card to my laptop and an external hard drive.  After that I have to sort the images by subject I import them into Lightroom for the final touch.  Not the same with Lightroom 4.2 and Nikon D600... Adobe indicates whether yousue transfer 4.2 will not recognize the files and so much worse... as a company they are going downhill... I hope they fix the problem so I can import 1500 images in Lightroom to the final conversion. It's a shame that they don't care.

  all the solutions to the import problem would be greatly appreciated...

  Title of the message was edited by: Brett N

  Here is an article that explains the problem of corruption with older Nikon software:

  http://www.PetaPixel.com/2012/06/13/warning-older-Nikon-software-may-corrupt-raw-files/

  Here is a utility that will fix D4 and D800/D800E files, so it CAN WORK on your D600 files.  Please try and report back:

  http://OWL.PHY.queensu.ca/~Phil/ExifTool/fix_corrupted_nef.html

• Impossible to import downloaded in Nikon Transfer of D4 in LR 4.3 Raw images

  I get the error next message "files are not recognized by the raw format support in Lightroom (242)" using 64-bit windows 8 with the same problem in Photoshop CS6

  http://OWL.PHY.queensu.ca/~Phil/ExifTool/fix_corrupted_nef.html

  Check this solution EXIFTOOL.  This could help.

• How to use Lightroom 5 [was: 6] associated with transfer. Files WAV for VISIBLE display next to my Nikon D4s ships?

  Please help me. The ability to make this crucial for my workflow as a journalist and columnist.

  Today, I discovered that I have a serious problem when I tried to use Lightroom 5 to transfer my RAW images and their associates. WAV files on my memory card from Nikon D4s. I did a search online and found that a Canon user has this same problem:

  The part passing through the transfer of a message box appears on the screen saying: "some functions of import was performed. These files are not photos or videos,"followed by a list of all the. WAV files.

  I rely on these audio files to remind me of things I need to know for my column regarding the associated photos. Sometimes I even use these short audio files to record the sound effects.

  I use a Mac with the new OS of Yosemite.

  I like the fact that Lightroom does not destructive with regard to editing the addition of description and other metadata, as opposed to Nikon transfer which apparently make "destructive editing", but I use Nikon transfer 2 and, before that, the previous versions of this program for years. I've never had a problem with corrupted due to the process of transferring pictures. There is a drawback to me Lightroom 5.

  Certainly, many, if not most, people at Adobe using Canon and Nikon DSLR cameras, so why they would allow such a serious flaw in Lightroom 5?

  Am I missing a step which will eliminate this problem or there at - it a solution for this?

  Thank you for your help.

  The problem is that my workflow, I have to see that there is an audio file that I quickly browse the photos at the bottom of the screen 5 Lightroom.

  Unfortunately, it is not integrated into LR sort that allows you to do - the metadata Panel is the only place where you will see if there is an associated WAV file.  However, you can use the Data Explorer plugins or no matter what filter quickly filter photos do or don't have WAV files.

• Why nikon view nx2 does not work with El Capitan, and what can be done to remedy this?

  Why software nikon transfer 2 no longer work after upgrading my operating system of El Capitan iMac?

  Get in touch w/Nikon tech support and ask them.

  

• Nikon is not compatible with El Capitan

  Hello

  I hope someone can help me with this...

  I have a Nikon D3200. I just got a new Macbook Air with El Capitan, and he didn't have problems trying to use the two together.

  I could not install View NX2, who, after some research, I discovered is a common problem with El Capitan. I found links on other threads that led me to download View NX - i and another link to download View NX2. It seems that View NX2 is now installed, but when I connect my Nikon, it is not recognized. In fact, I have another point and shoot Nikon camera and it does not seem to recognize that no more. Problem is that I can not even use Photos as the importer on my Macbook Air because my camera just is not recognized at all.

  Side note: I have connected my D3200 to my old Macbook that runs on Yosemite. View NX2 and Photos seem to work well with the import of images. They both open up when the camera is connected. But I did not have enough space on this laptop to import the pictures anyway...

  On another thread regarding this issue, the user spoke using the Image Capture to import the photos. BUT my camera is not recognized by the Image Capture either...

  I'm not sure this is a Nikon problem, or a problem of iOS with El Capitan compatibility - I foresee contacting me Nikon too.

  Thank you!

  I also have a D3200 and it can connect with the latest versions of NX - i, of Apple's Image Capture (found in Applications),

  Photos (I've disabled this) and Adobe Lightroom.  with the exception of the pictures, they don't open automatically.  It comes

  with 10.11.2 of an end 2013 27 "iMac to start 2011 13" Macbook Pro.

  Select this check box, plug in the camera and then turn it on.  Then in the Apple menu, click about this Mac...

  Then click on the system status button.  On the left side of the box of the report, expand the material (if it isn't already)

  then select USB.  You should see somewhere under the tree of the camera "NIKON DSC D3200".

  

  If this is not the case, there may be a few odd hardware problem.

  That's what I get with transfer of images (nothing to camera when I did):

  

  With Nikon Transfer 2 provided with NX - i:

  

  And just to smile and laugh:

  

  So the connections work, just need to understand why it does not work on your Macbook Air.

  NX2 is borked and will probably never get it fixed because it is replaced by NX - i.

  You must also remove all Nikon software and re-install NX - i.

  Also check the version of the firmware on the camera. Mine are listed as C-> 1.04 and L-> 2.009.

• Computer hangs during the transfer of 16 jpeg files.

  Recently, I replaced my Toshiba Satellite M40 PATA hard drive and reinstalled Windows XP SP3.  Subsequently, I find transfer more than 16 jpeg files (approx. 1 MB each) at the same time causes the computer freezes.  I have to shut down the computer and restart and sometimes the computer is 'always' Hung/frozen after restarting Windows (mouse move no keys, ctrl + alt + delete work does produce no action) which necessitated my stop down and restart the computer again.

  This problem occurs during various methods of transfer-to transfer pictures from my card SD using the scanner and camera or Nikon transfer software, trying to copy and paste pictures from the SD in an empty folder, and the problem occurs even when I try to spend more than 16 images from a folder in another.  I tried to transfer images from a folder with the computer in safe mode and the problem occurs when I try to transfer a little more than 16 images at once.  (my SD card, has about 60 images on that.)  There is no error message or any other message - the computer simply crashes.

  I did not have this problem before reinstalling XP.  There seems to be no limit to the size of the transfer that I could perform. I can't wait to find out how I can remedy this problem.  I am familiar with writing code, check the registry, etc, but I'm good enough following the simple procedures.  Thank you for your help.

  Original title: file transfer causes XP to hang, no error message

  Hi RobertMorouney,

  Thanks for posting in the Microsoft Community.

  In addition, how are you doing today?

  You have a problem with the computer hung on the transfer of files on Windows XP. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team and try to get this fixed number.

  Method 1-

  Step 1-

  Trying to transfer files in Mode without failure.

  Check out the link-

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Note: Make sure that you get the computer back to Normal Mode after performing all the troubleshooting steps.

  Proceed to step 2, if the problem does not occur in Mode without failure.

  Step 2-

  I recommend you perform the clean boot.

  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Make sure that get you the computer to a Normal startup after performing all the troubleshooting steps.

  Method 2-

  I wish that you run a Chkdsk command on the computer.

  Check out the link-

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265#Method1

  Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these sectors may be lost. The computer could go to a State no boot as well. Proceed at your own risk.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Magic of the network stops nikon software to run!

  seems I find more problems with this software of each and everyday... it's slow (a lot) of vista ultimate 64 bit stop but is not only also in conflict with Nikon browser that many of us, the photographers use...

  http://support.nikontech.com/app/answers/detail/A_ID/14412/related/1/session/L2F2LzEvc2lkLy1iTjhrdEF...

  Why ViewNX install on my Vista system?

  all my nikon software works very well... I spent what network magic pro is a joke. 5.5.9118-2 version which I believe is latest non-beta (I do no beta versions).

  a poorly written piece of software should be free based on questions I see users having with it, including me. I would prefer linksys previous installation that does not push software on users, noway nohow I think network magic is anything but a piece of cheap buggy software that cisco should be embarrassed for sale. Although I love the linksys products this purchase/coupling with the magic of the network can rely on the software is best available.

  Thank you to offer help and appreciate it. forums are great places to help a user who IMO is most of the time better than the software company complained.

  have a puget computer systems built on platform i7 specifically for photography work and have it run without problem (vista 64 reliabiliity monitor tool on average 9.71) I don't keep Network Magic is I've not found anything easier to add computers to our network with and I do often enough to keep unfortunetly. Nothing beats a simple usb memory key to install all the settings on the computer or laptop and not have to install network magic on those computers. But having to keep on a principal which is mine.

  on xp with previous wrt54v3, I have no problems everything manually and not install the software at all do I like to do. I don't know if it's the ipv6 stack or changing the linksys web page interface, but I had trouble keeping xp on network constantly computers without using Network Magic to load as indicated above. for this reason that I keep.

  the original message was anticipated to the top and ' rant ' from me to other users.

  Thanks to all those who offered help I appreciate it as well as knowledge.

  don't ever put my info because did not ask for help I did was cut and paste the viewNX help point I found on the website of nikon. Nikon has a very good software for their dslr I use with my D700, nikon transfer, viewNX and capture NX2.2.

  I7 - 940 with vista ultimate 64-bit running. comcast cable (the premium level is very fast) wired to my box which is main and various laptops around the House (4) running XP pro 32 bit or 64 bit of vista or XP 32-bit home premium family who all connect wirelessly. a firewall with the windows firewall, which I have never had a problem with at all. NAV 2009 now that symantec has obtained index and is back for a compact and a good proggy that works, just simply. It took them 5 years, but they have listened to their customers... Finally. using linksys wrt54g2 V1... previously had wrt54g V3 with latest firmware should be was not the latter.

• Transfer of photo - camera to the computer

  Camera Nikon P80 - Dell XPS 400 recently upgraded from XP to Windows 7 primary 2013 on newly installed SSD company.  With XP, USB connection plugging in and put in the camera market launched pop-up with options to transfer.  I've also already also used Nikon; s transfer program.  With Windows 7, I hear 3 beeps, but nothing appears - or appears an icon of the camera.  Looking for answers, I found information that the camera cannot be installed because the software was outdated - or corrupted.  By clicking on update for the software, the scoring was that my software was already up to date.  I then downloaded the latest version of Nikon Transfer and even installed successfully.  Retrying the connection, produces the same story - I get the three sounds indicating apparently fail to recognize the device, and nothing not associated with the camera appears.  Any advice will be appreciated.

  Camera Nikon P80 - Dell XPS 400 recently upgraded from XP to Windows 7 primary 2013 on newly installed SSD company.  With XP, USB connection plugging in and put in the camera market launched pop-up with options to transfer.  I've also already also used Nikon; s transfer program.  With Windows 7, I hear 3 beeps, but nothing appears - or appears an icon of the camera.  Looking for answers, I found information that the camera cannot be installed because the software was outdated - or corrupted.  By clicking on update for the software, the scoring was that my software was already up to date.  I then downloaded the latest version of Nikon Transfer and even installed successfully.  Retrying the connection, produces the same story - I get the three sounds indicating apparently fail to recognize the device, and nothing not associated with the camera appears.  Any advice will be appreciated.

  ==========================================
  The following items may be worth a visit:

  Windows 7 - camera connection problems
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  Windows 7 - How to make photos from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  Windows 7 - install a device (camera)
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Windows 7 - working with the scanner and Camera Installation Wizard
  http://Windows.Microsoft.com/en-AU/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

  And it may be interesting to try to adjust your AutoPlay settings.

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

  If you have external or internal drive, you may be
  able to remove the memory card from the camera and download it
  starting from this one.

  When the card is inserted... If you go to... Start / computer... is
  player card on one or several removable disks?

  If_Yes_you can download photos from there. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the photos to a folder on your hard drive.

• DNG converter NEF with Nikon 5500 files does not work

  Hello

  hope it's someone who can help me. I have a new Nikon D5500, but Lightroom 5. As it is not compatible, I use the DNG Converter to convert my NEF files to DNG, so I can use it in Lightroom 5. I converted the files two days ago, but since today the DNG Converter does not detect my NEF files in the corresponding folder.

  Also, I tried to update the compatibility mode that I have Windows 8, but even if it does not work.

  Any idea? I would appreciate answers I want to prepare the photos of my sister's wedding.

  Thank you so much in advance.

  Concerning

  Matthas

  A common mistake that you are probably aware of, is that the DNG Converter works at the FILE level. In other words, in the DNG Converter, you choose the file, but you do not open this folder. If you have selected the folder, but are still having the problem, then another consideration would be the software that was used to download the images. Some versions of Nikon Transfer seem to influence the NEF files that Adobe software cannot read. If none of these problems relate to your situation, please explain what is different about these NEF files from the previous that you were able to convert.

• NAVE of Nikon 3200 files not supported in Lightroom CC

  I have Lightroom 2015.6 (updated) version with Camera Raw 9.6. I am importing my Nikon 3200 RAW files, but they are showing up not supported! How can I fix it? I was not able to use the RAW files, since I got my D3200.

  Nikon Transfer is the culprit. You may not use this software to download your images. Try to import them directly into Lightroom using Lightroom.

• Cannot open the NEF in Nikon D7100 with CS5 or DNG Converter files

  I installed CS5.1 and it shows that Camera Raw is to 6.7.0.339.  I have a Nikon D7100 Camera Raw of 7.4, requiring that I downloaded and run the installer with no apparent error.  PS still shows that CR is at 6.7.0.339.  Then... I downloaded the DNG Converter - latest 9.6.   When I open and navigate to a folder where I have a bunch of files the D7100 NAVE it gives a message that says "the source folder does not contain any supported camera raw files.  I thought the idea of the DNG Converter to convert the NEF files in a 'standard' DNG, but I can't even it works.  I know that the folder contains the D7100 NEF files.  What I am doing wrong?

  Did you by chance use other software to get the files from your camera to your computer like Nikon transfer? Thus is known to corrupt the raw during the shots.

  If so this link should fix. You don't need to use because you can use the card reader to move them from the camera to your computer. If I am barking the wrong tree I'm sorry, it looks that you select the folder and not individual files from your description, that is good to do.

  Difficulty of the corrupted Nikon NEF Images

  Good lick

• Why don't CC with Lightroom and Photoshop CC open my D7200 Nikon raw files?

  I just subscribe to creative cloud (photography) because the listed site support raw Nikon D7200 for versions CC with Lightroom and Photoshop files.

  But after their installation, they will not open the NEF files.

  I downloaded and installed the latest version of Camera Raw, but I can not always open the raw files.

  Frank

  OK, I just discover another discussion that my problem was caused by Nikon Transfer.

  I had been using the version of Nikon Transfer, I had with my previous camera, which apparently corrupts a D7200 Nikon raw files.

  I have transferred my images (using Lightroom) and NEF files open fine in Lightroom and Photoshop.

  Thank you

  Frank