NMI: parity check/memory parity error - how to fix? Laptop VYE

Similar Questions

• NMI:Parity error blue screen

  I have problem with blue screen with any program at any time. It is as it should be a hardware problem. When I run the Diagnostics on my computer everything seems to check out OK.

  Hello drichardson3,

  ·         You get this error blue screen randomly on your computer?

  ·         What exactly is the diagnostic test that you have run on the computer?

  The checking of NMI Parity error is an error related to a defective hardware on your computer. This is mainly caused by a faulty RAM.

  To resolve this problem, you may need to check on the RAM, I suggest you contact the manufacturer of your computer to check the hardware that does not work properly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• With PCI-6229 NMI Parity error

  Currently, I'm trying to get a PCI-6229 to work with one of our lab computers. We'll use LabVIEW 8.5.1 with DAQmx 6.7.1 to program the card. Using our measurement VI owner, the computer will crash at some point (not really in reproducible way) with a blue screen saying "NMI: Parity Check / Memory parity error. All the tests of auto and examples of NOR (delivered with LabVIEW) perform well however.

  Most likely, this problem is not a RAM issue (MemTest I tried, different memory chips, different memory banks). Also, the PCI computer bus works very well otherwise (for any other acquisition cards for example). Annoying enough, the card seems to do a great job in an old and slow computer. Which is maybe something to look at? Or are there other ideas?
  Our workplace is a Fujitsu-Siemens of Celsius M460 with BIOS version 6.00 rel. 1.09 running Windows XP (32-bit version). The software to use with the card is LabVIEW 8.5.1 with DAQmx 6.7.1.

  Dear Lutz,

  I could reproduce the blue screen, and
  changed your program in order to avoid the race condition. What is
  actually happens is you want 2 tasks over time the
  AOSampleClock as a source before the task of AO started.

  When
  programming as in the example I sent you (see attachment VI), you
  shouldn't deal with this blue screen problem more. However, I recognize
  that such a thing should not happen even when it's 'bad' programming... I'm going to
  inform the development so that it will be corrected with the next DAQmx
  version of the driver.

  Merry Christmas,

  P. Lawrence

  National Instruments

• Hardware malfunction: NMI Parity error

  Screen blue/hardware malfunction/call your provider of support material / parity memory check error / NMI:parity / this happens more frequently

  The RAM in your computer seems to be failing. Run the memory in memory diagnostic tool by typing in the search box of the start menu by pressing Enter.

  Use the scanner on this site http://www.crucial.com/ to find out what type of memory, you have to buy if it needs to be replaced.

• The Windows experience index error how to fix (invalid memory access settings)

  I perform index windows as usual and at the end it stops giving me an error and I guess a few months ago it was working fine.
  It stops when the memory test near the end gives the error: impossible to properly assess the disc. The parameter is incorrect.
  If anyone knows what it means and how to fix it please REPLY
  Windows 7 Edition home premium
  AMD athlon 64 x 2 dual core 4600 + 2.40 ghz processcer
  4g RAM
  32 bit
  HP Pavilion

  Hello karimer7,

  Thanks for the return of the response.  Please check the various points listed in the thread below.  There are different options that work for some and not for others.

  Error Windows Experience Index "impossible to properly assess the disc. The parameter is incorrect ".

  Please let us know status.

  Thank you

  James

• Can't rip CD get message80070057 error how to fix

  I have problems to extract music from a CD, I used to work fine now, I get the error 80070057. How to fix it.

  Hello

  · What version of windows media player installed on the computer?

  · Do you have any third-party CD ripping software installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  · Is the behavior with a particular CD?

  a. try the steps and check them out below:

  b. open windows MediaPlayer

  c. click on tools and then click Options.

  d. click the devices tab.

  e. Select Player CD CDudio, and then click Properties.

  f. place a check next to 'Digital' and 'user Error Correction.

  g. click on apply and then click Ok and check the status of the issue.

  You can also view: Rip CD on your computer: http://www.microsoft.com/windowsxp/using/windowsmediaplayer/getstarted/ripcd.mspx

• Window: The system has recovered from a serious error - how to fix this?

  The system has recovered from a serious error - continues to appear on my screen when I start.

  Error reports

  C:\DOCUME~1\Owner\Locals~1\Temp\WER4b86.dir00\Mini07291-01.dmp

  C:\DOCUME~1\Owner\Locals~1\Temp\WER4b86.dir00\sysdata. XML

  BCCode: 100000d 1 BCP1: 443230B 3 BCP2: 00000002 BCP3: 00000000 BCP4: F8568256 OSVer: _1_2600 SP: 3_0 product: 768_1

  What is happening and how to fix this?

  Take a look at your event viewer for more information. To access it, go to start, run, type msconfig and press ENTER.

  A new dialog box will appear. Click the Tools tab and find the event viewer.

• Whenever I try to update windows Vista, I get error 8E5E0408 and 0x8000FFFF error how to fix?

  Every time I try to update windows Vista, I get error 8E5E0408 and error 0x8000FFFF. What are the mistakes and how to fix?

  0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414>

• 57th error how to fix this?

  Since last summer when I get updates, they failed because of an error of 57F.  I couldn't understand why so I looked on google and found some information, but nothing has worked.  I can't find anyone who knows how to fix.  And a lot of people were not able to be.

  Let us know what the problem is.

  Denise

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Movie compilation error, how to fix a corrupted file?

  So, I work with Adobe first CC, and it has not been able to export, always saying "error compiling Movie, unknown error". After days of searching through these tips of countless people with the same problem and no solution, I landed on the question being there which is "damaged", there is a clip... So, I give everything and it stops, give me the same error message on which I guess is the damaged element. Well, I found it. But for me, it seems to be nothing wrong with it. I can't just walk out the film, how this file even become "damaged" and how to fix it?

  Update for anyone who runs into this problem. What I ended up doing is to find each clip "damaged" (I surrender all and it stops, give me the same error message on which I guess is the damaged clip). I had damaged about 10 clips in a 90-minute film. I typed in the name of the file and everyone in my backup hard drive, copied to the disc I store the files I use Adobe and rename each file (personally I just use the same name and add "2" at the end). Then I did slide the clip renamed on the timeline. I didn't waste time to find out exactly how I cut each clip so I pulled the clip up to V2, drawn to its original length, matched that with the file renamed, removed the damaged file, resized a new space damaged the damaged one busy and I was able to add a stabilizer of string to it and it has made and exported without problem.

• Apps of level autocofing supplementing with errors, how to fix?

  Hello
  We have only one node EBS R12.0.6. Since the last 2 months whenever I try to level apps "autocong", it ends with errors and AS services are not restart. Copy the .env file and restart services AS due. How to fix?
  
  SR created in support of oracle, but so far no action plan?
  
  Any help!
  
  Concerning
  Fatiha

  Hello

  Since when this error is coming... have you applied the fixes? view the log of automatic configuration file.

  This has already been suggested/requested above.

  Kind regards
  Hussein

• If I find a mistake in the console error how to fix?

  I get this:
  WARNING: Unknown property 'box-shadow '. Declaration dropped.
  Source file: https://support.mozilla.com/media/css/common-min.css?build=7b235bc
  Line: 1

  and also:
  WARNING: Error in parsing the value of 'background-image '. Declaration dropped.
  Source file: https://support.mozilla.com/en-US/questions/new?product=desktop & category = d6 & search = if + i + find + error + in + error + console + how + do + i + fix + it % 3F % 3F #ask - search - form
  Line: 0

  Many sites display errors in the error console, but they can be ignored. Errors you mentioned in the first post for example can be ignored.

  If you find that Firefox runs slowly, check if an add-on is causing problems. To start Firefox in Firefox Firefox to solve the issues in Safe Mode safe mode, this will disable the modules and can be used to see if it is causing problems. If it works fine in safe mode, follow the procedure described in article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

• After the crash of the system, Workstation 10 reports "not enough physical memory is available" - how to fix?

  On a Windows Pro 8.1 with 32 GB memory main system, I was running three virtual machines on 10 workstation.  Then we had a power failure and the system crashed.  Once the power was back and I restarted, any attempt to run a virtual machine failed with the following (change numbers) message:

  Not enough physical memory is available to power on this virtual machine with its configured settings.

  To solve this problem, decrease the size of this virtual machine to 988 MB memory, increase the amount of physical memory for all the virtual machines to 1219 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap.

  This occurs if the virtual computer, I try to start is one of those that was going or who was not working at the time of the accident.  In this case if I am as an administrator or not.

  I checked Edit/Preferences/memory, and reserved memory is set to 24480 MB - 24 GB.  Can I run a virtual machine if I set the memory size to below the value indicated in the message (in this case, 988 MB).  Of course, I don't want to run like that!

  The Windows System Control Panel reports (almost) complete 32 GB system memory. Task Manager indicates that only 7% of close to 32 GB is in use.  "About VMware Workstation", reports 32640 MB.

  How can I fix it?  I'm basically dead in the water.

  Bob

  You may encounter the same problem that others have reported in this other thread: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation

  Try the workaround it and see if it helps.

  --

  Darius

• A run-time-error, how to fix

  "I write a function to return a pointer of type float64 and assign the pointer to my defined Pionter 'newdata' in my StartCallBack, there is no error, but when I USE"

  DAQmxWriteAnalogF64 (gtaskhandle0, leng [0])<=leng[1]?2*leng[0]:2*leng[1], 0,="" 10.0,="" daqmx_val_groupbyscannumber,="" newdata,="" &written,="">

  I receive a run-time-error like this: "work.c", line 231, col 121, id thread 0x00007FB4: Array too small argument (40000000 bytes).  Argument must contain at least 80000000 bytes (10000000 items). Why does this happen?

  My part code:

  DAQmxCreateTask ("", & gtaskhandle0 ");
  DAQmxCreateAOVoltageChan (gtaskhandle0, ' Dev1 / ao0:1 ', ' ',-10,0, 10.0, DAQmx_Val_Volts, "");
  DAQmxSetTimingAttribute (gtaskhandle0, DAQmx_SampClk_Rate, 1000/looptime);
  DAQmxCfgSampClkTiming(gtaskhandle0,"",1000/looptime,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,leng[0]+leng[1]);
  DAQmxRegisterDoneEvent(gtaskhandle0,0,DoneCallback,);
  DAQmxWriteAnalogF64 (gtaskhandle0, leng [0])<=leng[1]?2*leng[0]:2*leng[1], 0,="" 10.0,="" daqmx_val_groupbychannel,="" newdata,="" &written,="">
  SetCtrlAttribute (panelHandle, PANEL_REALWRITE, ATTR_CTRL_VAL, (double) written);
  DAQmxStartTask (gtaskhandle0);

  From the code, we cannot see how many samples do you expect to write but there are two aspects to consider.

  DAQmxWriteAnalogF64 expects to receive the number of samples per channel to write; in other words, your "2 *" in the function call is probably wrong. See here for the function. This can cause the error you receive, because the length of the array does not match the settings (you probably want to write 5 million samples per channel).

  Second aspect, it seems to me that your function is the production of the final table with samples interleaved (i.e. array1 [0], array2 [0], array array1 [1], array2 [1]... [n-1] array1, array2 [n-1]). If this is true, you must pass the DAQmx_Val_GroupByScanNumber in the function call.

• Photosmart c309n printhead error, how to fix?

  I cleaned the print head by following the instructions.  I was amazed by the amoi = unt of ink that was accumulated.  However, it did not work.

  Are there any other suggestions for cleaning.

  HP cannot find my serial number and the product ID number drop-down list.

  I can't find how much a replacement printhead.

  The HP website is all the worse that I met.

  This document has different numbers of parts for your printer.

  It seems that the part number for the print head is CN642A.

  The part store should allow you to order parts.  Sure just the right country or a region is selected.  If the site is default to one country other than your own, you can change this by clicking on the country at the top right of the page.

  I did a check, and it was $35,93 before taxes and shipment to the United States.  Price will vary from one country to the other.