No access to obtaining the NSDK site error

Similar Questions

• ASA Site, Remote Site cannot access DMZ to the Hub site

  So I've been scratching my head and I just can't visualize what I what and how I want to do.

  Here is the overview of my network:

  Headquarters: ASA 5505

  Site1: ASA 5505

  Site2: ASA 5505

  Training3: ASA 5505

  All Sites are connected L2L to the location of the Headquarters with VPN Site to Site.

  Since the HQ site I can ping each location by satellite, and each satellite location I can ping the HQ site. I will also mention that all other traffic is also correctly.

  Here's my number: HQ site, I have a DMZ set up with a web/mail server. This mail/web server is accessible from my HQ LAN, but not from the satellite location. I need allow that.

  What should I do?

  My second question is that I want for satellite sites to see networks of eachother. I should create a VPN network between sites, or can this be solved in the same way that the question of the DMZ?

  I enclose the show run from my ASA HQ

  See the race HQ ASA

  For the mail/web server that requires access on the remote site VPN tunnels, you must add the servers to the acl crypto, similar to the way you have it for network access. Make sure that both parties have the ACL in mirror. If you're natting from the DMZ to the outside, make sure you create an exemption from nat from the dmz to the outside for VPN traffic.

  For the second question, because you have only three sites, I would recommend creating a tunnel from site to site between two satellite sites.

  HTH

  PS. If you found this post useful, please note it.

• Using a GUI API I got on the blackberry site - error: "tried of BlackBerry to access the api secure."

  Hello
  This is so the API, I downloaded and imported into my project->
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

  When I run it, I get "Error trying to access the api Module secure"

  It says its taken in charge for OS 4.2 and I think, so execute me on my blackberry 9900 OS 5 should work,
  I've been on these forums before and after the solutions, I ordered the signature of the key codes and signed the project as well.

  This is what appears in the signature box, just code until I run it:

  

  It compiles without error, but it still does not work.
  What I'm doing wrong exactly? Any help would be appreciated!
  Khalique - Amina

  Hey everybody,
  Anyone else who has this problem with these particular CBC of the advanced downloadable user interface files.
  Make sure the following is in place.

  Your JRE version is important.
  If you test on a device that is older than 7.1

  Change your JRE in a right click on the JRE and selecting the right JRE for your device. [some of you may need to download the right JRE].
  I installed the plugin for eclipse blackberry, so he automatically gave me all the available JRE. I just had to change.
  After that I changed it, I have not the reddest comments when I signed the code.
  AND
  It worked fine, no error message popping up for ' api access blocked attempts to.
  If anyone has questions and is the same problem. Please ask. I've spent hours on it, and I'd be happy to help you if I've been unclear!
  Take care!

• Unable to access most of the WVC80N sites on the internet

  I installed the WVC80N on my home network. Of the House, I can access the video camera using the URL standard xxxx.mylinksyscam.com:1024. However when I'm in my workplace firewall, I can't connect using this URL. At work, I have no difficulties to view several video like Yahoo, YouTube and sites of standard media. When I saw that I couldn't connect, I took the same laptop at a public library and was able to connect to the URL xxxs.mylinksyscam. However, others said that they cannot connect their own systems of the House to my linksys URL.
  I guess my corporate workplace and most other places 1024 to block the port of the public library is less restrictive. I would like to change my port to one that is no longer available to most of the places. My optical fiber router and modem are combined in one device Verizion FIOS M1424WR. I might add a few transfer for the two 1024-80. If I also disable my Alternate access Web Port option to use port 80. Port 80 would have a better chance to be accessible in a standard firewall of the company location?

  I solved my problem. It's easy to fix. All I had to do was Add Port 80 for the transfer rules in my verizon FIOS router.
  Thank you.

• Unable to access specific to the Web site

  Hello guys,.

  My knowledge is very basic with Cisco Pix Firewall. We are behind a PIX Firewall with version 6.3 of the PIX and recently we have not been able to access a specific website of our workstations (all other sites are fine). AFAIK, workstations use a PAT global address, but we have a server who is also behind the PIX and has a different IP assigned in the PIX config and we can navigate the site from the server.

  For workstations that connect to the site just times out, from the server, we have no problems. He isn´t a DNS problem and according to the people on the site, we are not prohibited. Like I said my knowledge is fundamental, and I was wondering if it could be linked to the PIX and a possible solution.

  Any ideas?.

  Thanks in advance.

  Moises,

  Thanks for the update.  I had cases where this is the case - the end-server is a kind of research of research of blacklist or DNS record to check the IP of the applicant.  I've also seen issues where ISPS have inadvertently, unintentionally hurt routed traffic to (or rather, far from) the source or destination.

  I'm glad that you were able to find a viable solution.  In both cases, please remember to mark this message as "Response" while others can also benefit the troubleshooting steps you have taken to resolve this issue.

  Thank you for using the SupportForums!  Have a great weekend!

  Best regards

  Kevin

• Problem of peripheral access NAS via the VPN Site to Site

  Hi all

  I am facing a strange problem with a client. I use a VPN from Site to Site between two ASA 5505 to connect its network to ours to replikate between a NAS on his side and a NAS on our side. I use the same configuration with other guests and it works fine.

  With this client, while I am able to ping the remote NAS and I have problems using SMB to connect via ssh (it works _sometimes_ but most of the time to access files via eplorer results in a timeout) and join the NAS Web portal (http and https, with https I can see the remote certificate of the SIN but the page does not load). These problems occur on both sides (our network-> NAS, customer network-> our NAS client)

  I can access the NAS even without any problems other customers. ASA newspaper I see no connection blocked or whatever it is when this happens and the tunnel seems to work fine otherwise.

  Any ideas how to refine the problem here?

  Thanks in advance

  Tobias

  It looks like you can run into problems with packets that are too big for your tunnel. Try to limit the size of TCP segment by putting the following on your ASA units:

   sysopt connection tcpmss 1360

  Most VPN tunnels are not going to have an MTU (Maximum Transmission Unit) less than 1400 bytes, so the above should clean things up.

• Client VPN cannot access anything at the main Site

  I am sure that this problem has been resolved in a million times more, but I can't get this to work.  Can someone take a look at this quick config and tell me what is the problem?

  The Cisco VPN client connects without problems but I can't access anything whatsoever.

  ASA Version 8.4 (4)

  !

  ciscoasa hostname

  activate 8Ry2YjIyt7RRXU24 encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  switchport access vlan 15

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.43.254 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address a.a.a.a 255.255.255.248

  !

  interface Vlan15

  prior to interface Vlan1

  nameif IPOffice

  security-level 100

  IP 192.168.42.254 255.255.255.0

  !

  boot system Disk0: / asa844 - k8.bin

  passive FTP mode

  network object obj - 192.168.43.0

  192.168.43.0 subnet 255.255.255.0

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the NETWORK_OBJ_10.11.12.0_24 object

  10.11.12.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.43.160_28 object

  subnet 192.168.43.160 255.255.255.240

  network of the IPOffice object

  subnet 0.0.0.0 0.0.0.0

  outside_access_in list extended access permit icmp any 192.168.42.0 255.255.255.0

  Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel

  standard access list vpn_SplitTunnel allow 192.168.43.0 255.255.255.0

  AnyConnect_Client_Local_Print deny ip extended access list a whole

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

  AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 IPOffice

  IP local pool newvpnpool 10.11.12.100 - 10.11.12.150 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 649.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.11.12.0_24 NETWORK_OBJ_10.11.12.0_24 non-proxy-arp-search to itinerary

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

  NAT (IPOffice, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

  !

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  network of the IPOffice object

  NAT (IPOffice, outside) dynamic interface

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 b.b.b.b 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  AAA authentication http LOCAL console

  AAA authentication LOCAL telnet console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  http 192.168.43.0 255.255.255.0 inside

  http 192.168.42.0 255.255.255.0 IPOffice

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  IKEv1 crypto ipsec transform-set high - esp-3des esp-md5-hmac

  crypto ipsec transform-set encrypt method 1 IKEv1 esp-3des esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto-map dynamic dynmap pfs set 30 Group1

  Crypto-map dynmap 30 set transform-set ikev1 strong dynamic - a

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  map rpVPN 65535-isakmp ipsec crypto dynamic dynmap

  rpVPN interface card crypto outside

  crypto isakmp identity address

  Crypto ikev1 allow outside

  IKEv1 crypto policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 2

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  dhcpd outside auto_config

  !

  dhcpd address 192.168.43.5 - 192.168.43.36 inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  internal RPVPN group policy

  RPVPN group policy attributes

  value of server DNS 8.8.8.8

  Ikev1 VPN-tunnel-Protocol

  username admin privilege 15 encrypted password gP3lHsTOEfvj7Z3g

  username password encrypted blPoPZBKFYhjYewF privilege 0 mark

  type tunnel-group RPVPN remote access

  attributes global-tunnel-group RPVPN

  address newvpnpool pool

  Group Policy - by default-RPVPN

  IPSec-attributes tunnel-group RPVPN

  IKEv1 pre-shared-key *.

  !

  !

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:b3f15dda5472d65341d7c457f2e8b2a2

  : end

  Well Yes, you are quite right on site!

  Asymmetric routing is not supported on the firewall, such as trafficking and out should be via the interfaces of same, in the contrary case, it think it's an attack and drop the package.

  Default gateway on the subnet devices IPOffice should be the interface IPOffice ASA (192.168.42.254), not the switch, if it is a switch shared with your home network. Similarly for devices inside subnet, default gateway must be ASA 192.168.43.254.

  In regards to the switch, you can get a default gateway or the ASA inside or IP interface IPOffice ASA and the needs of return traffic to route through the same path

• XP will not acquire an IP address. Start tcp/ip and obtain the dependency service error. Public static IP and the system still does not work.

  This system was given to me the difficulty.  It is clean of viruses and spyware, it was at a time given some.  Now unable to connect to any type of network, IPs as 0.0.0.0, will not be renewed.  Get dependency errors when I try and start TCP/IP.  I reset the winsock stack.  Any suggestion at this point would be useful.

  Hi MarkReeves,

  1. What is the accurate and complete error message?

  I suggest you try the steps from the following links in the article and see if it helps:

  The network status icon may display a message 'Acquiring network address' after an address is already acquired in Windows XP Starter Edition

  How to reset the Protocol Internet (TCP/IP)

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  I hope this helps.

• Dependent on PoPList not generating. Obtain the FRM 41337 error

  I create two pop lists in forms where the second pop list is dependent on first. I am able to programmatically generate the first list of POPs using trigger ONCE - NEW - FORM_INSTANCE. Now to build the second dependent pop list where I need to generate the list items according to the list item in the list of POPs 1, I used WHEN_LIST-CHANGED trigger on the item in the list 1 block of data. I'm not able to produce the second poplist. I get FRM 41337 error.

  Someone at - he experienced this and knows the reason? I'm sure that my code is very well as a pop list a pop list 2 codes are identical and pop list 1 works and generating the list so why same code used in WLC do not trigger capable of generating in pop list 2.

  No details on this will be helpful to the resolution of this please.

  Thank you.

  PoPList getting came not as I have above in posts. So this has been resolved by changing the Style of list = list box instead of Poplist in the properties panel for the list item.

  I do not understand why the list of B_G_NO could not generate when it has been set to "Poplist" but that works perfectly well when he's on the list of type "drop-down list. Thanks to everyone for their help.

  Problem is solved by workaround.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers. Help!

  Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers.

  I emptied my cache.  I rebooted Firefox.  This is my email website - never had a problem before.  I am able to access it on Safari.  I even tried the simple address (rather then my bookmarked login address) - still got the same error message!
  

  I have the same problem: it is written ' forbidden you don't have permission to access the/_cqr/login on that server. " I can access this site (AOL) on other browsers. After that I connected to AOL, I get this message. then I go to the address line and delete everything after than the aol.com and her and then press ENTER. then, I'm registered and can read my emails. How can we solve this problem?

• Access to the Microsoft Update Web site [error number: 0x8024400A]

  When I try to update by using the Update Web site I get the message [error number: 0x8024400A].  I need to upgrade to SP3, but I can't access the Web site to do this.  Any help would be appreciated.

  Try to download the SP directly from here.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  I hope this helps.

• I can't access my Web site and the Business Analytics: ERROR: this site is currently unavailable! I don't know why, it worked fine for 6 months!

  Hello

  A few months ago and it worked perfectly, I created the website www.cahega.fr. How ever, when I tried to go on the site this morning, it does "no start page.

  And when I try to log in on Adobe Business Catalyst® it sayq 'error, this site is currently unavailable!"

  What is going on?

  Please help me,

  Best regards

  H. piles

  Hello

  In fact, I've solved the problem! When you asked me to give you my Adobe I was using the wrong ID, I realized (one guest) and not that I used to create the Web site. The problem is now solved you were right he should bill pending, now it's fixed and the site is working!

  Thank you for everything!

  Héloïse

• After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

  Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

  You are not authorized to view this page
  You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

  Please, try the following:
  Contact the Web site administrator if you believe you should be able to view this directory or page.
  Click the Refresh button to try again with different credentials.

  Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
  Internet Information Services (IIS)

  Technical information (for support personnel)
  Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
  Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

  Thank you for your help.
  Najib

  Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

  If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

  If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

  (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

  • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
  • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

  -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

• My school (Washington State University - site Angel) appears as "Untrusted" and I can't access any of the content, how do I get around this?

  I get an error "this connection is untrusted" when I connect to the website of my school and therefore can not access all of the content, that I need for my class. It is a new problem, I just had to reinstall Mozilla when I upgraded my hard drive, it worked two days ago, but not today. Does anyone know why this would happen, or how I can get around this? The only option that is imparted to me is of ' get out me of here! "which is the exact opposite of what I need to do.

  Check the date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  Find out why the site is not approved, then click on "Technical Details to expand this section.
  If the certificate is not reliable because no issuer channel was provided (sec_error_unknown_issuer) and then see if you can install the intermediate certificate from another source.

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".

  Let Firefox recover the certificate: "Add Exception"-> "get certificate".

  • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the issuer of the certificate.

  You can see more details like the intermediate certificates that are used in the details pane.

  If "I understand the risks" is missing, this page can be opened in a (i) frame and in this case, try the shortcut menu and use "Frame this: Open image in New Tab".

  Note that some firewall monitors connections (sure) and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the certificate of the Web site.