ASA Site, Remote Site cannot access DMZ to the Hub site

So I've been scratching my head and I just can't visualize what I what and how I want to do.

Here is the overview of my network:

Headquarters: ASA 5505

Site1: ASA 5505

Site2: ASA 5505

Training3: ASA 5505

All Sites are connected L2L to the location of the Headquarters with VPN Site to Site.

Since the HQ site I can ping each location by satellite, and each satellite location I can ping the HQ site. I will also mention that all other traffic is also correctly.

Here's my number: HQ site, I have a DMZ set up with a web/mail server. This mail/web server is accessible from my HQ LAN, but not from the satellite location. I need allow that.

What should I do?

My second question is that I want for satellite sites to see networks of eachother. I should create a VPN network between sites, or can this be solved in the same way that the question of the DMZ?

I enclose the show run from my ASA HQ

See the race HQ ASA

For the mail/web server that requires access on the remote site VPN tunnels, you must add the servers to the acl crypto, similar to the way you have it for network access. Make sure that both parties have the ACL in mirror. If you're natting from the DMZ to the outside, make sure you create an exemption from nat from the dmz to the outside for VPN traffic.

For the second question, because you have only three sites, I would recommend creating a tunnel from site to site between two satellite sites.

HTH

PS. If you found this post useful, please note it.

Tags: Cisco Security

Similar Questions

Cannot access Firefox shows the missing profile or inaccessible is there an easy solution?

cannot access Firefox shows the missing profile or unreachable is there a solution I'm not a computer expert

Hello d2burnett, tryp press windows key + R and open %appdata%\Mozilla\Firefox\ - then rename the file called profiles.ini to something like oldprofiles.ini...

remote VPN cannot access mail server of asa

Hi dear.

I have the router that connect to the asa.

Internet line to connect to the router so all the nat translation is made to the router.

router outside the ip:x.x.xx

router inside the ip:10.0.0.1 interface that is connect to asa outside interface (asa outside ip address: 10.0.0.2)

my mail server to connect to the DMZ asa.

DMZ interface ip address:172.16.10.0./24

mail server IP:172.16.10.10

I'm twice nat for the ip address of the mail server.

1.i do to asa.

static (DMZ, Outside) 10.0.0.10 172.16.10.10

in this mail server ip 172.16.10.10 translation translating 10.0.0.10(10.0.0.10 ip est un sous-réseau de la plage de connexion routeur et asa).

second nat to router.

IP nat inside source static tcp 10.0.0.10 25 25 ext x.x.x.x public ip x.x.x.x

I have no problem with my nat translation to my e-mail server.

I have set up remote client vpn to asa and apply crypto map ASA outside interface which is 10.0.0.2

I do THE static nat router for asa outside ip address.

IP nat inside source static udp 10.0.0.2 x.x.x.x extensible 500 500

IP nat inside source static udp 10.0.0.2 4500 4500 extensible x.x.x.x

I have no problem with the vpn connection. I can connect vpn connection. but I can't access mail server. 172.16.10.10

What can I do in this situation?

I should be writing sheep-access list?

If Yes, how can I write this access list?

Yes, you must configure access on your ASA sheep-list as follows:

IP 172.16.10.0 allow Access-list sheep-dmz 255.255.255.0

NAT 0 access-list sheep-dmz (dmz)

Safari, chrome time cannot access most of the sites on my MacBook Air

All of a sudden since the morning of today I can access most of the sites except Google, Facebook, and LinkedIn. Safari and chrome have the same problem. I tried to empty cache, remove extensions, change dns 8.8.8.8 in Network preferences, but nothing seems to work. can someone please advice what to do.

I have OS X Yosemite with Safari 9.0.2

Thank you!

You may have installed one or more variants of the malware "VSearch' ad-injection. Please backup all data, and then follow the instructions from Apple Support to remove it.

If you have problems with these instructions, or if they do not work, see below.

Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:
```
/Library/LaunchDaemons
```
In the Finder, select

Go ▹ go to the folder...

from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

A folder named "LaunchDaemons" can open. Search inside the two files with the names of these forms:

com.something.daemon.plist

com.something.Helper.plist

com.something .net - preferences.plist

com.something.Preferences.plist

Here, something is a variable character string, that may be different in each VSearch infection. So far it has always been an alphanumeric string without punctuation signs, such as the 'cloud', 'point,' 'Highway', 'underwater', or 'trusteddownloads.' Sometimes, it's an empty string like 'e8dec5ae7fc75c28' instead of a Word. Sometimes, the string is "Apple", and then you must be particularly careful not to delete the wrong files, because many built-in OS X files have similar names.

You may have more than one copy of the malware, with different values of something.

There may be one or more files with the name of this form:

com.somethingUpd.plist

where something may be a different meaning empty string in other files. Yet once, there may be more than one file of this type, with different values of something.

Here's a specific example of an infection VSearch:

com.disbalance.daemon.plist

com.disbalance.Helper.plist

com.thunderbearerUpd.plist

You will have files with similar names, but probably not identical to these.

2. If you find such files, let the open LaunchDaemons folder and open the file following the same way:
```
/Library/LaunchAgents
```
In this case, there may be a file named

com.something.agent.plist

where the channel something is the same as before.

If you feel confident that you have identified the above files, back up all data, and then drag the files - nothing - to the trash only. You may be prompted for administrator login password. Close the Finder Windows, and then restart the computer.

Do not delete the folder 'LaunchAgents' or 'LaunchDaemons' or anything else inside either.

3 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

▹ Safari preferences... ▹ General

and click on

Set on the current Page

The malware is now permanently inactivated, as long as you reinstall it never. You can stop here if you want, or you can delete the other two components for completeness.

4. This step is optional. Open this folder:
```
/Library
```
It may have subfolders that are named as follows

something

somethingUpd

where something is one of the channels that you have seen before. Drag all these subfolders to the trash, and then close the window.

Do not delete the folder "Library" or anything else inside.

5. This step does not apply to the OS X 10.11 ("El Capitan") or later and it is optional if you are using an older version of Mac OS X.

In this folder:
```
/System/Library/Frameworks
```
There may be an element named exactly

v.Framework

either a named item

Something.Framework

Again, something is the same string as before.

This item is actually a file, although it has a different icon than usual. Drag it to the trash, and then close the window.

Do not delete the folder "Frames" or anything else inside.

6. If you do not find the files or you are not sure about the identification, after what you have found.

If in doubt, or if you have no backups, change nothing at all.

7. the penalty may have started when you have downloaded and run an application called "MPlayerX." It is the name of a legitimate free movie actor, but the name is also used fraudulently to distribute VSearch. If there is an element with that name in the Applications folder, delete it. I do not recommend to install the genuine "MPlayerX", because it is hosted on the rogue 'SourceForge' site and is bundled with other malware.

This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

Then, still in system preferences, open the pane of the App Store or software update and check the box marked

Install the system data files and security updates (OS X 10.10 or later version)

or

Automatically download the updates (OS X 10.9 or earlier version)

If it is not already done.

ASA 5505 VPN established, cannot access inside the network

Hi, I recently got an ASA 5505, and I spent weeks to find a way to set up a VPN on it.

After a few days, I finally found the solution to connect to my ASA with a VPN client yet and cannot access devices that are connected to the ASA.

Here is my config:

ASA Version 8.2 (5)
!
hostname asa01
domain kevinasa01.net
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 5
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan5
No nameif
security-level 50
IP 172.16.1.1 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain kevinasa01.net
permit same-security-traffic intra-interface
Remote_Kevin_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.254.0 255.255.255.240
inside_nat0_outbound list of allowed ip extended access all 192.168.254.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access entire 192.168.1.0 255.255.255.0
sheep - in extended Access-list allow IP 192.168.254.0 255.255.255.0 192.168.1.0 255.255.255.0
access extensive list ip 192.168.254.0 outside_access_in allow 255.255.255.0 any
access extensive list ip 192.168.254.0 inside_access_in allow 255.255.255.0 any
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
pool pool 192.168.254.1 - 192.168.254.10 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (outside) 1 192.168.254.0 255.255.255.0
NAT (inside) 0 access-list sheep - in
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd allow inside
!

a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal Remote_Kevin group strategy
attributes of Group Policy Remote_Kevin
value of server DNS 192.168.1.12 192.168.1.13
VPN - connections 3
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Remote_Kevin_splitTunnelAcl
kevinasa01.NET value by default-field
username kevin mz6JxJib/sQqvsw9 password encrypted privilege 0
username kevin attributes
VPN-group-policy Remote_Kevin
type tunnel-group Remote_Kevin remote access
attributes global-tunnel-group Remote_Kevin
address-pool
Group Policy - by default-Remote_Kevin
IPSec-attributes tunnel-group Remote_Kevin
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:2bb1da52d1993eb9b13c2f6dc97c16cd
: end

Thank you

Hello

I read your message quickly through my cell phone. I don't know why you have spent your config twice. Maybe a typo issue.

I see the acl sheep in the wrong way. I mean 192.168.254 are your pool VPN and 192.168.1.0 your local LAN.

The acl must be:

sheep - in extended access-list permit ip 192.168.1.0 255.255.255.0 192.168.254.0 255.255.255.0

For nat (inside), you have 2 lines:

NAT (inside) 1 192.168.1.0 255.255.255.0 ==> it is redundant as the 1 below does the same thing with more networks if there is inside side. You can delete it.
NAT (inside) 1 0.0.0.0 0.0.0.0

Why are you doing this nat (outside)?

NAT (outside) 1 192.168.254.0 255.255.255.0

Here are the first questions that I have seen by reading through my mobile. Let's change this and let me know. I'll take a look later with a computer (tonight or tomorrow)

Thank you.

PS: Please do not forget to rate and score as good response if this solves your problem.

Client VPN cannot access anything at the main Site

I am sure that this problem has been resolved in a million times more, but I can't get this to work. Can someone take a look at this quick config and tell me what is the problem?

The Cisco VPN client connects without problems but I can't access anything whatsoever.

ASA Version 8.4 (4)

!

ciscoasa hostname

activate 8Ry2YjIyt7RRXU24 encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

switchport access vlan 15

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.43.254 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address a.a.a.a 255.255.255.248

!

interface Vlan15

prior to interface Vlan1

nameif IPOffice

security-level 100

IP 192.168.42.254 255.255.255.0

!

boot system Disk0: / asa844 - k8.bin

passive FTP mode

network object obj - 192.168.43.0

192.168.43.0 subnet 255.255.255.0

network obj_any object

subnet 0.0.0.0 0.0.0.0

network of the NETWORK_OBJ_10.11.12.0_24 object

10.11.12.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.43.160_28 object

subnet 192.168.43.160 255.255.255.240

network of the IPOffice object

subnet 0.0.0.0 0.0.0.0

outside_access_in list extended access permit icmp any 192.168.42.0 255.255.255.0

Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel

standard access list vpn_SplitTunnel allow 192.168.43.0 255.255.255.0

AnyConnect_Client_Local_Print deny ip extended access list a whole

AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

print the access-list AnyConnect_Client_Local_Print Note Windows port

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

MTU 1500 IPOffice

IP local pool newvpnpool 10.11.12.100 - 10.11.12.150 mask 255.255.255.0

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 649.bin

don't allow no asdm history

ARP timeout 14400

NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.11.12.0_24 NETWORK_OBJ_10.11.12.0_24 non-proxy-arp-search to itinerary

NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

NAT (IPOffice, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

!

network obj_any object

NAT dynamic interface (indoor, outdoor)

network of the IPOffice object

NAT (IPOffice, outside) dynamic interface

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 b.b.b.b 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

AAA authentication http LOCAL console

AAA authentication LOCAL telnet console

Enable http server

http 192.168.1.0 255.255.255.0 inside

http 0.0.0.0 0.0.0.0 outdoors

http 192.168.43.0 255.255.255.0 inside

http 192.168.42.0 255.255.255.0 IPOffice

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

IKEv1 crypto ipsec transform-set high - esp-3des esp-md5-hmac

crypto ipsec transform-set encrypt method 1 IKEv1 esp-3des esp-sha-hmac

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

Crypto-map dynamic dynmap pfs set 30 Group1

Crypto-map dynmap 30 set transform-set ikev1 strong dynamic - a

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

map rpVPN 65535-isakmp ipsec crypto dynamic dynmap

rpVPN interface card crypto outside

crypto isakmp identity address

Crypto ikev1 allow outside

IKEv1 crypto policy 1

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 2

preshared authentication

3des encryption

md5 hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 5

SSH group dh-Group1-sha1 key exchange

Console timeout 0

dhcpd outside auto_config

!

dhcpd address 192.168.43.5 - 192.168.43.36 inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

allow outside

AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1

AnyConnect enable

tunnel-group-list activate

internal RPVPN group policy

RPVPN group policy attributes

value of server DNS 8.8.8.8

Ikev1 VPN-tunnel-Protocol

username admin privilege 15 encrypted password gP3lHsTOEfvj7Z3g

username password encrypted blPoPZBKFYhjYewF privilege 0 mark

type tunnel-group RPVPN remote access

attributes global-tunnel-group RPVPN

address newvpnpool pool

Group Policy - by default-RPVPN

IPSec-attributes tunnel-group RPVPN

IKEv1 pre-shared-key *.

!

!

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:b3f15dda5472d65341d7c457f2e8b2a2

: end

Well Yes, you are quite right on site!

Asymmetric routing is not supported on the firewall, such as trafficking and out should be via the interfaces of same, in the contrary case, it think it's an attack and drop the package.

Default gateway on the subnet devices IPOffice should be the interface IPOffice ASA (192.168.42.254), not the switch, if it is a switch shared with your home network. Similarly for devices inside subnet, default gateway must be ASA 192.168.43.254.

In regards to the switch, you can get a default gateway or the ASA inside or IP interface IPOffice ASA and the needs of return traffic to route through the same path

Remote VPN cannot access devices LAN or internet

So I have a server and a computer inside that I can access through an ASA 5505 with ASA 9.2 (1) and ASDM 7.2 (1)

The computer on 192.168.1.110 via port 8080 can show me a demo site.

The server on 192.168.1.222 got my DNS, HTTP, FTP, mail and more about it.

Outside, I got a computer (by outside, I hear from the firewall and the cable directly into the computer) on 192.168.20.2 and firewall outside being 192.168.20.1

From the outside I can access the 8080 without problem (and I guess as well with the server, but it is on another default gateway and are not accessible right now). -When I connect through my VPN I am assigned 192.168.30.5 but unable to connect inside the computer through 192.168.1.110:8080.

This will return the error: asymmetrical NAT rules matched for before and back flow; Connection for udp src outdoors: 192.168.30.5/49608 (...) dst inside: 192.168.1.222/53 refused because of the failure of the path reverse NAT.

Somewhere, I had a conflict or a non-created access rule. Anyone who wants to take a shot?

I marked with "BOLD" for what I thought that may be the cause.

ciscoasa (config) # sh running-config
: Saved
:
ASA Version 9.2 (1)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
2KFQnbNIdI.2KYOU encrypted passwd
names of
192.168.30.5 mask - 192.168.30.200 local pool Pool of IP IP 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
address 192.168.20.1 255.255.255.0
!
boot system Disk0: / asa921 - k8.bin
passive FTP mode
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
object network testServer-8080
host 192.168.1.110
Description of the test server
network of the object server-21
Home 192.168.1.222
Description of the test server
network of the object Server-25
Home 192.168.1.222
Description of the test server
network of the object Server-53
Home 192.168.1.222
Description of the test server
network of the object server-80
Home 192.168.1.222
Description of the test server
network of the object server-443
Home 192.168.1.222
Description of the test server
network of the object server-2525
Home 192.168.1.222
Description of the test server
network of the object server-993
Home 192.168.1.222
Description of the test server
network of the object server-6001
Home 192.168.1.222
Description of the test server
network of the object server-6002
Home 192.168.1.222
Description of the test server
network of the object server-6003
Home 192.168.1.222
Description of the test server
network of the object server-6004
Home 192.168.1.222
Description of the test server
network of the VPN HOST object
192.168.30.0 subnet 255.255.255.0
network of the object inside
host 192.168.1.0
the vpn server object network
Home 192.168.1.222
outside_access_in list extended access permit tcp any object testServer-8080 eq 8080
outside_access_in list extended access permit tcp any object server-21 eq ftp
outside_access_in list extended access permit tcp any object Server-25 eq smtp
outside_access_in list extended access permit tcp any object server-2525 2525 eq
outside_access_in list extended access permit udp any object server-53 eq inactive field
outside_access_in list extended access permit tcp any object server-80 eq www
outside_access_in list extended access permit tcp any object server-443 https eq
outside_access_in list extended access permit tcp any object server-993 993 eq
outside_access_in list extended access permit tcp any object server-6001 eq 6001
outside_access_in list extended access permit tcp any object server-6002 6002 eq
outside_access_in list extended access permit tcp any object server-6003 eq 6003
outside_access_in list extended access permit tcp any object server-6004 eq 6004
outside_access_in to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.30.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 721.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) VPN-dynamic HOSTS within static destination to source Server VPN - vpn server
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
object network testServer-8080
NAT (inside, outside) interface static 8080 8080 tcp service
network of the object server-21
NAT static (inside, inside) of the service ftp ftp tcp interface
network of the object Server-25
NAT (inside, outside) interface static tcp smtp smtp service
network of the object Server-53
NAT static (inside, inside) interface tcp service area
network of the object server-80
NAT (inside, outside) interface static tcp www www service
network of the object server-443
NAT (inside, outside) interface static tcp https https service
network of the object server-2525
NAT (inside, outside) interface static 2525 2525 tcp service
network of the object server-993
NAT (inside, outside) interface static tcp 993 993 service
network of the object server-6001
NAT (inside, outside) interface static tcp 6001 6001 service
network of the object server-6002
NAT (inside, outside) interface static tcp 6002 6002 service
network of the object server-6003
NAT (inside, outside) interface static 6003 6003 tcp service
network of the object server-6004
NAT (inside, outside) interface static service tcp 6004 6004
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS AAA server HSS-auth-server protocol
allow only
AAA-server HSS-auth-server (inside) host 192.168.1.222
Timeout 5
key *.
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
trustpool crypto ca policy
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0

dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal HSSvpn group strategy
attributes of Group Policy HSSvpn
value of server DNS 192.168.1.222
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value outside_access_in ! This value was its own name earlier
HSS.dk value by default-field
type tunnel-group HSSvpn remote access
attributes global-tunnel-group HSSvpn
address IP-pool pool
HSS-auth-server authentication-server-group
Group Policy - by default-HSSvpn
password-management
IPSec-attributes tunnel-group HSSvpn
IKEv1 pre-shared-key *.
tunnel-group HSSvpn ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:9859258e11364180cf9b3e21173b3f2f
: end

Hello

"Nat" bold configuration is incorrect, as you would expect.

Replace it with something like this

the object of the LAN network
subnet 192.168.1.0 255.255.255.0

NAT (inside, outside) 1 static source LAN LAN to static destination HOST-VPN-VPN-HOST

I also suggest using a separate access the ACL of the Tunnel from Split 'standard' list.

For example

standard SPLIT-TUNNEL access list permit 192.168.1.0 255.255.255.0

Naturally, you must pass the ACL above to used "group policy" .

In addition, if you want to control the incoming connections to VPN users in 'outside_access_in' ACL, then you could change the default settings on the SAA by running the command

No vpn sysopt connection permit

If you need to return back then just to deliver without 'no' in front. Then back to its default value. This does not show in the running configuration by the way.

With this setting all connections from VPN connections should be allowed on the interface ACL interface that ends the VPN connection. If in your case that would be the ACL attached to the 'outside' interface.

Hope this helps :)

-Jouni

Cisco ASA 5505 VPN L2TP cannot access the internal network

Hello

I'm trying to configure Cisco VPN L2TP to my office. After a successful login, I can't access the internal network.

Can you jhelp me to find the problem?

I have Cisco ASA:

within the network - 192.168.1.0

VPN - 192.168.168.0 network

I have the router to 192.168.1.2 and I cannot ping or access this router.

Here is my config:

ASA Version 8.4 (3)

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.1.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP 198.X.X.A 255.255.255.248

!

passive FTP mode

permit same-security-traffic intra-interface

the net-all purpose network

subnet 0.0.0.0 0.0.0.0

network vpn_local object

192.168.168.0 subnet 255.255.255.0

network inside_nw object

subnet 192.168.1.0 255.255.255.0

outside_access_in list extended access permit icmp any any echo response

outside_access_in list extended access deny ip any any newspaper

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

IP local pool sales_addresses 192.168.168.1 - 192.168.168.254

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

NAT dynamic interface of net-all source (indoor, outdoor)

NAT (inside, outside) source inside_nw destination inside_nw static static vpn_local vpn_local

NAT (exterior, Interior) source vpn_local destination vpn_local static static inside_nw inside_nw-route search

!

network vpn_local object

dynamic NAT interface (outdoors, outdoor)

network inside_nw object

NAT dynamic interface (indoor, outdoor)

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 198.X.X.B 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

AAA authentication enable LOCAL console

the ssh LOCAL console AAA authentication

AAA authentication http LOCAL console

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

IKEv1 crypto ipsec transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac

transport in transform-set my-transform-set-ikev1 ikev1 crypto ipsec mode

Crypto-map Dynamics dyno 10 set transform-set my-transformation-set-ikev1 ikev1

card crypto 20-isakmp ipsec vpn Dynamics dyno

vpn outside crypto map interface

Crypto isakmp nat-traversal 3600

Crypto ikev1 allow outside

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH 192.168.1.0 255.255.255.0 inside

SSH timeout 30

Console timeout 0

management-access inside

dhcpd address 192.168.1.5 - 192.168.1.132 inside

dhcpd dns 75.75.75.75 76.76.76.76 interface inside

dhcpd allow inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal sales_policy group policy

attributes of the strategy of group sales_policy

Server DNS 75.75.75.75 value 76.76.76.76

Protocol-tunnel-VPN l2tp ipsec

user name-

user name-

attributes global-tunnel-group DefaultRAGroup

address sales_addresses pool

Group Policy - by default-sales_policy

IPSec-attributes tunnel-group DefaultRAGroup

IKEv1 pre-shared-key *.

tunnel-group DefaultRAGroup ppp-attributes

ms-chap-v2 authentication

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13

: end

Thanks for your help.

You must test with 'real' traffic on 192.168.1.2 and if you use ping, you must add icmp-inspection:

Policy-map global_policy

class inspection_default

inspect the icmp

--

Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni

Remote user cannot access the internet

Hello

I have a problem with my remote vpn users. They can't access internet after they establish the vpn connection. I read on the split tunnel and I think that its set up right, but his does not.

Please if you have time take a look. I have attached my asa 5505 configuration

Best regards.

your split tunneling is configured correctly, but group policy in which will done this configuration is not applied to the tunnel-group:

tunnel-group monitoring_vpn_group General-attributes

Group Policy - by default-monitoring_vpn_policy

--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni

Apple Watch 2 cannot access Siri when the phone is charging

My iPhone is plugged in my Apple Watch says that it cannot connect to Siri 6 simple feet further. Has anyone else experienced this problem and/or been able to solve it?

Hello

The following steps may help:
- On your iPhone, go to: settings > Siri - disable, pause for a few moments, and then reactivate the Siri.
- If it does not immediately help, then restart both devices.
  - The two put together, and then restart your iPhone first:
  - Restart your iPhone, iPad or iPod touch - Apple Support
  - Restart your Apple Watch - Apple Support
- If the problem persists, then disable the twinning and re - pair your watch:
  - The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
  - Cancel the twinning of your iPhone - Apple and Apple Watch Support
  - Set up your Apple Watch - Apple Support

ScrollBar in AT & T send files not work - cannot access emails beyond the illustrated screen on 25 - fix?

I opened an e-mail folder and discovered that I could only see the first 25 messages (this occurred in each folder, I opened - the scroll bar on the right side of the window to e-mail folder not active.

Hello

Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:
1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
2. Under "Time range to clear", select "all".
3. Now, click the arrow next to details to toggle the active details list.
4. In the list of details, see the Cache and Cookies and uncheck everything.
5. Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .

Cannot access hyperlinks in the body of emails in Outlook Experess.

I have confused some people responding to another poster, who has similar problems in a different system.

I use Vista.

I get an email via Outlook Express. In the body of the e-mail message, someone sends me a hyperlink to a site or a download. When I try to click on the hyperlink, you'll see this message...

"This operation has been cancelled due to restrictions on this computer. Contact the system administrator. »

They are not attached.

I made this spot for years, and I have never known of problems until recent weeks.

Thank you.

I have confused some people responding to another poster, who has similar problems in a different system.

I use Vista.

I get an email via Outlook Express. In the body of the e-mail message, someone sends me a hyperlink to a site or a download. When I try to click on the hyperlink, you'll see this message...

"This operation has been cancelled due to restrictions on this computer. Contact the system administrator. »

They are not attached.

I made this spot for years, and I have never known of problems until recent weeks.

Thank you.

No, you have confused us.
You're the wrong Microsoft Outlook with Outlook Express.
Have you read the last few responses from this link?
http://social.answers.Microsoft.com/forums/en-us/vistafiles/thread/a2a27690-0173-4e61-AED5-33114aa676ab
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

ASA 8.4 (6) "cannot retrieve or check the CRL.

Hello

I have configured our ASA to retrieve a list of Revocation provided through our Linux certification authority. The LCR is exported via Tinyca as a crl file and served by Apache.

The file is accessible by the SAA and to date, I see an http 200 (OK). Despite this, I get an "impossible to extract or to check the Revocation list.

The ASA is configured as follows:

crypto ca trustpoint LINUX-CA-TP
revocation-check crl none
enrollment terminal
crl configure
policy static
url 1 http:///issuingca.crl
no protocol ldap
no protocol scep

Which allows to debug and try a "request for LRC crypto ca LINUX-CA-TP:

ASA (config)# crypto ca crl request LINUX-CA-TP

CRYPTO_PKI: CRL is being polled from CDP http:///issuingca.crl.

Unable to retrieve or verify CRL
vpn015pi(config)#
CRYPTO_PKI: HTTP response header:
HTTP/1.1 200 OK
Date: Wed, 18 Dec 2013 12:49:01 GMT
Server: Apache/2.2.22 (Ubuntu)
Last-Modified: Wed, 18 Dec 2013 09:50:20 GMT
ETag: ...
Accept-Ranges: bytes
Content-Length: 1170
Connection: close
Content-Type: application/x-pkcs7-crl

CRYPTO_PKI: transaction HTTPGetCRL completed

I'm a little puzzled. The error is not really tell where the ASA is exactly a failure!

Thank you

Hello.

I know this is a late response, but I found the solution.

My CA was created through openssl commands and LCR was coppied to the www server. I installed the CA ASA certificate and I tried to check the Revocation list. But he has failed. It's the debug output:

CRYPTO_PKI: CRL is being polled from CDP http://x.x.x.x/ca/root-ca/root-ca.crl.crypto_pki_req(0x00007fff2b9e3900, 24, ...)CRYPTO_PKI: Crypto CA req queue size = 1.Crypto CA thread wakes up!CRYPTO_PKI: http connection openedCRYPTO_PKI: content dump count 81----------CRYPTO_PKI: For function crypto_http_sendGET /ca/root-ca/root-ca.crl HTTP/1.0Host: x.x.x.x

CRYPTO_PKI: For function crypto_http_sendCRYPTO_PKI: content dump-------------------

CRYPTO_PKI: HTTP response header: HTTP/1.1 200 OKDate: Wed, 13 Jan 2016 08:10:01 GMTServer: Apache/2.4.7 (Ubuntu)Last-Modified: Tue, 12 Jan 2016 10:12:50 GMTETag: "31c-529204bc05097"Accept-Ranges: bytesContent-Length: 796Connection: closeContent-Type: application/x-pkcs7-crl

CRYPTO_PKI: CRL data2d 2d 2d 2d 2d 42 45 47 49 4e 20 58 35 30 39 20 | -----BEGIN X509 ...

CRYPTO_PKI: transaction HTTPGetCRL completedCrypto CA thread sleeps!CRYPTO_PKI: Failed to retrieve CRL for trustpoint: ASDM_TrustPoint3. Retrying with next CRL DP...

Because the CRL file has been downloaded, I check my LCR with the command openssl on my linux server:

openssl crl -inform PEM -text -in crl/root-ca/root-ca.crl Certificate Revocation List (CRL): Version 2 (0x1) Signature Algorithm: sha256WithRSAEncryption Issuer:  Last Update: Jan 12 10:09:33 2016 GMT Next Update: Jan 11 10:09:33 2017 GMT CRL extensions: X509v3 Authority Key Identifier:  keyid:E9:5E:25:61:EB:5D:9D:7E:2E:1A:3A:DA:71:B3:7B:C2:55:8D:59:66

 Authority Information Access:  CA Issuers - URI:http://x.x.x.x/ca/root-ca/root-ca.cer

 X509v3 CRL Number:  1No Revoked Certificates. Signature Algorithm: sha256WithRSAEncryption...

-----BEGIN X509 CRL-----...-----END X509 CRL-----

I founded CRL file is in PEM format. And because another available in LRC format is DER format I have converted to DER format and copied to the www server.

openssl crl -inform PEM -outform DER -in crl/root-ca/root-ca.crl -out crl/root-ca/root-ca-der.crl

After that I tried to download file CRL my ASA again and he succeeded.

 CRYPTO_PKI: CRL is being polled from CDP http://x.x.x.x/ca/root-ca/root-ca.crl.crypto_pki_req(0x00007fff2b9e3900, 24, ...)CRYPTO_PKI: Crypto CA req queue size = 1.Crypto CA thread wakes up!CRYPTO_PKI: http connection openedCRYPTO_PKI: content dump count 81----------CRYPTO_PKI: For function crypto_http_sendGET /ca/root-ca/root-ca.crl HTTP/1.0Host: x.x.x.x

CRYPTO_PKI: For function crypto_http_sendCRYPTO_PKI: content dump-------------------

CRYPTO_PKI: HTTP response header: HTTP/1.1 200 OKDate: Wed, 13 Jan 2016 08:28:08 GMTServer: Apache/2.4.7 (Ubuntu)Last-Modified: Wed, 13 Jan 2016 08:25:54 GMTETag: "227-52932eb2c1926"Accept-Ranges: bytesContent-Length: 551Connection: closeContent-Type: application/x-pkcs7-crl

CRYPTO_PKI: CRL data30 ...

CRYPTO_PKI: Found suitable tpCRYPTO_PKI: Found suitable tpCRYPTO_PKI: Failed to create name objects to compare DNs. status = 1795CRYPTO_PKI(select cert) subject = ...CRYPTO_PKI: Found a subject match - inserting the following cert record into certListCRYPTO_PKI: Storage context locked by thread Crypto CA

CRYPTO_PKI: inserting CRLCRYPTO_PKI: set CRL update timer with delay: 31455520CRYPTO_PKI: the current device time: 08:30:53 UTC Jan 13 2016

CRYPTO_PKI: the last CRL update time: 10:09:33 UTC Jan 12 2016CRYPTO_PKI: the next CRL update time: 10:09:33 UTC Jan 11 2017CRYPTO_PKI: CRL cache delay being set to: 3600000CRYPTO_PKI: Storage context released by thread Crypto CA

CRYPTO_PKI: transaction HTTPGetCRL completedCrypto CA thread sleeps!

Cannot access portfolio after the upgrade to iOS 10

I haven't seen this pop up on other forums yet, but my iPhone 6 Plus does not double tapping on my lock screen after that I upgraded to iOS 10.

I went into the settings of the portfolio and Apple pay and made sure that allow access when it is locked is on. Does anyone else know this?

I'm having the same problem

cannot access data for the ipad
- I broke my touch screen of the iPad that it no longer responds when I touch it but everything else still works I connect my iPad to iTunes and it says to respond to my iPad, but I can't because the touchscreen does not allow me to unlock it (there is no access code). I fixed my screen twice by a part of the third and the third time, the touch screen started ghosts then I dropped it the screen cracked and now the touchscreen does not work. However, he always ghost sometimes, but rarely. All I want to do now is get my data off the unit. can anyone help?
If you have connected the iPad to a computer, try to use the same computer, it shouldn't you Guest if you confidence before.

On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

ASA Site, Remote Site cannot access DMZ to the Hub site

Similar Questions

Maybe you are looking for