No card its audio-not detected

Similar Questions

• Z400 Lenovo Ideapad Card Reader does not detect anything

  I have installed the lenovo z400 appropriate card reader driver, restarted my laptop...

  inserted my sd card, then the laptop does not detect anything, pls help!

  PROBLEM SOLVED!

  I just kept my laptop mode "sleep" for 20 minutes, when I opened it back, something has been installed, then I saw that it was the driver of the card reader.

  Card reader works now!

• USB card reader does not detect memory cards

  memory card

  I do not have a slot for memory card but I have a usb card reader, but it just recently stopped reading all my memory cards? What should I do?

  Hello

  If you can't get the working card reader, you can use a card reader that is
  not expensive.

  -------------------------------------------------------------

  To check your version of Windows.

  Check with the manufacturer of system and their forums (if any) for known issues.

  Your other USB devices work?

  Try a system restore to before the drive stopped working if possible.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

• INTERAL card reader has not detected SD card on Media center m7160n Windows 7

  Hello everyone I hope that everyone is doing well unfortunately im not.

  IM extremely frustrated and I don't know what else to try.

  I advanced and installed windows 7 ultimate on a HP Media center PC m7160n on 1 GB ram

  He worked like wonders she even supports aero. What did eal very well until I tested the 9 in 1 card reader internal

  He just did not detect SD cards

  On my device manager, I see no warning anywhere and my drives F, G, H, I are listed as the "yellow" driver laptop drivers

  When I insert USBs automatic playback is fine but when I insert the SD card, nothing comes

  Any ideas?  It worked fine in XP

  Does windows 7 assigned the wrong drivers for the card reader? any advice would be extremely helpful

  I'm going to try the activation of the card chip on services.msc

  Also, sorry if this is in the wrong place.

  Thank you!

  I had a similar problem with a card on a hpe 130f reader. It turned out to be a faulty card reader.

• PRODUCT NO #ACJ QG468PA: CARD READER IS NOT DETECTED

  MY SERIAL No. - [Personal information deleted], AND card eadeer does not work... Please help

  Hello BHUMINDRA,

  Welcome to the forums of HP,

  Download and install this driver;

  http://WHP-hou9.Cold.extweb.HP.com/pub/SoftPaq/sp55001-55500/sp55030.exe

  Drunks.

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Graphics cards GTX - 770M not detected in Device Manager

  Salvation;

  My AW-18 does not correctly detect my GTX - 770 M (x 2) cards and display them in the Device Manager. What I see is that in the other devices section, there are two unknown devices listed, one of which I already know (not related). Any GTX cards appear in graphics cards.

  Also, when I try to install GeForce experience, I get an error saying that I don't have cards chart for this program. It allows to launch fine until today (December 15, 2014).

  This PC has a hard drive erasure and system reinstall in its history. It is possible that this point has been like that for this event.

  The Hardware Id info on the elements of the mystery are as follows:

  ACPI\VEN_SMO & DEV_8810
  ACPI\SMO8810
  * SMO8810

  So I guess I have two questions;

  (1) can you tell me what is this mystery device?

  (2) why can I not see my graphics card in Device Manager, despite all the usual activities like the search of new hardware, drivers, etc..

  Thank you

  Graham

  Also note that I had already run the troubleshooter from Dell and it detected no problems.

  I found a solution myself.

  I looked at the BIOS settings by the F2 key at startup, and the only thing I could see I could try was to restore the default settings, so I did. My PC booted then up normally but for low resolution. Device Manager now showed two graphics cards, so I ran the installer of the latest GeForce drivers and the PC works now perfectly once more.

• "17R 7720 graphics card IS dedicated not detected GT650M", after the restoration of the bios and PSA diagnose, not yet detected

  After twitter @DellCares, DELL-Kiran K suggest me restore the bios and the last thread PSA: http://en.community.dell.com/support-forums/laptop/f/3519/p/19508371/20373155.aspx

  Here is the result.

  1. the restoration of the bios

  After the restart, there is still no GT650m detected by the operating system.

  

  2. PUBLIC interest message diagnose

  

  the result shows that the video card is installed but only 64 MB of video memory that is certainly not the graphics card of GT650m to the dedicated address.

  

  The rest of the material are ok as long as all the tests passed.

  
  

• B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

  AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

  I installed the driver below and my problem has been fixed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  I hope this helps someone else?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  Thank you for the help with the Forum. I find the help I need with my new Lenovo.

• Roxio capture card not detected in Windows 7 game.

  original title: how to revive plug-n-play

  I recently got a Roxio capture card and everything works fine on it, but my other computer, Dell Optiplex, could not manage it so I fell on my lenovo thinkpad and plug the device into the usb port but I forgot to install the CD it came with the first plug-n-play came with "no driver found". so now I installed it on here, but when I re home acquisition card, Plug n play dosent come up. and I tried to use the add hardware feature but could not find my device (more I didn't know really what it would be under).

  is there a way to reset plug n play or something, so I can install it with the pilot who is now on there?

  BTW, both running win7

  Hi Sonrio,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it looks like the game capture card Roxio is not detected in Windows.

  I have a couple of steps that should help you with this problem.

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to connect the card somewhere else USB and check.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Card reader HP Pavilion dv6 does not detect some SDHC cards

  Hp Pavilion dv6-6104so laptop

  Windows 7-64 bit

  The laptop card reader does not detect some of our SDHC cards. We have updated the driver to the latest version, Realtek PCIE 6.1.7601.90 and BIOS, but it does not yet recognize some of our cards.

  We have six three SanDisk SDHC cards (4, 32 and 32 GB), two Kingston (8 and 8 GB) and an integral (4 GB). The card reader recognizes four of them (4 to 32 GB SanDisk cards and one of the two cards Kingston). What is strange and you may have already noticed is that the card reader recognizes only one of two cards with the same brand and quality!

  On the two cards that don't recognize in our specifications, they work properly in their corresponding cameras and are detected without problem by another reader of cards to laptop of HP Pavilion dv6-3138so, as well as by two netbooks from our two different brands.

  When we connect the camera (a Canon and Sony, both point) to the computer via a cable USB 2.0, the laptop detects the cameras and through them, we can access the cards.

  We bought the laptop less than two weeks in Helsinki, Finland.

  Thank you in advance for your help!

  Hey everybody,

  Use of a high capacity card in a standard card reader location causes this problem. Im going to guess that the cards you ar having problems with are not standard SD cards and SDHC cards. As Naoto said, using a camera as a card reader you workaround this. You can also look in the adapters of SDHC card reader. Here is a good article on SDHC cards: http://goo.gl/lj5Fq

  I hope this helps!
  Sean

• my hp windows does not detect a driver controller ethernet/what should I do?

  I was recently remove things from my desktop under Add or remove programs section and I think I have acidently deleted my ethernet controller drivers, I think, and now when rise I have internet access or try it say that its does not detect any wired or wireless internet cards... Please help me im in College and I really need my computer work If it wasn't for my cell phone, I would have the same power to send this, thanks again and trully appreciate your help.

  I was recently remove things from my desktop under Add or remove programs section and I think I have acidently deleted my ethernet controller drivers, I think, and now when rise I have internet access or try it say that its does not detect any wired or wireless internet cards... Please help me im in College and I really need my computer work If it wasn't for my cell phone, I would have the same power to send this, thanks again and trully appreciate your help.

  You need to understand what the material is, visit the web page of the manufacturer (on another machine), download the software (drivers) for the hardware in the machine, copy it on this machine (USB key, etc.) and install.

• See 5.1.2 problem with smart cards - reader to not see Office.

  Hi all

  We try to roll an office linked Clone pool that is used by our service accounts and as such, they need to be able to use for banking smart cards. We have installed all the necessary software on the machine of model (GemSafe Gemalto) and also one of our Thin Clients (Wyse V10L or C10LE) connected to the model directly via RDP with the card reader chip attached to ensure that different drivers installed correctly and all is well, the virtual machine is able to see the smart card reader.

  The problem comes when spread us these machines up to the pool, the smart card reader is not detected at all. We tried to connect from the Client light view or via RDP directly to one of the linked Clone desktops and both meet the same problem, that is, the drive is not seen at all. If we plug/unplug the drive of the Wyse terminal we see it be detected in the log of the events on the Client itself.

  Can what tools or newspapers we use side view or VMware to solve this problem?

  To confirm, in the settings to connect to the server by smart card authentication is set to optional. In Global political USB access is set to allowed.

  If need more information please ask and I will be happy to provide it.

  Thanks in advance.

  Right, we got to the bottom of it... and I am kicking myself!

  There is a GPO side configuration of the active computer. Administrative Templates/Windows components/Remote Desktop Services / Remote Desktop Session Host / Device and resource Redirection - do not allow redirection of card device chip.

  GRRRR!

• Audio device is not detected on Satellite L40 with Vista

  I buy the Toshiba Satellite L40 with Microsoft Vista Home. Some reasons for work, I removed Vista and installed Windows XP.

  After this audio device action is not detected. I tried to find the driver on the web, but without success. Can you help me in this situation?

  I checked Toshiba's support page and drivers of Windows XP Home edition are not available at the moment. I hope it will happen soon. Unfortunately, I wasn't able to identify a sound card on your Satellite L40.

  You may be lucky and someone will give you a useful tip.

• L300 satellite speakers do not work - no audio device not detected

  I just bought a L300 and the speakers do not work.
  The computer says there is no audio device detected and when I checked it is said more far there are no drivers installed for the speakers, and I can't find a way to install them. Can anyone help?

  Can I ask you if you use the OS preinstalled Toshiba?
  The message; No audio device detected means that it sound card doesn't work.
  Why? Well, maybe the audio driver has not been installed properly?

  Please check this!

  PS: Is there any yellow exclamation point in Device Manager?