Similar Questions

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• In windows 7 and noticed on the desktop icons, below the left most of my icons are circle red.

  Have windows 7 and noticed on the desktop icons, below the left most of my icons are red circle or square with a white cross in it, what it means?

  Hello

  Could you provide a screenshot, desktop icons?

  The circle has a strikebar through it?

  What antivirus do you use?

  (1) reboot and start typing the F8 key

  Select Mode safe mode with networking

  Download the following and run a full scan

  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

  This is to remove the malware invade the system.  Reset when the scan is complete.

  Run the System File Checker

  Start > type CMD > right click on CMD > select Run As Administrator

  Type sfc/scannow

  Press enter

  Use the System File Checker tool to repair missing or corrupted system files

  https://support.Microsoft.com/en-us/KB/929833

  This occurs when the .ico association is corrupt.

  To resolve this issue, follow these steps:

  1. Click Start, click run, and then
     Type regsvr32 /i mshtml.dll
  2. Click OK or press the ENTER key.

  https://support.Microsoft.com/en-us/KB/968486b

• Safari can't open the page because your iphone is not connected to the internet

  Hello

  I had this problem since I updated to iOS 9.3.1. I use mobile data and when I open Safari, it says: "Safari cannot open the page because your iphone is not connected to the internet. I can't find or load pages. However, I can connect using mobile data chrome and other applications such as Instagram etc. Funny thing is when I connect to wifi, Safari will work very well. Help, please. Thank you very much

  I use the iphone 5, iOS 9.3.1.

  Thanks again!

  Use settings - mobile - cellular - data scroll through Safari - is he toggled OFF?

• Resolution of the image has changed after the calibration of the image

  Hi all

  I put my webcam resolution up to 1280 x 720, but after the Calibration of the Image, the video changed to 1364 x 730.

  This affects at the coordinate of filtering? It is very important in my application.

  BTW, Pattern Matching 4, there is an exit of matches (real world), how to give him information to translate from pixel in mm? Currently I use corresponding pixel and use a few calculations to translate correspondence in mm. And where is the origin of the actual coordinates? It is also in the upper left corner as pixel coordinates?

  Hello

  You can try using the "IMAQ convert Pixel to Real World VI" to transform the coordinates of the pixel to the real world coordinates.

  Best regards.

  Daniel.

• Firefox has problems after the update

  Each time I update Firefox I end up having problems with it! My current problem (which has also been a problem before and never satisfactorily resolved - I have just learned to live with him) is the complete loss of my home page. Despite the fact that the options display it be correctly set, it now opens the last page I had from my previous session.

  I know you will tell me that everything looks fine, so try to uninstall/reinstall, or play with my preferences file. all the usual panaceas, but I have none of that! This problem happens ALL. UNIQUE. TIME I update FF! This is ridiculous and it has to stop. As this is a common problem with so many users, it's something that should get fixed before all pretty small setting Visual and other such nonsense.

  Another issue that keeps coming up is the saved preferences lack operating system. I'll go for months with the browser darn do not save my preferences and then, boom! All the sudden one day randomly, it will start to do what I want, as fast, y ' All will come out with another update and I'm back to the same old problems!

  Look, I love FF, it's my favorite browser. I really need to make it work as he assumed EVERY time I OPEN IT! Is there a fix that does not require me to erase my hard drive? Seriously, this is getting old waaaaay!

  Hello JaneDoe1651, check if you have problems with safe mode.

  In addition, in the details of your system, it seems that you have a User.js file in your profile folder. The user.js file does not exist by default. If you create the file, forget it, if you have not created, then try to remove the User.js file, to see if the problem goes away (some programs to also create the file).

  Thank you

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Cannot restart after El Capitan put 10.11.6 updated

  I have a MacBook Pro (13-inch, mid 2012) with the OS X10.11.5 (15F34). When the update to 10.11.6, rebooting is not the case, the update is not implemented. Finder and System Information.app do not react. It is impossible to relaunch the Finder or kill the Information.app system. I tried a hard stop, but I come back to the same situation, even after waiting the necessary time to reopen not already running applications. How to do this?

  The only application that I recently installed is Express Scribe, a transcription software I really need and I am reluctant to remove or uninstall. Is there a solution? Thanks in advance for your help.

  Try to boot inSafe Mode and see if the problem persists? This will allow to test if the problem is in your user or system.

  Restart now ' shift '.

  (Wait to take more time to start in this way because it runs a check of directory first. Also give it some time after the start because he runs maintenance routines at the beginning).

  If this does not work, see this topic Support of Apple:

  If your Mac will not turn on - Apple Support

• Make sure you get all your drivers after the upgrade of your operating system

  I've seen a lot of post lately in which users try to upgrade their operating systems (Vista-> Windows 7 or Windows 7-> Windows 8).  Often the hardest part of this upgrade is to make sure that you get all of the available drivers and software in order to use the material.

  You can always download software and drivers for your laptop computer manually by visiting the HP support Web page and search for your laptop in the product number.  This document shows you how to locate the number for your product.
  
  However, the best way to download and install the software for your laptop is to use HP Support Assistant.  This application comes pre-installed on most computers but portable consumer is likely to be absent after a clean install or upgrade the operating system.  It will search all the drivers and other software that can use your laptop as well as updating existing drivers/software.

  I hope that you will find useful information.  Have a great day!

• Get the error when after the desktop is loaded: "search parameter was a problem and will be shut down."

  original title: definition error according to the office is responsible.

  the search parameter error message had a problem and will be shut down. This happens when startups while remaining on the desktop.

  Hello

  1. What is the exact error message you get?

  2. have you recently made changes to the computer?

  I suggest you to see the site mentioned below:

  Step 1: Safe Mode

  Start the computer in safe mode and check if the problem persists

  A description of the options to start in Windows XP Mode

  http://support.microsoft.com/kb/315222.

  If the problem does not persist in star safe mode the computer to the boot and see if the problem still occurs.

  Step 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

   

  I also suggest you to see link below:

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.microsoft.com/kb/308041.

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Warning: As there is a possibility of loss of data after the upgrade on site I suggest you make a backup before the operation.

   

  Note:  When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

• Windows Media Player cannot play the protected file. The player has detected that the connection to your hardware might not be sure

  I just bought the New Avengers movie with the digital copy. I moved it and now I can't watch it. I have "Windows Media Player cannot play the protected file. Drive detected that the connection to your hardware may not be safe. "when I click it. What now?

  Hi Jason,

  Thanks for asking this question to Microsoft Community.  I'll try and help you resolve the problem; However, I will need to ask you a few questions.

  Are you able to play other movies without any problem? Have you done a recent software or changes to the material on the computer?

  Here is a link with some good steps. Go through it and check if it helps. Also check out this article and see if it helps.

  Also, see the steps in the article and see if it helps.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• How to get the sticky notes gadget that has disappeared from my desktop (Windows 7)

  There was information about sticky notes that disappeared. How can I get it back?

  Hey! Click Start, and then click Notepad. I don't know if you can find the info you had on this subject. I just tested it, and I typed in her salvation... then clicked on the desktop, then click the X button in the note and I opened it again to the top and he wasn't there... You can pin the sticky notes to the taskbar, typing sticky notes in the start menu by dragging and dropping on the taskbar. Hope this helps

• After that the iOS put 9.3.1 update my Ipad wifi conectivity range has become very short

  As the title says.

  I've also updated to 9.3.2 and still have the same problem. I have a model wifi / 3G ipad, 3rd generation, I think.

  We have 2 other iPads (both don't upgrade 9.3.2 no worries, but they are only wifi models) connected to our network of origin 2 PC and more a PS4, who have no problem and no settings have been changed.

  I have the same problem with my wifi connection post update work and wifi to work is in another country altogether. None of these settings have changed either and all my other devices connect. I use a lot the flight mode.

  If I'm sitting within 5 m of the router, wifi iPad will connect. Anything over that and it won't.

  I tried to reset network settings. I also did a factory reset after saving everything. Tested the connectivity fees before you load my backup and had the same short connectivity problem.

  Can anyone think of a solution without having to hold my iPad from Apple store, as it is not an official at the Apple store in many countries of me at the present time, although there is an Apple "chop shop" in the local mall for repairs of screen which I'm really not want to use.

  Thanks in advance

  Double check, it's a 4th Gen iPad (model A1460) and I would have added an edit to my original note if I knew how.

• Snapshots kept long enough for when the Active Directory computer account password has expired - this has been noticed after the restoration of a completed snapshop.  No matter what other configurations out there to address this nuisance?

  I'm curious to know if anyone has implemented a solution to this problem?

  In the AD, a computer account renews his password every 30 days so I think depending on when a snapshot is restored, it may be at a point where the computer account in AD password isn't at the height and which adds a task for the Admin network to readd the computer to the domain.

  So, the longest that a snapshot will remain without any problems is 30 days and the shortest is 1 day.  It depends on the last time the automatic password renewed computer and when the snapshot was taken.

  It's a bit of a pain.

  I'm curious if this is pretty typical and everyone just accepts this manual process?

  Or if some have implemented a solution to work around this problem?

  Thank you!

  There are a few articles Technet (see examples below) that provide information on how to change this behavior. However, keep in mind that it is one updated security related, so consider carefully if we need to change this option in a production environment!

  https://TechNet.Microsoft.com/en-us/library/jj852252.aspx

  https://TechNet.Microsoft.com/en-us/library/jj852191.aspx

  André

• Yahoo homepage has changed after the update of firefox 33, how to fix? home page looks normal on chrome and explorer, only different in mozilla, please help me

  my start page since always yahoo, after 33 of firefox updated itself, the page quite a bit bizarre, his yahoo but not as the ordinary classic. I can't seem to go back even when I cut and paste the web address off chrome or explorer, where the yahoo page looks like classic its normal self. WHY is it be changed in mozilla firefox 33? I know in firefox 32 it is normal, when I go in chrome or Explorer, it looks good and yet not flip over in my mozilla firefox even though it uses the same adresse_web. Its driving me crazy, please tell me I'm not the only one this has happened (today 15 October, 2014) and what I can do to heal/fix and do go back to the way it was.

  HI, I understand that the start page no longer appears as before. I'd be happy to pose for a screenshot of the page so that we can investigate a bug for it, but in the meantime it may be useful to use the previous version.