No display memory card

Similar Questions

• OfficeJet pro 8600: officejet pro 8600 memory card error - any inserted memory card

  I am connected directly to my Lenovo Thinkpad laptop and I can print, but I can't copy, scan or fax. The touchpad display memory card error. It is plugged into a wall outlet and I did a hard reboot.  Not sure if my Windows 7 is 32-bit or 64-bit.

  I don't see any private messages.

• error message "memory card error" with a SD card on C5180

  Photosmart C5180 displays 'memory card error' when SanDisk SDHC inserted.  (The map is not damaged, it is new & working behind closed doors).  I was not successful in finding answers on the HP site.  Any help most appreciated.  Thank you very much.

  Looking at the specifications, I see memory 'High Capacity' (SDHC) is NOT supported on the device:

  http://support.HP.com/us-en/document/c00701803

  I also checked with our group in San Diego - SDHC is not supported.

  ~ TechHelper7

• The display of images on Scan disk memory card

  Scan disk memory card

  How can I get my pictures up when I insert my card memory ScanDisk from my camera. When I put it in my computer, it comes up with autorun and nothing else and my pictures do not show.

  Right-click on my computer and select manage.  On the next screen, click on disk management.  Look on the right side of the screen, and the memory card should appear.  Right-click on it and he assign a drive letter.  Now, it will be displayed in Windows Explorer and you can import from it.

• Need to format the drive G to display the images on the memory card

  Original title: WHERE IS G drive? And why my memory card no longer works?

  I'm seeing pictures on my memory card. My windows vista says I need to format disk G, but it won't let me. When I look at the drive in my computer, it says card xD-Picture Card G. It said SD Canon. What happened and help? !!

  Hi Camper17,

  1. you remember to make changes to the computer before this problem?

  Step 1:

  You can try to change the drive letter and check if it helps.

  Access the link below to learn more about changing the drive letter.

  http://Windows.Microsoft.com/en-GB/Windows-Vista/change-add-or-remove-a-drive-letter

  Step 2:

  Also check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the device name in the list of Bus USB controllers.

  c. If you see the item on to the SD card, right-click on it and click on uninstall.

  d. restart the computer and check if that helps.

  You can also connect the USB cable for the canon camera and see if it helps.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP C5180 AIO memory card reader. Trying to open the memory card, Windows 7 displays the error message "the handle is invalid."

  "Computer" shows the memory network card.  When you try to open it, I get the following error message...

  Location is not available
  Y:\ is not accessible.
  The handle is not valid.

  If I right click the icon and select 'Properties', then the properties of memory card appear properly.

  This memory card and HP C5180 work correctly on a Windows XP computer.

  HP C5180 is connected ethernet.

  You have installed the drivers of http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&lc=en&cc=us&dlc=en&lang=en&cc=us

• I downloaded the beta version of firefox on my galaxy is that it shows that it is installed on the memory card but it occupy space on the internal memory of my why?

  When the application displays data 2.3 MB and 20 MB other data stored on memory card why my memory 24 MB busy beta of firefox.
  Why is it so big when opera mini is so small and efficient.
  is it works on as ucweb download.

  Hello atuljains, mini opera unlike firefox for android is a full browser and contains its own rendering engine. Firefox use as little RAM and storage as possible, but there are limits and its requirements are similar to those of other full browsers like chrome or opera (not the mini version).

• How to get RSS feeds on the Journe Air 801 via the external memory card?

  I bought the Journe Air 801 digital photo frame and the manual says 'save the RSS feed of the album that you want to display in the .rss format and add to the external memory card', but he said not how you create this .rss file or copy it to your memory card. Anyone know how I can get a picasa rss in this format?

  I've successfully added a picasa feed manually in the framework but as picasa updates only the RSS if new galleries are added, not new photos, the photo feed is not updated on the frame so I would change the rss address.
  Thank you

  Hello palomaroma,

  I am also a user of Journe Air 801.
  To add RSS feeds, please install the software from the disc attached.
  Insert the sd card into the frame. Connect the frame to your computer.
  Start the Photo Frame Wizzard. Flow RSS Acount (s) is displayed.
  Now you can add RSS feed addresses.

  Best regards

• No download memory card reader

  My computer is a HP Pavilion HPE-210F model.

  I use Windows 7 Home 64-bit version.

  The computer cannot read my Xd picture card when it is inserted.

  When I go to the Manager of system properties/devices and scroll down for disk drives, listed are 4 card readers that can identify the computer working. I am using is the device USB SM/xD-Picture.

  If I right click and select Properties, it says it works Ok.  I tried to leave the computer to upgrade the driver but it says that the installed drive is fine. Ok

  Hand-held devices, he says I have 4 WPD files Volume drivers each with a scream on them and if I right click on each of these and select properties it gives me has this device cannot start code (10). I deleted all file system drivers and let the computer restore top drivers, but it does not solve the problem with the exclamtion point.

  Using either the software provided with the photo gallery live microsofts camera or use, I still can't download

  When I insert the card into the slot. A green light comes on telling me that he recognizes the card and a small icon will appear in the Task Manager, but if I go to 'My Computer' it does not show a player work as you can see, with a CD player. When I connect the camera with a USB cable it will appear in 'My Computer', such as registered and displays an image of a disc like post photos...

  Also, there are 2 USB ports alongside the locations of memory card and they work very well as I have it plugged the camera into one of the slots and the computer registerd the camera.

  The map just do not work in my player, but work in the camera?

  If it's the pins how you can staighten them, I can barely see inside the slot.

  I think its this driver WPD file system, but I do not know how to change.

  The camera is an Olympus Stylus 830 photo Xd Olympus M 2 G card.

  Any advice would be greateful.

  Portable devices like the photo card reader to be attributed to a F, G, H and I drive letter depending on the number of dwellings of readers you have in your pc. Chances are you don't publish a drive letter for drive cards and instead of this you see something like

  WPD filesystem with a driver several times exclamation point because your system can read several types of cards, but you have not issued a drive letter for the berries.

  If you open the control panel and administrative select Tools, computer, in the section storage management, clck disk management all your hardware, you should see readers for your pc. Make sure that you assign a drive letter to each card reader device, so he gets a letter.

  Restart your pc

  Next time you open Device Manager, you will see a letter for each of your devices portable drive instead of the system drive of WPD files with this exclamation point.

  Insert your memory card and it should be able to read.

  Why windows doesn'r just assign a drive letter automatically for readers of I don't know

  Worked for me...

• Memory card SD in 5200-902

  Hello

  My 5200-902 does not recognize the SD card.
  The SD memory card reader is recognized by the computer, but not the map. The problem occurs in 2 steps,
  the first step: the computer makes kling klong when I insert the card, but he was not recognized or is indicated as reader in the eyxplorer.
  step 2: after restarting the computer, there is no kling klong longer when the card is put.
  And the map is not displayed in windows Explorer.

  Only for a very short time, the green light is on when the card is updated.

  Until today the card works properly on this computer.
  I used a different card with the same negative results.

  All the solutions for me or proposals for tests?
  Thanks in advance.

  Jürgen

  Post edited by: JuergenL

  Hello

  Have you removed the SD card safely?
  Usually, if the SD card has been used the small icon should appear in the taskbar with the message: remove the drive safely.
  If you n t use this option and put the card without removing the card safely for the card or the slot can have a default.
  I recommend you remove the controller from SD card from the Device Manager, and after restarting again try to reinstall the drive

• Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  MacBook details below?

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Thank you

  gis_abc

  

  He seems to show NVIDIA graphics card.

  Kim

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Memory card reader

  I have a Pavillion s5202f who had card readers normally drive h: and on my printer Photosmart 2750 I.:  After checking a memory card, I used "Eject" before the withdrawal of the card.  Now, card readers are not displayed and there is no AutoPlay to insert a card (the card works in another computer, so it is not the problem).  I tried to go to Device Manager and it does not show something like "generic card reader" discussed in the FAQ.  I also tried a diagnosis with the HP Support Assistant, and it does not appear to look at the card reader.  Any suggestions on how to reactivate the card reader (s)?

  You can try to remove the USB root hub in Device Manager. They will repopulate when you restart and maybe find the card reader then.

• How can I transfer my digital photos on my memory card on a flash drive?

  Please tell me how to transfer digital images to the memory card from my camera on a flash drive

  Almost all devices digital camera comes with a USB adapter cable to plug into a USB port on a PC. Use the supplied cable and you should find it easy to transfer photos from the camera to your PC via Windows or software of your camera. Once that is done, use Windows Explorer to copy (drag / move) pictures from your PC to the flash player (you don't specify what type it is).

  What is the brand and model of your camera?

  Please to identify your computer.

  Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

  Numbered headings 1 and 2 on the following example of a laptop HP barcodedimage. Your bar code may be slightly different, but will always have the necessary important imformation for us to help you.

  #Don't post not the serial number, as it is personal information. ###
  
  Display the version of the operating system installed (and whether 32 or 64 bit) and if the processor is an AMD or Intel product

  Not showing information as requested will delay our responses and troubleshooting slow the question that led you to create a thread.

  Is your laptop / PC still within its warranty period?

  Best regards

  ERICO

• New printer HP 8600 how transfer photos from a memory card to the computer wirelessly?

  HP 8600 printer, put the card in the slot, desktop do bed not the map?  What should be my next move?

  Please specify

  First, click on the wireless or on the network icon at the top of the screen of the printer.

  Locate and note the IP address.

  Then, from your keyboard, press the Windows Logo with the simultanly key 'R '. the run dialogue box is displayed

  Type the IP address of printers with 2 backslashes to forward (for example \\10.0.0.1).

  Click on enter.

  Right-click on the folder of the memory card, then select map a network driver.

  Follow the steps and will be created a virtual disk with the contents of the card reader. You can access it from Windows Explorer, under computer.