No ISDN option on tandberg 770 mpx

Similar Questions

• Tandberg 770 MXP power adapter

  Hi all

  I have a few question for you guys.

  I am aware that Tandberg 770 MXP is EOL and Tandberg was bought by Cisco.

  Anyone know where I can get the power adapter?

  Please notify

  Best regards

  Titebiket

  Because it is a product of end of LIFE, it is highly unlikely that you will find the exact replacement part.

  Based on this discussion, you should be able to use only compatible power supplies of the same voltage and amperage similar.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• SX20 and link ISDN with TC6

  Hi guys,.

  I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call.

  I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.

  I use H323 network and I don't use SIP between SX20 and ISDN link and with the old version, I could receive and make calls. Now when I try to dial the ISDN using the new interface TC6 endpoint indicates that it does not find the ISDN link.

  Thank you for your help,

  Adrian

  Hi Adrien, Valentine's day.  Theres something happens with outgoing enabled on the link and the Codec for this, and we have two CDETS opened on them.  There are always SIP service is enabled on the Codec with link and link itself.  Codec uses IPV6 local links for the link itself.  Even if the sip xstatus on the codec has its inactive etc, the codec message still SIP REGISTER to the device registration link.  Link runs a FWD SIP process that handles the request.  Sorta like a mini SIP registrar if you want.  Codec will send the message to REGISTER using link-local IPV6 address.  Example of message is less than 200 Ok.

  77582.64 SipPacket PacketDump: Proto: SIP, name: REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0, Direction: outgoing, RemoteAddress: [0000::000:0000:0000:cd39]: 15070, GroupEntity: b27d07c1f5f298c492db68040b320ca6, time: 77582634 content:!

  77582.64 SipPacket REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0

  77582.64 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport

  77582.64 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.64 SipPacket CSeq: 47083 REGISTRY

  77582.64 SipPacket Contact:

  «': 5061; transport = tls >; + sip.instance =»

  77582.64 SipPacket of:; tag = 116a994ac2281c72

  77582.64 SipPacket to:

  77582.64 SipPacket Max-Forwards: 70

  Road to SipPacket 77582.64:

  77582.64 SipPacket allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM

  77582.64 SipPacket User-Agent: TANDBERG/518 (TC6.0.0.876266)

  77582.64 SipPacket expires: 3600

  77582.64 SipPacket authorization: Digest-nonce = "d9605a7da8be22af8c0e7f52b3de4a5f5125fcd3", domain = "MARCIE", qop is auth, username = "djkvvknn", uri is "sip: [0000::000:0000:0000:cd39]"

  ", response ="3b27b753cb9bcf38cc2431b767bce643", algorithm is MD5, nc = 00000002, cnonce ="84addca2a68f6c5f9b657a94653a4bae"

  77582.64 SipPacket supported: replaces, timer, 100rel, gruu, way, way out

  77582.64 SipPacket Content-Length: 0

  77582.64 SipPacket

  77582.64 SipPacket >!

  -----------------------------------------------------------------------------------------------

  77582.65 SipPacket SIP/2.0 200 OK

  77582.65 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport = 41246; receipts = 0000::000:0000:0000:c52a

  77582.65 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.65 SipPacket CSeq: 47083 REGISTRY

  77582.65 SipPacket of:; tag = 116a994ac2281c72

  77582.65 SipPacket to:; tag = e84d13204776ebc2

  77582.65 SipPacket server: fwd

  77582.65 SipPacket Contact:; (+ sip.instance =""

  77582.65 SipPacket Content-Length: 0

  77582.65 SipPacket

  77582.65 SipPacket >!

  -------------------------------------------------

  I removed my own addresses, so you get the picture here.

  It is the same for the link.  Link will send REGISTRY as well to himself.

  Even if your using H320 as outgoing Protocol call, messaging between the codec and the liaison unit is still SIP as the outgoing call is still SIP of the codec for the link even if you chose H320.

  You can see all happening all by running: Journal ctx sippacket debug 9 and connect the output to see the messaging back and forth between devices.  This is why the Service SIP on the codec cannot be disabled.

  The outgoing enabled on both devices and it records not as what Adrian has met is odd. So the question has been filed and is under investigation.

  CSCue57128 - SIP in a strange state connecting to link ISDN (Codec)

  CSCue73049 - outbound SIP on ISDN link activation causes lose her registration (link)

  These are new, so the visibility may not be there yet.

  If you see a problem with the link is not not able to register, check to see if outgoing SIP are enabled on the link.  If so, turn it off and start.

  Do the same on the codec as well.  Disable outgoing SIP and restart the computer.  There may be some cases, you do not see this, as the investigation continues with the bug above two ID's

  I hope this helps.

  VR

  Patrick

• Qosmio X 770 - are looking for best free video player to play with 2D to 3D movie

  I have a Qosmio X 770 with NVidia 3D playback. I'm looking for the best free video player for playback of video clips 2D to 3D.

  Toshiba Video Player works fine, but I can't get it to play files in MP4 - AVC format. Is it possible to add codecs so it will play other formats?

  NVIDIA 3D Vision Player don't play all formats but when in 3D mode, there is no access to the commands. Volume can be set with the function keys and video can be suspended with combinations of keys that do not forget, but you can not fast to the front/back or access the slider to change the video position.

  Both are reasonable solutions, but none is perfect. Is there a better option out there? I tried StereoscopicPlayer but could not operate and it is limited to 5 minutes of play in any case.

  Both are reasonable solutions, but none is perfect.

  Software freeware as a perfect solution?
  I don't think you will get this software just for free...

  How to convert 2D to 3D in 2D to 3D converters movies?
  The KM Player supports also the 2D to 3D feature but does not support all formats... you have to pay for the full version get full support.
  Of course as large PowerDVD, but not for free.

• Qosmio X 770-access BIOS

  I have a Qosmio X 770 that running Windows 7 Home Premium 64-bit OS. I can't access the BIOS. Turning the power on, press F2 brings up the options "start windows 7", "Diagnosis of memory startup" or "Press F8. F8 then gives the normal safe mode options. Selecting F12 to the beginning toward the top, does nothing. The selection of some other keys at startup to replicate by pressing F2.

  HWsetup allows some access to the BIOS, which allows me to change from fast to slow start and to change the boot order, but nothing I've tried so far allow me access to the BIOS before starting Windows with the exception of removal of the C drive.

  The problem exists with the old BIOS and exist with the hard update. I don't know when the problem began, he did years that I finally tried to access. My most previous system restore point, for some reason, only goes back to September 2, just before I made an image of the system. Restore to this point has not helped.

  I can't think of anything else that might be relevant for the moment.

  I thought of something else, the Toshiba start screen does not show in a safe, Normal, or fast.

• Qosmio X 770-4 GB of RAM not shown

  I have a Qosmio X 770 with two 4 GB RAM modules installed, but the details of the system show that the total system memory 4.00 GB of RAM.
  It also shows that 4 CPU cores when there are 8 shown in Device Manager.

  If I get either module of RAM, the system always displays the 4 GB of RAM.
  Either chip in each slot is 4 GB but nothing I can to build the system to show 8 GB.

  What is going on?

  Hello

  I assume you are using Win 64 bit...

  The 64 bit OS is able to manage more than 3.2 GB RAM... the question is therefore probably linked to incorrect parameters in the msconfig.
  Go to msconfig (in the search type msconfig)

  In the 'STARTUP' tab click on 'advanced options '.
  Then uncheck the box stored up , and then click OK

  Then the limit max memory should not exist.

• Qosmio X 770-13 g - Tunrs off everything at stake

  Hi @all,

  I ve you have a big problem with my Toshiba Qosmio X 770-13 g.
  I ve never user NB for the games, but now vacationing with the bad weather, I installed games like Counter Strike cs or project cars.

  After 10 to 20 Minutes (sometimes more short game, even with CS) the laptop turns off.
  I m thinking of heatproblems. I installed the software to check the temperature. I see him, which runs before turning off, the temp of GPU´s is greater than 90 degrees celsius and the temp of cpu´s is also > 90 degrees.
  I think that the connection of in this moment is the right thing, but why the NB becomes so hot? It s for games so wtf? ! ?
  There is no dirt inside.

  What I have to buy special cooling equipment to play with a mobile game?

  With the help of I m Win 8.1 64 bit with the latest version of BIOS and drivers...

  What I have to live with cela or is there a way out?

  Help, please...

  After 10 to 20 Minutes (sometimes more short game, even with CS) the laptop turns off. Thought I m of heat problems

  Yes, this could be a temperature problem.
  In most cases that the laptop turns off automatically due to the higher temperature... auto shut-off prevents the parties from damage.

  I think that the connection of in this moment is the right thing, but why the NB becomes so hot? It s for games so wtf? ! ? There is no dirt inside.

  It has been done for the games, but different parameters allow to control as well as performance of the GPU and CPU cooling performance...
  so you probably need to check it out.

  First of all, I recommend you to go to the windows advanced power options, and here, you must set the 'method of cooling' performance (for the battery and power supply)

  You can also decrease the performance of the max processor at a lower level; 90%-95%
  This would not affect performance of the laptop, but it should help to reduce the dissipation of heat.

  In addition, the laptop must be used on the table... all the ventilation openings must be free to ensure good air circulation. It is also important to keep dust free fans...

  You must also use the drivers at Toshiba graphics cards because the GPU drivers available on Toshiba pages are modified for mobile use.

• Cannot read disks 3D on my Qosmio X 770

  Initially, I had no problem with a laptop Qosmio X 770 3D DVD to play.
  For some reason, now, 3D glasses do not work - that is, they are getting started, but they convert the 3D stereoscopic images.

  I got glasses for more than 3 hours of charging, and when it is plugged into the laptop they show a constant amber light, which means that they are fully charged.

  When you unplug them, the light turns off and nothing happens when you focus on the 3d video.
  Nothing happens when leave you them plugged into the laptop via USB no more.

  I thought I would try to watch the DVD without 3D and disabled the 3D option in the 3D Corel player; However the software just tells the viewer/screen is incapable of the 3D view and move to a 3D-capable display.

  Corel player won't play the DVD in 2D. No one else does--not even own Toshiba player - won't play a 3D DVD. When I brought the laptop I was told that on this model only the Corel 3D player would work with videos in 3D.

  I guess that the glasses are deceased, but is it possible that I could watch a DVD as a 2D to 3D?

  Thank you.

  As far as I know (I may be wrong m) you can convert 2D to 3D, but you cannot convert 3D to 2D.

  Regarding the question:
  It of difficult to tell if the problem is related to 3D glasses so it would be interesting to know if another 2nd pair of glasses would work properly.

• Qosmio X 770: multimedia function backlit buttons does not

  Hello

  I've had my x 770 for about 6 weeks now and about two weeks ago that the function buttons multimedia backlit has stopped responding. The rear lights are always on but nothing happens when I touch them.

  I uninstalled and reinstalled the value-added Package but that did not fix it.
  I ran the recovery Partition Toshiba and factory reset, but that did not fix it.
  I uninstalled and reinstalled the value-added Package (yet) but that did not fix it.

  The button in "HWSetup" setting is "enabled" for buttons and sounds. I also tried remapping the buttons using the ' button '.

  Can anyone think of something that I missed? Does anyone else have this problem?

  > I ran the recovery Partition Toshiba and factory reset, but that did not fix it.

  It's really strange that this function does not work even if using the recover Toshiba HDD and the laptop back to factory State.

  Please check the BIOS settings.

  In my case there is an option called Illumination and I can enable and disable the lighting directly in the BIOS.

• Qosmio X 770-n404 how to get enlightenment to stick IT in the Bios?

  Just got a brand new Qosmio X 770 - n404 toshiba last week

  The words of the enlightened fine keyboard when turn on
  However when it is off, and lighting set in the BIOS on it, it will not stay on after windows startup

  I will go back to the Bios and it said light off
  How can I get the illumination to paste IT off in the bios?

  (I'm talking about the illumintion option, no keyboard backlight)

  Hello

  Before you let the BIOS must * save changes * after enlightenment was defined on IT.

  Check it out!

• Ubuntu for Qosmio X 770 necessary drivers

  Anyone know if there is no driver for the X 770 Ubuntu, for example to adjust the brightness of the screen, as with installed my screen runs a full backlight t which is a tad birght.

  Thank you

  Graeme

  Don't think that you will find the Linux for a Toshiba notebooks drivers.
  Linux is not officially supported for any Windows operating system.

  Recommend you check some Ubuntu Forums for other options.

• Qosmio X 770-screen black on startup

  I have a Qosmio x 770.
  When I try to start, it starts normally, but the screen does not light. I hear the welcome sound of windows, but I see nothing.
  I searched the forums and found a solution that works.

  I shut down the laptop, remove battery and power cable, and I press the button power for 30 to 60 seconds.
  Then I boots as it should.
  It works for now, but something is wrong.

  PS exuse my English, not my native language.

  Best regards
  Jim giras

  Yes, something is wrong, but to resolve this issue, it needs to be important to reproduce the problem.

  Does happen to you while awakening from sleep / standby or hibernation mode?

  The fact is that during the standby / sleep or hibernation of the data will be written to the memory or HARD drive, and no doubt there could be a problem with the wakeup option.

  On the other hand, it would be interesting to know whether the system recovery (settings of the OS back to factory State) would improve the features.

  We don t know exactly how the system has been changed in the past and so it would be a good idea to test the laptop with a pre-configured system.

• Qosmio X 770 doesn't wake up

  I have a Toshiba Qosmio X 770-116, part.nr PSBYSE-01N013BT, a serial no 8B088257K.
  Windows 7 Home Prem is installed.

  Usually, when I stop working, I have closed or I use normal sleep.
  The option was there to also choose a deep sleep, I wanted to try.
  Unfortunately my laptop won't wake up more.

  When I push the power button, I can see the (red) power button light and hear the fan.
  In addition to that: nothing.

  I read on the internet that there are many problems with the deep sleep.
  One of the things was to remove the battery and RAM memory for 30 minutes, but that did not help for me.

  Can someone help me with some advice?

  Thank you

  You mean with deep sleep, hibernation mode, right?

• Re: Qosmio X 770 - keyboard backlight timer

  Hello

  I have just purchase a Qosmio X 770 and would like to know how to increase the timer to backlight the keyboard above 1 second. I would greatly appreciate anyone letting me know how (if possible).

  Thank you

  Hello

  I n t have this model of laptop, but I assume that these parameters are similar for notebooks.
  Open Toshiba Assist > Optimize > HWsetup and you should find options for the keyboard and the keyboard backlight.

  Please check it out.

• Qosmio X 770-107 - question GPU acceleration and low of the FPS game while

  Hi all

  As everyone knows (i) hope including Toshiba tech we face breakdowns of sparks/Framerate GPU limitation/Low FPS during the game, even in the game of old or new brand and down or in the highest video settings.

  So lets start with the history of the mine: I bought my Toshiba Qosmio x 770-107-3D about $2600 so I was in Qatar to the 13.04.2012... In fact since the beginning of the purchased when I am faced with this famous problem of limitation GPU... I tried a lot of things, cleaning the fan, bios and driver chart updated-decommissioning, using software overclocking, combining different versions of graphics drivers with different versions of bios drivers, also including the suggestions in this tread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63615

  2 days ago, I sent an email to Toshiba UK support and local support. Unfortunately I have no answer, I probably wouldn't be as usual. And I left one term of 7 months. As everyone knows; even if I sent it to Toshiba repair service, 99% they say the fault of the user or the dirty vere fans and we reflash the bios. who has no sense for us and they're going to get him back without GPU acceleration problem soving...

  In summary that I am out of options, I'm really tempted to try to solve this problem of trottling gpu...
  Maybe I should sent cell phone service and with their report of nonsense I should consider rights costumer Court in my country... will be 4 to 6 months, but in the end 90% I win.

  I am really bored and tired of playing the games lag in every 10 minutes.
  Yesterday, with and without external display, + with slot and overclocking, + video settings further down, I played Company of heroes 2 and Battlefield 2 and 4 with ventilation of the limitation and the new GPU framerate... it's totally waste of money and my time of 2 years. I want to buy alienware instead of Qosmio 2 years...

  What should I do? You really have a permanent solution for this? I await your comments.

  Win7
  BIOS v2.10
  Graphics driver v33x.x

  Kind regards.

  I read the reviews of users and customers in the thread you link above and it seems that the limitation issue was already resolved. The combination of the BIOS (v1.1?) and nVidia Driver seems to be the key.