General map share

I develop an application that creates a small html file. I would like to invoke the same share of map that you see when you share a file on the file manager, BBM, email, Dropbox, etc.

I have tried many different combinations of actions, mime types, targets, can't seem to get what I want. It calls for a specific application, email, evernote, hubic, or open browsers or nfc Division.

Any ideas on what I'm missing?

Thank you

I have a code snippet on how to do it in this post: Re: invoke sharing card in C++

It can be done in QML as well with similar settings.

Tags: BlackBerry Developers

Similar Questions

  • I can't share my Wifi using Intel my WiFi utility

    I use ACER 4830TG more than a year & I am pretty satisfied. My problem is that I have a Nexus 7 (WiFi) & I used generally to share my wifi PC internet using my WiFi utility intel. But for a few weeks, I am unable to share my Wifi using Intel my WiFi utility. It shows always connect & disconnect info with in a few seconds. But if I share my Internet then it connect with my Nexus 7 & of course, I'm not able to use internet then. Need urgent help please. BTW, earlier, I tried intels new dashboard 15.1, but it does not support my WiFi adapter. So, I rolled back & connect with a common, but now I can't!
    My WiFi profile current settings:
    Security: WPA2-PSK
    Type of encryption: TKIP
    Filter network traffic: disabled
    DHCP and DNS server: enabled
    Default channel: 3
    No device is blocked!
    BTW, I used to connect to the same profile settings, but now it is connect any more.
    Need urgent help please

    Hi Ryan,

    Thanks for posting in the Microsoft Community Forums.

    I understand from the description of the issue, that you have problems with wifi on the Windows 7 computer connection sharing. I will certainly help you in this regard.

    I appreciate if you could help me with more information.

    -Don't you make changes on the computer before this problem?

    Method 1:
    Firstly I suggest to enable network discovery and check if this helps you solve the problem. To do this, please follow the steps below:

    (a) Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the navigation pane, click change advanced sharing settings.

    (b) to increase the profile of the current network.

    (c) click turn on network discovery, and then click Save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To learn more about this feature, please visit the below mentioned link:
    http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

     

    It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.

     

    Method 2:

    I wish that you disable the Windows Firewall as well the antivirus temporarily.

    View items-

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

    Method 3:
    Also I suggest to run a network diagnostic tool and check the hope that will solve your problem.

    To make this problem troubleshooting, please follow the steps below.

    (a), click on Start > Control Panel.

    (b) click network and Internet, click network and sharing Center.

    (c) under network and sharing Center, click on solve the problem.

    For more information about how to resolve common network problems, please see the links below:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Back to us for any problem related to the Windows operating system. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

  • Windows Search find files but the mistakes of some of them, which are open normally when it is accessed to follow the path of the error opening

    My client uses Windows Search to help track the files in a fairly large groups. Indexing and everything seem to work very well, but when the user performs a search, it returns the information that are expected, but when you click on some of the files that it generates this error:

    "Cannot find 'file:///s:/XXXXX/XXXXXX.pdf'. "Make sure that Internet address or pat is correct.

    (where XXXX/XXXX are the path and name, of course. It varies and is not a specific place, or all in the same places is originally the same error)

    Varies depending on the issue and the only consistency I've found is than that error all tend to share the same name of 'Owner' and those who work divides different. Yet once again, the 'owners' vary. When browsing directly on the elements, following the exact path in error, the files open fine. In our case, 's:' is a mapped network share, but which seem to be the question either, as the other files in the search located on the same mapped share and in the same directory path work very well.

    To make it even more confusing, the search of all works perfectly on another computer. All users have the same access right, reading/writing/execution, in the cases in question. The file doesn't seem to be open and in-use by other users.

    The system in question is running Windows XP Professional SP3 and is connected to a domain active directory running Windows Server 2003. We have tried to do, and it did not help.

    Any ideas? Thanks in advance for anything that can help you!

    -Sean

    Hello Grouchy_M,

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the category of server on Technet. Following your question thanks for posting the link below:

    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Backup: Problem access another network driveBackup, tips from other users

    Hello everyone. I'm trying to use my NAS backup function to copy a file .rar from a share on a different network drive - a little old Maxtor SSD - but I get an error message:

    "Can't access the remote path / / 192.168.0.13/sauvegarde/Work.rar.

    The file in question resides on a mapped share that Windows has no trouble to have access to, but NAS can't seem to. How can I get the NAS to authenticate for the SSD?

    Thanks for listening. I hope someone can help. The usual disclaimer notice for my ignorance apply.

    Them

    ReadyNAS NV +.

    Windows 7 x 64

    Maxtor Shared Storage Drive

    That seems to have been it. With a folder instead of a file as a target, it works. Thank you 1 million.

    I must say that the error message "Unable to access remote path" is not very useful...

  • Ix2 Lenovo how to download several files/folders at the same time?

    Hey, my team and I use the Lenovo ix2 because most of the free services, we discovered can legally steal your work. We have a log of things back and wish I could just download it in one fell swoop. It is that none of us are qualified to layout network or ilk. Which brings me to my question:

    Currently if you add a file you can add is a file at a time. Is there a simple way to be able to download a bunch of folders with files in them at the same time?

    Hello dmurtha,

    Here is a link to our support page, where you can find the manual of your device:
    https://Lenovo-na-en.custhelp.com/app/home

    Once you have a mapped share, it essentially functions as a local disk.
    https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how%20To%20Map%20A%20Ne...

    What this means to you is you can copy and paste, drag and drop, files or directories to the mapped share and everything in this file or directory is copied to.

  • Lack of Service SM BIOS driver?

    You seem to be missing the driver of service SM BIOS...

    I thought it was part of the driver chipset but installing it didn't solve it. I have run the utility was updated and that does ' t get the driver to make it.

    Any ideas guys?

    Link to photo

    The warning flag does not mean that it is not installed it is. But it does not properly. I might be a missing service or not started but generally its share of the chipset driver for the model.

    I'm guessing it's from a media installation not OEM.

  • Simple network file sharing XP Home Edition

    I have windows XP Home Edition 2007 Service pak 3. I can't share files on the network. In the network > tools > there is no file simple file sharing check box

    "Simple file sharing" is applied (always enabled) for Windows XP Home editions.  Only XP Pro editions can disable Simple file sharing.  This does not mean that you can not share files.  Generally, you share folders simply by doing a right click on a folder and selecting:
    Properties-> sharing (tab)-> share this folder.

    You must also have the file sharing and printer installed and active on your computer.  More about here:
    "You can not access the shared files and folders or browse computers in the workgroup with Windows XP"
      <>http://support.Microsoft.com/kb/318030 >

    HTH,
    JW

  • Missing SMB connection

    Windows 7 Pro (via the VPN tunnel) client can connect RDP, SMB and PING to a server (Server 2008), but cannot map shares SMB (FQDN or IP) of server B (Server 2008 R2). Can RDP client, HTTP/S and the PING to Server B. The two servers are in the same segment of network and sitting on the same VMware host.

    Any help would be appreciated.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

  • Why has my transit of mercury for 2nd monitor gone haywire?

    Hello

    I have always used the Transit of mercury to a second client monitor. Since the update to 2015 CC, I had this problem with my first.  Rather than send the program on the TV from the client, it uses the corner of my primary monitor. I think it's just around the corner, because of the monitor 4 k, as he tries to send a 1080 p on the TV signal.

    This screenshot should illustrate:

    http://i.imgur.com/8zVxxoZ.jpg

    I'm on Yosemite and the graphics card is a GTX970 - the TV plugged into the HDMI and the monitor connected via displayport. I didn't have any other problems with the General map or use in other software.

    I tried the main interface of the first passage to the TV and then Transit of mercury to use 4 k monitor for reading and who worked as expected.

    Any ideas?

    Update: I changed my primary monitor on OSX (by clicking and dragging the white bar in the settings screen arrangement) on TV and then dragged the interface in my secondary screen (screen 4 k), using the transit of mercury for monitor 1 (TV). Works fine for now.

  • P2V defective after installation of the Converter Agent, unknown error produced to the customer

    Hello! I need help with that on:

    vSphere Client 4.0.0 build 208111

    vCenter Server 4.0.0 build 208111

    Host ESX 4.0.0 build 261974

    Company agent Converter 4.1.1 build 20617

    Source of Windows Server 2003 SP1 x 86-HP ProLiant ML370 std

    Trying to P2V using "Import Machine" vcenter. After that the converter Agent is installed, the Import Wizard displays an error: unknown error produced to the customer. After you click OK. The VI client ends.

    The source servers and ESX host are on a place other than the vCenter, but on the 'same' network. Other P2V in the same place are passed without problem.

    VMware converter - client.log:

    Journal for VMware Converter Enterprise Client, pid = 4408, version = version 4.1.1 = build-206170, option = release, section = 2

    Current working directory: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Plugins\Converter Enterprise 4.1.1

    HOSTINFO: See Intel CPU, numCoresPerCPU 2, numThreadsPerCore 1.

    HOSTINFO: This machine has 1 physical CPU, 2 total hearts and 2 logical processors.

    Recorder P2V created

    Initialize SSL

    Using the libcrypto, version 9070CF

    Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

    Created SSL context

    AppInit finished

    Start of the execution of a task

    By ensuring that this interface UFAD version vmware converter - 4.1.1

    SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. 172.25.17.19

    SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

    • Used to connect host name does not match name the object on the certificate of the host

    • A certificate of the host string comes from an untrusted root.

    SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

    UFAD interface version is vmware-converter - 4.1.1

    Execution completed the task

    Start of the execution of a task

    SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. osl1019

    SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

    • Used to connect host name does not match name the object on the certificate of the host

    • A certificate of the host string comes from an untrusted root.

    SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

    Connecting to host osl1019 on port 443 using the https protocol

    SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. osl1019

    SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

    • Used to connect host name does not match name the object on the certificate of the host

    • A certificate of the host string comes from an untrusted root.

    SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

    Execution completed the task

    Start of the execution of a task

    Connection to IPC$ on 172.20.2.10 as domain\user1

    Manager of SMB: host has already had a different share mapped with conflicting credentials.  Could not map share http://\\172.20.2.10\IPC$.

    Task failed: P2VError REMOTE_UFA_CREDENTIAL_CONFLICT_ERROR (172.20.2.10)

    Start of the execution of a task

    Connection to IPC$ on 172.20.2.10 as domain\user1

    Successfully connected to IPC$ on 172.20.2.10

    Connection to
    172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

    Unable to connect to
    172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

    From vmware-converter on 172.20.2.10

    Could not open service handle to with 983103:1060 level access

    Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

    Failed to start the vmware converter service

    Connection to
    172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

    Unable to connect to
    172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

    From vmware-converter on 172.20.2.10

    Could not open service handle to with 983103:1060 level access

    Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

    Failed to start the vmware converter service

    Connection to
    172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

    Unable to connect to
    172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

    From vmware-converter on 172.20.2.10

    Could not open service handle to with 983103:1060 level access

    Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

    Failed to start the vmware converter service

    Give up trying to connect to
    172.20.2.10\pipe\vmware-converter-VMDB

    Task failed: P2VError UFA_NOT_RUNNING()

    Installation UFAD hostname = 172.20.2.10, user name is domain\user, postponeReboot = 1

    Start of the execution of a task

    Connect to ADMIN$ on 172.20.2.10 as domain\user1

    Successfully connected to ADMIN$ on 172.20.2.10

    MakeSafeDirectory: directory exists, skip the security lock

    MakeSafeDirectory: directory exists, skip the security lock

    MakeSafeDirectory: directory exists, skip the security lock

    ہ service args: com.vmware.courier - vntixenubmcaveth

    Could not open service handle to with 983551:1060 level access

    Execution completed the task

    Start of the execution of a task

    Connection to IPC$ on 172.20.2.10 as domain\user1

    Successfully connected to IPC$ on 172.20.2.10

    Connection to
    172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

    Connected to the
    172.20.2.10\pipe\vmware-converter-VMDB

    Unknown path: /vmomi/

    Impossible task without error message

    VMware converter - agent.log:

    Journal for the VMware Converter Enterprise, pid = 1396, Agent version = 4.1.1 build = build-206170, option = release, section = 2

    Cannot create the writer console

    Current working directory: C:\Program VMware Converter Enterprise Agent

    HOSTINFO: See Intel CPU, numCoresPerCPU 1, numThreadsPerCore 1.

    HOSTINFO: This machine has 1 UC physical and carrots 1 1 logical processors total.

    TaskMax = 40, IoMin = 1, IoMax = 81

    Try ufa_agent

    Plugin path 0: ufa - agent.dll

    Absolute path of the plugin 0: C:\Program VMware Converter Enterprise Agent\ufa - agent.dll

    Initializing the SSL context

    Using the libcrypto, version 9070CF

    Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

    Plugin initialized

    Try ufa_client

    Plugin path 1: ufa - client.dll

    Absolute path of the plugin 1: C:\Program VMware Converter Enterprise Agent\ufa - client.dll

    UfaClientPlugin Init

    Try ufa_slave

    Plugin path 2: ufa - slave.dll

    Absolute path of the plugin 2: C:\Program VMware Converter Enterprise Agent\ufa - slave.dll

    Microsoft Windows Server 2003,

    Standard Edition

    Service Pack 1 (Build 3790)

    UfaSlavePlugin Init

    Try ufa_sysMigration

    Plugin 3 path: ufa - sysmigration.dll

    Absolute path of the plugin 3: C:\Program VMware Converter Enterprise Agent\ufa - sysmigration.dll

    NFC connection accept timeout: 180000 milliseconds

    NFC request timeout: 180000 milliseconds

    NFC read timeout: 60000 milliseconds

    NFC write timeout: 600 000 milliseconds

    NFC connection accept timeout: 180000 milliseconds

    NFC request timeout: 180000 milliseconds

    NFC read timeout: 60000 milliseconds

    NFC write timeout: 600 000 milliseconds

    SysMigrationPlugin Init

    Try ufa_sysReconfig

    Plugin path 4: ufa - sysreconfig.dll

    Absolute path of the plugin 4: C:\Program VMware Converter Enterprise Agent\ufa - sysreconfig.dll

    SysReconfigPlugin Init

    The data store of reconfiguration of loading XML from C:\Program VMware Converter Enterprise Agent\reconfigurationDataStore.dat...

    ReconfigurationDataStore of filling...

    Action free of charge

    CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_1000 & dev_0030 patch: C_SYMMPI

    CurrentControlSetKey update of the register: Services\symmpi patch: S_SYMMPI

    Update the filePathInWinDir file: system32\drivers\symmpi.sys source: BASEOS sourceFileName: symmpi.sys

    Action BuslogicMylex of loading

    CurrentControlSetKey update of the register: enum\root\LEGACY_BUSLOGIC patch: L_BUSLOGIC

    CurrentControlSetKey update of the register: services\buslogic patch: S_BUSLOGIC

    Update the filePathInWinDir file: system32\drivers\buslogic.sys source: VMWARE_DRIVERS_CAB sourceFileName: buslogic_for_nt.sys

    Action Buslogic_vmscsi of loading

    CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_104b & dev_1040 patch: C_VMSCSI

    CurrentControlSetKey update of the register: Control\Class\ {4D36E97B-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_VMSCSI

    CurrentControlSetKey update of the register: Services\vmscsi patch: S_VMSCSI

    Update the filePathInWinDir file: system32\drivers\vmscsi.sys source: VMWARE_DRIVERS_CAB sourceFileName: vmscsi.sys

    Action Buslogic_vmscsi_ACPI of loading

    Update the registry CurrentControlSetKey: Enum\PCI\VEN_104B & DEV_1040 & SUBSYS_1040104B & REV_01\3 & 61aaa01 & 0 & 80 patch: E_VMSCSI

    Action Buslogic_vmscsi_NotACPI of loading

    Update the registry CurrentControlSetKey: Enum\PCI\VEN_104B & DEV_1040 & SUBSYS_1040104B & REV_01\2 & ebb567f & 0 & 80 patch: E_VMSCSI

    Action Enable_Lsi_Scsi_Driver of loading

    CurrentControlSetKey update of the register: Services\LSI_SCSI patch: S_LSI_SCSI

    Action Mouse_Keyboard_Common of loading

    Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0303 patch: C_PS2KBD

    CurrentControlSetKey update of the register: Control\Class\ {4D36E96B-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_PS2KBD

    Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0f13 patch: C_PS2MOUSE

    Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0f03 patch: C_PS2MOUSE

    CurrentControlSetKey update of the register: Control\Class\ {4D36E96F-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_PS2MOUSE

    Action Mouse_Keyboard_ISAPnP of loading

    CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_8086 & dev_7110 & cc_0601 patch: C_ISAPNP

    Action Mouse_Keyboard_ACPI of loading

    CurrentControlSetKey update of the register: Enum\ACPI\PNP0303 patch: E_PS2KBD

    CurrentControlSetKey update of the register: Enum\ACPI\PNP0F13 patch: E_PS2MOUSE

    CurrentControlSetKey update of the register: Enum\ACPI\PNP0F03 patch: E_PS2MOUSE

    Action Mouse_Keyboard_ACPI_Vista of loading

    CurrentControlSetKey update of the register: Enum\ACPI\PNP0F13 patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Enum\ACPI\PNP0F03 patch: SKUNKWORKS_FILLER

    Action Mouse_Keyboard_NotACPI of loading

    Update the registry currentControlSetKey: Enum\Root\ * PNP0F13 patch: SKUNKWORKS_FILLER

    Update the registry currentControlSetKey: Enum\Root\ * PNP0F03 patch: SKUNKWORKS_FILLER

    Action NT_SVGA_Registry_Updates of loading

    CurrentControlSetKey update of the register: enum\root\LEGACY_VMX_SVGA patch: E_VMX_SVGA

    CurrentControlSetKey update of the register: services\vmx_svga patch: S_VMX_SVGA

    Action Common_SVGA_Updates of loading

    CurrentControlSetKey update of the register: services\vmx_svga patch: S_VMX_SVGA

    CurrentControlSetKey update of the register: Control\Class\ {4D36E968-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_VMX_SVGA

    Update the filePathInWinDir file: INF\vmx_svga.inf source: VMWARE_DRIVERS_CAB sourceFileName: vmx_svga.inf

    Update the filePathInWinDir file: system32\vmx_fb.dll source: VMWARE_DRIVERS_CAB sourceFileName: vmx_fb.dll

    Update the filePathInWinDir file: system32\vmx_mode.dll source: VMWARE_DRIVERS_CAB sourceFileName: vmx_mode.dll

    Update the filePathInWinDir file: system32\drivers\vmx_svga.sys source: VMWARE_DRIVERS_CAB sourceFileName: vmx_svga.sys

    Action SVGA_Registry_Updates_APCI of loading

    Update the registry CurrentControlSetKey: Enum\PCI\VEN_15AD & DEV_0405 & SUBSYS_040515AD & REV_00\3 & 61aaa01 & 0 & 78 patch: E_VMX_SVGA

    Action SVGA_Registry_Updates_NotACPI of loading

    Update the registry CurrentControlSetKey: Enum\PCI\VEN_15AD & DEV_0405 & SUBSYS_040515AD & REV_00\2 & ebb567f & 0 & 78 patch: E_VMX_SVGA

    Action Restore_i8042_NT5 of loading

    CurrentControlSetKey update of the register: Services\i8042prt patch: SKUNKWORKS_S_I8042

    Update the filePathInWinDir file: system32\drivers\i8042prt.sys source: BASEOS sourceFileName: i8042prt.sys

    Action Deref_vpcsrvc of loading

    CurrentControlSetKey update of the register: Services\1-driver-vpcsrvc patch: SKUNKWORKS_FILLER

    Update the registry CurrentControlSetKey: Services\1-vpcsrvc patch: SKUNKWORKS_FILLER

    Update the registry currentControlSetKey: Enum\LEGACY_1-DRIVER-VPCSRVC patch: SKUNKWORKS_FILLER

    Update the registry currentControlSetKey: patch Enum\LEGACY_1-VPCSRVC: SKUNKWORKS_FILLER

    Action Deref_mrxvpc of loading

    CurrentControlSetKey update of the register: Services\MrxVPC patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Enum\Root\LEGACY_MRXVPC patch: SKUNKWORKS_FILLER

    Action Deref_vpcmap of loading

    CurrentControlSetKey update of the register: Services\VPCMap patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Enum\Root\LEGACY_VPCMAP patch: SKUNKWORKS_FILLER

    Deref_vpc-s3_NT4 of loading action

    CurrentControlSetKey update of the register: Services\vpc-s3 patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Enum\Root\LEGACY_VPC-S3 patch: SKUNKWORKS_FILLER

    Deref_vpc-s3_NT5 of loading action

    CurrentControlSetKey update of the register: Services\vpc-s3 patch: SKUNKWORKS_FILLER

    Update the registry CurrentControlSetKey: Enum\PCI\VEN_5333 & DEV_8811 & SUBSYS_00000000 & REV_00\3 & 267a616a & 0 & 40 patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Services\s3legacy patch: SKUNKWORKS_FILLER

    Action Deref_vmsrvc of loading

    CurrentControlSetKey update of the register: Services\1-driver-vmsrvc patch: SKUNKWORKS_FILLER

    Update the registry currentControlSetKey: Enum\Root\LEGACY_1-DRIVER-VMSRVC patch: SKUNKWORKS_FILLER

    Update the registry CurrentControlSetKey: Services\1-vmsrvc patch: SKUNKWORKS_FILLER

    Update the registry currentControlSetKey: patch Enum\Root\LEGACY_1-VMSRVC: SKUNKWORKS_FILLER

    Action Deref_netfin of loading

    CurrentControlSetKey update of the register: Enum\Root\LEGACY_NETFIN patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Services\NetFin patch: SKUNKWORKS_FILLER

    Action Deref_cpqdmi of loading

    CurrentControlSetKey update of the register: Enum\Root\LEGACY_CPQDMI patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Services\CPQDMI patch: SKUNKWORKS_FILLER

    Action Deref_cpqalert of loading

    CurrentControlSetKey update of the register: Enum\Root\LEGACY_CPQALERT patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Services\CPQALERT patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Services\EventLog\System\CPQALERT patch: SKUNKWORKS_FILLER

    Action Deref_cpqagent of loading

    CurrentControlSetKey update of the register: Services\EventLog\System\Snmp patch: SKUNKWORKS_FILLER

    CurrentControlSetKey update of the register: Services\Snmp patch: SKUNKWORKS_FILLER

    Action Deref_ipmi of loading

    CurrentControlSetKey update of the register: Services\IPMI patch: SKUNKWORKS_FILLER

    Action RemoveUnwantedKeys of loading

    CurrentControlSetKey update of the register: Services\VPCMap patch: SKUNKWORKS_FILLER

    Action FixSetupLog of loading

    String replace updated filePathInWinDir: repair\setup.log model:
    System32
    value of ntoskrnl.exe.*\.exe:
    System32
    Ntoskrnl.exe = "ntoskrnl.exe".

    String replace updated filePathInWinDir: repair\setup.log model:
    System32
    value of Hal.dll.*\.dll:
    System32
    HAL.dll = "hal.dll".

    Action DeleteInfCacheFile of loading

    FilePathInWinDir delete the file: inf\INFCACHE.1

    Definition of loading GenericWin2k364Bit

    Definition of loading GenericVista64Bit

    Definition of loading GenericWinXP64Bit

    Definition of loading GenericWin64Bit

    Definition of loading NotWin64Bit

    Definition of loading GenericVista

    Definition of loading GenericWinNT5

    Definition of loading GenericWin2k3

    Definition of loading GenericWinXP

    Definition of loading GenericWin2k

    Definition of loading GenericWinNT4

    Definition of loading NotWinNT4

    Definition of loading NotWinVista

    Loading ACPI expression definition

    Definition of loading NotACPI

    Loading definition expression MultiProc

    Definition of loading InstallSVGA

    Definition of loading MustUpdateCoreNTFiles

    Definition of loading BuslogicMylex

    Definition of loading Buslogic_vmscsi

    Loading reconfiguration FixSetupLog

    Action FixSetupLog for reconfiguration of loading

    Loading reconfiguration BuslogicMylex

    Action BuslogicMylex for reconfiguration of loading

    Loading free reconfiguration

    Reconfiguration of loading free action

    Loading reconfiguration Buslogic_vmscsi_ACPI

    Action Buslogic_vmscsi for reconfiguration of loading

    Action Buslogic_vmscsi_ACPI for reconfiguration of loading

    Loading reconfiguration Buslogic_vmscsi_NotACPI

    Action Buslogic_vmscsi for reconfiguration of loading

    Action Buslogic_vmscsi_NotACPI for reconfiguration of loading

    Loading reconfiguration Enable_Lsi_Scsi_Driver

    Action Enable_Lsi_Scsi_Driver for reconfiguration of loading

    Loading reconfiguration Mouse_Keyboard_ACPI

    Action Mouse_Keyboard_Common for reconfiguration of loading

    Action Mouse_Keyboard_ISAPnP for reconfiguration of loading

    Action Mouse_Keyboard_ACPI for reconfiguration of loading

    Loading reconfiguration Mouse_Keyboard_NotACPI

    Action Mouse_Keyboard_Common for reconfiguration of loading

    Action Mouse_Keyboard_ISAPnP for reconfiguration of loading

    Action Mouse_Keyboard_NotACPI for reconfiguration of loading

    Loading reconfiguration Mouse_Keyboard_ACPI_Vista

    Action Mouse_Keyboard_Common for reconfiguration of loading

    Action Mouse_Keyboard_ACPI_Vista for reconfiguration of loading

    Loading reconfiguration SVGA_NT

    Action Common_SVGA_Updates for reconfiguration of loading

    Action NT_SVGA_Registry_Updates for reconfiguration of loading

    Loading reconfiguration SVGA_notNT_ACPI

    Action Common_SVGA_Updates for reconfiguration of loading

    Action SVGA_Registry_Updates_APCI for reconfiguration of loading

    Loading reconfiguration SVGA_notNT_NotACPI

    Action Common_SVGA_Updates for reconfiguration of loading

    Action SVGA_Registry_Updates_NotACPI for reconfiguration of loading

    Loading reconfiguration Restore_i8042_NT5

    Action Restore_i8042_NT5 for reconfiguration of loading

    Loading reconfiguration Deref_vpcsrvc

    Action Deref_vpcsrvc for reconfiguration of loading

    Loading reconfiguration Deref_mrxvpc

    Action Deref_mrxvpc for reconfiguration of loading

    Loading reconfiguration Deref_vpcmap

    Action Deref_vpcmap for reconfiguration of loading

    Loading reconfiguration Deref_vpc-s3_NT4

    Deref_vpc-s3_NT4 for reconfiguration of loading action

    Loading reconfiguration Deref_vpc-s3_NT5

    Deref_vpc-s3_NT5 for reconfiguration of loading action

    Loading reconfiguration Deref_vmsrvc

    Action Deref_vmsrvc for reconfiguration of loading

    Loading reconfiguration Deref_netfin

    Action Deref_netfin for reconfiguration of loading

    Loading reconfiguration Deref_cpqdmi

    Action Deref_cpqdmi for reconfiguration of loading

    Loading reconfiguration Deref_cpqalert

    Action Deref_cpqalert for reconfiguration of loading

    Loading reconfiguration Deref_cpqagent

    Action Deref_cpqagent for reconfiguration of loading

    Loading reconfiguration Deref_ipmi

    Action Deref_ipmi for reconfiguration of loading

    Loading reconfiguration RemoveUnwantedKeys

    Action RemoveUnwantedKeys for reconfiguration of loading

    Loading reconfiguration Delete_InfCacheFile

    Action DeleteInfCacheFile for reconfiguration of loading

    Load patches for WINDOWS4.0

    Load patches for WINDOWS4.0

    Load patches for WINDOWS4.0

    Load patches for WINDOWS4.0

    Try ufa_vmImporter

    Plugin path 5: ufa - vmimporter.dll

    Absolute path of the plugin 5: C:\Program VMware Converter Enterprise Agent\ufa - vmimporter.dll

    VMImporterPlugin Init

    VMDB channel name:
    .\pipe\vmware-converter-VMDB, use the SSL protocol: true

    New format for serialization of VMDB VMOMI

    Plugin has started

    UfaClientPlugin Start

    UfaSlavePlugin Start

    SysMigrationPlugin Start

    SysReconfigPlugin Start

    VMImporterPlugin Start

    vmware converter service started

    IVmdbPipe2Impl operation completed with error: the pipe is closed.

    Thanks in advance for any help provided!

    Cannot find anything on your error. It is sometimes better to install standalone converter locally on the server that you are trying to convert. Then run the converter locally on your virtual infrastructure.

    Best wishes / Saludos

    Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

    Please, do not forget the points of call of the "useful" or "correct" answers

    ________________________________________

    Nicolas Solop

    VMware vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

    My Linkedin profile

    Join the Virtualizacion en Español group in LinkedIn

    ! http://feeds.feedburner.com/WetcomGroup.1.gif!

  • How to remove a loaded image on the stage of a symbol containing a button?

    1st configuration:

    1. General map is loaded

    Texas1.png

    2. on a click event, a larger image of the region is loaded with the following code (thanks Joel demo). Mouse is displayed the name of the County and then the click on a popup (symbol) shows some info.

    $(' < img id = "Région1" width = "310" height = "475" src="images/region1.png" usemap = "#region1" > '+' < nom de la carte = "Région1" > "+...)

    ' < area id = "Dallam" shape = "rect" title = "Dallam" coords = "29,17,97,58" / > "+...

    texas2.pngtexas3.png

    3. in the symbol of the pop-up window, I want to expand the plan to be delete on the click event of the button: 'display another region '. I have the following code that does not work (the image is not deleted) resulting in what you see below:

    sym.playReverse ();

    sym.getComposition () .getStage () .stop (0);

    sym.getComposition () .getStage ().getElementById("region1").remove ();

    texas4.png

    So my question is how can I delete the image (image large region in purple here loaded as described in 2.)?

    I got it. It should be:

    $("#region1").remove ();

    # was missing.

    In fact, I added that to the time 0 on the main timeline, so when I got there he deletes the image.

    It doesn't have the side still, but I guess I should get finally it works from there, instead.

    Thanks for your time.

  • Barcode 2D Barcode-Mail

    can someone tell me how to use the barcode 2D and documaker 11.4 mail bar code - the requirement is that some of the data in the XML of the extract must be encoded using bar code 2D and mail barcode.where I can give input in these bar code so that it can be encoded

    user13484277 wrote:
    can someone tell me how to use the barcode 2D and documaker 11.4 mail bar code - the requirement is that some of the data in the XML of the extract must be encoded using bar code 2D and mail barcode.where I can give input in these bar code so that it can be encoded

    Hello

    You'll definitely want to take a look at the documentation of 11.4. Open your help file DMStudio (pressing F1 in Studio, or by opening the DMStudio.CHM file in the Studio installation directory). Click the Index tab in the viewer help and type in "barcode". You will have access to information on the barcode support.

    In general, map you a barcode field just as you would any other field. There are settings available in the dialog box that allow you to specify some elements associated with the barcode - for example, to select the type of encoding to use with your bar code. You can also take a look at the DC_BOOK.pdf, which belongs to the 11.4 documentation library located here (http://download.oracle.com/docs/cd/E14902_01/e14902_01_index.html) Note that documentation mentions 'Docucreate' which is a legacy tool, but the same applies to Studio barcodes as well. See Chapter 6 use of objects, section 'Inserting A barcode' at page 191. There are specific for bar codes for mail on page 194, under the heading 'generating the USPS Intelligent Mail Barcode.

    Edit:
    I was able to download and install the version 11.4 to check.
    (1) open Documaker Studio and open your workspace.
    (2) open your resource section, insert a new variable field.
    (3) select the type of barcode field.
    (4) select the Data Matrix (2d) or Intelligent Mail barcode format.
    (5) for map data in a checked out file, use the section of the rule, and then select the appropriate rule (e.g. XDD use a value mapped in your XDD or MOVE_IT and a good extracted from mapping file or XPATH).

    Best,
    Andy

    Published by: Andy little February 15, 2011 16:47

  • Four questions: Intros, Rendering, securities...

    I'm almost finished my movie and help here has been great. Thanks to the hunt and Steve Grisetti.

    1) advice on the conduct of a nice intro into elements? I use the font Impact on ambient music, there is a combination of still photos and images. It's a documentary about social change. A bit of a matter wave, but advice appreciated, this is my first film. I want something simple and classic...

    (2) what is the best format for rendering for youtube, google video and other online video sites? I want the best possible quality.

    (3) I have make the movie into pieces of 2 minutes to save on processing power. Can I go into 7-8 pieces and connect them after? How?

    (4) how to slow a crawling/rolling title. (Elements 3.0) I looked around and saw no speed adjustment.

    * The film will be finished in a few weeks and is free online. I should get around 100,000 views with contacts I have. If anyone here is interested I can put a link to the top, but if it's against your C + T not s then no problem.

    Thanks in advance.

    Peace

    Let's see if I can offer a few suggestions:

    (1) advice on the conduct of a nice intro into elements? I use the font Impact on ambient music, there is a combination of still photos and images. It's a documentary about social change. A little something vague, but advice appreciated, this is my first film. I want something simple and classic...

    Impact is expected to be a good policy. I use Arial Bold or Arial Black a lot. We want to comminute, if possible, and a good thickness sans serif looks good on video. Serif fonts, while nice in high-resolution print, reflections and begins to break up on the video, even if it is progressive.

    I would like to animate my titles, unless it's a copy of body block, where the details of reading is the most important part. I put the period to where I can read the full text of 1.5 times. For my movie, I often Keyframe various aspects and effects. The opacity is one of the first I will use and maybe even a bit of Gaussian blur. With keyframes, I have complete control. With subtitles, I often Keyframe the Motion fixed effect > Position to slide in and then keyframe in the opacity to "bland that one," while the other slips in to another part of the frame. For me, these are usually only 1-2 words or a short sentence at most. I keep the animation down to a few, without Rotations, or towers. I want the public to read the title and not notice the "nice stuff" that I did for her. That is why just a little movement on the screen, and so maybe a slow fade (opacity), with a touch blur closely the work of the end for me.

    If I'm interspersing text body copy block titles, I just use Cross-dissolves or Dip - to-black.

    (2) what is the best format for rendering for youtube, google video and other online video sites? I want the best possible quality.

    Is it an HD project? For YouTube, many recommend the H.264 CODEC, although some do not like the format/CODEC WMV HD. YouTube changes what they often require. I would check the specifications later. Note that each provider may have different specifications, you need to maybe do a survey of all of your goals and see if there are similarities between them. Maybe it's the best way to go, so you don't have to different formats to export/Share. There is a YouTube FAQ entry, and it should be a good starting point. Also, YouTube and perhaps many others, is re - encode your quote, so there is not a lot we can do to ensure quality - will change by the provider.

    (3) I have make the movie into pieces of 2 minutes to save on processing power. Can I go into 7-8 pieces and connect them after? How?

    Yes. What file format/CODEC you use will depend on your project. For sustainable development projects, I recommend that the share of exports to DV - AVI Type II w / 16-bit 48 kHz PCM/WAV Audio, then import them those. There is another CODEC, such as Lagarith Lossless, that I use for the transfer, intermediaries of files. I don't know how it works with HD material. For HD, others will have to offer suggestions, I only do sustainable development projects.

    In general, all share/export to the selected format/CODEC and then import that into a new, 'master' project. Assemble, add titles, etc. and then export/final production sharing.

    (4) how to slow a crawling/rolling title. (Elements 3.0) I looked around and saw no speed adjustment.

    Is going back to the #1 question. For all of my animations, I use keyframes. In the case of a roll or an analysis, I Keyframe the fixed effect > Motion > Position over time. With keyframes, I have ultimate control and can roll up to a point, hold and then unroll. Even with a crawl - bring, hold him, take him away. You can even adjust the speed of say a roll so that it penetrates slowly, holds, and then disappears more quickly. Keyframing takes a bit of time, but pays dividends with complete control.

    Regarding the link - please post here when you're done. Only downside would be to post a link to something like YouTube or Vimeo, and not just any which content provider, which requires a subscription, or you sign up. Also, check out the site Muvipix . There is a nice gallery section.

    Good luck and we hope this helps,

    Hunt

  • Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

    I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

    Hello

    Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

    If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

    Just in case you need to reconfigure your network.

    ---------------

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share     = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

    Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    -----------------------

    Jack MVP-networking. EZLAN.NET

  • share a map

    I use el capitan.  In the maps app, I would like to share a map.  After having drawn a map of the United States, I click the button share.  However, the only options for me to share are my iPhone or iPad.  I can't share any application such as Notes.  Any ideas?

    Open system preferences > Extensions. Check the items you want to display in the action Menus.

Maybe you are looking for

  • where to purchase a Quicktime 7 Pro registration key?

    I'll try to find where to go to purchase a quicktime 7 Pro registration key and cannot find where.  Apple store?

  • How can I change the regional settings of DVD?

    I changed my regional settings more than the necessary time and they cannot be changed more then l can not look at some of the l have.how dvd can difficulty be multi regional dvd player?

  • the program window disappears or monitor will fly to the left

    The program is open and running, but I can not access the operations window.  If I had a screen running to the left of my main screen, where the program would be.  I know there is a simple solution, but I can't remember it.

  • Blue ray dvd

    After the upgrade to Windows 7 64 bit cannot play blue ray using Cyberlink power dvd disk. \Able to play 32-bit.Can play blue ray disk in Media center?Will be supported 64-bit Windows 7 Cyberlink power dvd and blue ray disc?The LG player...

  • Download Package created on computer with an Admin account or "root".

    HelloEarlier today a support rep instructed me to create an account admin or 'root' (as opposed to my usual personal account on my computer) in order to download package adobe creative cloud Manager. After hours of waiting, the download version is no