No luck for the size of the partition, will automatically up to 32 GB

In addition to the title info, as soon as I clicked on the key USB to use the Boot Camp drivers goes to the next screen and automatically launch the partitioning. I can see where is the option to resize, but have no chance to adjust. I tried with the USB in and out of the computer.

Downloaded Mac mid 2011, 64-bit version of Windows 7 as iso and recorded on a dvd if it's any help.

The amount of free contiguous disk space will limit your partitioning limits. You can run disk utility and run first aid or boot without failure - try safe mode if your Mac does not commissioning - Apple support - and start normally and try BCA.

Tags: Windows Software

Similar Questions

Not enough space on disk for the Partition: Windows Bootcamp

iMac (retina 4K, 21.5 inches, end of 2015)

Processor: Intel Core i5 to 3.1 GHz

Memory: 6 GB 1867 MHz DDR3

Graphics card: Intel Pro Iris Graphics 6200 1536 MB

The OSX Version: 10.11.4

I tried to download windows for my iMac. I bought the full version via USB for it. I followed these instructions: create an ISO image for Windows - Apple Support installation media Boot Camp to create my own ISO image. I did, and I ejected from disk image Windows "10" as he told me too.

When I go to download the support software and partition it, he will get after downloading the Windows Support software, then to halfway in partition the drive, it will say "disk does not of enough space to be partitioned. (PS) The "BOOTCAMP" image will appear on the desktop until it says the message and then will disappear and the message will occur.

I fixed the disc and it defragmented. It's a lot I put 300 concerts for the Partition. I don't know what is happening.

I've also entered the recovery disc and repaired this way.

I'm on the forums before I decided to call Apple.

Thank you.

You have a Fusion drive?

short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

More space for the partition windows 10

I tried to use bootcamp and partition my computer to be mainly bone and part windows, but when I restarted my computer it will automatically boot windows. I guess so worst cases and that the bones disappeared and I wanted to increase the size for windows. I don't know how to do this with any access to the operating system.

If you hold down the option key pressed at the start to the top or alt gr if you are using a windows keyboard give you a boot menu where you can choose which operating system you want to start in

Query for the partitions of the interval, system and reference

Hi, I want to ask some of range partitions, system and reference information.

In the partition of the interval, the script looks like this

CREATE TABLE interval_sales

(prod_id NUMBER (6))

cust_id NUMBER

time_id DATE

)

PARTITION OF RANGE (time_id)

INTERVAL (NUMTOYMINTERVAL (1, 'MONTH'))

(PARTITION p0 VALUES LESS THAN (TO_DATE (' 01/01/2005 ',' DD-MM-YYYY "")));

I would like to write a query to find the expression of the interval "MONTHS" but could not find what he makes.

In the reference partition, the script looks like this

CREATE TABLE child_tab)

ID NUMBER NOT NULL,

parent_tab_id NUMBER NOT NULL,

code VARCHAR2 (10),

Description VARCHAR2 (50).

CREATED_DATE DATE,

CONSTRAINT child_tab_pk PRIMARY KEY (id),

CONSTRAINT child_parent_tab_fk FOREIGN KEY (parent_tab_id)

REFERENCES parent_tab (id)

)

PARTITION BY REFERENCE (child_parent_tab_fk);

I want to write a query to find the foreign key name 'child_parent_tab_fk' after the PARTITION BY REFERENCE to the last line, but have no luck so far.

In the end, I want to achieve this goal:

If (interval_partitioning_type)

Assign the interval expression to a string variable

Another yew (reference_partitioning_type)

Set the foreign key to a variable of type of foreign key

Is there a way to get the type of partitioning? (interval and reference here)

Please advise,

Jack

You can query ALL_PART_TABLES

`REF_PTN_CONSTRAINT_NAME`	`VARCHAR2(30)`		Name of the referential partitioning constraint for partitioned tables reference
`INTERVAL`	`VARCHAR2(1000)`		The value of the interval chain

Look for the partition for the fact table
Oracle version: Oracle 10.2

I have a table of facts with daily partitions.
I'm insertion of test data in this table for the old date 20100101.

I am able to insert that record into this table as below
insert into fact_table values (20100101,123,456);

However I noticed that the partition for this date does not exist in the table (all_tab_partitions) more I'm not able to select the data using

Select * from facT_table partition (d_20100101)

but I am able to extract the data using

Select * from facT_table where date_id = 20100101

could you get it some please let me know how to find the partition in which these data could be inserted
and if the partition date 20100101 is not present so why put so that the date doesn't work?
user507531 wrote:
However I noticed that the partition for this date does not exist in the table (all_tab_partitions) more I'm not able to select the data using

Select * from facT_table partition (d_20100101)

Wrong approach.

but I am able to extract the data using

Select * from facT_table where date_id = 20100101

Correct approach.

could you get it some please let me know how to find the partition in which these data could be inserted
and if the partition date 20100101 is not present so why put so that the date doesn't work?

Who says that the date is invalid. ? It is a partition of the range - which means that each partition covers a range. And if you bothered to read in the SQL Reference Guide on how the definition of a partition of the range, you will notice that each partition is defined with the value end of the range it covers. There is no starting value - as the end of the previous partition is the "+ border +" between this and the previous partition.

I suggest that before you use a database feature first become familiar you with it. Another evil to use and making assumptions wrong about it, more than likely outcomes.

Statisctis for the partition table
I want to collect statistics for a partition of the table (say part1) instead of gathering statistics for the entire partition table. Is this possible and if yes how can I do this.
Experts entered are highly appreciated.
DB version: 9.2.0.6
Thank you all...
Yes it is possible using the partname parameter:

exec dbms_stats.gather_table_stats (-online 'owner' ownname, tabname => partname-online 'partname', 'table');

TouchSmart 600: Low battery for the keyboard will not disappear

After upgrade to windows 10 in PC all-in-one TouchSmart 600; whenever the PC wakes up from sleep mode, low battery for the keyboard warning message appears despite the fact that the batteries are new. The message 'form' has no way of closing other that "remind me later".

Solution: new keyboard, Logitech > bought. Must say that I was so tired of the current fake e-mail I just replaced my HP keyboard and mouse with another third-party. Thanks for all those who have responded or tried to help.

See APEX SQL for the treatment of automatic line
Hello

I get an error like this when you try to update with the automatic processing of line:
ORA-20505: DML error: p_rowid = 89, p_alt_rowid = network_user_mou_id, p_rowid2 =, p_alt_rowid2 is. ORA-06550: line 1, column 17: PL/SQL: ORA-00936: lack of expression ORA-06550: line 1, column 9: PL/SQL: statement ignored
Is there a way to see the generated SQL code so that I could determine what the problem is?

Thank you
Rick
Rick:

A way to see the SQL code executed would be to allow "sql_trace" before the process of automatic processing of line. Create a process that fires off the coast before before that the process of automatic line with the following line of code
```
alter session set sql_trace=true;
```
and a process that fires off the coast after the process of automatic line to disable tracing
```
alter session set sql_trace=false;
```
Trace files will occur in the "bdump" or "udump" Directory depending on whether you are using the EPG or OSH.

As for the error itself, I wonder if it is due to a column that you recently added to the form.

CITY

HP Envy 15 notebook PC: Reinstall operating system - will the applications present in the new will automatically return

Dear experts!

I bought a new HP envy 15 computer laptop 15-k214nx and it came with Win 8.1 pre-installed with some other applications like experience getforce, beats audio etc. I want to install Win 7 (because I like it) or reinstall win 8.1 to set parameters according to my choice.

I wanted to know if apps like audio beats, cyberlink youcam, nvidia getforce experience etc that are preinstalled in the urge again, this return after that I reinstalled the operating system or any of these applications will by default return because they are present at this moment and I will have to look for these apps from somewhere to install myself.

Thanks in advance

Hello

Recovery media, I am referring to disks (or flash drive) that you create yourself using the Recovery Media Creator application on your laptop - you can create it once, so I would definitely recommend to do. A guide on the creation of this support can be found on the following link.

http://support.HP.com/us-en/product/HP-envy-X2-11/5296226/model/5336701/document/c03481733

This support will reinstall the operating system, all the drivers, all the original software (including applications on the start menu). They will also recreate all the original scores. A guide on the main ways to perform a factory reset using a recovery or support of the partition recovery (including a video preview) can be found on the link below.

http://support.HP.com/us-en/document/c03489643

Kind regards

DP - K

Need help for the Partition of PL/SQL query for a question

Hi all

I'm running on a question that I'm not able to get the desired result. I would appreciate if one of you experts can help resolve this.
SQL * more: Production of release 11.2.0.1.0 game 4 Feb 09:31:26 2016
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options

with t as)
Select 1 numero_enregistrement, Student_ID 123, nvl (trim (01), 'NULL') like Item_id, 'ITEM_ID_01' FIELD_NAME Union double all the
Select 1 numero_enregistrement, Student_ID 123, nvl (trim(' '), 'NULL') like Item_id, 'ITEM_ID_02' FIELD_NAME Union double all the
Select 1 numero_enregistrement, Student_ID 123, nvl (trim(' '), 'NULL') like Item_id, 'ITEM_ID_03' FIELD_NAME Union double all the
Select 1 numero_enregistrement, Student_ID 123, nvl (trim(' '), 'NULL') like Item_id, 'ITEM_ID_04' FIELD_NAME Union double all the
Select 1 numero_enregistrement, Student_ID 123, nvl (trim(' '), 'NULL') like Item_id, 'ITEM_ID_05' FIELD_NAME Union double all the
Select 1 numero_enregistrement, Student_ID 123, nvl (trim(' '), 'NULL') like Item_id, 'ITEM_ID_06' FIELD_NAME Union double all the
Select 2 numero_enregistrement, Student_ID 123, nvl (trim('01'), 'NULL') like Item_id, 'ITEM_ID_01' FIELD_NAME Union double all the
Select 2 numero_enregistrement, Student_ID 123, nvl (trim('02'), 'NULL') like Item_id, 'ITEM_ID_02' FIELD_NAME Union double all the
Select 2 numero_enregistrement, Student_ID 123, nvl (trim('03'), 'NULL') like Item_id, 'ITEM_ID_03' FIELD_NAME Union double all the
Select 2 numero_enregistrement, Student_ID 123, nvl (trim('01'), 'NULL') like Item_id, 'ITEM_ID_04' FIELD_NAME Union double all the
Select 2 numero_enregistrement, Student_ID 123, nvl (trim('01'), 'NULL') like Item_id, 'ITEM_ID_05' FIELD_NAME Union double all the
Select 2 numero_enregistrement, Student_ID 123, nvl (trim('02'), 'NULL') like Item_id, 'ITEM_ID_06' double FIELD_NAME)
SELECT distinct COUNT (*) OVER (PARTITION BY numero_enregistrement ORDER BY numero_enregistrement) REC_COUNT, numero_enregistrement, STUDENT_ID, ITEM_ID, Field_Name FROM t
where ITEM_ID = 'NULL '.
I get the following result.

NUMERO_ENREGISTREMENT ITEM_ID FIELD_NAME STUDENT_ID REC_COUNT
5                                   1                                             123                              NULL               ITEM_ID_02
5                                   1                                             123                              NULL               ITEM_ID_03
5                                   1                                             123                              NULL               ITEM_ID_04
5                                   1                                             123                              NULL               ITEM_ID_05
5                                   1                                             123                              NULL               ITEM_ID_06

My desired output is
Rec_COUNT Student_ID ITEM_ID FIELD_NAME numero_enregistrement
5 1 123 NULL ITEM_ID_02, ITEM_ID_03, ITEM_ID_04, ITEM_ID_04, ITEM_ID_05
Thanks in advance
Rajesh

Hi, Renon,

Thanks for posting the sample data and results; It is very useful.

Be sure to explain exactly how you get these results from these data. There are many different reasons you may have, that all happen to produce the same results with the sample data you posted, but will get different results with other data sets.

This looks like a job for aggregate (including the LISTAGG) functions and GROUP BY, not for functions, analytical and PARTITION BY

A piece of procedure for the partition!

Hi gurus,
We have a PLSQL package that we use to create partitions. Same code works in a database so that not in another. This is only part of the code that compiles all invalid objects in the database. I am not able to understand why it fails in the TEST database and works perfectly in database production. Please help with your comments. Thanks in advance.
CODE
-----------------
CREATE OR REPLACE PACKAGE 'SYSTEM '. "" PTAPI ".
as
procedure p (p_text varchar2);
procedure to recompile;
end ptapi;
CREATE OR REPLACE PACKAGE BODY 'SYSTEM '. "" PTAPI ".
as
g_part_date_format varchar2 (1000): = 'YYYYMMDD ';
procedure p (p_text varchar2)
as
Start
dbms_output.put_line (p_text);
end;
procedure to recompile
as
cursor c_invalid
is
Select 'Edit'.
Decode (o.object_type, 'BODY of PACKAGE', 'PACKAGE', object_type)
|| ' '
|| o.Owner
|| '.'
|| o.object_name
|| "compilation".
|| decode (object_type, 'BODY of PACKAGE', 'BODY', ") statement
dba_objects o, (SELECT MAX (LEVEL) dlevel, object_id
OF PUBLIC_DEPENDENCY
CONNECTION BY object_id = referenced_object_id PRIOR
GROUP BY object_id
) d
where o.status = 'INVALID'
and o.object_type in ('PROCEDURE', 'FUNCTION', 'PACKAGE', 'PACKAGE BODY', 'SHOW', 'TRIGGER')
and d.object_id = o.object_id
order by d.dlevel desc, o.object_type, o.object_name
;
Start
for r_invalid in c_invalid
loop
p (r_invalid. Statement);
immediately run r_invalid.statement;
end loop;
end;
end ptapi;
TEST DB
-----------
DB - 10.1.0.5.0
OS - ahc529 SunOS 5.10 Genric_120011-14 sun4v sparc SUNW. Sun-Fire-T200
ERRORS
---------------
35 36 37 p (r_invalid.statement);
38 immediately execute r_invalid.statement;
39 end of loop;
end;
40 41 end ptapi;
42.
WARNING: The body of a Package created with compilation errors.
SQL > show errors
No errors.
SQL > 900 fixed lines
set of 900 pages
Select * from dba_errors where name = order of 'PTAPI' by ASC of line; SQL > SQL >
OWNER NAME ON THE SCRIPT LINE POSITION
------------------------------ ------------------------------ ------------ ---------- ---------- ----------
TEXT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------
ATTRIBUTE MESSAGE_NUMBER
--------- --------------
PTAPI 2 15 1 SYSTEM PACKAGE BODY
PL/SQL: SQL statement ignored
ERROR 0
PACKAGE SYSTEM 1 23 7 PTAPI BODY
PL/SQL: ORA-00942: table or view does not exist
ERROR 0
PACKAGE SYSTEM 4 37 1 PTAPI BODY
PL/SQL: Statement ignored
ERROR 0
SYSTEM PTAPI 3 37 3 PACKAGE BODY
PLS-00364: 'R_INVALID' use the loop index variable is not valid
ERROR 364
SYSTEM PTAPI 6 38 1 PACKAGE BODY
PL/SQL: Statement ignored
ERROR 0
PACKAGE PTAPI 5 38 19 SYSTEM BODY
PLS-00364: 'R_INVALID' use the loop index variable is not valid
ERROR 364
6 selected lines.
PROD DB
--------------
Version of DB - 10.1.0.5.0
OS - ahc524 SunOS 5.10 Generic_120011-14 sun4u sparc SUNW, Netra-T12
Running code
-----------------------
SQL > CREATE OR REPLACE PACKAGE 'SYSTEM '. "" PTAPI3 ".
as
procedure p (p_text varchar2);
procedure to recompile;
end ptapi3;
2 3 4 5 6
7.
Package created.
SQL > CREATE OR REPLACE PACKAGE BODY 'SYSTEM '. "" PTAPI3 ".
2 as
g_part_date_format varchar2 (1000): = 'YYYYMMDD ';
3 4
procedure 5 p (p_text varchar2)
as
6 7 starts
8 dbms_output.put_line (p_text);
9 end;
10
procedure to recompile
11 12 as
Cursor 13-c_invalid
is
14 15 select 'Edit'.
Decode (o.object_type, 'BODY of PACKAGE', 'PACKAGE', object_type)
16-17. ' '
18. o.Owner
19. '.'
20. o.object_name
21. "compilation".
22. decode (object_type, 'BODY of PACKAGE', 'BODY', ") statement
o, (SELECT MAX (LEVEL) dlevel, object_id from dba_objects 23
24 FROM PUBLIC_DEPENDENCY
25 CONNECT BY object_id = referenced_object_id PRIOR
26 GROUP BY object_id
(27) d
28 where o.status = 'INVALID '.
29 and o.object_type in ('PROCEDURE', 'FUNCTION', 'PACKAGE', 'PACKAGE BODY', 'SHOW', 'TRIGGER')
30 and d.object_id = o.object_id
31 order by d.dlevel desc, o.object_type, o.object_name
;
32 33
start at 34
35 for r_invalid in c_invalid
loop
36 37 p (r_invalid.statement);
38 immediately execute r_invalid.statement;
39 end of loop;
end 40;
end 41 ptapi3;
42.
Package body created.

Thanks for your reply.

Actually, we had a problem with a privileged location. the code was written in 9i and db has been improved to 11g.

We therefore made below the privilege, to the owner of the procedure and it worked like a charm.

Select any dictionary to the owner;

Kind regards

Lancerique.

How to recover the partition table (corrupt) for the partition in good health?

Partition (drive H) was working fine, then I rebooted my system normally and the drive is now inaccessible.

"An error occurred reading the file: the file or directory is corrupted and unreadable." (1392).

Window CMD CHKDSK says NTFS file system and "unable to determine the State and version volume.»

[This is a disk external drive with 2 partitions on it - H and Mr. the second partition (drive M) discs works fine.]
[Vista Ultimate OS]

Is there a way I can get it to work or get the data off of it?

Try the procedure described in the article below

http://www.ehow.com/how_7500292_recover-bad-partition-table.html

How to search the dictionary of data for the partitions of the interval?

Oracle 11.2.0.3
When I have a DBA_PART_TABLES request. PARTITIONING_TYPE he says "beach". I want to be able to differential an interval of other partitions of range based in the data dictionary?

used this example. Watch "range".
http://www.rittmanmead.com/2008/09/investigating-Oracle-11g-interval-partitioning/
Oracle Docs list 'SYSTEM' as a partitioning_type that I thought would be intervals.
ALL_PART_TABLES
[code]
1 CREATE TABLE interval_sales
2 (prod_id NUMBER (6))
3, cust_id NUMBER
4, time_id DATE
5, channel_id char (1)
6, promo_id NUMBER (6)
7, quantity_sold NUMBER (3)
8, amount_sold NUMBER (10.2)
9 )
10 PARTITION BY RANGE (time_id)
INTERVAL OF 11 (NUMTOYMINTERVAL (1, 'MONTH'))
12 (PARTITION p0 VALUES LESS THAN (TO_DATE (' 01/01/2005 ',' DD-MM-YYYY "")),)
13 PARTITION p1 VALUES LESS THAN (TO_DATE (' 01/01/2006 ',' DD-MM-YYYY ""));
14 p2 PARTITION VALUES LESS THAN (TO_DATE (' 07/01/2006 ',' DD-MM-YYYY ""));
15 * PARTITION p3 VALUES LESS THAN (TO_DATE (' 01/01/2007 ',' DD-MM-YYYY "")))
SQL > /.
Table created.
Elapsed time: 00:00:00.01
SQL > select partitioning_type from the user_part_tables where table_name = 'INTERVAL_SALES ';
PARTITION
---------
RANGE
[/ code]
```
CREATE TABLE junk1
   ( id         NUMBER )
   PARTITION BY RANGE (id)
   INTERVAL(5)
     ( PARTITION p0 VALUES LESS THAN (5),
       PARTITION p1 VALUES LESS THAN (10),
       PARTITION p2 VALUES LESS THAN (15),
       PARTITION p3 VALUES LESS THAN (20) )
/

CREATE TABLE junk2
   ( id         NUMBER )
   PARTITION BY RANGE (id)
     ( PARTITION p0 VALUES LESS THAN (5),
       PARTITION p1 VALUES LESS THAN (10),
       PARTITION p2 VALUES LESS THAN (15),
       PARTITION p3 VALUES LESS THAN (20) )
/

select owner, table_name, partitioning_type, interval
  from dba_part_tables
 where table_name in ('JUNK1', 'JUNK2')
/
```
TABLE_NAME OWNER PARTITIONING_TYPE INTERVAL

------------------------------ ------------------------------ ----------------- --------------------

GREGS JUNK1 RANGE 5

GREGS JUNK2 RANGE

2 selected lines.

When I type a letter (not when text entries are selected; i.e. for navigation not writing) the browser will automatically search for the letter.

I use letter keys to navigate often, but recently everytime I try, the browser automatically will pop up 'Find in page' and look for him.

Have you checked the setting in "Options/Preferences > advanced > general" (topic: preferences #advanced)?
- Accessibility: "search for text when I start typing.

No luck for the size of the partition, will automatically up to 32 GB

Similar Questions

Maybe you are looking for