No more problems! Business inkjet 1100dtn

Similar Questions

• HP business inkjet 1100dtn how choose the paper tray + stop printing calib random pages.

  Hello. After I finally got my 9 year old HP business inkjet 1100dtn to start printing with 8 years, print heads who threw coward (printer output) for the past 2 years last night, progress post it here:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead/HP-business-inkjet-1100dtn-first-wouldn-t...

  Now I wonder how I can choose which paper tray to print from. Since I use Windows 7 and you must use the driver for hp business inkjet 1000, I guess that the problem here? Someone else you have a solution or better another driver which works better?

  In addition, the printer keeps print calibration pages after each printing I do. The print quality is still not 100%, if only he keeps trying to calibrate because the calibrationpage it prints is of too poor quality?

  Any help would be appreciated.

  Ben of the Norway.

  I tried the driver for the Microsoft 1200dtn instead of the 1000dtn that HP has suggested. Now everything works. Duplex, tray selection, etc. Good times. :-D

• HP Business Inkjet 1100dtn first would not print at all, now prints black and magenta and cyan

  Hello world.

  First of all I must say I spent most of the night reading the posts here, especially this one:

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-Photosmart-C7280-black-ink-won-t-print/TD-p...

  I find that a lot of people are frustrated, but I also find that a lot of people go a long way to help, which is nice. :-)

  I bought a HP Business Inkjet 1100 DTN in 2004 or more and was extremely (!) satisfied with it. This is the best printer I've ever owned when it comes to value for money and durability. However, he was put away for a few years and a friend played with it to make it work. I think also, it has removed the print head and cartridges for awhile. This could possibly make the printheads, ink near the connectors and not dry out the cartridges?

  Anyway, I got home yesterday, and the first think I did was soak the print head in warm water. I don't even bother try everything first. Also, I cleaned up the two electrical contacts for the print heads inside the printer and the print heads themselves. Finally, I used a dozen q-tips to clean ink residues near the two connectors for the cartridges and print heads.

  After all this, I went for a clean full from Windows. The first testpage (power while pressing X on the printer dock) came out as expected... terrible. No black, not yellow, almost no cyan and some magenta.

  I repeated soaking in hot water, only hotter this time (boucherit filled with water in the dish, then dip the lowest 3-4mm of each print head). Each of them sunk ink when I stirred the water so I was optimistic. Yet once, I ran a full cleaning of Windows and print a testpage (hold power while pressing X on the printer)

  Much better this time.

  Now, I had about 50% yellow, which should have been there, 70% cyan, magenta to 90% and the text on the upper part was mostly black. Magenta has helped fill in some places where black does not.

  However, right after cleaning with water or alcohol, it prints fine for maybe 1 testpage, then it is worse. Also I noticed that the black ink is very sticky, so I think he skipped over the years. I know that I can just buy a new set of ink, to make the power contained in the cartridges heads line and heads are full of old and thick ink. Even with heads printing, no need to buy new ones since the supply line is full of old and thick ink.

  I also noticed that the supply line for the cartridges printheads have air bubbles in them. I see bubbles in the yellow and magenta lines, but the cyan and black are too dark to see. I guess that's a problem? I read that energetic cleaning combined with print between the two may over time to solve this problem, but I have to say that I did the cleanings at least 25 tonight and the bubbles are more or less on the same place. (I also notice some bubbles and marked their position). They move when the pump in the cartridges are being exploited, but coming back to the same place after. Almost as if the printheads does not accept ink, are blocked or have internal pressure which must be ventilated. (?)

  So I guess I have to get a kanyle (not sure of the English word), remove the ink cartridge to suck little ink, and then remove the print head and inject the ink, I took the cartridge it is until the power line is free of bubbles also good and old ink. Then replace the cartridge and the head.

  Am I mistaken or I think much too advanced?

  Here are some of the testprints in the correct order. There are many others, but I downloaded the most important.

  

  

  

  

  Note that yellow was there at the beginning, so also was the cyan. Now they are both almost gone again. I suspect than that to have something to do with air bubbles? I'm not sure. Magenta seems to be the only color as well. : PEI

  I also tried the tip to the subject of bumping the cartridge (I did the same thing with the print heads) with no noticeable improvement. Also, I cleaned the rubber gasket on the black cartridge with a paperclip. Of course, he came out with ink, but it was sticky.

  Please answer because I would really get this printer up and running again. :-)

  Ben of the Norway.

  Hi again. Sorry for double posting, but I thought it deserved a post of its own.

  After having tried everything last night (I worked at least 8 to 10 hours on the * beep * printer) I got so sick so I just took all the print heads and tempered 5mm lower them (side of the printhead) in hot water and let it just sit there for 2-3 hours. I had forgot about them when I went to bed. I cut them a bit and inserted into the printer, rand a clean and printed this:

  

  The yellow one is still a little with rays, I guess that some nozzles are always blocked, but at least now I know the formidable powers of the hot water. :-)

  Ben of the Norway.

• Driver HP Business Inkjet 2800 Windows 7 64 bit problem

  Hello

  I've recently updated my PC to windows 7 (64-bit). After that I have a face issue, I don't get running windows 7 64 bit HP Business Inkjet 2800 printer driver. Please help me if anyone with complete operational driver.

  Black only option is off in my printer. I need to activate this option. Please help me anyone know of any solution.

  Hello

  You get the drivers for your printer directly from HP

  Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for her there too.

  • HP Business Inkjet 2800 printer

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• HP business inkjet 1200 auto duplex problem

  Hi, I have a printer HP business inkjet 1200 series with the automatic duplex unit installed. When I try to get the duplex manual, everything works well, but when I try to use the automatic duplexer, the first side prints ok but when the printer pulls the paper back in is at halfway but jams just as the edge of the paper enters the front of the printer. To operate engines running as if the printer is still trying to pull the paper in the printer. I am running windows 7.

  Thank you

  Nathan

  That's what my recommendation would be, Yes.

  -Spencer

• Vista Patch Duplex for Business Inkjet 2230 and 2280

  Some models of printer with automatic duplexer print incorrectly on the back in Vista.  In these models on the back is printed updside down regardless of the driver configuration.

  The attached zip file has a patch and instructions to fix this problem for the Business Inkjet 2230 and Business Inkjet 2280.

  Patches for other models can be found here.

  The zip file contains two files:

  BIJ2230.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpw1rc3l . GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the BIJ2230.pdf file and follow the instructions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

  Placeholder for updates.

• Vista Patch Duplex for Business Inkjet 1200

  Some models of printer with automatic duplexer print incorrectly on the back in Vista.  In these models on the back is printed updside down regardless of the driver configuration.

  The attached zip file has a patch and instructions to fix this problem for the Business Inkjet 1200.

  Patches for other models can be found here.

  The zip file contains two files:

  BIJ1200.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpw1200t. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the BIJ1200.pdf file and follow the instructions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

  Placeholder for updates.

• Can not find the driver for the hp business inkjet printer file

  I downloaded a driver for my printer that has been gutted by hp! How the folder on my computer is used to activate and install the driver or where can I get an active driver for hp business inkjet printer

  Hello Robin,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the number of full model of your HP business inkjet printer?

  Thank you for details on the issue.

  I suggest to read the following article and check if it helps.
  Reference:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• Vista / Windows 7 Duplex Patch for Business Inkjet 1000

  Some printer with automatic duplexer models will print correctly on the back eventually in Vista and Windows 7 on systems that have been updated to Vista.  In these models on the back is printed in reverse regardless of the driver settings.

  attached the zip file has a patch and instructions to fix this problem for the Business Inkjet 1000.

  Patches for other models can be found here.

  The zip file contains two files:

  BIJ1000.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpw1000t. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the BIJ1000.pdf file and follow the instructions.

  Placeholder for updates.

• driver windows Xp 64-bit HP business inkjet 1200n

  I need driver windows XP 64 bits for HP business inkjet 1200n

  Thank you

  Hi RadioCTO,

  You can find more help if you post on one of the aprons for class printers business.  You can check it at:

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.Uk1PqRCrF3s

• Business Inkjet 2200

  I have a HP model computer s5220f with perm windows home 7. 64-bit and I can't do my printer which is a Business Inkjet 2200 on the right impression.

  I have download the USB drive to the printer support.  The right printer keeps printing everything wrong on landscape a half page and then nothing more then 1/2 of the page and then nothing, it retains this doing. I will not buy another printer for my computer. This is a great printer that I need for work. Can you help me please

  Are you using a parallel to usb adapter to connect the 2200 to the s5220f? If Yes, what brand?

• Changine on Business InkJet 2800n IP address

  I'm moving the printer to another network.

  How can I change the IP address on this unit?

  The menu of the unit does not seem to have this function.

  In addition, there are the clients Windows 7 drivers for this printer?

  Update:

  Change address IP IS accomplished by uninstalling the printer software (see page 46 of the manual...) via the control panel "Add or remove software" (also known as the "programs and features" in Windows 7).

  I changed the IP address by using a PC running Win XP on the new network to install specifying a network printer connection.  Because this PC was on the old network, I used the uninstall process, described above, first of all.  If you use a PC XP that did not have the 2800 is installed, you can skip the uninstall.

  I need to install the printer drivers on Win 7 PCs.

  Using a Win 7 PC on the network, I ran Win 7 'Install the printer' specifying a network printer installation. I had to force a search at Microsoft for a update driver Business Inkjet 2800.  This driver is not in preloaded list the Win 7 OS drivers.  Once the pilot was added to the list of HP printers, the installation can complete successfully.

  Notes:

  The software provided with the printer does not install with Windows 7.  If you try, you will get a message asking you to upgrade your Internet Explorer browser to a version higher than 5 (?)

  There is no Win 7 drivers in the download section of HP Business Inkjet 2800.  It IS a Win 7 diagnosis took there, but it won't help you much...  Install the printer in the list of printers driver in Windows 7, forcing a download of Microsoft Update, as described above.

  Problem solved!

• Why not fix update firefox? It must be refined as it is easier to restore the settings, it caused more problems than he solved

  Refresh caused more problems than he solved Firefox.
  I was shocked at the time where I had to restore my settings of waste.

  I believe it may be possible to write a refresh script that does not get rid of all custom settings and bookmarks.
  

  Sometimes it's the settings or something in the user profile that
  the origin of the problem. The update / reset deletes all.

  Look at your desktop. You see a folder called; Old Firefox?

  https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

  These can not get your data back, but will help in the future.

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences

• HP Business Inkjet 1200 D: HP Business Inkjet 1200D duplex option Auto disappeared when it is installed on Windows 10

  When I moved HP Business Inkjet 1200 D of Windows VISTA 64-bit for new Windows 10 64-bit, the printer works fine, but the AUTOMATIC duplex option disappeared.

  I looked under PROPERTIES, SETTINGS, ADVANCED, etc..,.

  Windows search gave "DRIVERS ARE up-to-date"

  I'm puzzled.

  The default value for HP Business Inkjet 1200 seems to be the duplexer is 'not installed '.  You perform the following operations (only once) to enable:

  • Go to the folder devices and printers, right click on the Business Inkjet 1200.
  • Select the printer properties
  • Select the device settings tab.   On the "Installation Options" tab select "Unit duplex (for double-sided printing)", then installed, apply, OK.
  • Close all printer dialog boxes.  When you reopen the duplex printing option will now be available.

  

• BUSINESS INKJET 2800: HAVE IT IE 9 FOR VISTA. CAN NOT INSTALL FOR THE PRINTER DRIVE INKJ 2800 B. MESSAGE: IE 5.00 INVESTIGATION OR LATER

  I WAS TRIYING TO INSTALL DR. PRINTER HP BUSINESS INKJET 2800

  I HAVE IE 9.

  CAN NOT INSTALL THE SOFTWARE.

  A WINDOW WITH THE ERROR MESSAGE SET THIS POSTER:

  INTERNET EXPLORER 5.0 OR LATER.

  HOW CA I FIX THIS FROM LITLE?

  I HAVE THE LATEST VERSION OF MICROSOFT INTERNET EXPLORER FOR MICROSOFT VISTA

  THANKS FOR YOUR HELP

  Hello

  The original CD was made for earlier operating systems.

  Follow these steps to install the printer on Windows Vista, the drivers are already included in the operating system:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3656598&docLocale=en_US&docid=emr_na-c00868762

  Kind regards

  Shlomi