No network traffic VM being withdrawn and any data store Info

Similar Questions

• install esxi 4.1 and the data store on the same server

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL says:

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL,

  Can you give us more details about your current environment?  What is the size and the data store space used? Do you have any storage of additional network attached to the host (for backup purposes)?

  My assumptions of your post do you have 1 stand-alone host with ESXi 4.1 aready installed and you also have a local data store on the same host, but you want to re - install ESXi 4.1 while keeping the contents fo the data store.  Is this correct?

• VM and their data store

  I am trying to find a way to write a script that translates into 2 columns, the name and the data store.  The Name column contains the name of the virtual machine and the data store is the normal name of data store.  I am new to PowerCLI and just get frustrated trying to figure this on my own.  Help, please.

  Try it like this

  {foreach ($vm in Get - VM)
  Get-Datastore - vm $vm | Select @{N = "VM"; E = {$vm. Name}}, name
  }

• Local disk? The host being backed up, the host accommodation VDR, or any data store managed by VCenter?

  In January I will be installing 3 proliants DL380G7 running ESXi 4.1 essential Plus. We do not have a SAN. We would like to use recovery data backup host #1 on Host #2 (which would be a VDR and VCenter) and restaurant to host 3 to Dr. host 2 purposes would also go our tape backup tasks.

  This scenario seems plausible? Can select backup directly from host #1 in a data store that is located on the host No. 3 using VDR?

  Thank you

  Unless you add 2 without you won't have no more redundancy. As I said you can do whatever you want to do, but you will need to do a shared storage to have a visible data store on the other hosts. You can do it with the virtual appliances or physical shared iSCSI or NFS storage. If you make virtual appliances, you will need to have one on each host with virtual machines that you want to protect. The virtual machine will have storage of the local host and for other guests. You will need a camera vDR on each host with virtual machines that you want to protect. You also need enough available to restore the virtual machines in case you have a problem of storage local storage.

• Script in time of latency list vm e/s and the data store the virtual machine is on

  Hello.  We have a vsphere 5.0 environment and we live a latency of IO heavy.  I'm looking for powercli script will get the latency of i/o for each virtual machine and get the data store name, to what it is now.  We will access our storage on optical fiber.  I'm trying to get a good overview of the latency of IO in a nice view in a csv file.  I found what could be a good basis to https://communities.vmware.com/thread/304827?start=0 & tstart = 0 , but I'm not sure how to get the name of the data store in the table and I think that it is written to the nfs in any case storage.  Thanks in advance for any info\advice!

  Try the next version, it includes the average latency time read/write for the virtual machine and PAHO are / s average for the virtual machine.

  Since the CSV has a row for each data store, the values for the virtual machine are repeated.

  I also added the host name

  $vmName = "VM*"
  
  $stat = "datastore.totalReadLatency.average","datastore.totalWriteLatency.average",  "datastore.numberReadAveraged.average","datastore.numberWriteAveraged.average"$entity = Get-VM -Name $vmName$start = (Get-Date).AddHours(-1)
  
  $dsTab = @{}Get-Datastore | Where {$_.Type -eq "VMFS"} | %{  $key = $_.ExtensionData.Info.Vmfs.Uuid  if(!$dsTab.ContainsKey($key)){    $dsTab.Add($key,$_.Name)  }  else{    "Datastore $($_.Name) with UUID $key already in hash table"  }}
  
  Get-Stat -Entity $entity -Stat $stat -Start $start |Group-Object -Property {$_.Entity.Name} | %{  $vmName = $_.Values[0]  $VMReadLatency = $_.Group |    where {$_.MetricId -eq "datastore.totalReadLatency.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMWriteLatency = $_.Group |    where {$_.MetricId -eq "datastore.totalWriteLatency.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMReadIOPSAverage = $_.Group |    where {$_.MetricId -eq "datastore.numberReadAveraged.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMWriteIOPSAverage = $_.Group |    where {$_.MetricId -eq "datastore.numberWriteAveraged.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $_.Group | Group-Object -Property Instance | %{    New-Object PSObject -Property @{      VM = $vmName      Host = $_.Group[0].Entity.Host.Name      Datastore = $dsTab[$($_.Values[0])]      Start = $start      DSReadLatencyAvg = [math]::Round(($_.Group |           where {$_.MetricId -eq "datastore.totalReadLatency.average"} |          Measure-Object -Property Value -Average |          Select -ExpandProperty Average),2)      DSWriteLatencyAvg = [math]::Round(($_.Group |           where {$_.MetricId -eq "datastore.totalWriteLatency.average"} |          Measure-Object -Property Value -Average |          Select -ExpandProperty Average),2)      VMReadLatencyAvg = [math]::Round($VMReadLatency,2)      VMWriteLatencyAvg = [math]::Round($VMWriteLatency,2)      VMReadIOPSAvg = [math]::Round($VMReadIOPSAverage,2)      VMWriteIOPSAvg = [math]::Round($VMWriteIOPSAverage,2)    }  }} | Export-Csv c:\report.csv -NoTypeInformation -UseCulture
  

• Source and target data store mapping query

  I have to get the source and mapping target in ODI interface.

  Which table will I hit to get mapping information.

  E.g.

  Interface: INT_SAMPLE

  Data store: Source_DataStore with columns (cola, colb, teachers) Target_DataStore with columns (cola, colb, cold)

  Well mapping cover the QuickEdit tab and expand the field of mapping mapping is so

  Source_DataStore.Cola = Target_DataStore.Cola

  Source_DataStore.colB = Target_DataStore.colB

  
  

  
  

  Now, I want to get mapping information above as well as the name of the interface and the rest of the column that are not mapped using SQL (is it possible to trick ODI for mapping).

  Hi Prashant da Silva,

  Are you looking for an application to run on the repository?

  If so, it can help:

  select I.POP_NAME INTERFACE_NAME, ds.ds_name DATA_SET
        , s.lschema_name SOURCE_SCHEMA, NVL(S.TABLE_NAME, S.SRC_TAB_ALIAS) SOURCE_TABLE
        , mt.lschema_name TARGET_SCHEMA, I.TABLE_NAME TARGET_TABLE, c.col_name  TARGET_COLUMN, t.FULL_TEXT MAPPING_CRITERIA
    from SNP_POP i, SNP_DATA_SET ds, SNP_SOURCE_TAB s, SNP_TXT_HEADER t, SNP_POP_MAPPING m, SNP_POP_COL c, SNP_TABLE trg, snp_model mt
    where I.I_POP = DS.I_POP  (+)
      and DS.I_DATA_SET = S.I_DATA_SET (+)
      and T.I_TXT (+) = M.I_TXT_MAP
      and M.I_POP_COL (+) = C.I_POP_COL
      and M.I_DATA_SET = DS.I_DATA_SET (+)
      and C.I_POP (+) = I.I_POP
      and I.i_table = trg.i_table (+)
      and trg.i_mod = mt.i_mod (+);
  

  Just add a filter on UPPER (I.POP_NAME) = UPPER ('').

  Kind regards

  JeromeFr

• ESXi 4 and USB data store

  Is it possible to use a USB external hard drive as the data store used by ESXi 4?  If so, how do you implement it?  Thank you very much!

  Hello

  No, I'm sorry to say that this is not supported and will not longer work.

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com

• How to download the file on the Esxi Server using c# and SCP data store

  Hi I want to connect to 6.0 Esxi hypervisor and download a file.

  I write code to connect with esxi:

    using (var scp = new ScpClient("10.8.58.26", 22, "root", "MyPasword"))

  {

  scp.Connect();

  }

  But I'm getting exception "no suitable authentication method proven to complete authentication.". SSH on the hypervisor is now and manually I can connect using PuTTY or winscp.

  I tried with linux and it works. Is it possible to perform this action? How should I authenticate properly to esxi?

  Thanks for the replays, but I understand it on my own. I use winscp library instead of the scp. Code looks like this:

  SessionOptions sessionOptions = new SessionOptions

  {

  Protocol = Protocol.Sftp,

  Hostname = "xxx.xxx.xxx.xxx"

  UserName = "root."

  Password = "MyPasword"

  SshHostKeyFingerprint = "ssh - rsa 2048 xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx"

  };

  ' Private Sub WinScp (SessionOptions sessionOptions, string Cheminaccesfichiersource, string Cheminaccesfichierdestination)

  {

  using (session = Session()) new

  {

  Connect

  session. Open (sessionOptions);

  Download files

  TransferOptions transferOptions = new TransferOptions();

  transferOptions.TransferMode = TransferMode.Binary;

  TransferOperationResult transferResult;

  transferResult = session. PutFiles (transferOptions, Cheminaccesfichiersource, Cheminaccesfichierdestination, true);

  Throw on any error

  transferResult.Check ();

  }

  }

  SshHostKeyFingerprint can be found in "Customize the Logs to view system"-> "Show Support information" of ESXi.

• PowerCLI again migrate ESX host and new data store

  I have 250 VMs that need to migrate to a new cluster and newdatastores, however, I don't see where I can do both in the apowercli script. Does anyone have any suggestions?

  I am really new to powercli and I am usingpowercli6.

  Do you get any error messages?

• vCloud 1.5 and Clusters data store

  Had a look and don't see any indication that they are supported and yet someone has information to the contrary?

  Well, actually by vCAT 2.0 Storage DRS must be completely disabled.

• Separate the VMkernel for pulse data store traffic?

  Hello.

  I was just reading Tech EqualLogic report 'Configuring iSCSI connectivity with VMware vSphere 5 and Dell EqualLogic PS Series storage' and saw something again on pages 3-4.

  Dell recommends to create a vmkernel port highly available on the subnet iSCSI serving as vmkernel default port for pulse data store traffic, so that the pulsation of data store traffic will then sit outside the iSCSI Software initiator and consumes any connection of additional iSCSI storage. He goes on to say that the traffic of pulsation of the data store will always use the lowest numbered VMkernel ports on the vSwitch.

  It makes sense, but this is the first I've heard of this. Everybody does that, with EQ or other iSCSI solutions?

  Thank you

  Brian

  
  

  Not sure that what talking about Dell, but the heartbeat "traffic" data store using the links normal iSCSI. Each host will have a file on one of the heartbeat data stores and open it which means there a lock on the file. The overhead is minimal and there is no need to worry at all.

• Host virtual computer and Migration of data store

  I'm curious. I have an environment with Cisco UCS UC servers without them. Due to they are C-Series all storage is local for UC virtual machines run. I'll add some of the UCS C-Series servers and you want to move two of my current C-Series server CPU virtual machines to the new. I have the license Enterprise Plus 4.1 for all servers and execution of vCenter. The migration will be basicall move local data store to store local data as well under the name from host to host. My plan is to turn off the virtual machines and migrate both host and the data store at the same time. I have groups of ports built as follows:

  Port of VMKernerl groups:

  -Storage (for future shared storage)

  -vMotion

  -PI

  -ESXi Mgmt

  Virtual machine:

  -CPU VMS

  -Machines virtual server

  My overall question is during this migration takes place this network (or a group of Port) will be the traffic go anywhere for the move? My guess is because it is the local storage, it will use the Mgmt. ESXi

  Thank you!

  If the virtual machine will be moved to store Local data to store common data shared through 2 esxi host, then the storage shared for local storage.

  So this will be the case through network vMotion and not via the management network.

  But you can enable vmotion on management network itself. If you have configured like this then yes communication will be via the management via vmotion network IPkerenel active network.

• Help with script from beginner to the data store and hard drives

  Hello

  I am quite new to scripting, and recently, I created a monstrosity below.

  The problem is with the results. I have no idea why in the results I get the name of the virtual machine and its data store over and over again until all disks are highlighted.

  Any help will be very very much appreciated.

  The script:

  $raport = @)

  Foreach ($i in (Get-Content "Y:\vms.txt"))

  {

  $rekord = «»

  $vm = get-vm-name '$i '.

  $dysk1 = $vm | Get-hard drive | where {$_.} Name - eq 'Disk 1'}

  $datastore1 = $dysk1.filename.split("]") [0].split("[") [1]

  $disks = $vm | Get-hard drive

  {foreach ($disk in $disks)

  $hd = «»

  $disksize = ($disk. CapacityGB)

  $hd += $disksize

  {$rekord += $vm.name + ";" + $datastore1 + ";" + $hd}

  $raport += $rekord

  }

  $raport | out-file 'Y:\dyski.csv '.

  The results in csv:

  VM1Name; datastoreName; 60; VM1Name:datastoreName; 50; VM1Name; datastoreName; 40

  VM2Name; datastoreName; 45; VM2Name; datastoreName; 40

  The results of dream in csv:

  VM1Name; datastoreName; 60; 50 40

  VM2Name; datastoreName; 45 40

  etc.

  Try like this

  $raport = @)

  Foreach ($i in (Get-Content "Y:\vms.txt"))

  {

  $rekord = «»

  $vm = get-vm-name '$i '.

  $disk = $vm | Get-hard drive

  $datastore = ($disk | where {$_.}) Name - eq "disk 1" hard}).filename.split ("]") [0].split("[") [1].

  $rekord = "$($vm.)". The name); $($datastore); $(($disk | sélectionnez-ExpandProperty CapacityGB)-join ' |') »

  $raport += $rekord

  }

  $raport | out-file 'Y:\dyski.csv '.

• How to maintain the availability of the data store after the upgrade to ESXi 5.1 with the new IP address and the naming convention?

  How can we maintain access to the presented LUNS and VMFS data store after we improve the ESX in ESXi with the new naming convention and the new model of IP addressing?

  My back-end SAN EMC Clariion is VNX

  Thanks in advance.

  How are the hosts connected to storage systems. With FC HBA for example, there is basically nothing you need to do since the WWN will remain the same and so LUN presentation of the zoning on the switch and storage system does not need to be reconfigured.

  André

• Snapshots and data store management

  Hey, I'm pretty new so bear with me.

  I inherited middle of about 50 guests (ESXi 5.0) and 900 VMs. I am looking for input as to how you manage all snapshots and space they use. I am using NetBackup.

  I had a VM down due to one of the three warehouses of data that it is filling. I have two warehouses of 2 TB. Data warehouses are completely implemented in this virtual Windows machine. So, there are only a few GB free after commissioning. The obvious problem is when a snapshot is taken for backups, fills store data and the virtual machine is paused. I see that I can force ESXi 5 invited to use the working directory for the virtual computer, but what happens if I want to redirect shots elsewhere?

  How will you manage all this question if you do not see it?

  Welcome to the VMware forums communities.

  You can use the following steps to change the location of the snapshot for a VM - kb.vmware.com/kb/2007563.

  An alternative to the deployment of a data store that is pretty well filled by a single virtual machine is to use a raw device mapping (RDM).  With a RDM virtual machine is assigned all of the LUNS, rather than using a VMDK and the data store.  This avoid the situation where you have data stores that are pretty well filled right up.

  You can create a RDM in physical or virtual mode.  In your case a virtual RDM would be probably the best which provides instant support.   A physical RDM has more direct access to the LUN, but the snapshots are not supported.  A physical RDM can have up to 64 TB of size, and a virtual RDM is limited to 2 TB.