PowerCLI again migrate ESX host and new data store

Similar Questions

• Migrate ESX hosts to new SAN array

  Hello

  Our company has bought a new SAN storage array and we are looking for an overview on the migration of our ESX SAN infrastructure existing to the new array with minimal downtime. Currently, we use EMX DMX and will migrate to EMC Clariion.

  I thought that we could present the new table to the ESX host and then use SVMotion to move on the virtual machine, and then once we are full and everything is well, remove the old array. I don't know what the best solution practice to it would be...?

  Currently, we are on ESX 3.5 U2 in all areas.

  This sounds like a good idea? Any help is very appreciated!

  Thank you!

  -Mike

  It is exactly what you need to do.

  1. present LUNS of size equal to or greater than those on the existing table.

  2 format LUNS as VMFS data new warehouses.

  3 Svmotion VMs of new data warehouses.

  4. wait for a whille and ensure that everything is fine and then delete the old warehouses of data.

• PowerCLI, vm of moving to the new data store

  Hello

  I have to move vm to a new data store

  What are the good commands powercli

  my version of my CV is 5.0xxxx

  Thanks for your help

  
  

  You can use the Move-VM cmdlet to move a virtual machine to another data store: for example:

  Move-VM - VM "MyVM1" - data store "MyDatastore1".

• Adding/viewing ESX hosts the local data store in vCenter

  Hey all,.

  I am pleased to join these forms and hope I have don't get dessu down for not having a cert VM (I train hard knowledge where and how get it)

  I have recently graduated from networking and am on the fast track in my new career. Now things are as clear as possible so I will try to fill as much

  ESXi 1 - Dell G6, running, 1065491 5.1.0

  Storage adapter - Smart Array P410i

  vmhba0

  Details - Serial Attached SCSI disk HP, ID (naa. #...), name of Runtime: vmhba1:c0:T0:L0, mounted the Non - SSD, block adapter, 1 TB)

  ESXi 2 - Dell G7 5.1.0 running, 1065491

  Storage adapter - Smart Array P410i

  Details-HP Serial Attached SCSI Disk, ID (naa. #...), name of Runtime: vmhba1:c0:T0:L1, mounted the Non - SSD, block adapter, 1 TB)

  vCenter - Win Server 2008 r2 (working on the features of powershell to work with packages from CodePLex)

  ESXi hosts in a single datacenter, with one single Cluster... in this cluster is a SAN that the two hosts can access without problem

  When I click on Cluster 1-> summary-> Storage (local storage shows ESXi 1 and SAN storage) NO ESXi 2 of local storage.

  When I click on ESXi 1 host in vCenter and then click on summary or Configuration (Storage)... it will show the SAN and hosts local storage

  When I click on ESXi 2 host in vCenter and then click summary or Configuration (Storage)... it will show the SAN and NOT hosts local storage

  How can question I view and manage local storage of 2 ESX via vCenter?

  At the moment I have to hand, log in to ESX 2 via vSphere thickclient and see its local data store.

  I was talkin to some people on #vmware in IRC, but can't seem to understand why... is something mmiss configured? I thought that this would have been a no-brainer... I tried to 'find new warehouses of data' on the ESX 2 in vCenter, no dice.

  Help

  Welcome to the community - I would try to remove the host to vCenter and see if you can see the local storage.

• ESX 3.5 move VM OS to a new data store

  Update of ESX 3.5.0 Build 4 153875

  I have a front-end server, Exchange 2007 (2008 x 64 OS), which has only a single drive (OS) configured on a data store presented by Clarion AX4.5 SAN. I wanted to move this disk in another data store that has more free space and the highest performance, but I'm not sure of the exact procedure.

  1 so I wanted instead of the disc on the data store runnign run it on the data store 2.

  Can I clone it to the same ESX host and simply select the new data store? Or would it be preferable to P2V to the new data store. This seems like it should be simple, but I'm stuck on what is recommended for this. Of course, since it is the front-end exchange I want nothing to screw.

  Thank you in advance for your help!

  If you have virtual center the easiest might be to cold migrate stop the virtual machine and migrates - you can leave it on the same ESX host, but will give you the ability to move the virtual disk.

• How to migrate Office persistent link clones of workstations for the new data store

  Hello. We have clones of persistent link to view running in the environment from our view. We need to migrate these desktops to new storage. Rebalancing is out as this will include a refresh operation - destroy anything and everything installed in c:\ of the user. Is there a method to migrate Desktop clone link persistent to a new data store, while keeping the office in the same exact state (i.e. c:\ is not updated).

  Thank you

  Never say impossible. I came across the solution when I read the article by Duncan Epping:

  http://www.yellow-bricks.com/2012/03/15/Dr-of-view-persistent-linked-clone-desktops/

  I have that for my situation. Basically, replicate data from view in the new storage warehouses. Set up data warehouses replicated without re-signing with the cluster of ESXi. Turn the power off and unsubscribe the vCenter view workstations. Save the workstations from the data store replicated/mounted to vCenter and power over desktop computers.

  VCenter, nothing dramatic has happened if she sees just as vm being unregistered and re-recorded activity from the same exact data store (the same UUID). View Admin is happy because he sees just the events as desktop computers that have been turned off and then subsequently in reverse. Nothing has changed regarding the database to view ADAM, we still use the same data warehouses.

  I have already tested before for a scenario of View DR, and he succeeded. Between remembering who and Duncan's article helped me to adapt the same process for this. Nothing is impossible

• Strange problem after moving from the virtual computer to a new data store

  I am migrating our VM existing (8 in total) a 'problem' RAID to a new table on a new controller and am having a strange problem. Here are the steps I took (host OS is Ubuntu 8.0.4 LTS x 64):

  (1) off the power the virtual computer from the Web interface

  (2) the directories created for each virtual on the new RAID array computer (in this case a RAID 10 array on LSI 9750-8i controller)

  (3) rSync used to copy the data from RAID1 to be RAID2

  4) has created a new data store on the new RAID through the Web Server of VMWare user interface.

  (5) removed VM of the inventory through the Web, their return, added user interface then choose files .vmx on new data store on RAID2

  They have all power save fine... but three of them are not accessible on the network. I can open a console in the Web Server of VMWare user interface and they all run normally... but I can't their ping or access the respective virtual machine Web GUI. It seems quite arbitrary that those who work and those who are not. In this case... the VM that don't work is a license Autodesk, a Squid proxy server and a VM of cactus. All three of these virtual machines are 32-bit Ubuntu Server VM (two 8.0.4 and a 10.0.4)... and are the only Ubuntu VM on this host. It must be signifigant but I'm not see how.

  If I delete these three virtual machines of the inventory again and add to their original location (on the RAID1) they light up AND work normally. A consultant that we were working seemed surprised, as he had also done this experiment with some of the older VMWare products. I don't see how it would be the physical location of the files of the virtual machine. Any ideas?

  We rely on the migration to ESXi soon but in the meantime, we get these a few VM out of this RAID array problem. I'm stuck.

  Depending on the application, it may be enough to reconfigure the IP parameters (they are very probably on DHCP now) for the newly detected virtual NIC.

  André

• Cannot add the new data store

  VM dear supporters,

  My vSphere environment: 1 vCenter Server Foundation, 3 vSphere 4.0 Enterprise 5.0 and vSphere Client 5.0

  1. read the error message in the attachment:

  "hostdatastoresystem.queryvmfsdatastorecreateoptions...". »

  2. already the ESX02 reboot but still unable to add the new data store.

  New size of the data store = 3.1 TB

  Need to vmsupport on this subject.

  Thank you

  Hello

  Size Max LUN VMFS is 2 TB-512 MB in vSphere 4 (your hosts are in version 4), if you want to add 3.1 TB LUN first upgrade ESX hosts to version 5

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Failed to get the disk partition information when you add the new data store

  Hello

  Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.

  I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)

  I use Dell R900 with an EMC Symmetrix VMax SAN

  The size of the LUN I want to add is 741 GB

  Concerning

  Marius Aulie

  If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:

  -set the LUN as a GROSS physical to virtual machine device

  -Run diskpart, select the drive and run the CLEAN command

  -detach the LUN to the virtual machine

  -try to create the data on the LUN VMFS store

  The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.

  André

• VM and their data store

  I am trying to find a way to write a script that translates into 2 columns, the name and the data store.  The Name column contains the name of the virtual machine and the data store is the normal name of data store.  I am new to PowerCLI and just get frustrated trying to figure this on my own.  Help, please.

  Try it like this

  {foreach ($vm in Get - VM)
  Get-Datastore - vm $vm | Select @{N = "VM"; E = {$vm. Name}}, name
  }

• Comment fails to power after moving to a new data store.

  I had this problem a lot where migrate machines. I navigate to the data store appropriate and right click on the folder of the guest, and I select "move". I choose the new data store and sit back and watch the progress bar. Once its migration adds the guest to the inventory and try to power on. Sometimes it works, sometimes I have to repeat the steps above twice. Why missing files when trying to turn on when I move the files this way?

  Right-click on the virtual machine, click on migrate.  Follow the prompts for destination until you reach the Select data store.  Click the radio button "Move virtual machine and virtual disks configuration files" and select the new data store.

  -KjB

• Copy of VM to the new data store

  I need to copy an existing virtual machine to one datatstore to the other, initially, I thought that I would be able to register to the VM, clone the virtual machine and then unregister the virtual machine.

  Unfortunately the VM I will be copying is the virtual Center VM and therefore this action must be carried out while it is connected to a host and cloning is a feature of VC.

  Is the best method to use the New-TkeDatastoreDirectory and TkeDatastoreFile-copy to copy these through to the new data store?  I think I read earlier that it does not work or is very slow for large VMDK files?

  Thank you

  Alan

  Jobs published post PS converter. See the work of automation Converter Enterprise with ch

• ESXi 4: error in live migration (VMotion) to the different data store (Local SATA to iSCSI SAN)

  Hi all

  I have a problem during VM migration live in the different data store, the specifications of the virtual machine is just Windows 2003 x 64 installed with the latest VMWare tools.

  Here is the error message:

  Move the virtual machine

  Win2003x64_RST01

  A general error occurred: detected Source this destination could not resume.

  The active state of VM migration

  any idea what could cause this please?

  Kind regards

  AWT

  Check that the machine ESX4 has prevention performance virtualization and data, indicators enabled in the BIOS. I could move 32 bit machines vmotion Unflagged VT turned on in the BIOS, but 64-bit machines could not begin until I activated the flag of VT in the BIOS.

  Also try to clear the mask of the source of the VM CPU before migrating, providing the hosts have the same hardware.

• New data store poster do not amount to expected storage

  I'm running vSphere 4.1 and you just create a new table and the data store on my SAN. He has the ability to Go 2 233,641.  (5 x 600 GB discs @ RAID 5). It is now attached to VMWARE and I added all this storage using a block size of 4 MB, I want to meet a larger than 512 GB vdisk.

  When I look in the Storage/Configuration it shows only 185,50 GB capacity!  Why is this and how to support a vdisk > 512 GB?

  Can anyone help please.

  Thank you

  Ron

  Most of the paintings and RAID controllers allow to split the gross space in several logical volumes that are then presented the operating systems. Assuming that your controller supports this, I create a vast set of RAID5 with all 6 discs and divide the resulting RAID defined in 2 logical volumes, where each of them is less than the maximum supported size of the LUN (2 TB - 512Bytes). This way you get as much space on the disks in a single set RAID5.

  With this amount of disk space, you can also consider using one of the disks as a hot spare.

  André

• Move a vmdk file finely put in service a new data store - now it's thick?

  Hi all

  To elaborate a little bit on the title, I installed a second hard drive in my ESXi 4 server.  All my VMs use discs finely put into service, however, after that I moved the files of the virtual machine to the new data store (using mv) and readded the virtual machine to inventory, the disks are provided are thinner but are thick.  This behavior is expected?

  This is behavior expected - don't use mv to VMDK!

  Use rather
  vmkfstools-i thin d

  who should be faster, more reliable and give you a choice for the type of provision