No noise, not able to reactivate sound

Similar Questions

• Not able to reactivate sound

  Deactivate, reactivate the sound

  my volume button on the laptop turned on that dumb and it will not respond to activate the sound. No sound is available from PC with or without headphones

  Hello

  1. don't you make changes to your machine before the problem?

  Follow all the steps mentioned in the link in order to solve the problem below.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Not able to hear sound on the Normal mode and safe mode.

  original title: windows-screen is frozen on normal mode had to cut the power to go in safe mode no sound on all channels

  Windows-screen is frozen on normal mode had to cut the power to go in safe mode no sound on all channels

  Hi break it,
   
  (1) you are able to boot to the desktop normally?
  (2) remember to make changes to the computer before the question?
  (3) to when was the last time the sound was working fine?
  (4) what do you exactly mean by windows-screen is frozen?
   
  See the methods mentioned below and check if that helps.
  Method 1:
  Windows 7 hangs or freezes
  http://support.Microsoft.com/kb/2681286
   
  Method 2:
  Perform the system restore from SafeMode at an earlier date if the system worked very well.
   
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Method 3:
  If you are facing problems with the audio, see the following link:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
   
  Hope this information helps.

• Not able to hear sound in Windows

  Original title: sound problem

  I can't listen to all sounds. This box always rises and say with "what program will open it with. How should I do?

  Hello

  1. Once you get that box?

  2. what happens when you try to play all the songs?

  3. you remember make changes to your computer before this problem?

  Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

• Not able to get sound in video (.wmv) file when you import video clips (.m2ts) to video recorder Cannon using Windows Live Movie Maker

  Unable to get sound when you import video clips (.m2ts) Cannon for Windows Live Movie Maker video recorder or on the video file (.wmv).  Does anyone have a suggestion as to how this can be done?

  Hi RichGraff,

  • You have sounds in the VCR of Canon?
  • Are you facing problem with this video or other videos as well?

  For now, I suggest to import the video clip in Windows Movie Maker, which is an application integrated into Windows Vista and check if you get its in.

  Reference:

  A problem of importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker

  Import video, photos and audio on Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I had uninstalled the audio driver by mistake when I realized it I installed it again but I still not error message such as no audio output device installed so am not able to play sounds?

  What is the way out? Please explain step by step, am not pro tech. I use the Realtek audio driver.

  Hello

  Thank you for keeping us posted.

  I would like you to contact the computer manufacturer for assistance.

  Feel free to contact the Microsoft Community for issues related to Windows in the future.

• no noise from the window and not able to hear movies net movie

  No sound from the computer, not able to hear flck net movies

  The following link might be worth a visit:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

• I am not able to hear the sound even if my drivers are installed properly in windows 7

  I am not able to hear the sound even if my drivers are installed properly in windows 7 and the test tone does not work for 1 month I am facing this problem please help.and windows media player also has a problem saying "Windows Media Player cannot access the file. "The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be not correct" Please help...
  I have media chip c with creative 5.1 speakers.
  until this works perfectly...
  I am facing this problem since I made a mistake.
  only, I went to run and went into 'msconfig '.
  After that, I marked start diagnosis then applied
  After having no repeat no sound...
  and then I clicked on normal start, but still I can't get my sound help please

  Hello

  1. What is the brand and model of your computer?

  2. this issue occurs when access to a particular file by using Windows Media Player?

  3. do you see red X on the volume icon in the notification area?

  4. are you able to access the files of music from the original location?

  You can follow the suggestions and then check.

  Solution A: For sound program on your computer.

  Method 1

  You can follow the steps listed below:

  a. right click on the volume icon in the notification area.

  b. go to the playback device and right click on the empty area.

  c. Select Show disabled devices and Show disconnected devices.

  d. right-click on the pregnant , select Activate and go to the Properties.

  e. use of the device select use this device (enabled)

  f. click apply and OK.

  Method 2

  Make sure that the Windows Audio service is started.

  a. click on start.

  (b) in the search box, type services

  c. right click on Windows Audio and go to Properties.

  d. Select Automatic from the Startup type drop down.

  e. click on start.

  f. click apply and OK.

  g. restart the computer.

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Solution B: Due to Windows Media Player.

  Method 1

  You can run the troubleshooter in Windows Media Player.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2

  You can address everyone on the file.

  a. right click on the file and click on Properties.

  (b) in the Properties window, click on Security tab.

  c. now, click on Edit , then click on Add.

  d. now, type everyone in the box and click OK.

  e. then check the full control box.

  f. click apply and then click OK

  See also:

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

• I'm not able to get the sound card drivers for a sony VAIO desktop computer

  I'm not able to get the audio drivers for a sony VAIO desktopPCV 2253 someone can help me get t for free

  Hello

  Check with the Sony Support, their drivers and documentation online and ask in their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• iTunes is not able to find the USB controller on PC desktop computer and laptop

  Hello

  Since the two versions of iTunes for Windows (10) diagnostic program tells me a green dot in front of "USB-connections", but didn't tell behind the "no-USB controllers found. That's why my iTunes is not able to connect to the iPhone 5. I have the same problem on my desktop and on my laptop. Windows detects all my USB Ports, well. If someone can solve it? Thank you.

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• After the update of the Mavericks, I'm not able to sync audio in a flash animation.

  Hello

  After the update of the Mavericks, I'm not able to sync audio in a flash animation.

  I did:

  1 has created an animation

  2 Adding audio to the timeline

  3. Sync selected in the sound Properties window.

  According to what I've done was to adjust the animation to the sound and you press 'enter' plays the audio, it actually creates a noise.

  Hope you guys have my problum

  Please notify.

  Kind regards

  Rabi Raja

  The new update (version Flash Pro CC - November 2013) which has a fix for this 10.9 OSX sound hum issue is now available for you. This update of Flash CC will update your version of flash to 13.1.0.217.

  You can update the application Adobe Creative Cloud or Flash Pro CC help-> Update menu.

  You can find more information about the update: http://helpx.adobe.com/flash/using/whats-new.html

  Thank you

  -Reynaud

• Not able to install the common module on satellite Pro A120

  Hi guys:
  I recently reinstalled xp professional on my satellite pro A120. I could download and install the main drivers of http://uk.computers.toshiba-europe.com and my phone is functional. However, I did not all sounds and (F6 & F7 and toggle) function keys not working, even after insalling the sound card. I read some of the posts on this forum and found that I needed insall the 'common' module to make them functional. I downloaded the driver from module common too, but when I run the Setup it starts initially, but fails both the configuration is complete.

  The same thing happens also with a few other drivers as saver of energy etc... I was not able to run the Setup program for the common module & driver power saver, basically, nothing happens after I have the respective installation.

  Can anyone help please?

  Pravesh

  As far as I know on the download page you can find the installation instructions with exact installation document order how to install drivers and tools specific to Toshiba and utilities.
  You have installed all the stuff after this installation order?

• Tecra A3 - 152 - not able to read CD - R (or CD - RW), burned by itself or another PC

  Hello

  My TECRA A3-152 offers the CARPET * a DVD-RAM UJ - 831S player (1.40 firmware version) with the Microsoft (dated the 1.07.2001) 5.1.2535.0 driver
  The laptop is not able to read the CD - R or CD - RW engraved with any other PC (or alone). The CD is reported as empty.

  However, the reader is able to read commercial CD - R with SW or sounds or other stuff.
  After several hypotheses about the SW problems or compatibility issues, I intend to replace the drive with another.

  Any suggestion?

  Thanks - regards
  Antonio Giarrusso

  Hello

  Maybe it s only a problem of compatibility. In my experience not on each CD or DVD is compatible. I mean that not every CD manufacturing is supported by the firmware and so this question might appear.

  But let's try some common tips.
  First of all, I would recommend delete Sonic record now and the DLA.
  Then restart the computer and enter the registry.

  1. in the registry editor, expand my computer, and then expand HKEY_LOCAL_MACHINE.
  2. expand SYSTEM, and then expand CurrentControlSet.
  3. expand Control and class.
  4. under category, click on {4D36E965-E325-11CE-BFC1-08002BE10318}.
  5. in the right pane (topic area), click UpperFilters and delete. Click then click LowerFilters and delete is also.
  6. click on Yes to confirm the deletion.

  After this procedure, restart the laptop and try to read the CD

• Pavilion dm4 - 1063cl: Bios word password screen beep &amp; not able to enter characters

  I boot to see the Bios password screen.
  The system seems continuous short beeps.
  I'm not able to enter the password or any character to go beyond the the Bios password screen.
  Sometimes a character, indicated by *, is entered in the password box but not matching does not to my favorites key.

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I'm sorry for the problems you have. I'm afraid that beeps usually indicate the sound of the motherboard and is not a good sign - usually some sort of hardware failure or problem.

  Please, read these two articles and try to find solutions for your problem/situation:

  > http://support.hp.com/gb-en/document/c03515402

  > http://support.hp.com/gb-en/document/c01732674

  If nothing helps, you must bring your computer (or ship it) to the service center of authorized HP Service Center where technicians can control on-site and fix. If your computer is still under warranty, or you do not know where such a Center, please contact HP support > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

• No noise of operating system, no sound on YouTube and online TV.

  Original title: no noise of operating system, no sound on YouTube and online TV. Sounds on the speakers with or without headphones ok, sound OK on netradio ok and windows mediaplyer.

  Windows Vista Home Basic, Realtek High Definition Audio. I updated the driver for sound card and I tried Microsoft difficulty It Center without result. When I test the speakers sound is ok, but no sound when I test windows operating sounds. In service, the window is Windows Audio started. Generator endpoint Windows Audio is not there. I have checked the volume control, acoustic window, test tone, sound effects and sound levels. Only the sounds of window aren't there when I test.

  1. I tried method 1: uninstalled and installed the audio driver: still no system sounds and no sound on YouTube and TV.

  2. I did a file system check (sfc/scannow): "Windows Resource Protection has not found any breach of integrity."

  3 Microsoft Fix Center tells me that soundservices one or more are not performed and that Windows Audio and Windows Audio endpoint Builder should run and that one of these services do not work.

  4. in the services window, Windows Audio is started. Generator of Windows endpoint is not there.

  Who is the problem and what can I do?