Not able to hear sound in Windows

Original title: sound problem

I can't listen to all sounds. This box always rises and say with "what program will open it with. How should I do?

Hello

1. Once you get that box?

2. what happens when you try to play all the songs?

3. you remember make changes to your computer before this problem?

Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

Tags: Windows

Similar Questions

  • Not able to hear sound on the Normal mode and safe mode.

    original title: windows-screen is frozen on normal mode had to cut the power to go in safe mode no sound on all channels

    Windows-screen is frozen on normal mode had to cut the power to go in safe mode no sound on all channels

    Hi break it,
     
    (1) you are able to boot to the desktop normally?
    (2) remember to make changes to the computer before the question?
    (3) to when was the last time the sound was working fine?
    (4) what do you exactly mean by windows-screen is frozen?
     
    See the methods mentioned below and check if that helps.
    Method 1:
    Windows 7 hangs or freezes
     
    Method 2:
    Perform the system restore from SafeMode at an earlier date if the system worked very well.
     
    What is system restore?
     
    System Restore: frequently asked questions
    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
     
    Method 3:
    If you are facing problems with the audio, see the following link:
    Tips for solving common audio problems
     
    Hope this information helps.

  • I am not able to hear the sound even if my drivers are installed properly in windows 7

    I am not able to hear the sound even if my drivers are installed properly in windows 7 and the test tone does not work for 1 month I am facing this problem please help.and windows media player also has a problem saying "Windows Media Player cannot access the file. "The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be not correct" Please help...
    I have media chip c with creative 5.1 speakers.
    until this works perfectly...
    I am facing this problem since I made a mistake.
    only, I went to run and went into 'msconfig '.
    After that, I marked start diagnosis then applied
    After having no repeat no sound...
    and then I clicked on normal start, but still I can't get my sound help please

    Hello

    1. What is the brand and model of your computer?

    2. this issue occurs when access to a particular file by using Windows Media Player?

    3. do you see red X on the volume icon in the notification area?

    4. are you able to access the files of music from the original location?

    You can follow the suggestions and then check.

    Solution A: For sound program on your computer.

    Method 1

    You can follow the steps listed below:

    a. right click on the volume icon in the notification area.

    b. go to the playback device and right click on the empty area.

    c. Select Show disabled devices and Show disconnected devices.

    d. right-click on the pregnant , select Activate and go to the Properties.

    e. use of the device select use this device (enabled)

    f. click apply and OK.

    Method 2

    Make sure that the Windows Audio service is started.

    a. click on start.

    (b) in the search box, type services

    c. right click on Windows Audio and go to Properties.

    d. Select Automatic from the Startup type drop down.

    e. click on start.

    f. click apply and OK.

    g. restart the computer.

    See also:

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Solution B: Due to Windows Media Player.

    Method 1

    You can run the troubleshooter in Windows Media Player.

    Open the troubleshooting Windows Media Player settings Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2

    You can address everyone on the file.

    a. right click on the file and click on Properties.

    (b) in the Properties window, click on Security tab.

    c. now, click on Edit , then click on Add.

    d. now, type everyone in the box and click OK.

    e. then check the full control box.

    f. click apply and then click OK

    See also:

    What are the permissions?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

  • no noise from the window and not able to hear movies net movie

    No sound from the computer, not able to hear flck net movies

    The following link might be worth a visit:

    Windows 7 - no sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
    (valid for XP - Vista - 7)

  • not able to see my files windows Messaging on why and what to do

    Since Monday not able to see files on windows mail you can any one help?

     

    If you do not see the folder list when you open WinMail, then go to view | Layout and activate the list folders or the folder bar to view the folders.  If the folder list is present, but you do see some files, then try to compact and repair the database by using my Windows Mail utility (www.oehelp.com/WMUtil/).

    Steve

  • Can't hear sound in Windows

    Original title: Sound

    I have a compaq presario cq60 laptop. I am gettong no sound except if I plug my headphones. All the answers?

    Michael

    Hello

    ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

    ·         What operating system is installed on your computer?

    I suggest you follow the steps mentioned below:

    Method 1:

    Open audio store and check if the problem occurs, do in the link below:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    Method 2:

    Check if the default audio device is properly defined. Follow these steps:

    a. click the Start button, select Control Panel, click hardware and soundand then click sound.

    b. click the read tab make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)

    c. If your default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.

    d. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

    If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

    e. Select the audio device you want as audio device by default, and then click set as default.

    f. click OK to save your settings.

    For your reference, follow the steps described in the following link:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Method 3:

    If the previous step fails, proceed to the following link under the no sound in windows:

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • I forgot the user name, not able to log in to windows?

    Received a computer from dell desktop of my son with XP Professional on this topic, after trying to add my name as a user I am not able to open windows. Ask me password and username type. Son said he never put an in any password. I don't know password, user name not. Help

    Sorry to be late to respond to the answer. Nothing seemed to help, so took computer geek store, he has received to date. Had a software problem that they can fix it for $39.00. Thanks for the help keep up the good work. Anita

  • No noise, not able to reactivate sound

    MUTE button problem

    I turned on my computer the other day and I have no sound whatsoever, but the icon in my right panel says I have full volume and it is turned upwards completely. The volume button, however, above my keyboard seems to be stuck on mute. Ways to solve this problem?

    I turned on my computer the other day and I have no sound whatsoever, but the icon in my right panel says I have full volume and it is turned upwards completely. The volume button, however, above my keyboard seems to be stuck on mute. Ways to solve this problem?

    ====================================
    Perhaps the following goods range offers a few ideas:

    Windows 7 - Vista - XP - no sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Solving audio problems in Windows Vista
    http://www.ehow.com/how-does_4966770_troubleshooting-sound-problems-Windows-Vista.html

    Windows Vista - tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Not able to reactivate sound

    Deactivate, reactivate the sound

    my volume button on the laptop turned on that dumb and it will not respond to activate the sound. No sound is available from PC with or without headphones

    Hello

    1. don't you make changes to your machine before the problem?

    Follow all the steps mentioned in the link in order to solve the problem below.

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • Realtek High Defination Audio speakers is not plugged in, no sound in Windows

    Hi guys.

    I got my PC for about 2 years now, and all of a sudden my audio stopped working. When I go to manage my audio devices in the Control Panel, it says "realtek high definition audio speakers are not connected. I use the onboard sound on the motherboard Asus Maximus V extreme.

    Therefore, the realtek digital output has been selected automatically. I since changed it NVIDIA high definition audio digital output - so that sound for now plays on my speakers monitors via the HDMI cable.

    I tried my speakers on an MP3 player and they work no - including the cable, so the speakers and cable are not a problem.

    I tried to restore the pc to a time where noise - WORKS DO not STILL working.

    Downloaded the latest drivers Realtek and installed - DOES NOT ALWAYS WORK.

    Deleted the latest drivers and install them from the CD of motherboard drivers - DOES NOT ALWAYS WORK.

    I disabled all audio devices, hoping that speakers will then - DO WORKS not ALWAYS. Help, please...

    System:

    Windows 7 Pro 64-bit

    Extreme Motherboard Asus Maximum V

    MSI N460GTX Cyclone OC GPU

    Hello Chantal,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You made any hardware or software changes on your computer before the show?

    Thank you for details on the question and your efforts to resolve.

    This problem can occur either because of corrupted audio drivers or incorrect audio settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Troubleshooting of audio playback and check.
    Reference:
    Open the troubleshooting of Audio playback
    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions contained in this Microsoft support article and check the issue.
    Reference:
    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • I have home premium Windows 7 with activation key. I replaced everything at the time of hard disk. I'm not able to activate Home premium Windows 7 please guide me

    I have home premium Windows 7 with activation key. I replaced everything at the time of hard disk. I am not able to install or upgrade Home premium Windows 7

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Not able to check the upgrade - Windows 8

    Original title: updates

    A blue bar keeps coming back, it says: Windows needs your help: so he said windows update was not able to verify the new updates for the last 30 days. Go to windows update to fix the problem. I tried all the ideals? This bar keeps coming back every 15 seconds, I'm going to windows updates and it does not update.

    Hi Michael,

    Thanks for posting your query in Microsoft Community.

    I understand that you receive a blue bar to go the Windows updates to check for updates and install to keep the computer up-to-date, but it fails. I'll be happy to answer your query. Let me ask you;

    • What security software is installed on the computer?
    • Using proxy connection?

    This may be due to reasons various, such as the files required by Windows update is missing or damaged, connection proxy security, software, etc. Let's try the following methods and check the status.

    Method 1: Run the Windows Update troubleshooting tool

    1. Open the Windows Update troubleshooting tool by hitting swipe in the edge right of the screen, tap Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), entering the Troubleshooting in the search box, by typing or clicking on settings then tapping or clicking on the resolution of the problems. Under system and security, tap or click fix problems with Windows Update.

    2. Run the troubleshooter, and then open Windows Update and try installing the update again.

    Method 2: Turn off the proxy connection

    Press Windows key + R, type inetcpl.cpl , and then press OK

    Click on the connections tab, and then click LAN settings

    Uncheck the option use a proxy server for your LAN

    Click OK

    Method 3: Disable security software

    Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

    Method 4: Run the DISM tool

    1. Enter in the right edge of the screen and then click on Search.
      (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

    2. Enter command prompt in the search box.

    3. In the results list, drag down on or right click command prompt, and then press or click run as administrator.

    4. In the administrator: command prompt window, type the following commands. Press ENTER after each command:

      DISM.exe / Online/Cleanup-image /Scanhealth

      DISM.exe / Online/Cleanup-image /Restorehealth

    5. To close the administrator: command prompt window, type Exitand press ENTER.

    6. Run Windows Update again.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • Microsoft Lifecam vx 3000 - recipient not able to hear the sound

    I installed the LifeCam as stated but my recipient can't hear me.  We see each and I hear them, but they don't hear me.  Could someone please help.  I'm not really savvy in computer science, but I try.  Thank you.

    Hello

    I understand that you are facing problems with Microsoft Lifecam vx 3000.

    1. what program you use to video chat?
    2 have you tried to use this webcam with other programs?
    3. do you get an error message?

    I suggest to see the next procedure and check if it helps.

    Method 1:

    I suggest to run the hardware and devices Troubleshooter and check if it helps.

    Open the hardware and devices Troubleshooter


    http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:


    Exercise the functions mentioned below to adjust the Microphone as default:

    1. Click Start and click on Control Panel.
    2. click on sound, then a new window will open.
    3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
    4. now check if the Microphone is listed there and right-click on it and choose activate.
    5. Select the Microphone, and then click "Set as default".

    Note: Also in the playback check if the speaker is set as default. Method 3:

    Method 3:

    I suggest you to install the latest drivers for webcam If the problem persists.

    You can follow the link given below to download the driver for Windows 7

    http://www.Microsoft.com/hardware/en-in/d/LifeCam-VX-3000

    Reference:

    LifeCam problems

    http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup

    Hope this solves the problem. If this problem persists, then please get back to us with the results of these methods and any additional information. We will be happy to help you.

  • Not able to get sound in video (.wmv) file when you import video clips (.m2ts) to video recorder Cannon using Windows Live Movie Maker

    Unable to get sound when you import video clips (.m2ts) Cannon for Windows Live Movie Maker video recorder or on the video file (.wmv).  Does anyone have a suggestion as to how this can be done?

    Hi RichGraff,

    • You have sounds in the VCR of Canon?
    • Are you facing problem with this video or other videos as well?

    For now, I suggest to import the video clip in Windows Movie Maker, which is an application integrated into Windows Vista and check if you get its in.

    Reference:

    A problem of importing files into Windows Movie Maker

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker

    Import video, photos and audio on Windows Movie Maker

    http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • not able to hear the sound of the cellular caller

    my brother bought a Apple Watch 38 mm sport. But after the update to os 2.1 we couldn't here the voice of the caller please say a quick solution

    Rgds

    Ajith

    Hi asmaa

    It can help to turn off pairing your brother in a Bluetooth headset iPhone, if it is currently associated with it.

    Otherwise, it can help to restart the iPhone and his watch. Turn on both devices off the power together first, then restart the iPhone before you restart the Watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the logo.

Maybe you are looking for