No Raid or RAID? I have two drives. How will I know if the RAID?

I have a XPS400 with two Maxtor drives.  I don't know if they are configured on the RAID configuration.  I want to get rid of these two disks and put in a new 500 GB drive, but windows XP cannot see the drive on the installation of the OS.  BIOS, he sees.  By examining the data on two disks, by car it is about 75% full and employs two drive. I'm sorry, I'm so dumb on RAID configurations.


Tags: Dell Drives

Similar Questions

  • How will I know if the RAID fails?

    So, I have a box of ESXi built on office for home equipment. I want to set up a RAID 1 storage room but I don't know how I know if one of the disks dies. VSphere allows to know if one of your drives in your RAID is bad?

    Hello

    your material on the VSphere client status tab will trigger a red or yellow alert on storage if one of your raids comes to shove as much your CIM service is running, but it will not let you know what raid failed.

    who should be checked from the specific tools of storage.

    http://blog.corneredge.com/2011/03/02/VMware-ESXi-Server-keeps-running-with-failed-RAID-array/

    Thank you

    Avinash

  • How do I know if the two tables are the same in the data they contain

    Hello

    How will I know if the two tables are the same in the data they contain?

    Hello

    Please check this thread [compare all columns | http://forums.oracle.com/forums/thread.jspa?messageID=3166309�].

    Kind regards

  • Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

    Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

    This is not a formula, but a constant simple schema of a table complex. Wire remains, then do a right click of the terminal of the initializer of the feedback node and select "create constant. That should do it.

  • I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

    I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
    Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

    I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

    Any help will be appreciated. I really need help.
    Thank you.

    Well, try this:

    1. If the power is off.
    2. Start the laptop and keep press F8
    3. then select restore.

    And? :)

  • How will I know if I have Seagate drives on my computer?

    How will I know if I have Seagate drives on my computer? Where should I LOOK? And on the computer does not start, without rhyme or reason. The Microsoft Loading Bar Guard will and.

    When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

    If Windows is not loaded, you can enter the BIOS and hard drive model number in the list. You can also open your computer and look at the hard drive itself.

    Have you tried "F8" to enter in Windows 'Safe Mode' during the starting of the computer? Have you tried to use your disk to repair Windows to solve the problem?

    Please send BRAVO

  • Hello, I have two subscriptions how to cancel one of them

    Hello, I have two subscriptions how to cancel one of them?

    Hello

    Please cancel your subscription cancel your Adobe Creative Cloud membership

    Please contact customer service if you have questions.

    Kind regards

    Shelly

  • I have two computers, one running Windows 8.1, the other works in Windows 7.

    I have two computers, one running Windows 8.1, the other works in Windows 7.  I put Premier Pro, or a suite, on both computers at the same time?

    Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

    -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  • How will I know if I have all the drivers, my computer needs to work properly?

    Original title: hard drive

    How will I know if I have all the drivers, my computer needs to operate correctly

    Hi albertogon15,

    Information devices are listed in the Device Manager. If there is no fringe on any of the items in the Device Manager, it means that the device driver is working properly.
    See what is Device Manager?
    See also, get help with Device Manager errors.

    You can also check the Windows updates or visit the device/system manufacturer to see if there are updates available for the devices connected to the computer.
    See automatically get recommended drivers and updates for your hardware

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How will I know if I have a dvd burner? It says: dvd-rom/cd-rw on the console

    How will I know if I have a dvd burner.  It says: dvd-rom/cd-rw on the console.  I just upgraded from Windows Vista to Windows 7

    She say on the front door of the oprical drive?

    Readers of DVD-ROM DVD.

    DVD - RW is a burner.

    CD - RW CD burns.

    Apparently, you have a combo drive that will read... DVD and CD and burn CDs.

  • How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

    * Original title: windows 7 download

    I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

    It has probably comes with Windows 7 Professional 64 bit.

    You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    You can also use Windows 10 too as you have the right to it as a free upgrade:

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • How will I know if my flash drive has backed up all my data?

    Just bought a flash drive.  I figured out how to run a backup on the flash drive.  But how do I know if the flash player now has my files?  And which files actually need.  How to restore files should I have to?

    These questions can be answered by checking the help files or documentation for your backup program.  If you have used Windows backup as your backup, open help and Support and check the documentation for backup Windows.

  • How will I know if my Adobe Cs6 Design Web Premium license is for one or two computers. I can´t get any online support :(

    How will I know if my Adobe Cs6 Design Web Premium license is for one or two computers. I can´t get any online support

    Your license allows you to have the software enabled on both machines at any time.  If you need to have on another you would need to disable one of the two machines before you activate the new installation.

  • How will I know if a core I5 and 5400 RPM drive is ok for me or if I should get a core I7, 7200 RPM dr

    Buy a new laptop.  My old Dell Inspiron is giving up the ghost.

    How will I know if a core I5, disk 5400 RPM is quite enough for me or if I should get a core I7, 7200 RPM laptop drive?  Also can I get an I5 with 7200 rpm or 5400 RPM with an I7?  Need some recommendations.  I'm not an expert in computer so need a good explanation on what to do and why?  I don't have video games on the laptop.  It uses mainly for the mail, Excel, word, internet research, videos on the internet, etc.

    I'll use the Kudo.   Now I know what it is for.

  • How will I know if I have the full version of Photoshop elements 13?

    Enter the serial number for Photoshop elements 13 bought the full version but without using a CD. How will I know if I have the full version and not the trial?

    The two versions are identical. If you maintain a license with your serial number, so that you have a complete copy. Expert mode, you can check you are connected and turned on. Click on the menu help and if you see the words Sign Out (and email) all right.

Maybe you are looking for

  • protect mac phishing emails

    Hello I was wondering if anyone knows how I can protect my devices, MAC, iPad, iPhone phishing emails, or put a higher level of security on the enamel. See you soon Champion

  • With more than 14,000 modules, is there a data base to classify without going through each one individually?

    I had to reinstall Firefox (restart) and lost all my Add-ons. The list of Add-ons is now VERY LONG and I don't want to spend time looking at each one individually. Is it possible to separate them for example not watching those in foreign languages or

  • M6-1117tx dual drivers GPU?

    Hello I bought this model recently for occasional use, but what I noticed that windows update insists on 2 GPU drivers and HP website offers 2 GPU, AMD and Intel drivers. As I know the model has a Radeon HD 7000 series card. So should the two GPU dri

  • Windows Vista drive G is complete. How to clear up space?

    My logitech has nearly completing an update when the computer says my G drive was full and could not complete updates.  How to clear space on a drive of G?

  • Oh, Snap! Build request failed with the message: error

    Hello! I am working on an app for BlackBerry Playbook with WebWorks.  When I try to package it I get the error in the subject (Oh Snap! Application of Build failed with the message: error).  There is no more information.  I googled but can't find any