I have two computers, one running Windows 8.1, the other works in Windows 7.

Similar Questions

• Networking two computers - one running Windows XP and Windows 7.

  I just got this new laptop yeaterday which has Windows 7.  My other laptop that I am trying to network with some (or share a home group) works on Windows XP.  I have zero chance having these computers recognizing each other or another share.  Any ideas out there?  Thank you!

  Hello

  You use the work (Home) network, homegroup.

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}

• I bought a student permit and I guess use two devices, one in my pc and the other in the mac... maybe in the fact that I did a migration of a disc my pc and your server had counted twice... (?) Please let me know regards Edoardo

  I bought a student permit and I suppose to use on two devicesone in my pc and the other in the mac... maybe, I did a migration of a disk in my pc and your server had counted twice... (?) Please let me know regards Edoardo

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  Sign in your account of cloud on computer A or B to be able to use on computer C

  -via https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• I have two disks, a load with Vista 64, the other Vista 32. Can I integrate the 32 in the 64?

  I would like, with a minimum of functions software loss as Nero, etc are my new old VIsta 32 part, instead, a 64 bits two order install. Any suggestions?

  N °

  They are 2 different operating systems.

  You cannot merge together.

  You can delete one or the other.

  See you soon.

  Mick Murphy - Microsoft partner

• The desire to have identical screens 'connect' for both computers, both running Windows XP, SP3.

  I have two desktop computers, one running Windows XP Professional, SP3 and the other running Windows XP Home Edition, SP3. When I connect the computer professional, it passes through the boot info, then on the screen of Microsoft Windows XP with horizontally lights flashing and then having to display all users who said "to begin, click your user name." However, on the computer of the publishing house, he crosses the start screen, the screen of Microsoft Windows XP with horizontally lights flashing, but goes to a screen titled "Windows Journal" and asks for my username and password.

  What should I do to get the computer to the Publishing House to display the same "to begin, click your user name" with user names like the professional instead of the "newspapers Windows screen?"

  Thanks in advance for your help.

  zeredward

  First, go to control panel > user accounts, and then make sure the "Use the home screen" checkbox is checked. OK your way out.  See http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ua_logon_at_welcome_page_w.mspx?mfr=true
  If the box is already checked, see this--> http://www.kellys-korner-xp.com/xp_wel_screen.htm (scroll down to "the logon Welcome screen does not appear").

  If still no joy and you have ZoneAlarm or another "security suite", see June 1, 2010 post here--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-desktop/windows-xp-doesn' t-show-the-welcome-screen/e5c5af46-2839-47f3-b3d3-30e55ee74a1f?msgId=b7e70ce8-474c-42c7-a851-a68b5871aaaa

• I have 3 computers in a network; two Vista and one running windows 7. The computer of windows 7 can be placed in the network map.

  Hi, I have 3 computers on the network; two Vista and one running windows 7.  The computer of windows 7 can be placed in the network map (and I seem to be unable to it remote desktop).  This could be the cause?  I tried everything in the help documentation.  My router is a linksys 610n.  Computers have no NVIDIA cards or controllers.  Here's a screenshot of what I see in the network adapter:

  Hello

  Excellent Sam Job Varkey information should contribute to solve in this case, however some is
  Added information that can help as appropriate:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Skype on windows two computers, one a Linux

  I have two computers, windows, and Linux. Can I register on two computers with the same thing

  more details, or if I have two contracts?

  You can, but not at the same time I think

• I have two computers on the same router. One, on Xp and Eudora normally receives. The second on WIN-7 and Thunderbird receives the same messages in code -?

  I have two computers-
  On WinXp and Eudora receives emails in normal text.
  Sometimes, the other on Win-7 and Thunderbird receives the same message in code.
  Normally, this same message is received on the other computer.
  What have I've set wrong
  GerryMcDonald

  Start with view-> Message-> HTML Original body

• I have two computers that I downloaded my Photoshop. The one I just removed the program and the second

  I have two computers that I downloaded my Photoshop. An I just removed the program and the second I wiped the hard drive and returned to society. I have a brand new computer and am unable to install Photoshop because of the limit of two computers. How can I have access again.

  in the future, and if possible, disable (help > deactivate).

  for now, contact adobe for a reset of activation support, http://helpx.adobe.com/contact.html?product=flash&topic=using-my-product-or-service

• If you have two computers and you want to get your emails on both computers, how do you define it upwards so that all e-mail messages are downloaded to computers?

  Ianda have two computers, a desktop computer and a laptop. How do I set up so that all e-mails downloaded to computers?

  • What versions of Windows?
  • What email programs?

• Find the printer driver for HP all-in-one running Windows 8

  I just bought a HP Pavillion 23 all in one running Windows 8, I am trying to find a driver for an existing printer, Canon ImageClass D480 I have serious problems, thanks for any help

  Hi Jan,

  Welcome to the HP Forum!

  You will find not software Canon printer here on the site of HP - you have to find the Software Support Canon printer.

  Try here: imageCLASS D480 driver

  It seems there is a level of driver for Windows 8 support - if it is "full feature software" support or some form of basic driver support is something, you can determine when you visit the site and software.

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• I have two computers when connected to a hub, when I turn the two, I get an erroe message that says IP address conflict

  I have two computers both hooked up to a junction, when I turn the time I get an error message that says IP address conflict, can you please help?

  Hello

  What other network devices are connected.

  If it's only two computer and a hub, you will need to assign the computer with IP static.
  http://www.howtogeek.com/HOWTO/19249/how-to-assign-a-static-IP-address-in-XP-Vista-or-Windows-7/

• I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I want to erase the hard drive and use it to install windows xp.

  From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

  Does not help, but could help to point you in the right direction...

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.