No result when the command prompt is empty

Similar Questions

• How to hide the command prompt window when using exec system

  Hello, I use the exec system VI to do some transfers of files for a LabVIEW application.  I'm afraid that the black white scroll text command prompt window that appears when exec system is called might scare users this LabVIEW application non-tech savy.  Is there a way to hide the command prompt window?

  Feed a REAL running reduced entry.

  Mike...

• My computer guard goes to the command prompt and then closing when I try to open .exe files

  When I try to open an .exe file continues to go to the command prompt the closure as soon as it appears, as his tent to open a java file. After that, it showed all my icons symbol of java and wont open. The only thing that EOP are java files. I need to know if I should consider, or if it can be fixed manually.

  Hi MinecraftDude,

  Did you recent hardware or changes to the software of the system?

  You can consult the following article and the chek if it helps.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  Hope this information is useful.

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to avoid displaying the command prompt when the resumption of hibernation?

  How to proceed: in Control Panel, set the power Option when I press the power button to avoid display the command prompt during the recovery from hibernation, or use a script to close the command prompt at startup.

  Hello

  Thanks for posting your query in Microsoft Community.

  You can try the following steps and check.

  Press Windows key + R, type in msconfig and click OK

  Click on Startup tab, right-click on command prompt and click Deactivate

  Click OK

  Restart the computer and check.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• mxmlc - fails immediately when run at the command prompt

  Yes, I'm under flex 2 with java 1.6.
  I am able to write and run applications using the Flex Builder 2 IDE without problem.
  Wanted to compile the style sheet to use when running.
  He worked through the setting without problem.
  
  When I run mxmlc from the command prompt, Windows prompts with 'JAR Launcher has encountered a problem and needs to close. We are sorry for the inconvenience. »
  
  I launched the debugger VS, where I was able to get the violation, an unhandled 0x5c62696c in mxmlc.exe exception: 0xC0000005: reading location 0x5c62696c access violation.
  
  No idea or help is appreciated.

  My user error. Just removed all the following settings. It was a config problem.

• Problem with the format of the values in the command prompt (when you use multiple values)

  Hi all
  
  I have problem with the format of the values in the command prompt when you use multiple values.
  
  Value is year (2009) and when I use it in the drop-down list that is formatted, all right, as 2009, but when I use several values I get number as 2009,00. I put in year column format number with 0 decimal places and save by default in the year column. Year is formatted well anywhere in the query, such as 2009. Why is - what happens at the command prompt when you choose multiple values in prompt dashboard?
  
  Thank you

  I think the YEAR Data Type could be defined DOUBLE RPD.

  Use the CAST function in the formula (fx) and the output from test.

  CAST (INT YEAR)

  Hope, it will help you.

• Need help to fix a computer using the command prompt

  So, my computer has suddenly crossed an escalation of alarming events, culminating with a very desperate, me trying to get information on the "Command Prompt". I don't know why, how, and it's all heart-wrenching. If someone has an idea of what could be done to fix it, I'd certainly eternally grateful to them. I will try to be as detailed as possible, so I don't miss information that might be useful for someone who know how to use.

  I have an Acer Aspire V5 - 573G, running under Windows 8 64-bit with a 12G RAM, about 1 year and a half old, and this is the story of his unexpected collapse.

  3 days ago the computer suddenly began to show extreme problems with the help of any program. I had let him sleep for a few hours, and when I came back all started running very slowly.
  At the beginning I'm not too worried about I have mostly ran programs dependent on Internet and thought it was a simple connection problem. I have conducted a malware check (which I use quite regularly anyway) and downloaded Avast to see if he could detect all viruses, but everything was fine.

  However, after that them stopping and turning back on the morning, things only seem to be deteriorating. I was not using my computer much at all, but after the second day of the fight with all that I realized that in Task Manager, something was really wide, and the drive was 100% use even when nothing was running.
  Usually, after a few minutes it would go back down to 1-2%, but as soon as I ran whatever it is, even simply open Control Panel, happen very quickly to 100 times (sometimes the Task Manager was sufficient to make this happen).

  I removed Avast and tried to delete the process when I made sure it was safe to do so, but it did not work. I tried after tutorials on the Internet for people who reported similar problems, which led me on a desperate journey funny through Windows Defender removal, an (unnecessary) extreme increase virtual memory (which I brought to the standard after that report maybe just made even slower computer), something to change the parameters of High-Performance mode so that the Hard Drive would never turn off has tried to stop the search and indexing in my session, make a small altar to Turing... nothing worked.

  I ran a chkdsk /f C: who found problems with indexing files / indexed and likely fixed, because when I ran simple verification once the computer has been again this topic found no problem. However, the situation was the same: essentially constant use of the disk of 100% and no way out.
  A sad moment, after hours of attempts, I stopped by mistake the wrong process, explorer.exe. I restarted the computer, and then the problem was still there, at least explorer.exeseemed fine.

  However, when a few minutes later, I rebooted the computer, even once, I couldn't access the desktop more and I found myself in a loop of reboot attempt that has nothing, attempted to retrieve an earlier version of the system but nothing happened.

  The only thing I can do is access chkdsk to see what the problem is, but I'm not sure that I could see a way out of this, even if there was a. The only thing that seems clear is that there is a lot of damaged clusters, that he can't solve.
  This morning I ran 2 other chkdsk /f c:, the results by saying that there was no problem and no further action was required.
  So I ran a C: /R, and once again he told me that there are some clusters damaged in this file.

  Is there something I can do? Someone has an idea of what could have happened?
  My idea was to wait for it to perform this check, run a chkdsk /f /r c: and see how it goes if I restart it, but I could really use advice from more experienced and skilled people.

  The computer has not received any physical damage, not even in the relatively distant past of her young life. Before he started having all these problems he did nothing particularly requiring either, just running a few innocent Assassins Creed II (with 11.9 available RAM for what I remember stats and a Nvidia GeForce GT 750 M, I think not that it should have been a source of so much distress). This is the first time it gives me problems.

  Also, I apologize if any information was unclear or confused, but not only am I a tragedy with computers, I also use a computer in a different language and a few technical terms could have been translated a little too big. If someone needs more information, I can do my best to give it.

  Hello

  Windows Defender is the default Antivirus which comes with Windows 8 and should not have been "removed."

  @@@@@@@@@@@@@@@@@@@@@@@@

  Reinstall your operating system:

  Here are the instructions Acer for recovery to factory settings, new condition.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  See you soon.

• Aggregate in the command prompt values

  Hello

  My Table.Column has below values:

  A

  B

  C

  D

  E

  I want to show: A, B, "BOTH" in the dash prompt.

  When A or B are selected in the command prompt, the respective values are supposed to go to the report; and when "BOTH" are selected both A and B must be passed to the report.

  Appreciate any ideas or advice.  Thank you very much in advance.

  Hello 920424 ,

  You can create a group to do this.

  Here are the steps to follow:

  • Create an analysis on this topic and go to the tab results click the icon with 3 blue points and a star in the menu bar.
  • Create your group by selecting a display label ('TWO') and by selecting the column and the value you want to put inside (A and B)
  • Spend the selection steps pane at the bottom of the screen and click on your group (BOTH)-->Group Save as... and save it in the subject area content folder.
  • In your guest Dashboard spend Options , add the same column and lookup values , select the values of specific columns, and then click the Plus sign.
  • Add A and B of the values in columns pane and add your component catalog group.

  Here you are.

  More info on the Group and calculated items: http://docs.oracle.com/cd/E23943_01/bi.1111/e10544/filter.htm#CJAHGBBE

  How to save: filtering and selection of data analysis - 11 g Release 1 (11.1.1)

  It will be useful.

  Kind regards

  JeromeFr

• default selection in the command prompt

  Hello
  
  With the help of obiee 11.1.1
  I created a variable presentation in the command prompt using sql result.
  
  Using this prompt in my... e anaysis.i which I use in the filter.
  
  Initailly when I run the dashboard because no value is selected in the filter performances without results found
  No results
  All data is not cause to the specified criteria.
  This is often due by applying filters and/or selections that are too restrictive or contain incorrect values. Please check your filters to analysis, and then try again. The currently applied filters are listed below.
  
  
  M_NAME is equivalent to / in VarMName
  
  Wharton I want is
  Scenario 1-> what to make sure the results no msg would not come and just the filter should be displayed.
  or
  Scenario 2 - display all the filter values in the report initially that is as if one has chosen the value of filter.
  or
  Scenario 3-> by default select one filter and show the result for this.
  
  I want to know how to do the 3 scenarios?
  
  Thank you

  Hello

  Similar to scenario 2 and 3 for me (may be mistaken) creating fast, you can set the default values for all the choices or any desired value so that the report can show for all values. But I was wondering where you use this variable presentation (I mean for the calculation or any other object)

  Scenario1 can be reached certain that using any results display in the results tab, but I'm not sure if you can show filters here or not. But when you don't get any results, there are cases where it shows what are the filter condition has been applied in the report.

  Phani.

• Satellite L - can I add new accounts via the command prompt?

  Is it possible that I can add new accounts to the machine via the command prompt on the screen of "recovery"?

  (When you start in recovery mode and select command prompt)

  I tried the normal commands "net user username / add ', but the accounts are not added to the machine.

  Y at - it another command which can be used?
  Thank you.

  Hello

  I don't know if it will work using the in my opinion Mr. recovery console, it is not possible.
  As far as I know that you can add the user and the password using the CMD, but this might work only when the Windows operating system has been loaded.

  In this case, you can use this command to add the user account: + net user username / add +.
  If you want to add a password for the user account, then you must use this way: + net user username password / Add +.

• a way to talk to the command prompt without using exec.vi system

  I had used exec.vi system in recent weeks to send commands to the command prompt and then bring back the exit in labview. All of a sudden this week the vi does not work and I can not even an exec.vi system output when I send the same commands that I sent before. I was wondering if there was another way to send & receive orders from the cmd prompt in labview without using exec system?

  
  

• XP Pro do not include USB drives in the command prompt, but are listed in my computer

  I'm having problems with my CD/DVD drive (not written) and I'm doing a bootable ISO... file flash memory this procedure requires using the command prompt: diskpart, list disk, etc. when I get home "list disk" all I get is the HARD drive... USB key is not there... it's listed in my computer and in the remove hardware in the system tray... even in the BIOS there is a USB bootable devices...

  Any help will be appreciated, because I need to see the flash memory in the command "list disk".

  Thanks in advance!

  Hi abbasbd,

  Follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• On windows, the command prompt window (XP) start appears and closes what can be the problem

  On windows, the command prompt window (XP) start appears and closes with 2 to 3 seconds what can be the problem

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you put the computer in mode normal startup such as suggested in the article.

  Check if that helps.

• How do you do the command prompt window stay open after running a command?

  OK, I feel stupid asking this, because I knew the answer before. I learn Visual C++ programming. The book I learn to write C++ and past then in details on the writing of the GUI from Visual C++ part. The book that I market me through compilation and to make an exe file in a cpp file, and then he said: go to the directory in Explorer and double click on the exe file. I do, and the command prompt appears a quick second before closing down. The example in the book shows the output, and the writer obviously has his guest configured to pause after executing an exe file.

  I just set up my guest to do the same thing, so I can at least see the results. I know that running the exe I wrote, but I would like to see the output for less than a second.

  I don't know how you code this. But if it's like a normal batch or whatever it is command line related.

  Follow these steps to use a switch defined by the user at the end of the script.

  To pause a file of DOS commands under Windows XP, continue to the next command, you can use the PAUSE command. Make request to the user with the text:

  Press any key to continue. . .

  Then the batch file is waiting for the user to press a button. However, if you want to pause a batch file and display anything? Simply redirect the results to no one as follows:

  pause > null

  Given that it is perhaps not very useful (how will the user know they need to press a key to continue the batch file?) you display a different prompt. Issue a command with your desired guest ECHO, and then issue the break preceding > no command.

  For example, to pause a batch file of Windows XP with the prompt "Press ENTER to run the command", use the following commands:

  echo press ENTER to run the command
  pause > null
  MCP. MCDST. LVL 80