XP Pro do not include USB drives in the command prompt, but are listed in my computer

Similar Questions

• Mapping network drives through the command prompt to another user

  Right now I am implementing a batch file that will map the readers of network for other user accounts. Currently, I can only card readers for the connected account and no one else. Is there a way to do it through the command prompt, or I have to use powershell. Really, I'd rather it be done through the command prompt as I already all the completed script, with the exception of this part.

  Thank you

  EDIT: After further review, I conclude that there is no possible way to do it. Simply, it is not included in all orders that I could find. If someone finds, then great, but if not, like I did is as follows:

  Check the user credentials against a master list which also has passwords.

  Once a match, use this user name and corresponding password.

  Run this to authenticate by using the Group Policy Editor.

  You can map drives with group policy or by using a startup script (= batch file) that contains one or more of the following commands:

  NET use / persistent: no
  NET use q: \\ServerName\ShareName / User: David SomePassword

  NET use q: \\ServerName\ShareName / User: David *.

  Note that the incorporation of the passwords in a batch file is a serious safety hazard that is why the second command is preferable.

• cannot get rid of message not recognized usb driver

  After I installed windows8, that I tried to install a t-45 printer easyjet by hp windows did not have a driver and hp did not have a driver because the printer is too old. now, I get the message that the usb device was not recognized.  Microsoft thech support could if stop and chat with Microsoft did not help. I don't have the printer installed, but I can't n9ot to get rid of the message. any suggestions?

  Hello

  Thanks for the reply with the status.

  You use a desktop or laptop computer? What is the make and model?

  If you are using a laptop, I suggest you disconnect all external devices, remove the battery and keep it idle for 5 minutes. This would allow the motherboard drain his power. After 5-7 minutes, we can re - insert the battery and check with the question.

  Hope this information helps.

• I bought a copy of lightroom, but my new macbook pro is not a hard drive to install

  I bought a copy of lightroom, but my new macbook pro is not a hard drive to install

  Download and install a copy of Adobe's Web site and enter your serial number to authorize.

  Lightroom 5.2 for Mac

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5647

• Adobe PS CS4 do not 'see' my USB Drives in the Finder

  For some weird reason, PS CS4 is no longer "find" my USB 2 TB disk in window Finder/devices on my iMac (nothing is displayed in devices).  However, it is to see my readers of my WD NAS, and if I go in the Finder on mine, it shows USB drives.  The WD drives are a MyBook of 2 TB and a MyCloud TB 3.  I had some problems with _those_ readers appear in the Finder, but its usually a WD firmware issue... and his generally more MyBook drive that gives me problems.  Anyway... the USB 2 TB above also appears (as it should) on the RIGHT side of my iMac screen.  The drive works very well, and I tried to always turn off the computer and the USB key... don't show using Photoshop.  I can search in the finder to the file I want, and then right-click to open in "Adobe Photoshop", but I'm so used to enter, edit and save files in CS4 that I am puzzled that this player all of a sudden cannot be 'seen' leave in PS CS4.  Previously, he had been, so I assume its a few parameters or issue preferences?

  Hi DrGrafix,

  Can you please try to activate a new user account and check if the PS CS4 is able to locate your USB key.

  See the article on how to create new account below.

  http://support.Apple.com/kb/ph6651

  Please post on the Adobe forums.

• Connect my phone: not found a driver for the unknown device

  USB port

  wanted to connect my phone to the computer, says "not found a driver for the unknown device" what to do?

  View your manufacturers of mobile phones and FAQ about the connection to win7 support

• I need to copy files from my USB DRIVE to the vmserver running RHEL 5

  I need to copy files from my USB DRIVE to the VMSERVER running RHEL 5

  I can tether the drive to my host, but my VMserver does not see the drive.

  Is there some way to copy files from to the VMserver USBDISK create through vSphere, ESXi

  bndwork

  Moved to VMware Server------General questions forum.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Windows 7 network drive displayed in the command window, but not in Explorer!

  Hi all

  I have several problems with mapping network drives between W7 x 64 business computers. All computers entirely patches, are part of the same network and home group (which is not part of a domain) and I'm looking in the file share on the shares created on the primary computer.

  Share 'Backup' (for example) on the primary computer has all necessary for the 'Me' user access rights, which exists on both computers and is active. When I try to map a drive to the action using the Explorer, I get the error "the folder you specified is currently mapped using a different user name and password... "even if nothing is currently connected to this computer and the command" net use * / d "returns no entries.

  Using an admin command window, I can not able to map any drive sharing using "net use x: \\mainPC\Backup/user: me mypassword" command. The disc is available in this order, but DO NOT SHOW IN EXPLORER window! (Sorry, I am really angry now). Dir command shows all the files, I can create folders and copy things under the command window, but the command 'Start x:' returns the error "x: refers to a location that is not available...". "(pull the hair!)

  Your help with this problem is greatly appreciated.

  Ray!

  What you observe is by design. Mapped network resources are visible only in the session that created them, but not in other sessions. What makes them universally visible would be a breach of security.

• with win 64 pro 8 comment get a driver for the epson stylus color 500 rx scan

  with win 64 pro 8 comment get a driver for the epson stylus color 500 rx scan

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Hello

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  
  http://support.Microsoft.com/common/international.aspx

• I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  check your directory program files adobe > first pro cs6 > first pro.exe file.

  (restart the cc app will probably also work.)

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out

  I got a new hard drive in my computer and the old a subscribed.  I then had to reinstall Windows XP Pro.  In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out.  The new shows of unallocated hard disk without a drive letter and has a black bar above it. How do I show my new hard drive that is 1 TB instead of one that was a 250 GB is not yet in my computer.

  Hi Reta,

  ·         The drive appears like 250 GB even if it's a terabyte?

  ·         Is the remaining 750Go showing as unallocated disk space?

  If this is the case, you can refer to this article on how to use disk management in Windows XP:

  How to use disk management to configure dynamic disks in Windows XP

  You can follow the directions to extend a Simple Volume so that your 250 GB turns into a single terabyte.

• Windows Explorer says he has stopped working and it does not restart. I tried the system restore, but will not return to explore

  I can't get rid of this pop up asking to restart or online solutions. I chose these two options in the last days and even managed to get into the restoration of the system (not easy without windows), but nothing works and I'm about to throw this pop up window with my laptop.

  '

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• I have a Macbook Pro 2015 retina and I wonder how the cycles of battery are calculated?

  I have a Macbook Pro 2015 retina and I wonder how the cycles of battery are calculated?

  If I load to 100% and then run it down on battery to 0% of course it counts as a battery cycle.

  If I recharge to 90% and run up to 5% or 10%, which count as a battery sprays?     Between what % are there?

  The reason I ask is that I try to keep the cumulative battery cycle count down.

  Thank you

  http://www.Apple.com/batteries/why-lithium-ion/

  Whenever he finishes a full charge, it's a cycle.  If you charge 70% one day, then 30% another day, it's a cycle.

  The Apple site, I posted above, it explains very clearly.

  A cycle is counted when the battery has completed a 100% charge, not a discharge.

• I have no sound via the USB plug in the headset. But I do get sound by analog means. Everything takes? s

  I get no sound through my USB plug in the headset. But I do get sound by analog channel on my set of speakers. Everything takes?

  I would check the Manager devices to see if all your sound drivers are installed and working.  Click Start, right-click computer, and click Properties.  Then click on Device Manager.  If none of the entries have exclamation points or question marks, you need to get a Windows 7 compatible driver for them.

  I hope this helps.  Good luck.