No signals appear on the tab of NOR-XNET Bus Monitor signals

Similar Questions

• Is it possible to save a configuration with NOR-XNET Bus Monitor?

  I'm trying to transition to use Vector canoe to use NOR-XNET Bus monitor.

  In Bus monitor is it possible to save the settings of the interface and the signals tab setting?

  Do not think that as Bus monitor, it's more like a low level tool to see if things work.  Very little effort seems to have entered the user experience or user interface.  OR prefer generally to develop tools, which you can use to request a wonderful, they generally don't do this wonderful application themselves.

  I would look at a few examples in LabVIEW, by going to help > find examples to see if any of these get close to the functionality you're looking for.  Then you can use as a starting point for your own application.

• NOR-XNET Bus Monitor does not detect port

  Hi all

  I need somehelp. I have 2 PXI-8512 and assembla CAN1 CAN2, CAN3 and MAY 4.
  I want to control my XNET data traffic. Yes, they are available in MAX. But once I open the monitor of Bus OR-XNET, every channel I have are not detected.  Interface name box is empty, does not show anything.

  Here is a screenshot.

  

  Someone knows what's the problem?

  Thanks for help.

  Rajamodol

  Hey Rajamodol, Nicola.

  I'm sorry, but this is a limitation of the distant targets in XNET bus monitor. See the following Knowledge Base article:

  Why can I not see my NOR-XNET CAN interface on my remote target in Bus monitor? -National Instruments
  http://digital.NI.com/public.nsf/allkb/92F10284E8061FB68625793600484D79?OpenDocument

  The article also mentions an alternative, where you use an example VI for a similar feature.

  Best regards

  Christoph

• How can I change the appearance of the tabs?

  I just got the update of firefox on my PC (windows 7) and the legs are difficult to see and navigate between them makes my (research) work extremely frustrating. Can I change the appearance of the tabs stand out more or go back to the old version of firefox?

  1. Install Stylish and restart Firefox when prompted.
     • https://addons.Mozilla.org/firefox/addon/stylish/
  2. On the next page, click on the button install.
     • http://userstyles.org/styles/101036/brighter-background-tabs-australis-Firefox-29

  If you prefer the old look instead, see the following article.

  • How to make the new look of Firefox as the old Firefox

• How can I get the tabs group names appear above the tabs?

  At some point the names of all of my tab groups appeared above the tabs. In other words, there is a horizontal list of open tabs on each page. Above that there was a similar list of horizontal search all groups tabs. This horizontal list of tab groups is now missing.
  This has been useful to reorganize and re-classification of the tabs into different groups because I could see the entire page for any given tab and could move the tab to another tab group simply by clicking on the tab and dragging to any group in the section tab above the tabs section groups. It's usually easier than reorganization of the tabs on the tab page groups (accessed by clicking on "Your group tabs" icon top right of the screen).
  I don't know how this feature got there or why he went, but I liked it.
  How can I get that back?

  I agree. It is a very impressive device available through an add-on that is no longer supported. It would be really useful for me tab groups.

• I just installed photoshop elements 14. the photomerge menu does not appear on the tab improve? I can only find it on the guided edits. Is that how it is supposed to be?

  I just installed photoshop elements 14. the photomerge menu does not appear on the tab improve? I can only find it on the guided edits. Is that how it is supposed to be?

  Hi rpwines

  Fuse are now under guided edit

  You have it the way it should be.

  

  Please consult help of Photoshop Elements | Guided - mode Photomerge edits

  Gor Features.See new more using Photoshop Elements. What's new in Photoshop elements 14

  Concerning

  ~ Assani

• Text blocks all appear in the tab order?

  It is a recent thing, I noticed. I have imported a Word document, and all non-fillable text blocks are appearing in the tab order. Is there a way to tell LS to include only the user interactive fields in the tab order?

  Curiously, when I preview the form, the tabs stop only in the fields, so it runs very well on the end of the user. It's mostly just a gene of design because when you configure the tabs, there are so many blocks of text that I have to work around.

  Screenshot below.

  

  JO

  Hi Jo,.

  Just for your information. Have you checked if you did the next thing?

  Tools-> Options-> tab order-> and select Show only tab order for fields.

  Thank you

  Sidonie.

• Sync symbol does not appear in the tab header

  In the version of Android, Firefox, I configured my e-mail address of synchronization, but the sync symbol does not appear where it should (except the symbol of private browsing). The desktop version of Firefox is properly set up with my account, so I have no idea what I can do now to make it work? Thank you.

  Hi snoreau, the tabs sync on android have moved into their own group of experts on the home screen (also known as awesomescreen).

• Weird with the blue circle bar appeared above the tabs

  HI - last night, shortly after (not sure how long exactly) after installing Silverlight - direct on the preferred video amazon site, a strange white bar with a blue circle ringed appeared above my tabs in the browser. I do not think that it appeared directly after the installation of Silverlight, but some time later - during which I was on and off my computer - it 'appeared '...

  Here is a picture:
  http://imgur.com/WezuIoV

  And a mode of incognito, that shows something, but I do not know what...
  http://imgur.com/MlhJKbt

  I tried to disable the silverlight plug - nothing; I tried to play around with the Settings toolbar - nothing; then I restarted with modules disabled (in the Help menu) and it disappeared. But then when I restared in normal mode - it was always there... I need to reset (which probably do disappear, but I want to know what caused it)? Can I have some sort of bug? I'd be worried, virus (maybe it is excessive; I'm on a mac, but...)?

  Thanks for any help

  I fell on this particular issue so the other day. It turned out not to be any of my extensions the cause, but instead, it was a theme called "Default Mod" (which was updated to version 28 February 27). I've downgraded to version 27.1 and the blue circle went.

  EDIT: Looking at your screenshot, it seems that use you the default theme Mod as well, so it's most likely the problem.

• I want to open links, I click on to appear among the tabs at the end (to the right) of my browser. Is there a way to control the order of the tabs?

  I find it confusing that when I click on a link, the new tab for this link opens somewhere in the middle of my line of tabs. I would have preferred that the new tabs would appear and the (right) end of the alignment of the tab. I see no way to control the order of tabs in Firefox. Is there a way to accomplish what I want?

  Type of topic: config in the URL bar and press ENTER.

  Answer Yes.

  Filter = browser.tabs.insertRelatedAfterCurrent

  Double-click this preference to activate it false.

  Then restart Firefox.

• How can I remove the hover bubble that appears on the tabs

  Using CS5, whan I have several open images, it will open in tabs that I like. However, when I put my cursor on a tab, a bubble will appear that says exactly the same thin for this tab. However, with the bubble it I can't click the tab below to select or remove it.

  It's actually a huge problem when I do camtasia videos where I want to swith bettween tabs during a voice unit because I can't select different tabs smoothly.

  How can I do if nothing shows up when I put my cursor on a tab (I want to continue to use good tabs. This feature is great)

  

  I think maybe it's that John_Bone_Jones has the quite high set of scaling of dpi making it much bigger than normal ToolTips.

  This how I normally see in cs5 on windows 7:

  

• When you download the new Firefox, he did the preferences Options appear in the tabs. where is the option to make a pop-up window?

  In previous versions of Options under the Tools Menu of Firefox window was a separate Firefox window. With the new update they put in the tabs that majorly clutters the space and it is difficult to go back to what I was already looking upward. Y at - it an option to the Options window to a pop up or do I have to install a previous version of Fire fox?

  Hi, you can go back to the old window Options by: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.preferences.inContent and double-click on it to change the "value" from true to False, taking care to not to change what anyone else. You will then need to restart Firefox.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Smartphones from blackBerry Torch 9810 - new applications do not appear in the tab all

  I've recently upgraded to a Torch 9810 with OS7 on it. Started installing apps (done a clean install of Apps instead of installing from a backup or anything like that), but when I went to run the application, I could not find in the tab all.  But when I go into Options > device > application management, it shows the program installed. So I tried to install other apps and the same thing happened.

  So I took a picture of something and went in the Media tab to see photos. And here there are all the Apps that I have installed in the Media tab. Then tried to move them to the all tab and he'd let me, only allowed me to move the application to a different location on the media tab, and not to another tab.

  So first, how can I get the Apps install in the right folder? Secondly, how can I move the Apps that I have installed it in a different tab?

  Thank you.

  From your home screen, press the BB menu key.  In the menu, you will see two things you might be interested in setting... Manage the panels and Options.

  Manage panels to configure how many panels you want to use.  I chose only the Panel all, so everything gets displayed here.

  In the Options, this is where you tell your device where you want to store Applications downloaded in the "download folder".

• Why did 'My images' appear on the tab library "my videos"?

  for some reason any the "My pictures" folder appears under the folder "my videos." Why this keep happening? and how I permanently fix this?

  PS: I tried to delete the folder 'My images' from the 'My videos' folder in the library... view but finally my photos appears again out of nowhere.

  Hello

  Thanks for joining us out on Microsoft Community Forums.

  It looks like 'My pictures' folder guard re-appearing in the "My videos" folder We will analyze and identify the cause of the problem.

  Try to restore the folders in the library to its original state.

  This will remove the current library and rebuild a new.

  To do:

  1. right click all folders in the library.

  2. right click on libraries and click on restore default libraries. This should restore the library.

  Note: The library files will not be deleted.

  Reference:

  Libraries: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/libraries-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• How can I make each option button appear in the tab order?

  When users tab through the form, the tab highlights only the first radio button of a group before moving to the next field or group of fields.

  Example: he is asked to the user for the following information: name, gender (M/F option boxes) and date of birth.

  When Tab through the form, users are taken from the LastName field to the male radio, for the Birthdate Field button. Never does the tab allow them to select the female unless they they click on it with the mouse.

  It seems like it should be a simple solution, but I can't find it anywhere!

  Thanks for your help.

  It's their way of work. Imagine a group of buttons radio as a combo box or a list. When one of these types of field receives focus, you can use the arrow keys to navigate through the options and the tab key moves to the next field.

  If you configure the group using the check boxes instead, everyone in the group that gives the same name, but different value of exports, they will behave as you wish. A group of checkboxes behave a little different than a group of option buttons, but it's close.